Revision 0:a275ef704eb8, committed 2016-01-11

Comitter:

rpocc

Date:

Mon Jan 11 09:35:33 2016 +0000

Commit message:

The first version of this mbed port

Changed in this revision

diff -r 000000000000 -r a275ef704eb8 UTouch.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UTouch.cpp	Mon Jan 11 09:35:33 2016 +0000
@@ -0,0 +1,344 @@
+/** \file UTouch.h
+ *  \brief mbed library for XPT2046 SPI Touchscreen Controller (TFT_320QVT module).
+ *  \copyright GNU Public License, v2. or later
+ *
+ * A known display with this type of controller chip is the ITDB02-3.2S
+ * from http://imall.iteadstudio.com
+ *
+ * This library is based on the Arduino/chipKIT UTFT library by Henning
+ * Karlsen, http://www.rinkydinkelectronics.com/library.php?id=55
+ *
+ * Pressure sensivity added by Dmitry Shtatnov
+ *
+ * Copyright (C)2010-2015 Henning Karlsen. All right reserved.
+ *
+ * Copyright (C)2016 Dmitry Shtatnov. All right reserved.
+ * http://modularsynth.ru/
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to:
+ *
+ * Free Software Foundation, Inc.
+ * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
+ *
+ *********************************************************************/
+
+#include "UTouch.h"
+#include "UTouchCD.h"
+
+void UTouch::touch_WriteData(byte data)
+{
+    byte temp;
+
+    temp=data;
+    P_CLK = LOW;
+
+    for(byte count=0; count<8; count++)
+    {
+        if(temp & 0x80)
+            P_DIN = HIGH;
+        else
+            P_DIN = LOW;
+        temp = temp << 1; 
+        P_CLK = LOW;
+        P_CLK = HIGH;
+    }
+}
+
+word UTouch::touch_ReadData()
+{
+    word data = 0;
+
+    for(byte count=0; count<12; count++)
+    {
+        data <<= 1;
+        P_CLK = HIGH;
+        P_CLK = LOW;
+        if (P_DOUT)
+            data++;
+    }
+    return(data);
+}
+
+UTouch::UTouch(PinName tclk, PinName tcs, PinName din, PinName dout, PinName irq)
+    :P_CLK(tclk), P_CS(tcs), P_DIN(din), P_DOUT(dout), P_IRQ(irq)
+{
+}
+
+void UTouch::InitTouch(byte orientation)
+{
+    orient                  = orientation;
+    _default_orientation    = CAL_S>>31;
+    touch_x_left            = (CAL_X>>14) & 0x3FFF;
+    touch_x_right           = CAL_X & 0x3FFF;
+    touch_y_top             = (CAL_Y>>14) & 0x3FFF;
+    touch_y_bottom          = CAL_Y & 0x3FFF;
+    disp_x_size             = (CAL_S>>12) & 0x0FFF;
+    disp_y_size             = CAL_S & 0x0FFF;
+    prec                    = 10;
+    
+    P_IRQ.output();
+
+    P_CS = HIGH;
+    P_CLK = HIGH;
+    P_DIN = HIGH;
+    P_IRQ = HIGH;
+    touch_tresholdLow = -1024;
+    touch_tresholdHigh = 2048;
+
+}
+
+int16_t UTouch::touch_getrawdata(uint8_t code) {
+    int16_t tmp;
+    P_CS = LOW;
+    P_IRQ.input();
+    if(!P_IRQ) {
+        touch_WriteData(code);
+        P_CLK = HIGH; P_CLK = LOW;
+        tmp = touch_ReadData();
+    }
+    else {
+        tmp = 0;
+    }
+    P_IRQ.output();
+    P_CS = LOW;
+    return tmp;
+}
+    
+int16_t UTouch::GetPressure()
+{
+    int16_t _ry, _rz1, _rz2;
+    _ry = GetYraw();
+    _rz1 = GetZ1raw();
+    _rz2 = GetZ2raw();
+    return _ry*_rz1/_rz2-_ry-5000;
+}
+
+void UTouch::SetTreshold(int16_t trshLow, int16_t trshHigh)
+{
+    touch_tresholdLow = trshLow;
+    touch_tresholdHigh = trshLow;
+}
+
+int16_t UTouch::GetXraw()
+{
+    return touch_getrawdata(0x90);
+}
+
+int16_t UTouch::GetYraw()
+{
+    return touch_getrawdata(0xD0);
+}
+
+int16_t UTouch::GetZ1raw()
+{
+    return touch_getrawdata(0xC0);
+}
+
+int16_t UTouch::GetZ2raw()
+{
+    return touch_getrawdata(0xB0);
+}
+
+bool UTouch::Read()
+{
+    unsigned long tx=0, temp_x=0;
+    unsigned long ty=0, temp_y=0;
+    unsigned long minx=99999, maxx=0;
+    unsigned long miny=99999, maxy=0;
+    int datacount=0;
+    uint16_t _press;
+
+        _press = GetPressure();
+        if((_press>touch_tresholdLow)&&(_press<touch_tresholdHigh))
+        {
+    
+            P_CS = LOW;
+
+            P_IRQ.input();
+            for (int i=0; i<prec; i++)
+            {
+                if (!P_IRQ)
+                {
+                    touch_WriteData(0x90);        
+                    P_CLK = HIGH; P_CLK = LOW;
+                    temp_x=touch_ReadData();
+        
