Richard Nash
/
i2c_pca9685_test1
basic pca9685
Fork of ic2_test_bus by
PCA9685.h
- Committer:
- richnash
- Date:
- 2018-10-29
- Revision:
- 1:dbe78e80d722
File content as of revision 1:dbe78e80d722:
/**Library for PCA9685 16-channel, 12-bit PWM Fm+ I²C-bus LED controller * Example code * @code * *#include"PCA9685.h" *#include"mbed.h" * * * *PCA9685 pwm(D14,D15); * *void setServoPulse(uint8_t n, float pulse) { * float pulselength = 10000; // 10,000 units per seconds * pulse = 4094 * pulse / pulselength; * pwm.setPWM(n, 0, pulse); *} * *void initServoDriver() { * pwm.begin(); * pwm.setPrescale(64); //This value is decided for 10ms interval. * pwm.frequencyI2C(400000); //400kHz *} * * int main() { * * while(1){ * initServoDriver(); * wait(0.2); * setServoPulse(0, 2300); * setServoPulse(1, 500); * wait(0.5);//delay necessary to perform the action * setServoPulse(0, 1350); * setServoPulse(1, 1350); * wait(0.5); * setServoPulse(0,550); * setServoPulse(1, 2250); * wait(0.5); * setServoPulse(0, 2300); * wait(2); * for (int mov = 550; mov < 2300; mov++){ * setServoPulse(0, mov); * wait(0.001); * } * for (int mov = 500; mov < 2200; mov++){ * setServoPulse(1, mov); * wait(0.001); * } * } *} *@endcode * */ #ifndef PCA9685_H #define PCA9685_H #include "mbed.h" #include <cmath> //register definitions #define PCA9685_SUBADR1 0x2 #define PCA9685_SUBADR2 0x3 #define PCA9685_SUBADR3 0x4 #define PCA9685_MODE1 0x0 #define PCA9685_PRESCALE 0xFE #define LED0_ON_L 0x6 #define LED0_ON_H 0x7 #define LED0_OFF_L 0x8 #define LED0_OFF_H 0x9 #define ALLLED_ON_L 0xFA #define ALLLED_ON_H 0xFB #define ALLLED_OFF_L 0xFC #define ALLLED_OFF_H 0xFD class PCA9685 { public: PCA9685(PinName sda, PinName scl, int addr = 0x80); void frequencyI2C(int freq); void begin(void); //Initialize the controller void reset(void); //Reset the controller void setPrescale(uint8_t prescale);//setPrescale(prescale) /** Set prescale * * @param prescale: set scale for the PWM frequency * */ void setPWMFreq(float freq);//Set the pwm frequency /** Set frequency * * @param frequency in Hz * */ void setPWM(uint8_t num, uint16_t on, uint16_t off);//SetPWM(channel, on, off) /** Set the start (on) and the end (off) of the part of the PWM pulse of the channel * @param channel : from 0 to 15 the channel the should be update * @param on: from 0 to 4095 the tick when the signal should pass from low to high * @param off: from 0 to 4095 the tick when the signal should pass from high to low */ void setPWM_ALL(uint16_t on, uint16_t off); //SetPWM(on, off) private: void write8(uint8_t address, uint8_t data); char read8(char address); int _i2caddr; I2C i2c; }; #endif