Diff: serial_api.h

Revision:

66:9c8f0e3462fb

Parent:

64:e3affc9e7238

Child:

75:dc225afb6914

diff -r 5798e58a58b1 -r 9c8f0e3462fb serial_api.h
--- a/serial_api.h	Mon Aug 12 13:17:46 2013 +0300
+++ b/serial_api.h	Mon Aug 19 13:34:54 2013 +0300
@@ -1,69 +1,69 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_SERIAL_API_H
-#define MBED_SERIAL_API_H
-
-#include "device.h"
-
-#if DEVICE_SERIAL
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    ParityNone = 0,
-    ParityOdd = 1,
-    ParityEven = 2,
-    ParityForced1 = 3,
-    ParityForced0 = 4
-} SerialParity;
-
-typedef enum {
-    RxIrq,
-    TxIrq
-} SerialIrq;
-
-typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
-
-typedef struct serial_s serial_t;
-
-void serial_init       (serial_t *obj, PinName tx, PinName rx);
-void serial_free       (serial_t *obj);
-void serial_baud       (serial_t *obj, int baudrate);
-void serial_format     (serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
-
-void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
-void serial_irq_set    (serial_t *obj, SerialIrq irq, uint32_t enable);
-
-int  serial_getc       (serial_t *obj);
-void serial_putc       (serial_t *obj, int c);
-int  serial_readable   (serial_t *obj);
-int  serial_writable   (serial_t *obj);
-void serial_clear      (serial_t *obj);
-
-void serial_break_set  (serial_t *obj);
-void serial_break_clear(serial_t *obj);
-
-void serial_pinout_tx(PinName tx);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_SERIAL_API_H
+#define MBED_SERIAL_API_H
+
+#include "device.h"
+
+#if DEVICE_SERIAL
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ParityNone = 0,
+    ParityOdd = 1,
+    ParityEven = 2,
+    ParityForced1 = 3,
+    ParityForced0 = 4
+} SerialParity;
+
+typedef enum {
+    RxIrq,
+    TxIrq
+} SerialIrq;
+
+typedef void (*uart_irq_handler)(uint32_t id, SerialIrq event);
+
+typedef struct serial_s serial_t;
+
+void serial_init       (serial_t *obj, PinName tx, PinName rx);
+void serial_free       (serial_t *obj);
+void serial_baud       (serial_t *obj, int baudrate);
+void serial_format     (serial_t *obj, int data_bits, SerialParity parity, int stop_bits);
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id);
+void serial_irq_set    (serial_t *obj, SerialIrq irq, uint32_t enable);
+
+int  serial_getc       (serial_t *obj);
+void serial_putc       (serial_t *obj, int c);
+int  serial_readable   (serial_t *obj);
+int  serial_writable   (serial_t *obj);
+void serial_clear      (serial_t *obj);
+
+void serial_break_set  (serial_t *obj);
+void serial_break_clear(serial_t *obj);
+
+void serial_pinout_tx(PinName tx);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif