Diff: main.cpp

Revision:

1:818cf7a97804

Parent:

0:f76708a93fb3

Child:

2:44f1e5803762

diff -r f76708a93fb3 -r 818cf7a97804 main.cpp
--- a/main.cpp	Sat Oct 15 14:15:55 2011 +0000
+++ b/main.cpp	Tue Aug 06 10:01:08 2013 +0000
@@ -1,158 +1,134 @@
 #include "mbed.h"
 #include "mbedOSC.h"
 
-DigitalOut myled(LED1);
-
 // mbed IP address (server):
 #ifdef DHCP
 EthernetNetIf eth;
 #else
 EthernetNetIf eth(
-  IpAddr(10,0,0,2), //IP Address
-  IpAddr(255,255,255,0), //Network Mask
-  IpAddr(10,0,0,1), //Gateway
-  IpAddr(10,0,0,1)  //DNS
+    IpAddr(192,168,12,210),//your mbed IP Address Set
+    IpAddr(255,255,255,0),//Network Mask Set
+    IpAddr(),//Gateway
+    IpAddr()//DNS
 );
 #endif
 
+//baud rate
+int BAUD_RATE = 115200;
+
 //uint8_t serverMac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
-uint8_t serverIp[]  = { 10, 0, 0, 2 }; // not needed perhaps!
-int  serverPort  = 10000;
-  
-uint8_t destIp[]  = { 10, 0, 0, 1};
-int  destPort = 12000;
-  
-char *topAddress="/mbed";
-char *subAddress[3]={ "/test1" , "/test2" , "/test3" };
-  
+
+//receive
+uint8_t receiveIp[]  = { 192, 168, 12, 210 };
+int receivePort      = 5678;
+
+//destination.
+uint8_t destIp[] = { 192, 168, 12, 51};
+int destPort     = 10000;
+
+//send value propaty.
+char *topAddress = "/mbed";
+char *subAddress[3] = {"/test1","/test2","/test3"};
+char *requestTopStr[3] = {"mbed1","mbed2","mbed3"};
+char *requestSubStr[3] = {"test1","test2","test3"};
+
+//instance
 OSCMessage recMes;
 OSCMessage sendMes;
-  
-OSCClass osc;    
-//OSCClass osc(&recMes);  // instantiate OSC communication object, and set the receiver container from the OSC packets  
- 
- Serial pc(USBTX, USBRX); 
- 
-void processOSC(UDPSocketEvent e); 
- 
-int main() {
-    
-  // make debug port:
-  pc.baud(115200);
+OSCClass osc;
+//OSCClass osc(&recMes);  // instantiate OSC communication object, and set the receiver container from the OSC packets
+Serial pc(USBTX, USBRX);
+
+//LED
+DigitalOut led(LED1);
+
+void processOSC(UDPSocketEvent e);
+
+int main()
+{
+
+    // make debug port:
+    pc.baud(BAUD_RATE);
 
-  // Set the Ethernet port: 
-  printf("Setting up...\r\n");
-  EthernetErr ethErr = eth.setup();
-  if(ethErr)
-  {
-    printf("Error %d in setup.\r\n", ethErr);
-    return -1;
-  }
-  printf("Setup OK\r\n");
-    
-  
-   //(1) Sending message:
-   // Set IP and Port: 
-   sendMes.setIp( destIp );
-   sendMes.setPort( destPort );
-   // Set data: 
-   // sendMes.setTopAddress(topAddress);
-   
-   //setting osc functionnality:
-   //(2) Receiving: 
-  // recMes.setIp( serverIp ); // not needed?
-   osc.setReceiveMessage(&recMes); // this sets the receiver container for the OSC packets (we can avoid doing this if we use osc.getMessage() to get messages)
-   osc.begin(serverPort, &processOSC); // binds the upd (osc) messages to an arbitrary listening port ("server" port), and callback function
-   
-   //==========================================   INFINITE LOOP (in USER PROGRAM CONTEXT) ===================================================================
+    // Set the Ethernet port:
+//    printf("Setting up...\r\n");
+    EthernetErr ethErr = eth.setup();
+    if(ethErr) {
+//        printf("Error %d in setup.\r\n", ethErr);
+        return -1;
+    }
+//    printf("Setup OK\r\n");
+
+
+    //(1) Sending message >>>>>
+    // Set IP and Port:
+    sendMes.setIp( destIp );
+    sendMes.setPort( destPort );
+
+    //(2) Receiving <<<<<
+    recMes.setIp(receiveIp);
+    osc.setReceiveMessage(&recMes); // this sets the receiver container for the OSC packets (we can avoid doing this if we use osc.getMessage() to get messages)
+    osc.begin(receivePort, &processOSC); // binds the upd (osc) messages to an arbitrary listening port ("server" port), and callback function
+
+    //loop
     while(true) {
         Net::poll();
-        
-        // ... Do whatever needs to be done (note: the osc processing is done in the processOSC function. 
-        // BUT DO NOT FORGET to call osc.onUDPSocketEvent(e). This is messy... should find a better way to do it. 
-    
+
+        //Set data
+        sendMes.setTopAddress(topAddress);//top address
+        sendMes.setSubAddress(subAddress[0]);//sub address
+        sendMes.setArgs("i", 1);//type , value
+
+        osc.sendOsc(&sendMes);//send!
     }
 }
 