+                    if (!P_IRQ)
+                    {
+                        touch_WriteData(0xD0);      
+                        P_CLK = HIGH; P_CLK = LOW;
+                        temp_y=touch_ReadData();
+        
+                        if ((temp_x>0) and (temp_x<4096) and (temp_y>0) and (temp_y<4096))
+                        {
+                            tx+=temp_x;
+                            ty+=temp_y;
+                            if (prec>5)
+                            {
+                                if (temp_x<minx)
+                                    minx=temp_x;
+                                if (temp_x>maxx)
+                                    maxx=temp_x;
+                                if (temp_y<miny)
+                                    miny=temp_y;
+                                if (temp_y>maxy)
+                                    maxy=temp_y;
+                            }
+                            datacount++;
+                        }
+                    }
+                }
+            }
+        }
+    P_IRQ.output();
+
+    if (prec>5)
+    {
+        tx = tx-(minx+maxx);
+        ty = ty-(miny+maxy);
+        datacount -= 2;
+    }
+
+    P_CS = HIGH;
+    if ((datacount==(prec-2)) or (datacount==PREC_LOW))
+    {
+        if (orient == _default_orientation)
+        {
+            TP_X=ty/datacount;
+            TP_Y=tx/datacount;
+            return true;
+        }
+        else
+        {
+            TP_X=tx/datacount;
+            TP_Y=ty/datacount;
+            return true;
+        }
+    }
+    else
+    {
+        TP_X=-1;
+        TP_Y=-1;
+        return false;
+    }
+}
+
+bool UTouch::DataAvailable()
+{
+    bool avail;
+    P_IRQ.input();
+    avail = !(P_IRQ);
+    P_IRQ.output();
+    return avail;
+}
+
+int16_t UTouch::GetX()
+{
+    long c;
+
+    if ((TP_X==-1) or (TP_Y==-1))
+        return -1;
+    if (orient == _default_orientation)
+    {
+        c = long(long(TP_X - touch_x_left) * (disp_x_size)) / long(touch_x_right - touch_x_left);
+        if (c<0)
+            c = 0;
+        if (c>disp_x_size)
+            c = disp_x_size;
+    }
+    else
+    {
+        if (_default_orientation == PORTRAIT)
+            c = long(long(TP_X - touch_y_top) * (-disp_y_size)) / long(touch_y_bottom - touch_y_top) + long(disp_y_size);
+        else
+            c = long(long(TP_X - touch_y_top) * (disp_y_size)) / long(touch_y_bottom - touch_y_top);
+        if (c<0)
+            c = 0;
+        if (c>disp_y_size)
+            c = disp_y_size;
+    }
+    return c;
+}
+
+int16_t UTouch::GetY()
+{
+    int c;
+
+    if ((TP_X==-1) or (TP_Y==-1))
+        return -1;
+    if (orient == _default_orientation)
+    {
+        c = long(long(TP_Y - touch_y_top) * (disp_y_size)) / long(touch_y_bottom - touch_y_top);
+        if (c<0)
+            c = 0;
+        if (c>disp_y_size)
+            c = disp_y_size;
+    }
+    else
+    {
+        if (_default_orientation == PORTRAIT)
+            c = long(long(TP_Y - touch_x_left) * (disp_x_size)) / long(touch_x_right - touch_x_left);
+        else
+            c = long(long(TP_Y - touch_x_left) * (-disp_x_size)) / long(touch_x_right - touch_x_left) + long(disp_x_size);
+        if (c<0)
+            c = 0;
+        if (c>disp_x_size)
+            c = disp_x_size;
+    }
+    return c;
+}
+
+void UTouch::SetPrecision(byte precision)
+{
+    switch (precision)
+    {
+        case PREC_LOW:
+            prec=1;     // DO NOT CHANGE!
+            break;
+        case PREC_MEDIUM:
+            prec=12;    // Iterations + 2
+            break;
+        case PREC_HI:
+            prec=27;    // Iterations + 2
+            break;
+        case PREC_EXTREME:
+            prec=102;   // Iterations + 2
+            break;
+        default:
+            prec=12;    // Iterations + 2
+            break;
+    }
+}
+
+void UTouch::CalibrateRead()
+{
+    unsigned long tx=0;
+    unsigned long ty=0;
+
+    P_CS = LOW;
+
+    touch_WriteData(0x90);        
+    P_CLK = HIGH; P_CLK = LOW;
+    tx=touch_ReadData();
+
+    touch_WriteData(0xD0);      
+    P_CLK = HIGH; P_CLK = LOW;
+    ty=touch_ReadData();
+
+    P_CS = HIGH;
+
+    TP_X=ty;
+    TP_Y=tx;
+}
+

