File content as of revision 2:ffc5216bd2cc:

#include "nrf51822.h"
#include "mbed.h"

/**************************************************************************/
/*!
    @brief  UART callback function
*/
/**************************************************************************/
void nRF51822::uartCallback(void)
{
    /* ToDo: Check responses and set a flag for success/error/etc. */
    
    /* Read serial to clear the RX interrupt */
    uart.getc();
}

/**************************************************************************/
/*!
    @brief  Constructor
*/
/**************************************************************************/
//nRF51822::nRF51822() : uart(P0_4, P0_0) /* LPC812 */
nRF51822::nRF51822() : uart(p9, p10)      /* LPC1768 using apps board */
{
    /* Setup the nRF UART interface */
    uart.baud(9600);

    /* Echo data on the debug CDC port */
    uart.attach(this, &nRF51822::uartCallback);
    
    /* Add flow control for UART (required by the nRF51822) */
    //uart.set_flow_control(Serial::RTSCTS, P0_6, P0_8);  /* LPC812 */
    uart.set_flow_control(Serial::RTSCTS, p30, p29);      /* LPC1768 */

    /* Reset the service counter */
    serviceCount = 0;
}

/**************************************************************************/
/*!
    @brief  Destructor
*/
/**************************************************************************/
nRF51822::~nRF51822(void)
{
}

/**************************************************************************/
/*!

*/
/**************************************************************************/
void nRF51822::test(void)
{
    /* Send iBeacon data as a test */
    uint8_t response[4];
    uart.printf("10 0a 00 1e 02 01 04 1A FF 4C 00 02 15 E2 0A 39 F4 73 F5 4B C4 A1 2F 17 D1 AD 07 A9 61 00 00 00 00 C8\r\n");
    response[0] = uart.getc();
    response[1] = uart.getc();
    response[2] = uart.getc();
    response[3] = uart.getc();
    wait(0.1);
    /* Start the radio */
    uart.printf("10 03 00 00\r\n");
    response[0] = uart.getc();
    response[1] = uart.getc();
    response[2] = uart.getc();
    response[3] = uart.getc();
}

/**************************************************************************/
/*!

*/
/**************************************************************************/
ble_error_t nRF51822::setAdvertising(GapAdvertisingParams &, GapAdvertisingData &)
{
    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!

*/
/**************************************************************************/
ble_error_t nRF51822::addService(GattService & service)
{
    /* ToDo: Make sure we don't overflow the array, etc. */
    /* ToDo: Make sure this service UUID doesn't already exist (?) */
    /* ToDo: Basic validation */
    
    /* Add the service to the nRF51 */
    if (service.primaryServiceID.type == UUID::UUID_TYPE_SHORT)
    {
        /* 16-bit BLE UUID */
        uart.printf("10 01 00 04 01 02 %02X %02X\r\n",
                    service.primaryServiceID.value & 0xFF,
                    service.primaryServiceID.value >> 8);
    }
    else
    {
        /* 128-bit Custom UUID */
        uart.printf("10 01 00 12 01 10 %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X %02X\r\n",
            service.primaryServiceID.base[0], 
            service.primaryServiceID.base[1], 
            service.primaryServiceID.base[2], 
            service.primaryServiceID.base[3], 
            service.primaryServiceID.base[4], 
            service.primaryServiceID.base[5], 
            service.primaryServiceID.base[6], 
            service.primaryServiceID.base[7], 
            service.primaryServiceID.base[8], 
            service.primaryServiceID.base[9], 
            service.primaryServiceID.base[10], 
            service.primaryServiceID.base[11], 
            service.primaryServiceID.base[12], 
            service.primaryServiceID.base[13], 
            service.primaryServiceID.base[14], 
            service.primaryServiceID.base[15]);
    }
    
    /* ToDo: Check response */
    wait(0.1);
    
    /* Add characteristics to the service */
    for (uint8_t i = 0; i < service.characteristicCount; i++)
    {
        /* Command ID = 0x0002 */
        uart.printf("10 02 00 0F 01 02 %02X %02X 04 02 %02X %02X 05 02 %02X %02X 03 01 %02X\r\n",
                    service.characteristics[i].id & 0xFF, 
                    service.characteristics[i].id >> 8,
                    service.characteristics[i].lenMin & 0xFF,
                    service.characteristics[i].lenMin >> 8,
                    service.characteristics[i].lenMax & 0xFF,
                    service.characteristics[i].lenMax >> 8,
                    service.characteristics[i].properties);
                    
        /* ToDo: Check response */
        wait(0.1);
    }    

    /* Update the service index value */
    service.index = serviceCount;
    serviceCount++;
    
    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Reads the value of a characteristic, based on the service
            and characteristic index fields

    @param[in]  service
                The GattService to read from
    @param[in]  characteristic
                The GattCharacteristic to read from
    @param[in]  buffer
                Buffer to hold the the characteristic's value
                (raw byte array in LSB format)
    @param[in]  len
                The number of bytes read into the buffer
*/
/**************************************************************************/
ble_error_t nRF51822::readCharacteristic(GattService &service, GattCharacteristic &characteristic, uint8_t buffer[], uint16_t len)
{
    /* ToDo */
    
    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Updates the value of a characteristic, based on the service
            and characteristic index fields
            
    @param[in]  service
                The GattService to write to
    @param[in]  characteristic
                The GattCharacteristic to write to
    @param[in]  buffer
                Data to use when updating the characteristic's value
                (raw byte array in LSB format)
    @param[in]  len
                The number of bytes in buffer
*/
/**************************************************************************/
ble_error_t nRF51822::writeCharacteristic(GattService &service, GattCharacteristic &characteristic, uint8_t buffer[], uint16_t len)
{
    /* Command ID = 0x0006, Payload = Service ID, Characteristic ID, Value */
    uart.printf("10 06 00 %02X %02X %02X", len + 2, characteristic.index, service.index);
    for (uint16_t i = 0; i<len; i++)
    {
        uart.printf(" %02X", buffer[i]);
    }
    uart.printf("\r\n");

    /* ToDo: Check response */
    wait(0.1);
    
    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Starts the BLE HW, initialising any services that were
            added before this function was called.
            
    @note   All services must be added before calling this function!
*/
/**************************************************************************/
ble_error_t nRF51822::start(void)
{
    /* Command ID = 0x0003, No payload */
    uart.printf("10 03 00 00\r\n");

    /* ToDo: Check response */
    wait(0.5);

    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Stops the BLE HW and disconnects from any devices
*/
/**************************************************************************/
ble_error_t nRF51822::stop(void)
{
    /* Command ID = 0x0004, No payload */
    uart.printf("10 04 00 00\r\n");

    /* ToDo: Check response */
    wait(0.1);

    return BLE_ERROR_NONE;
}

/**************************************************************************/
/*!
    @brief  Resets the BLE HW, removing any existing services and
            characteristics
*/
/**************************************************************************/
ble_error_t nRF51822::reset(void)
{
    /* Command ID = 0x0005, No payload */
    uart.printf("10 05 00 00\r\n");

    /* Reset the service counter */
    serviceCount = 0;

    /* Wait for the radio to come back up */    
    wait(1);
    
    return BLE_ERROR_NONE;
}