mbed library sources
Dependents: frdm_kl05z_gpio_test
Fork of mbed-src by
Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/PeripheralPins.c
- Revision:
- 279:26b9e96a0278
- Parent:
- 274:6937b19af361
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_MCU_LPC11U35_501/PeripheralPins.c Mon Aug 11 14:00:06 2014 +0100 @@ -0,0 +1,117 @@ + +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "PeripheralPins.h" + +/************ADC***************/ +const PinMap PinMap_ADC[] = { + {P0_11, ADC0_0, 0x02}, + {P0_12, ADC0_1, 0x02}, + {P0_13, ADC0_2, 0x02}, + {P0_14, ADC0_3, 0x02}, + {P0_15, ADC0_4, 0x02}, + {P0_16, ADC0_5, 0x01}, + {P0_22, ADC0_6, 0x01}, + {P0_23, ADC0_7, 0x01}, + {NC , NC , 0 } +}; + +/************I2C***************/ +const PinMap PinMap_I2C_SDA[] = { + {P0_5, I2C_0, 1}, + {NC , NC , 0} +}; + +const PinMap PinMap_I2C_SCL[] = { + {P0_4, I2C_0, 1}, + {NC , NC, 0} +}; + +/************UART***************/ +const PinMap PinMap_UART_TX[] = { + {P0_19, UART_0, 1}, + {P1_13, UART_0, 3}, + {P1_27, UART_0, 2}, + { NC , NC , 0} +}; + +const PinMap PinMap_UART_RX[] = { + {P0_18, UART_0, 1}, + {P1_14, UART_0, 3}, + {P1_26, UART_0, 2}, + {NC , NC , 0} +}; + +/************SPI***************/ +const PinMap PinMap_SPI_SCLK[] = { + {P0_6 , SPI_0, 0x02}, + {P0_10, SPI_0, 0x02}, + {P1_29, SPI_0, 0x01}, + {P1_15, SPI_1, 0x03}, + {P1_20, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MOSI[] = { + {P0_9 , SPI_0, 0x01}, + {P0_21, SPI_1, 0x02}, + {P1_22, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_MISO[] = { + {P0_8 , SPI_0, 0x01}, + {P0_22, SPI_1, 0x03}, + {P1_21, SPI_1, 0x02}, + {NC , NC , 0} +}; + +const PinMap PinMap_SPI_SSEL[] = { + {P0_2 , SPI_0, 0x01}, + {P1_19, SPI_1, 0x02}, + {P1_23, SPI_1, 0x02}, + {NC , NC , 0} +}; + +/************PWM***************/ +/* To have a PWM where we can change both the period and the duty cycle, + * we need an entire timer. With the following conventions: + * * MR3 is used for the PWM period + * * MR0, MR1, MR2 are used for the duty cycle + */ +const PinMap PinMap_PWM[] = { + /* CT16B0 */ + {P0_8 , PWM_1, 2}, {P1_13, PWM_1, 2}, /* MR0 */ + {P0_9 , PWM_2, 2}, {P1_14, PWM_2, 2}, /* MR1 */ + {P0_10, PWM_3, 3}, {P1_15, PWM_3, 2}, /* MR2 */ + + /* CT16B1 */ + {P0_21, PWM_4, 1}, /* MR0 */ + {P0_22, PWM_5, 2}, {P1_23, PWM_5, 1}, /* MR1 */ + + /* CT32B0 */ + {P0_18, PWM_6, 2}, {P1_24, PWM_6, 1}, /* MR0 */ + {P0_19, PWM_7, 2}, {P1_25, PWM_7, 1}, /* MR1 */ + {P0_1 , PWM_8, 2}, {P1_26, PWM_8, 1}, /* MR2 */ + + /* CT32B1 */ + {P0_13, PWM_9 , 3}, {P1_0, PWM_9 , 1}, /* MR0 */ + {P0_14, PWM_10, 3}, {P1_1, PWM_10, 1}, /* MR1 */ + {P0_15, PWM_11, 3}, {P1_2, PWM_11, 1}, /* MR2 */ + + {NC, NC, 0} +};