Ricardo Benitez
meh
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal_adc.h
- Revision:
- 92:4fc01daae5a5
- Parent:
- 84:0b3ab51c8877
- Child:
- 96:487b796308b0
--- a/TARGET_NUCLEO_L053R8/stm32l0xx_hal_adc.h Wed Oct 29 11:02:04 2014 +0000
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal_adc.h Thu Nov 27 13:33:22 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32l0xx_hal_adc.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 22-April-2014
+ * @version V1.1.0
+ * @date 18-June-2014
* @brief This file contains all the functions prototypes for the ADC firmware
* library.
******************************************************************************
@@ -106,13 +106,13 @@
This parameter can be a value of @ref ADC_Resolution
Note: This parameter can be modified only if ADC is disabled. */
uint32_t SamplingTime; /*!< The sample time value to be set for all channels.
- This parameter can be a value of @ref ADC_sampling_times.
- Note: This parameter can be modified only if there is no conversion is ongoing. */
+ This parameter can be a value of @ref ADC_sampling_times
+ Note: This parameter can be modified only if there is no conversion ongoing. */
uint32_t ScanDirection; /*!< The scan sequence direction.
- This parameter can be a value of @ref ADC_scan_direction.
+ This parameter can be a value of @ref ADC_scan_direction
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right.
- This parameter can be a value of @ref ADC_data_align.
+ This parameter can be a value of @ref ADC_data_align
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode.
This parameter can be set to ENABLE or DISABLE.
@@ -123,10 +123,10 @@
This parameter can be set to ENABLE or DISABLE.
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t ExternalTrigConvEdge; /*!< Select the external trigger edge and enable the trigger.
- This parameter can be a value of @ref ADC_External_trigger_Edge.
+ This parameter can be a value of @ref ADC_External_trigger_Edge
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t ExternalTrigConv; /*!< Select the external event used to trigger the start of conversion.
- This parameter can be a value of @ref ADC_External_trigger_Source.
+ This parameter can be a value of @ref ADC_External_trigger_Source
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests are performed in one shot mode (DMA transfer stop when number of conversions is reached)
or in Continuous mode (DMA transfer unlimited, whatever number of conversions).
@@ -135,10 +135,10 @@
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t EOCSelection; /*!< Specifies what EOC (End Of Conversion) flag is used for conversion polling and interruption:
end of single channel conversion or end of channels conversions sequence.
- This parameter can be a value of @ref ADC_EOCSelection. */
+ This parameter can be a value of @ref ADC_EOCSelection */
uint32_t Overrun; /*!< Select the behaviour in case of overrun: data preserved or overwritten
This parameter has an effect on regular channels only, including in DMA mode.
- This parameter can be a value of @ref ADC_Overrun.
+ This parameter can be a value of @ref ADC_Overrun
Note: This parameter can be modified only if there is no conversion is ongoing. */
uint32_t LowPowerAutoWait; /*!< Specifies the usage of dynamic low power Auto Delay: new conversion start only
when the previous conversion (for regular channel) is completed.
@@ -189,10 +189,10 @@
typedef struct
{
uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode: single/all channels.
- This parameter can be a value of @ref ADC_analog_watchdog_mode. */
+ This parameter can be a value of @ref ADC_analog_watchdog_mode */
uint32_t Channel; /*!< Selects which ADC channel to monitor by analog watchdog.
This parameter has an effect only if watchdog mode is configured on single channel (parameter WatchdogMode)
- This parameter can be a value of @ref ADC_channels. */
+ This parameter can be a value of @ref ADC_channels */
uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured in interrupt or polling mode.
This parameter can be set to ENABLE or DISABLE */
uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value.
@@ -400,9 +400,9 @@
#define ADC_CHANNEL_18 ((uint32_t)(ADC_CHSELR_CHSEL18)| ADC_CFGR1_AWDCH_4| ADC_CFGR1_AWDCH_1)
/* Internal channels */
-#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_16
+#define ADC_CHANNEL_VLCD ADC_CHANNEL_16
#define ADC_CHANNEL_VREFINT ADC_CHANNEL_17
-#define ADC_CHANNEL_VLCD ADC_CHANNEL_18
+#define ADC_CHANNEL_TEMPSENSOR ADC_CHANNEL_18
#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_CHANNEL_0) || \
@@ -632,7 +632,7 @@
* @}
*/
-/** @defgroup ADC_regular_nb_conv_verification
+/** @defgroup ADC_regular_nb_conv_verification
* @{
*/
#define IS_ADC_REGULAR_NB_CONV(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16)))
@@ -837,7 +837,7 @@
* @retval None
*/
/* Note: bit cleared bit by writing 1 */
-#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) &= (__FLAG__))
+#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR) = (__FLAG__))
/**
* @brief Get the selected ADC's flag status.