helpfor studient
Dependents: STM32_F103-C8T6basecanblink_led
Fork of mbed-dev by
Diff: targets/TARGET_NUVOTON/TARGET_M480/lp_ticker.c
- Revision:
- 183:a56a73fd2a6f
- Parent:
- 180:b0033dcd6934
- Child:
- 185:08ed48f1de7f
diff -r 57724642e740 -r a56a73fd2a6f targets/TARGET_NUVOTON/TARGET_M480/lp_ticker.c --- a/targets/TARGET_NUVOTON/TARGET_M480/lp_ticker.c Fri Feb 16 16:09:33 2018 +0000 +++ b/targets/TARGET_NUVOTON/TARGET_M480/lp_ticker.c Tue Mar 20 16:56:18 2018 +0000 @@ -19,200 +19,141 @@ #if DEVICE_LOWPOWERTIMER #include "sleep_api.h" +#include "mbed_wait_api.h" +#include "mbed_assert.h" #include "nu_modutil.h" #include "nu_miscutil.h" -#include "mbed_critical.h" - -// lp_ticker tick = us = timestamp -#define US_PER_TICK (1) -#define US_PER_SEC (1000 * 1000) - -#define US_PER_TMR2_INT (US_PER_SEC * 10) -#define TMR2_CLK_PER_SEC (__LXT) -#define TMR2_CLK_PER_TMR2_INT ((uint32_t) ((uint64_t) US_PER_TMR2_INT * TMR2_CLK_PER_SEC / US_PER_SEC)) -#define TMR3_CLK_PER_SEC (__LXT) -static void tmr2_vec(void); -static void tmr3_vec(void); -static void lp_ticker_arm_cd(void); +/* Micro seconds per second */ +#define NU_US_PER_SEC 1000000 +/* Timer clock per lp_ticker tick */ +#define NU_TMRCLK_PER_TICK 1 +/* Timer clock per second */ +#define NU_TMRCLK_PER_SEC (__LXT) +/* Timer max counter bit size */ +#define NU_TMR_MAXCNT_BITSIZE 24 +/* Timer max counter */ +#define NU_TMR_MAXCNT ((1 << NU_TMR_MAXCNT_BITSIZE) - 1) -static int lp_ticker_inited = 0; -static volatile uint32_t counter_major = 0; -static volatile uint32_t cd_major_minor_clks = 0; -static volatile uint32_t cd_minor_clks = 0; -static volatile uint32_t wakeup_tick = (uint32_t) -1; +static void tmr1_vec(void); -// NOTE: To wake the system from power down mode, timer clock source must be ether LXT or LIRC. -// NOTE: TIMER_2 for normal counting and TIMER_3 for scheduled wakeup -static const struct nu_modinit_s timer2_modinit = {TIMER_2, TMR2_MODULE, CLK_CLKSEL1_TMR2SEL_LXT, 0, TMR2_RST, TMR2_IRQn, (void *) tmr2_vec}; -static const struct nu_modinit_s timer3_modinit = {TIMER_3, TMR3_MODULE, CLK_CLKSEL1_TMR3SEL_LXT, 0, TMR3_RST, TMR3_IRQn, (void *) tmr3_vec}; +/* NOTE: To wake the system from power down mode, timer clock source must be ether LXT or LIRC. */ +static const struct nu_modinit_s timer1_modinit = {TIMER_1, TMR1_MODULE, CLK_CLKSEL1_TMR1SEL_LXT, 0, TMR1_RST, TMR1_IRQn, (void *) tmr1_vec}; + +#define TIMER_MODINIT timer1_modinit + +static int ticker_inited = 0; #define TMR_CMP_MIN 2 #define TMR_CMP_MAX 0xFFFFFFu void lp_ticker_init(void) { - if (lp_ticker_inited) { + if (ticker_inited) { return; } - lp_ticker_inited = 1; - - counter_major = 0; - cd_major_minor_clks = 0; - cd_minor_clks = 0; - wakeup_tick = (uint32_t) -1; + ticker_inited = 1; // Reset module - SYS_ResetModule(timer2_modinit.rsetidx); - SYS_ResetModule(timer3_modinit.rsetidx); + SYS_ResetModule(TIMER_MODINIT.rsetidx); // Select IP clock source - CLK_SetModuleClock(timer2_modinit.clkidx, timer2_modinit.clksrc, timer2_modinit.clkdiv); - CLK_SetModuleClock(timer3_modinit.clkidx, timer3_modinit.clksrc, timer3_modinit.clkdiv); + CLK_SetModuleClock(TIMER_MODINIT.clkidx, TIMER_MODINIT.clksrc, TIMER_MODINIT.clkdiv); + // Enable IP clock - CLK_EnableModuleClock(timer2_modinit.clkidx); - CLK_EnableModuleClock(timer3_modinit.clkidx); + CLK_EnableModuleClock(TIMER_MODINIT.clkidx); // Configure clock - uint32_t clk_timer2 = TIMER_GetModuleClock((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); - uint32_t prescale_timer2 = clk_timer2 / TMR2_CLK_PER_SEC - 1; - MBED_ASSERT((prescale_timer2 != (uint32_t) -1) && prescale_timer2 <= 127); - MBED_ASSERT((clk_timer2 % TMR2_CLK_PER_SEC) == 0); - uint32_t cmp_timer2 = TMR2_CLK_PER_TMR2_INT; - MBED_ASSERT(cmp_timer2 >= TMR_CMP_MIN && cmp_timer2 <= TMR_CMP_MAX); + uint32_t clk_timer = TIMER_GetModuleClock((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); + uint32_t prescale_timer = clk_timer / NU_TMRCLK_PER_SEC - 1; + MBED_ASSERT((prescale_timer != (uint32_t) -1) && prescale_timer <= 127); + MBED_ASSERT((clk_timer % NU_TMRCLK_PER_SEC) == 0); + uint32_t cmp_timer = TMR_CMP_MAX; + MBED_ASSERT(cmp_timer >= TMR_CMP_MIN && cmp_timer <= TMR_CMP_MAX); // Continuous mode // NOTE: TIMER_CTL_CNTDATEN_Msk exists in NUC472, but not in M451/M480. In M451/M480, TIMER_CNT is updated continuously by default. - ((TIMER_T *) NU_MODBASE(timer2_modinit.modname))->CTL = TIMER_PERIODIC_MODE | prescale_timer2/* | TIMER_CTL_CNTDATEN_Msk*/; - ((TIMER_T *) NU_MODBASE(timer2_modinit.modname))->CMP = cmp_timer2; + ((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname))->CTL = TIMER_CONTINUOUS_MODE | prescale_timer/* | TIMER_CTL_CNTDATEN_Msk*/; + ((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname))->CMP = cmp_timer; // Set vector - NVIC_SetVector(timer2_modinit.irq_n, (uint32_t) timer2_modinit.var); - NVIC_SetVector(timer3_modinit.irq_n, (uint32_t) timer3_modinit.var); + NVIC_SetVector(TIMER_MODINIT.irq_n, (uint32_t) TIMER_MODINIT.var); - NVIC_EnableIRQ(timer2_modinit.irq_n); - NVIC_EnableIRQ(timer3_modinit.irq_n); - - TIMER_EnableInt((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); - TIMER_EnableWakeup((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); + NVIC_EnableIRQ(TIMER_MODINIT.irq_n); - // NOTE: TIMER_Start() first and then lp_ticker_set_interrupt(); otherwise, we may get stuck in lp_ticker_read() because - // timer is not running. - - // Start timer - TIMER_Start((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); - - // Schedule wakeup to match semantics of lp_ticker_get_compare_match() - lp_ticker_set_interrupt(wakeup_tick); + TIMER_EnableInt((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); + TIMER_EnableWakeup((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); + /* NOTE: When engine is clocked by low power clock source (LXT/LIRC), we need to wait for 3 engine clocks. */ + wait_us((NU_US_PER_SEC / NU_TMRCLK_PER_SEC) * 3); + TIMER_Start((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); } timestamp_t lp_ticker_read() { - if (! lp_ticker_inited) { + if (! ticker_inited) { lp_ticker_init(); } - TIMER_T * timer2_base = (TIMER_T *) NU_MODBASE(timer2_modinit.modname); - - do { - uint64_t major_minor_clks; - uint32_t minor_clks; - - // NOTE: As TIMER_CNT = TIMER_CMP and counter_major has increased by one, TIMER_CNT doesn't change to 0 for one tick time. - // NOTE: As TIMER_CNT = TIMER_CMP or TIMER_CNT = 0, counter_major (ISR) may not sync with TIMER_CNT. So skip and fetch stable one at the cost of 1 clock delay on this read. - do { - core_util_critical_section_enter(); + TIMER_T * timer_base = (TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname); - // NOTE: Order of reading minor_us/carry here is significant. - minor_clks = TIMER_GetCounter(timer2_base); - uint32_t carry = (timer2_base->INTSTS & TIMER_INTSTS_TIF_Msk) ? 1 : 0; - // When TIMER_CNT approaches TIMER_CMP and will wrap soon, we may get carry but TIMER_CNT not wrapped. Handle carefully carry == 1 && TIMER_CNT is near TIMER_CMP. - if (carry && minor_clks > (TMR2_CLK_PER_TMR2_INT / 2)) { - major_minor_clks = (counter_major + 1) * TMR2_CLK_PER_TMR2_INT; - } else { - major_minor_clks = (counter_major + carry) * TMR2_CLK_PER_TMR2_INT + minor_clks; - } - - core_util_critical_section_exit(); - } while (minor_clks == 0 || minor_clks == TMR2_CLK_PER_TMR2_INT); - - // Add power-down compensation - return ((uint64_t) major_minor_clks * US_PER_SEC / TMR2_CLK_PER_SEC / US_PER_TICK); - } while (0); + return (TIMER_GetCounter(timer_base) / NU_TMRCLK_PER_TICK); } void lp_ticker_set_interrupt(timestamp_t timestamp) { - uint32_t delta = timestamp - lp_ticker_read(); - wakeup_tick = timestamp; + /* In continuous mode, counter will be reset to zero with the following sequence: + * 1. Stop counting + * 2. Configure new CMP value + * 3. Restart counting + * + * This behavior is not what we want. To fix it, we could configure new CMP value + * without stopping counting first. + */ + TIMER_T * timer_base = (TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname); - TIMER_Stop((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); + /* NOTE: Because H/W timer requests min compare value, our implementation would have alarm delay of + * (TMR_CMP_MIN - interval_clk) clocks when interval_clk is between [1, TMR_CMP_MIN). */ + uint32_t cmp_timer = timestamp * NU_TMRCLK_PER_TICK; + cmp_timer = NU_CLAMP(cmp_timer, TMR_CMP_MIN, TMR_CMP_MAX); + timer_base->CMP = cmp_timer; - cd_major_minor_clks = (uint64_t) delta * US_PER_TICK * TMR3_CLK_PER_SEC / US_PER_SEC; - lp_ticker_arm_cd(); + /* NOTE: When engine is clocked by low power clock source (LXT/LIRC), we need to wait for 3 engine clocks. */ + wait_us((NU_US_PER_SEC / NU_TMRCLK_PER_SEC) * 3); + TIMER_Start(timer_base); +} + +void lp_ticker_disable_interrupt(void) +{ + TIMER_DisableInt((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); +} + +void lp_ticker_clear_interrupt(void) +{ + TIMER_ClearIntFlag((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); } void lp_ticker_fire_interrupt(void) { // NOTE: This event was in the past. Set the interrupt as pending, but don't process it here. // This prevents a recursive loop under heavy load which can lead to a stack overflow. - cd_major_minor_clks = cd_minor_clks = 0; - NVIC_SetPendingIRQ(timer3_modinit.irq_n); -} - -void lp_ticker_disable_interrupt(void) -{ - TIMER_DisableInt((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); -} - -void lp_ticker_clear_interrupt(void) -{ - TIMER_ClearIntFlag((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); -} - -static void tmr2_vec(void) -{ - TIMER_ClearIntFlag((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); - TIMER_ClearWakeupFlag((TIMER_T *) NU_MODBASE(timer2_modinit.modname)); - counter_major ++; + NVIC_SetPendingIRQ(TIMER_MODINIT.irq_n); } -static void tmr3_vec(void) +const ticker_info_t* lp_ticker_get_info() { - TIMER_ClearIntFlag((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); - TIMER_ClearWakeupFlag((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); - cd_major_minor_clks = (cd_major_minor_clks > cd_minor_clks) ? (cd_major_minor_clks - cd_minor_clks) : 0; - if (cd_major_minor_clks == 0) { - // NOTE: lp_ticker_set_interrupt() may get called in lp_ticker_irq_handler(); - lp_ticker_irq_handler(); - } else { - lp_ticker_arm_cd(); - } + static const ticker_info_t info = { + NU_TMRCLK_PER_SEC / NU_TMRCLK_PER_TICK, + NU_TMR_MAXCNT_BITSIZE + }; + return &info; } -static void lp_ticker_arm_cd(void) +static void tmr1_vec(void) { - TIMER_T * timer3_base = (TIMER_T *) NU_MODBASE(timer3_modinit.modname); + TIMER_ClearIntFlag((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); + TIMER_ClearWakeupFlag((TIMER_T *) NU_MODBASE(TIMER_MODINIT.modname)); + + // NOTE: lp_ticker_set_interrupt() may get called in lp_ticker_irq_handler(); + lp_ticker_irq_handler(); +} - // Reset 8-bit PSC counter, 24-bit up counter value and CNTEN bit - // NUC472/M451: See TIMER_CTL_RSTCNT_Msk - // M480 - timer3_base->CNT = 0; - while (timer3_base->CNT & TIMER_CNT_RSTACT_Msk); - // One-shot mode, Clock = 1 KHz - uint32_t clk_timer3 = TIMER_GetModuleClock((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); - uint32_t prescale_timer3 = clk_timer3 / TMR3_CLK_PER_SEC - 1; - MBED_ASSERT((prescale_timer3 != (uint32_t) -1) && prescale_timer3 <= 127); - MBED_ASSERT((clk_timer3 % TMR3_CLK_PER_SEC) == 0); - // NOTE: TIMER_CTL_CNTDATEN_Msk exists in NUC472, but not in M451/M480. In M451/M480, TIMER_CNT is updated continuously by default. - timer3_base->CTL &= ~(TIMER_CTL_OPMODE_Msk | TIMER_CTL_PSC_Msk/* | TIMER_CTL_CNTDATEN_Msk*/); - timer3_base->CTL |= TIMER_ONESHOT_MODE | prescale_timer3/* | TIMER_CTL_CNTDATEN_Msk*/; - - cd_minor_clks = cd_major_minor_clks; - cd_minor_clks = NU_CLAMP(cd_minor_clks, TMR_CMP_MIN, TMR_CMP_MAX); - timer3_base->CMP = cd_minor_clks; - - TIMER_EnableInt(timer3_base); - TIMER_EnableWakeup((TIMER_T *) NU_MODBASE(timer3_modinit.modname)); - TIMER_Start(timer3_base); -} #endif