Diff: HK.cpp

Revision:

0:e9c32e1df869

Child:

1:bd715ccef1bb

diff -r 000000000000 -r e9c32e1df869 HK.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/HK.cpp	Wed Dec 17 06:52:26 2014 +0000
@@ -0,0 +1,226 @@
+#include "HK.h"
+ 
+ 
+//GPIO pins used=> D2-D12, A0-A1
+
+DigitalOut SelectLinesA[]={D2,D3,D4,D5};//to mux1=>voltage mux
+DigitalOut SelectLinesB[]={PTB18,PTB19,PTC10};//to mux2=>current mux(differential mux)
+DigitalOut SelectLinesC[]={PTC0,PTC4,PTC6,PTC7};//to mux3=>temp mux
+
+//--------------------------------------------MSB is SelectLines[0],LSB is SelectLines[3]-------------------------------- 
+
+AnalogIn CurrentInput(A0); // Input from Current Mux
+AnalogIn VoltageInput(A1); // Input from Voltage Multiplexer
+AnalogIn TemperatureInput(A2); /*Input from Temperature Multiplexer,thermistor Multiplexer- same multiplexer for both(lines 1-4 for thermistor,line 0 for temperature sensor)*/
+ 
+
+
+ 
+int quantiz(float start,float step,float x)     // accepts min and measured values and step->quantises on a scale 0-15..(4 bit quantisation)
+{
+    int y=(x-start)/step;
+    if(y<=0)y=0;
+    if(y>=15)y=15;
+    return y;
+}
+ 
+void init_beacon(ShortBeacy* x,SensorDataQuantised y)  
+{
+    (*x).Voltage[0]=2;//quantised value
+    (*x).Temp[0]=y.PanelTemperature[0];//quantised value
+    (*x).Temp[1]=y.PanelTemperature[1];//quantised value
+    (*x).AngularSpeed[0]=y.AngularSpeed[0];
+    (*x).AngularSpeed[1]=y.AngularSpeed[1];
+    
+    (*x).SubsystemStatus[0]=145;//dummy values----------to be changed-------------------
+    (*x).ErrorFlag[0]=3;//dummy values----------to be changed-------------------
+}
+
+SensorData Sensor; 
+SensorDataQuantised SensorQuantised;
+ShortBeacy Shortbeacon;
+void FUNC_HK_MAIN()             
+{
+    //define structure variables    
+ 
+    
+    
+    
+    //initialise all selectlines to zeroes->1st line of muxes selected
+    SelectLinesA[0]=SelectLinesA[1]=SelectLinesA[2]=SelectLinesA[3]=0;
+    SelectLinesB[0]=SelectLinesB[1]=SelectLinesB[2]=0;
+    SelectLinesC[0]=SelectLinesC[1]=SelectLinesC[2]=SelectLinesC[3]=0;
+    
+    int LoopIterator;
+    int SelectLineIterator;
+    
+    float resistance_thermistor,voltage_thermistor;//for thermistor
+ 
+  //measurement from voltage sensor=> 16 sensors in place
+ for(LoopIterator=0; LoopIterator<16; LoopIterator++) 
+{       
+        //following lines read the sensor values and stores them in 'SensorData' structure's variable 'Sensor'
+        Sensor.Voltage[LoopIterator]=(VoltageInput.read()*3.3*5.545454);//resistors in voltage divider=>15Mohm,3.3Mohm
+               
+        if(LoopIterator%2==0)
+            SensorQuantised.Voltage[LoopIterator/2]=quantiz(vstart,vstep,Sensor.Voltage[LoopIterator]);
+                           
+        else
+            SensorQuantised.Voltage[(LoopIterator)/2]=SensorQuantised.Voltage[(LoopIterator)/2]<<4+quantiz(vstart,vstep,Sensor.Voltage[LoopIterator]);
+            
+    
+    
+    // The following lines are used to iterate the select lines from 0 to 15
+    //following is an algorithm similar to counting binary numbers of 4 bit
+       for(SelectLineIterator=3;SelectLineIterator>=0;SelectLineIterator--)
+        {
+            if(SelectLinesA[SelectLineIterator]==0)
+            {
+                SelectLinesA[SelectLineIterator]=1;
+                break;
+            }
+            else SelectLinesA[SelectLineIterator]=0;
+    
+        }
+    
+    
+        wait_us(10.0); //  A delay of 10 microseconds between each sensor output. Can be changed.
+ 
+ }
+ 
+ 
+ 
+ 
+ 
+ //measurement from current sensor=>  8 sensors in place 
+
+    for(LoopIterator=0; LoopIterator<8; LoopIterator++) 
+{       
+        //following lines read the sensor values and stores them in 'SensorData' structure variable 'Sensor'
+        Sensor.Current[LoopIterator]=(CurrentInput.read()*3.3/(50*rsens));
+        if(LoopIterator%2==0)
+            SensorQuantised.Current[LoopIterator/2]=quantiz(cstart,cstep,Sensor.Current[LoopIterator]);
+        else
+            SensorQuantised.Current[(LoopIterator)/2]=SensorQuantised.Current[(LoopIterator)/2]<<4+quantiz(cstart,cstep,Sensor.Current[LoopIterator]);
+
+        
+        // The following lines are used to iterate the select lines from 0 to 7
+        //following is an algorithm similar to counting binary numbers of 3 bits
+        for(SelectLineIterator=2;SelectLineIterator>=0;SelectLineIterator--)
+        {
+            if(SelectLinesB[SelectLineIterator]==0)
+            {
+                SelectLinesB[SelectLineIterator]=1;
