Diff: targets/TARGET_ONSEMI/TARGET_NCS36510/pwm_map.h

Revision:

149:156823d33999

Child:

150:02e0a0aed4ec

diff -r 21d94c44109e -r 156823d33999 targets/TARGET_ONSEMI/TARGET_NCS36510/pwm_map.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ONSEMI/TARGET_NCS36510/pwm_map.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,100 @@
+/**
+ ******************************************************************************
+ * @file pwm_map.h
+ * @brief PWM HW register map
+ * @internal
+ * @author ON Semiconductor
+ * $Rev: 3378 $
+ * $Date: 2015-04-28 13:38:36 +0530 (Tue, 28 Apr 2015) $
+ ******************************************************************************
+ * Copyright 2016 Semiconductor Components Industries LLC (d/b/a “ON Semiconductor”).
+ * All rights reserved.  This software and/or documentation is licensed by ON Semiconductor
+ * under limited terms and conditions.  The terms and conditions pertaining to the software
+ * and/or documentation are available at http://www.onsemi.com/site/pdf/ONSEMI_T&C.pdf
+ * (“ON Semiconductor Standard Terms and Conditions of Sale, Section 8 Software”) and
+ * if applicable the software license agreement.  Do not use this software and/or
+ * documentation unless you have carefully read and you agree to the limited terms and
+ * conditions.  By using this software and/or documentation, you agree to the limited
+ * terms and conditions.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS".  NO WARRANTIES, WHETHER EXPRESS, IMPLIED
+ * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
+ * ON SEMICONDUCTOR SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL,
+ * INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
+ * @endinternal
+ *
+ * @ingroup pwm
+ *
+ * @details
+ * <p>
+ * PWM HW register map description
+ * </p>
+ *
+ * <h1> Reference document(s) </h1>
+ * <p>
+ * <a href="../../../../build/doc/pdf/IPC7205_PWM_APB_DS_v1P1.pdf" target="_blank">
+ * IPC7205 APB PWM Design Specification v1.1 </a>
+ * </p>
+ */
+
+#ifndef PWM_MAP_H_
+#define PWM_MAP_H_
+
+#include "architecture.h"
+
+/** Power management Control HW Structure Overlay */
+#ifdef REVB
+typedef struct {
+    __IO uint32_t DUTYCYCLE;
+    union {
+        struct {
+            __IO uint32_t ENABLED :1;/**< 1 = PWM enable , 0 = PWM disable  */
+            __I uint32_t CURRENT :1;/**< current state of PWM enable signal  */
+            __O uint32_t PAD1 :6; /**< Reserved. Writes have no effect; Read as 0x00. */
+            __O uint32_t RDPWMEN :1;/**< current state of pwmEnable configuration  */
+            __O uint32_t RDPWMOP :1;/**< current state of PWM out signal  */
+            __O uint32_t PAD2 :6; /**< Reserved. Writes have no effect; Read as 0x00. */
+        } BITS;
+        __I uint32_t WORD;
+    } PWMOUT;
+    __O uint32_t DISABLE;
+    union {
+        struct {
+            __IO uint32_t ENABLED :1;
+            __O uint32_t PAD1 :7; /**< Reserved. Writes have no effect */
+            __O uint32_t STATE :1; /**< current state of prescaler enable configuration. */
+            __O uint32_t PAD2 :7; /**< Reserved. Writes have no effect; Read as 0x00. */
+        } BITS;
+        __I uint32_t WORD;
+    } PRESCALE_EN;
+
+    __O uint32_t PRESCALE_DIS;
+
+} PwmReg_t, *PwmReg_pt;
+#endif /* REVB */
+
+#ifdef REVD
+typedef struct {
+    __IO uint32_t DUTYCYCLE;
+    union {
+        struct {
+            __O uint32_t ENABLE :8;          /**< Write any value to enable PWM output */
+            __I uint32_t PAD :1;             /** < Pad */
+            __I uint32_t ENABLE_STATE :1;    /**< Current state of pwmEnable configuration bit.  ‘1’ PWM output is enabled.  ‘0’ PWN output is disabled. */
+            __I uint32_t OUTPUT_STATE :1;    /**< Current state of PWM output */
+        } BITS;
+        __IO uint32_t WORD;
+    } PWM_ENABLE;
+    __O uint32_t PWM_DISABLE;
+    union {
+        struct {
+            __O uint32_t ENABLE :8; /**< Write any value to select enable the 4-bit prescaler */
+            __I uint32_t STATE:1; /**< Current state of the prescaler.  ‘1’ the prescaler is enabled.  ‘0’ the prescaler is disabled. */
+        } BITS;
+        __IO uint32_t WORD;
+    } PRESCALE_ENABLE;
+    __O uint32_t PRESCALE_DISABLE;
+} PwmReg_t, *PwmReg_pt;
+#endif /* REVD */
+#endif /* PWM_MAP_H_ */