 
-// This is the callback function called when there are packets on the listening socket. It is not nice to have it 
-// here, but for the time being having a "wrapping global" is the simplest solution (we cannot pass a member-function pointer 
-// as handler to the upd object).  
-void processOSC(UDPSocketEvent e) {
+//osc callback function
+void processOSC(UDPSocketEvent e)
+{
     osc.onUDPSocketEvent(e);
 
-    if (osc.newMessage) { // in fact, there is no need to check this if using the method of a global callback function - it is clear this is a new packet... however, it may be 
-                          // interesting to use a timer, and process data (answers, etc) only after a certain amount of time, so as to avoid blocking the program in IRQ context...
-        
-             //pc.printf("we received top address %s\n", recMes.getAddress(0) );
-             
-            osc.newMessage=false; // note: if using: message=osc.getMessage(), then we don't need to do this explicitly. 
-        
-            // Test: 
-            if( !strcmp( recMes.getAddress(0) , "mbed" ) ) {
-                pc.printf("we received topAddress= mbed \n");
-                if( !strcmp( recMes.getAddress(1) , "test1" ) )
-                      pc.printf("we received subAddress= test1 \n");
-                      
-                      // Send some osc message:
-                      sendMes.setTopAddress("/working...");
-                      osc.sendOsc(&sendMes);
-            }
-        }
-       
-}
+    if (osc.newMessage) {
+        //pc.printf("we received top address %s\n", recMes.getAddress(0) );
 
-
-/* EXAMPLE SEND/RECEIVE on PROCESSING:
-
-// oscP5sendreceive by andreas schlegel
-// example shows how to send and receive osc messages.
-// oscP5 website at http://www.sojamo.de/oscP5
-
- 
-import oscP5.*;
-import netP5.*;
-  
-OscP5 oscP5;
-NetAddress myRemoteLocation;
+        osc.newMessage = false; // note: if using: message = osc.getMessage(), then we don't need to do this explicitly.
 
-void setup() {
-  size(400,400);
-  frameRate(25);
-  // start oscP5, listening for incoming messages at port 12000 
-  oscP5 = new OscP5(this,12000);
-  
-  // myRemoteLocation is a NetAddress. a NetAddress takes 2 parameters,
-  // an ip address and a port number. myRemoteLocation is used as parameter in
-  // oscP5.send() when sending osc packets to another computer, device, 
-  // application. usage see below. for testing purposes the listening port
-  // and the port of the remote location address are the same, hence you will
-  // send messages back to this sketch.
-  myRemoteLocation = new NetAddress("10.0.0.2",10000);
-}
-
-
-void draw() {
-  background(0);  
-}
+        //(strcmp(str1,str2)==0)
+        //if ... str1 = str2 >>> same
+        if(strcmp(recMes.getAddress(0),requestTopStr[0])==0) {
+            if(strcmp(recMes.getAddress(1),requestSubStr[0])==0) {
+                led = 1;//led HIGH
+                wait(0.2);
+                led = 0;//led LOW
+                wait(0.2);
+                led = 1;//led HIGH
+                wait(0.2);
+                led = 0;//led LOW
+                wait(0.2);
+                led = 1;//led HIGH
+                wait(0.2);
+                led = 0;//led LOW
+                wait(0.2);
+            }
+        } else {
+            //action
+            led = 0;//led LOW
+        }
 
-void mousePressed() {
-  // in the following different ways of creating osc messages are shown by example 
-  OscMessage myMessage = new OscMessage("/mbed/test1");
-  
-  myMessage.add(123); // add an int to the osc message 
-
-  // send the message 
-  oscP5.send(myMessage, myRemoteLocation); 
-}
-
-
-// incoming osc message are forwarded to the oscEvent method. 
-void oscEvent(OscMessage theOscMessage) {
-  // print the address pattern and the typetag of the received OscMessage 
-  print("### received an osc message.");
-  print(" addrpattern: "+theOscMessage.addrPattern());
-  println(" typetag: "+theOscMessage.typetag());
-}
-
-*/
+        // Test:
+//        if( !strcmp( recMes.getAddress(0) , "mbed" ) )
+//        {
+//            pc.printf("we received topAddress= mbed \n");
+//
+//            if( !strcmp( recMes.getAddress(1) , "test1" ) )
+//            {
+//                pc.printf("we received subAddress= test1 \n");
+//
+//                // Send some osc message:
+//                sendMes.setTopAddress("/working...");
+//                osc.sendOsc(&sendMes);
+//            }
+//        }
+    }
+}
\ No newline at end of file