+                break;
+            }
+            else SelectLinesB[SelectLineIterator]=0;
+    
+        }
+    
+    
+        wait_us(10.0); //  A delay of 10 microseconds between each sensor output. Can be changed.
+ 
+}
+    
+    
+//measurement of temperature
+//temperature measurement=> 4 thermistors, 1 temperature sensor
+//mux line 1=>temp sensor, mux lines 2 to 5 =>thermistors
+
+    for(LoopIterator=0; LoopIterator<5; LoopIterator++) 
+{       
+        //following lines read the sensor values and stores them in 'SensorData' structure variable 'Sensor'
+        Sensor.Temperature[LoopIterator]=(-90.7*3.3*TemperatureInput.read()+190.1543);
+        voltage_thermistor=TemperatureInput.read()*3.3;//voltage across thermistor
+        resistance_thermistor=24000*voltage_thermistor/(3.3-voltage_thermistor);//resistance of thermistor
+        //PanelTemperature will be updated depending on voltage_thermistor value later in the lines to follow
+        
+        if(LoopIterator%2==0)
+     {                
+            if(LoopIterator<1)                      //->corresponding to temperature sensor
+                SensorQuantised.Temperature[(LoopIterator)/2]=quantiz(tstart,tstep,Sensor.Temperature[LoopIterator]);
+         
+            else                                    //->corresponding to thermistor
+            {    
+                if(voltage_thermistor<1.378) //Temperature>12 degC
+                    Sensor.PanelTemperature[(LoopIterator-1)]=(3694/log(24.032242*resistance_thermistor));
+                    
+                else   
+                    Sensor.PanelTemperature[(LoopIterator-1)]=(3365.4792/log(7.60404*resistance_thermistor));
+                    
+                    
+                SensorQuantised.PanelTemperature[(LoopIterator-1)/2]=quantiz(tstart_thermistor,tstep_thermistor,Sensor.PanelTemperature[(LoopIterator-1)]);
+                    
+            }
+            
+     } 
+    
+    else
+     {           
+            if(LoopIterator<1)
+                SensorQuantised.Temperature[(LoopIterator)/2]=SensorQuantised.Temperature[(LoopIterator)/2]<<4+quantiz(tstart,tstep,Sensor.Temperature[LoopIterator]); 
+            
+            else
+             {  
+                if(voltage_thermistor<1.378) //Temperature>12 degC 
+                     Sensor.PanelTemperature[LoopIterator-1]=(3694/log(24.032242*resistance_thermistor));
+                                    
+                  
+                else
+                     Sensor.PanelTemperature[LoopIterator-1]=(3365.4792/log(7.60404*resistance_thermistor));
+                    
+                SensorQuantised.PanelTemperature[(LoopIterator-1)/2]=SensorQuantised.PanelTemperature[(LoopIterator-1)/2]<<4+quantiz(tstart_thermistor,tstep_thermistor,Sensor.PanelTemperature[LoopIterator-1]);
+                  
+            }
+            
+      }
+      
+
+    
+    
+// The following lines are used to iterate the select lines from 0 to 4
+    
+       //following is an algorithm similar to counting binary numbers of 4 bit
+       for(SelectLineIterator=3;SelectLineIterator>=0;SelectLineIterator--)
+        {
+            if(SelectLinesC[SelectLineIterator]==0)
+            {
+                SelectLinesC[SelectLineIterator]=1;
+                break;
+            }
+            else SelectLinesC[SelectLineIterator]=0;
+    
+        }
+    
+    
+        wait_us(10.0); //  A delay of 10 microseconds between each sensor output. Can be changed.
+        
+}
+
+
+ 
+
+    
+    //update magnetometer data->
+    //populate values in structure variable 'Sensor' from data to be given by Green
+     SensorQuantised.AngularSpeed[0]=quantiz(AngularSpeed_start,AngularSpeed_step,Sensor.AngularSpeed[1]);
+     SensorQuantised.AngularSpeed[0]=SensorQuantised.AngularSpeed[0]<<4+quantiz(AngularSpeed_start,AngularSpeed_step,Sensor.AngularSpeed[0]);
+     SensorQuantised.AngularSpeed[1]=quantiz(AngularSpeed_start,AngularSpeed_step,Sensor.AngularSpeed[2]);
+     
+     //update gyro data->
+    //populate values in structure variable 'Sensor' from data to be given by Green
+     SensorQuantised.Bnewvalue[0]=quantiz(Bnewvalue_start,Bnewvalue_step,Sensor.Bnewvalue[1]);
+     SensorQuantised.Bnewvalue[0]=SensorQuantised.Bnewvalue[0]<<4+quantiz(Bnewvalue_start,Bnewvalue_step,Sensor.Bnewvalue[0]);
+     SensorQuantised.Bnewvalue[1]=quantiz(Bnewvalue_start,Bnewvalue_step,Sensor.Bnewvalue[2]);
+
+     
+     
+     
+      //update beacon structure
+    init_beacon(&Shortbeacon,SensorQuantised);//Shortbeacon is passed 
+    
+    
+}
+
+
+