diff -r 000000000000 -r a275ef704eb8 UTouch.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UTouch.h	Mon Jan 11 09:35:33 2016 +0000
@@ -0,0 +1,152 @@
+/** \file UTouch.h
+ *  \brief mbed library for XPT2046 SPI Touchscreen Controller (TFT_320QVT module).
+ *  \copyright GNU Public License, v2. or later
+ *
+ * A known display with this type of controller chip is the ITDB02-3.2S
+ * from http://imall.iteadstudio.com
+ *
+ * This library is based on the Arduino/chipKIT UTFT library by Henning
+ * Karlsen, http://www.rinkydinkelectronics.com/library.php?id=55
+ *
+ * Pressure sensivity added by Dmitry Shtatnov
+ *
+ * Copyright (C)2010-2015 Henning Karlsen. All right reserved.
+ *
+ * Copyright (C)2016 Dmitry Shtatnov. All right reserved.
+ * http://modularsynth.ru/
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to:
+ *
+ * Free Software Foundation, Inc.
+ * 51 Franklin St, 5th Floor, Boston, MA 02110-1301, USA
+ *
+ *********************************************************************/
+
+#include "mbed.h"
+
+#ifndef UTouch_h
+#define UTouch_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** Represents a Touchscreen instance.
+ *
+ * This is the utility class, through which the XPT2046 touchscreen can be manipulated
+ * How to use:
+ * \code
+ * // If you are using TFT-320QVT TFT LCD module or similar, you also have to add
+ * // SSD1289 library by Todor Todorov or modified version by Dmitry Shtatnov
+ * 
+ * #include "mbed.h"
+ * #include "ssd1289.h"
+ * #include "UTouch.h"
+ * PortOut LCDPA(PortA,0xFF00);
+ * PortOut LCDPC(PortC,0x00FF);
+ * //                 CS,   REST, RS,   WR,   DATA,      BL, RD
+ * SSD1289_LCD myGLCD(PB_3, PB_4, PB_0, PB_1, &LCDPA, &LCDPC, NC, PB_2);
+ * 
+ * UTouch  myTouch(PB_9, PB_8, PB_7, PB_6, PB_5);
+ * 
+ * int main() {
+ *   myGLCD.Initialize();
+ *   myGLCD.SetBackground(COLOR_WHITE);
+ *   myGLCD.SetForeground(COLOR_BLACK);
+ *   myGLCD.FillScreen(COLOR_WHITE);
+ *   myTouch.InitTouch();
+ *   myTouch.SetPrecision(PREC_HI);
+ *   while(1==1)
+ *   {
+ *     if (myTouch.DataAvailable())
+ *     {
+ *       if(myTouch.Read())
+ *       {
+ *         x = myTouch.GetX();
+ *         y = myTouch.GetY();
+ *         myGLCD.DrawPixel(x, y, COLOR_BLACK);
+ *       }
+ *     }
+ *   }
+ * }
+ *
+ * \endcode
+ * \version 0.1
+ * \author Dmitry Shtatnov
+ */
+
+
+#define UTOUCH_VERSION  124
+
+// *** Hardwarespecific defines ***
+#define swap(type, i, j) {type t = i; i = j; j = t;}
+
+#define LOW                 0
+#define HIGH                1
+
+#define PORTRAIT            0
+#define LANDSCAPE           1
+
+#define PREC_LOW            1
+#define PREC_MEDIUM         2
+#define PREC_HI             3
+#define PREC_EXTREME        4
+
+#define byte uint8_t
+#define word uint16_t
+class UTouch
+{
+    public:
+        int16_t TP_X ,TP_Y, TP_Z1, TP_Z2;
+
+                UTouch(PinName tclk, PinName tcs, PinName tdin, PinName dout, PinName irq);
+
+        void    InitTouch(byte orientation = LANDSCAPE);
+        bool    Read();
+        bool    DataAvailable();
+        int16_t GetX();
+        int16_t GetY();
+        void    SetPrecision(byte precision);
+
+        void    CalibrateRead();
+        int16_t GetPressure();
+        void    SetTreshold(int16_t trshLow, int16_t trshHigh);
+    
+    protected:
+        int16_t GetXraw();
+        int16_t GetYraw();
+        int16_t GetZ1raw();
+        int16_t GetZ2raw();
+        DigitalOut P_CLK, P_CS, P_DIN;
+        DigitalIn P_DOUT;
+        DigitalInOut P_IRQ;
+        long    _default_orientation;
+        byte    orient;
+        byte    prec;
+        byte    display_model;
+        long    disp_x_size, disp_y_size, default_orientation;
+        long    touch_x_left, touch_x_right, touch_y_top, touch_y_bottom;
+
+        void    touch_WriteData(byte data);
+        word    touch_ReadData();
+        int16_t touch_tresholdLow;
+        int16_t touch_tresholdHigh;
+        int16_t touch_getrawdata(uint8_t code);
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
\ No newline at end of file

