Diff: USBHost/USBHALHost_LPC17.cpp

Revision:

43:78f328f311dc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHost/USBHALHost_LPC17.cpp	Thu Jul 26 00:19:16 2018 +0000
@@ -0,0 +1,325 @@
+/* mbed USBHost Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#if defined(TARGET_LPC1768) || defined(TARGET_LPC2460)
+
+#include "mbed.h"
+#include "USBHALHost.h"
+#include "dbg.h"
+
+// bits of the USB/OTG clock control register
+#define HOST_CLK_EN     (1<<0)
+#define DEV_CLK_EN      (1<<1)
+#define PORTSEL_CLK_EN  (1<<3)
+#define AHB_CLK_EN      (1<<4)
+
+// bits of the USB/OTG clock status register
+#define HOST_CLK_ON     (1<<0)
+#define DEV_CLK_ON      (1<<1)
+#define PORTSEL_CLK_ON  (1<<3)
+#define AHB_CLK_ON      (1<<4)
+
+// we need host clock, OTG/portsel clock and AHB clock
+#define CLOCK_MASK (HOST_CLK_EN | PORTSEL_CLK_EN | AHB_CLK_EN)
+
+#define HCCA_SIZE sizeof(HCCA)
+#define ED_SIZE sizeof(HCED)
+#define TD_SIZE sizeof(HCTD)
+
+#define TOTAL_SIZE (HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE) + (MAX_TD*TD_SIZE))
+
+static volatile uint8_t usb_buf[TOTAL_SIZE] __attribute((section("AHBSRAM1"),aligned(256)));  //256 bytes aligned!
+
+USBHALHost * USBHALHost::instHost;
+
+USBHALHost::USBHALHost() {
+    instHost = this;
+    memInit();
+    memset((void*)usb_hcca, 0, HCCA_SIZE);
+    for (int i = 0; i < MAX_ENDPOINT; i++) {
+        edBufAlloc[i] = false;
+    }
+    for (int i = 0; i < MAX_TD; i++) {
+        tdBufAlloc[i] = false;
+    }
+}
+
+void USBHALHost::init() {
+    NVIC_DisableIRQ(USB_IRQn);
+
+    //Cut power
+    LPC_SC->PCONP &= ~(1UL<<31);
+    wait_ms(100);
+
+    // turn on power for USB
+    LPC_SC->PCONP       |= (1UL<<31);
+
+    // Enable USB host clock, port selection and AHB clock
+    LPC_USB->USBClkCtrl |= CLOCK_MASK;
+
+    // Wait for clocks to become available
+    while ((LPC_USB->USBClkSt & CLOCK_MASK) != CLOCK_MASK);
+
+    // it seems the bits[0:1] mean the following
+    // 0: U1=device, U2=host
+    // 1: U1=host, U2=host
+    // 2: reserved
+    // 3: U1=host, U2=device
+    // NB: this register is only available if OTG clock (aka "port select") is enabled!!
