konashi/SBBLEのテスト

Dependencies:   BLE_API mbed

Fork of BLE_LoopbackUART by Bluetooth Low Energy

Embed: (wiki syntax)

« Back to documentation index

Show/hide line numbers app_button.h Source File

app_button.h

Go to the documentation of this file.
00001 /* Copyright (c) 2012 Nordic Semiconductor. All Rights Reserved.
00002  *
00003  * The information contained herein is property of Nordic Semiconductor ASA.
00004  * Terms and conditions of usage are described in detail in NORDIC
00005  * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
00006  *
00007  * Licensees are granted free, non-transferable use of the information. NO
00008  * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
00009  * the file.
00010  *
00011  */
00012 
00013 /** @file
00014  *
00015  * @defgroup app_button Button Handler
00016  * @{
00017  * @ingroup app_common
00018  *
00019  * @brief Buttons handling module.
00020  *
00021  * @details The button handler uses the @ref app_gpiote to detect that a button has been
00022  *          pushed. To handle debouncing, it will start a timer in the GPIOTE event handler.
00023  *          The button will only be reported as pushed if the corresponding pin is still active when
00024  *          the timer expires. If there is a new GPIOTE event while the timer is running, the timer
00025  *          is restarted.
00026  *          Use the USE_SCHEDULER parameter of the APP_BUTTON_INIT() macro to select if the
00027  *          @ref app_scheduler is to be used or not.
00028  *
00029  * @note    The app_button module uses the app_timer module. The user must ensure that the queue in
00030  *          app_timer is large enough to hold the app_timer_stop() / app_timer_start() operations
00031  *          which will be executed on each event from GPIOTE module (2 operations), as well as other
00032  *          app_timer operations queued simultaneously in the application.
00033  *
00034  * @note    Even if the scheduler is not used, app_button.h will include app_scheduler.h, so when
00035  *          compiling, app_scheduler.h must be available in one of the compiler include paths.
00036  */
00037 
00038 #ifndef APP_BUTTON_H__
00039 #define APP_BUTTON_H__
00040 
00041 #include <stdint.h>
00042 #include <stdbool.h>
00043 #include "app_error.h "
00044 #include "app_scheduler.h "
00045 #include "nrf_gpio.h"
00046 
00047 #define APP_BUTTON_SCHED_EVT_SIZE sizeof(app_button_event_t)   /**< Size of button events being passed through the scheduler (is to be used for computing the maximum size of scheduler events). */
00048 #define APP_BUTTON_PUSH        1                               /**< Indicates that a button is pushed. */
00049 #define APP_BUTTON_RELEASE     0                               /**< Indicates that a button is released. */
00050 #define APP_BUTTON_ACTIVE_HIGH 1                               /**< Indicates that a button is active high. */
00051 #define APP_BUTTON_ACTIVE_LOW  0                               /**< Indicates that a button is active low. */
00052 
00053 /**@brief Button event handler type. */
00054 typedef void (*app_button_handler_t)(uint8_t pin_no, uint8_t button_action);
00055 
00056 /**@brief Type of function for passing events from the Button Handler module to the scheduler. */
00057 typedef uint32_t (*app_button_evt_schedule_func_t) (app_button_handler_t button_handler,
00058                                                     uint8_t              pin_no,
00059                                                     uint8_t              button_action);
00060 
00061 /**@brief Button configuration structure. */
00062 typedef struct
00063 {
00064     uint8_t              pin_no;           /**< Pin to be used as a button. */
00065     uint8_t              active_state;     /**< APP_BUTTON_ACTIVE_HIGH or APP_BUTTON_ACTIVE_LOW. */
00066     nrf_gpio_pin_pull_t  pull_cfg;         /**< Pull-up or -down configuration. */
00067     app_button_handler_t button_handler;   /**< Handler to be called when button is pushed. */
00068 } app_button_cfg_t;
00069 
00070 /**@brief  Pin transition direction struct. */
00071 typedef struct
00072 {
00073     uint32_t high_to_low;   /**Pin went from high to low */
00074     uint32_t low_to_high;   /**Pin went from low to high */
00075 } pin_transition_t;
00076 
00077 /**@brief Macro for initializing the Button Handler module.
00078  *
00079  * @details It will initialize the specified pins as buttons, and configure the Button Handler
00080  *          module as a GPIOTE user (but it will not enable button detection). It will also connect
00081  *          the Button Handler module to the scheduler (if specified).
00082  *
00083  * @param[in]  BUTTONS           Array of buttons to be used (type app_button_cfg_t, must be
00084  *                               static!).
00085  * @param[in]  BUTTON_COUNT      Number of buttons.
00086  * @param[in]  DETECTION_DELAY   Delay from a GPIOTE event until a button is reported as pushed.
00087  * @param[in]  USE_SCHEDULER     TRUE if the application is using the event scheduler,
00088  *                               FALSE otherwise.
00089  */