diff -r 000000000000 -r a275ef704eb8 UTouchCD.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UTouchCD.h	Mon Jan 11 09:35:33 2016 +0000
@@ -0,0 +1,43 @@
+// UTouchCD.h
+// ----------
+//
+// Since there are slight deviations in all touch screens you should run a
+// calibration on your display module. Run the UTouch_Calibration sketch
+// that came with this library and follow the on-screen instructions to
+// update this file.
+//
+// Remember that is you have multiple display modules they will probably 
+// require different calibration data so you should run the calibration
+// every time you switch to another module.
+// You can, of course, store calibration data for all your modules here
+// and comment out the ones you dont need at the moment.
+//
+
+// These calibration settings works with my ITDB02-3.2S.
+// They MIGHT work on your 320x240 display module, but you should run the
+// calibration sketch anyway. If you are using a display with any other
+// resolution you MUST calibrate it as these settings WILL NOT work.
+//#define CAL_X 0x00378F66UL
+//#define CAL_Y 0x03C34155UL
+//#define CAL_S 0x000EF13FUL
+
+//#define CAL_X 0x001DC771UL
+//#define CAL_Y 0x01E200A6UL
+//#define CAL_S 0x000EF13FUL
+
+#ifndef UTouchCD_h
+#define UTouchCD_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CAL_X   0x003B8EE2UL
+#define CAL_Y   0x03C4014CUL
+#define CAL_S   0x000EF13FUL
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
\ No newline at end of file