+    // since we don't care about port 2, set just bit 0 to 1 (U1=host)
+    LPC_USB->OTGStCtrl |= 1;
+
+    // now that we've configured the ports, we can turn off the portsel clock
+    LPC_USB->USBClkCtrl &= ~PORTSEL_CLK_EN;
+
+    // configure USB D+/D- pins
+    // P0[29] = USB_D+, 01
+    // P0[30] = USB_D-, 01
+    LPC_PINCON->PINSEL1 &= ~((3<<26) | (3<<28));
+    LPC_PINCON->PINSEL1 |=  ((1<<26) | (1<<28));
+
+    LPC_USB->HcControl       = 0; // HARDWARE RESET
+    LPC_USB->HcControlHeadED = 0; // Initialize Control list head to Zero
+    LPC_USB->HcBulkHeadED    = 0; // Initialize Bulk list head to Zero
+
+    // Wait 100 ms before apply reset
+    wait_ms(100);
+
+    // software reset
+    LPC_USB->HcCommandStatus = OR_CMD_STATUS_HCR;
+
+    // Write Fm Interval and Largest Data Packet Counter
+    LPC_USB->HcFmInterval    = DEFAULT_FMINTERVAL;
+    LPC_USB->HcPeriodicStart = FI * 90 / 100;
+
+    // Put HC in operational state
+    LPC_USB->HcControl  = (LPC_USB->HcControl & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER;
+    // Set Global Power
+    LPC_USB->HcRhStatus = OR_RH_STATUS_LPSC;
+
+    LPC_USB->HcHCCA = (uint32_t)(usb_hcca);
+
+    // Clear Interrrupt Status
+    LPC_USB->HcInterruptStatus |= LPC_USB->HcInterruptStatus;
+
+    LPC_USB->HcInterruptEnable  = OR_INTR_ENABLE_MIE | OR_INTR_ENABLE_WDH | OR_INTR_ENABLE_RHSC;
+
+    // Enable the USB Interrupt
+    NVIC_SetVector(USB_IRQn, (uint32_t)(_usbisr));
+    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_CSC;
+    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
+
+    NVIC_EnableIRQ(USB_IRQn);
+
+    // Check for any connected devices
+    if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CCS) {
+        //Device connected
+        wait_ms(150);
+        USB_DBG("Device connected (%08x)\n\r", LPC_USB->HcRhPortStatus1);
+        deviceConnected(0, 1, LPC_USB->HcRhPortStatus1 & OR_RH_PORT_LSDA);
+    }
+}
+
+uint32_t USBHALHost::controlHeadED() {
+    return LPC_USB->HcControlHeadED;
+}
+
+uint32_t USBHALHost::bulkHeadED() {
+    return LPC_USB->HcBulkHeadED;
+}
+
+uint32_t USBHALHost::interruptHeadED() {
+    return usb_hcca->IntTable[0];
+}
+
+void USBHALHost::updateBulkHeadED(uint32_t addr) {
+    LPC_USB->HcBulkHeadED = addr;
+}
+
+
+void USBHALHost::updateControlHeadED(uint32_t addr) {
+    LPC_USB->HcControlHeadED = addr;
+}
+
+void USBHALHost::updateInterruptHeadED(uint32_t addr) {
+    usb_hcca->IntTable[0] = addr;
+}
+
+
+void USBHALHost::enableList(ENDPOINT_TYPE type) {
+    switch(type) {
+        case CONTROL_ENDPOINT:
+            LPC_USB->HcCommandStatus = OR_CMD_STATUS_CLF;
+            LPC_USB->HcControl |= OR_CONTROL_CLE;
+            break;
+        case ISOCHRONOUS_ENDPOINT:
+            break;
+        case BULK_ENDPOINT:
+            LPC_USB->HcCommandStatus = OR_CMD_STATUS_BLF;
+            LPC_USB->HcControl |= OR_CONTROL_BLE;
+            break;
+        case INTERRUPT_ENDPOINT:
+            LPC_USB->HcControl |= OR_CONTROL_PLE;
+            break;
+    }
+}
+
+
+bool USBHALHost::disableList(ENDPOINT_TYPE type) {
+    switch(type) {
+        case CONTROL_ENDPOINT:
+            if(LPC_USB->HcControl & OR_CONTROL_CLE) {
+                LPC_USB->HcControl &= ~OR_CONTROL_CLE;
+                return true;
+            }
+            return false;
+        case ISOCHRONOUS_ENDPOINT:
+            return false;
+        case BULK_ENDPOINT:
+            if(LPC_USB->HcControl & OR_CONTROL_BLE){
+                LPC_USB->HcControl &= ~OR_CONTROL_BLE;
+                return true;
+            }
+            return false;
+        case INTERRUPT_ENDPOINT:
+            if(LPC_USB->HcControl & OR_CONTROL_PLE) {
+                LPC_USB->HcControl &= ~OR_CONTROL_PLE;
+                return true;
+            }
+            return false;
+    }