00090 /*lint -emacro(506, APP_BUTTON_INIT) */ /* Suppress "Constant value Boolean */
00091 #define APP_BUTTON_INIT(BUTTONS, BUTTON_COUNT, DETECTION_DELAY, USE_SCHEDULER)                     \
00092     do                                                                                             \
00093     {                                                                                              \
00094         uint32_t ERR_CODE = app_button_init((BUTTONS),                                             \
00095                                             (BUTTON_COUNT),                                        \
00096                                             (DETECTION_DELAY),                                     \
00097                                             (USE_SCHEDULER) ? app_button_evt_schedule : NULL);     \
00098         APP_ERROR_CHECK(ERR_CODE);                                                                 \
00099     } while (0)
00100 
00101 /**@brief Function for initializing the Buttons.
00102  *
00103  * @details This function will initialize the specified pins as buttons, and configure the Button
00104  *          Handler module as a GPIOTE user (but it will not enable button detection).
00105  *
00106  * @note Normally initialization should be done using the APP_BUTTON_INIT() macro, as that will take
00107  *       care of connecting the Buttons module to the scheduler (if specified).
00108  *
00109  * @note app_button_enable() function must be called in order to enable the button detection.
00110  *
00111  * @param[in]  p_buttons           Array of buttons to be used (NOTE: Must be static!).
00112  * @param[in]  button_count        Number of buttons.
00113  * @param[in]  detection_delay     Delay from a GPIOTE event until a button is reported as pushed.
00114  * @param[in]  evt_schedule_func   Function for passing button events to the scheduler. Point to
00115  *                                 app_button_evt_schedule() to connect to the scheduler. Set to
00116  *                                 NULL to make the Buttons module call the event handler directly
00117  *                                 from the delayed button push detection timeout handler.
00118  *
00119  * @return   NRF_SUCCESS on success, otherwise an error code.
00120  */
00121 uint32_t app_button_init(app_button_cfg_t *             p_buttons,
00122                          uint8_t                        button_count,
00123                          uint32_t                       detection_delay,
00124                          app_button_evt_schedule_func_t evt_schedule_func);
00125 
00126 /**@brief Function for enabling button detection.
00127  *
00128  * @retval  NRF_ERROR_INVALID_PARAM   GPIOTE has to many users.
00129  * @retval  NRF_ERROR_INVALID_STATE   Button or GPIOTE not initialized.
00130  * @retval  NRF_SUCCESS               Button detection successfully enabled.
00131  */
00132 uint32_t app_button_enable(void);
00133 
00134 /**@brief Function for disabling button detection.
00135  *
00136  * @retval  NRF_ERROR_INVALID_PARAM   GPIOTE has to many users.
00137  * @retval  NRF_ERROR_INVALID_STATE   Button or GPIOTE not initialized.
00138  * @retval  NRF_SUCCESS               Button detection successfully enabled.
00139  */
00140 uint32_t app_button_disable(void);
00141 
00142 /**@brief Function for checking if a button is currently being pushed.
00143  *
00144  * @param[in]  pin_no        Button pin to be checked.
00145  * @param[out] p_is_pushed   Button state.
00146  *
00147  * @retval     NRF_SUCCESS               State successfully read.
00148  * @retval     NRF_ERROR_INVALID_PARAM   Invalid pin_no.
00149  */
00150 uint32_t app_button_is_pushed(uint8_t pin_no, bool * p_is_pushed);
00151 
00152 
00153 // Type and functions for connecting the Buttons module to the scheduler:
00154 
00155 /**@cond NO_DOXYGEN */
00156 typedef struct
00157 {
00158     app_button_handler_t button_handler;
00159     uint8_t              pin_no;
00160     uint8_t              button_action;
00161 } app_button_event_t;
00162 
00163 static __INLINE void app_button_evt_get(void * p_event_data, uint16_t event_size)
00164 {
00165     app_button_event_t * p_buttons_event = (app_button_event_t *)p_event_data;
00166 
00167     APP_ERROR_CHECK_BOOL(event_size == sizeof(app_button_event_t));
00168     p_buttons_event->button_handler(p_buttons_event->pin_no, p_buttons_event->button_action);
00169 }
00170 
00171 static __INLINE uint32_t app_button_evt_schedule(app_button_handler_t button_handler,
00172                                                  uint8_t              pin_no,
00173                                                  uint8_t              button_action)
00174 {
00175     app_button_event_t buttons_event;
00176 
00177     buttons_event.button_handler = button_handler;
00178     buttons_event.pin_no         = pin_no;
00179     buttons_event.button_action  = button_action;
00180 
00181     return app_sched_event_put(&buttons_event, sizeof(buttons_event), app_button_evt_get);
00182 }
00183 /**@endcond */
00184 
00185 #endif // APP_BUTTON_H__
00186 
00187 /** @} */