+    return false;
+}
+
+
+void USBHALHost::memInit() {
+    usb_hcca = (volatile HCCA *)usb_buf;
+    usb_edBuf = usb_buf + HCCA_SIZE;
+    usb_tdBuf = usb_buf + HCCA_SIZE + (MAX_ENDPOINT*ED_SIZE);
+}
+
+volatile uint8_t * USBHALHost::getED() {
+    for (int i = 0; i < MAX_ENDPOINT; i++) {
+        if ( !edBufAlloc[i] ) {
+            edBufAlloc[i] = true;
+            return (volatile uint8_t *)(usb_edBuf + i*ED_SIZE);
+        }
+    }
+    perror("Could not allocate ED\r\n");
+    return NULL; //Could not alloc ED
+}
+
+volatile uint8_t * USBHALHost::getTD() {
+    int i;
+    for (i = 0; i < MAX_TD; i++) {
+        if ( !tdBufAlloc[i] ) {
+            tdBufAlloc[i] = true;
+            return (volatile uint8_t *)(usb_tdBuf + i*TD_SIZE);
+        }
+    }
+    perror("Could not allocate TD\r\n");
+    return NULL; //Could not alloc TD
+}
+
+
+void USBHALHost::freeED(volatile uint8_t * ed) {
+    int i;
+    i = (ed - usb_edBuf) / ED_SIZE;
+    edBufAlloc[i] = false;
+}
+
+void USBHALHost::freeTD(volatile uint8_t * td) {
+    int i;
+    i = (td - usb_tdBuf) / TD_SIZE;
+    tdBufAlloc[i] = false;
+}
+
+
+void USBHALHost::resetRootHub() {
+    // Initiate port reset
+    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRS;
+
+    while (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRS);
+
+    // ...and clear port reset signal
+    LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
+}
+
+
+void USBHALHost::_usbisr(void) {
+    if (instHost) {
+        instHost->UsbIrqhandler();
+    }
+}
+
+void USBHALHost::UsbIrqhandler() {
+    if( LPC_USB->HcInterruptStatus & LPC_USB->HcInterruptEnable ) //Is there something to actually process?
+    {
+
+        uint32_t int_status = LPC_USB->HcInterruptStatus & LPC_USB->HcInterruptEnable;
+
+        // Root hub status change interrupt
+        if (int_status & OR_INTR_STATUS_RHSC) {
+            if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CSC) {
+                if (LPC_USB->HcRhStatus & OR_RH_STATUS_DRWE) {
+                    // When DRWE is on, Connect Status Change
+                    // means a remote wakeup event.
+                } else {
+
+                    //Root device connected
+                    if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CCS) {
+
+                        // wait 150ms to avoid bounce
+                        wait_ms(150);
+
+                        //Hub 0 (root hub), Port 1 (count starts at 1), Low or High speed
+                        deviceConnected(0, 1, LPC_USB->HcRhPortStatus1 & OR_RH_PORT_LSDA);
+                    }
+
+                    //Root device disconnected
+                    else {
+
+                        if (!(int_status & OR_INTR_STATUS_WDH)) {
+                            usb_hcca->DoneHead = 0;
+                        }
+
+                        // wait 200ms to avoid bounce
+                        wait_ms(200);
+
+                        deviceDisconnected(0, 1, NULL, usb_hcca->DoneHead & 0xFFFFFFFE);
+
+                        if (int_status & OR_INTR_STATUS_WDH) {
+                            usb_hcca->DoneHead = 0;
+                            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_WDH;
+                        }
+                    }
+                }
+                LPC_USB->HcRhPortStatus1 = OR_RH_PORT_CSC;
+            }
+            if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRSC) {
+                LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
+            }
+            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_RHSC;
+        }
+
+        // Writeback Done Head interrupt
+        if (int_status & OR_INTR_STATUS_WDH) {
+            transferCompleted(usb_hcca->DoneHead & 0xFFFFFFFE);
+            LPC_USB->HcInterruptStatus = OR_INTR_STATUS_WDH;
+        }
+    }
+}
+#endif