Experiment of serial command protocol
Dependencies: RingBuffer SerialInterfaceProtocol duinotech_16x2_LCD mbed
You can edit this area
Diff: SerialInterfaceProtocol.cpp
- Revision:
- 4:658044ad7327
- Parent:
- 3:0c4aa3cec685
--- a/SerialInterfaceProtocol.cpp Thu Jun 16 03:52:01 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,281 +0,0 @@ -#include "SerialInterfaceProtocol.h" - -// #define DEBUG_MESSAGE - -SerialInterfaceProtocol::SerialInterfaceProtocol(SerialBuffer_t *in, SerialBuffer_t *out) -{ - // assign input and output buffers - SerialInputBuffer = in; - SerialOutputBuffer = out; - - // init command vector table - for (int i = 0; i < SIP_CMD_VECTOR_TABLE_SZ; i++) - { - CommandVectorTable[i] = NULL; - } - - // init internal state machine - state = CommandPacket::NONE; - - // init internal state - isChecksumEnabled = true; -} - -SerialInterfaceProtocol::~SerialInterfaceProtocol() -{ - -} - -void SerialInterfaceProtocol::registerCommand(uint8_t command, callback_func f) -{ - CommandVectorTable[command] = f; -} - -void SerialInterfaceProtocol::deRegisterCommand(uint8_t command) -{ - CommandVectorTable[command] = NULL; -} - -int SerialInterfaceProtocol::execute(uint8_t *response, uint8_t *response_length) -{ - - // execute the command if it's already been registered - if (CommandVectorTable[PacketBuffer.command] != NULL) - { - return CommandVectorTable[PacketBuffer.command]( - PacketBuffer.payload, - PacketBuffer.length, - response, - response_length - ); - } - - printf("Callback function not registered\r\n"); - - return -1; -} - -int SerialInterfaceProtocol::assemble(uint8_t *response, uint8_t response_length) -{ - // prepare for packet buffer - PacketBuffer.sflag = CommandPacket::CP_SFLAG; - - PacketBuffer.command = 0xE0 | ((uint8_t) PacketBuffer.errno & 0x0f); - - PacketBuffer.length = response_length; - - memcpy(PacketBuffer.payload, response, response_length); - - PacketBuffer.checksum = PacketBuffer.generate_checksum(); - - PacketBuffer.eflag = CommandPacket::CP_EFLAG; - - - // serialize the packet - int total_len = PacketBuffer.length * 2 + 8; - uint8_t buffer[total_len]; - memset(buffer, 0x0, total_len); - - PacketBuffer.serialize(buffer); - - // add to ring buffer - for (int i = 0; i < total_len; i++) - { - SerialOutputBuffer->enqueue(buffer[i]); - } - - return 0; - -} - -void SerialInterfaceProtocol::poll() -{ - static uint8_t payload_counter = 0; - uint8_t response[SIP_MAX_RESP_LEN]; - uint8_t response_length; - - // fetch data from ring buffer - while (SerialInputBuffer->getCounter() > 0) - { - uint8_t ch; - ch = SerialInputBuffer->dequeue(); - - // reset state to keep sync - if (ch == CommandPacket::CP_SFLAG) - { - state = CommandPacket::SFLAG; - - // reset variable - payload_counter = 0; - memset(PacketBuffer.payload, 0x0, sizeof(PacketBuffer.payload)); - PacketBuffer.errno = CommandPacket::NO_ERROR; - } - - switch (state) - { - case CommandPacket::SFLAG: - PacketBuffer.sflag = ch; - state = CommandPacket::COMMAND_H; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::SFLAG: 0x%x\r\n", PacketBuffer.sflag); -#endif - break; - - case CommandPacket::COMMAND_H: - PacketBuffer.command = hexchar_to_uint8(ch) << 4; - state = CommandPacket::COMMAND_L; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::COMMAND_H: 0x%x\r\n", PacketBuffer.command); -#endif - break; - - case CommandPacket::COMMAND_L: - PacketBuffer.command |= (hexchar_to_uint8(ch) & 0x0f); - state = CommandPacket::LENGTH_H; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::COMMAND_L: 0x%x\r\n", PacketBuffer.command); -#endif - break; - - case CommandPacket::LENGTH_H: - PacketBuffer.length = hexchar_to_uint8(ch) << 4; - state = CommandPacket::LENGTH_L; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::LENGTH_H: 0x%x\r\n", PacketBuffer.length); -#endif - break; - - case CommandPacket::LENGTH_L: - PacketBuffer.length |= (hexchar_to_uint8(ch) & 0x0f); - if (PacketBuffer.length != 0) // if the length is not zero, then proceed to payload state - { - state = CommandPacket::PAYLOAD_H; - } - else // otherwise proceed to checksum state - { - state = CommandPacket::CHECKSUM_H; - } -#ifdef DEBUG_MESSAGE - printf("CommandPacket::LENGTH_L: 0x%x\r\n", PacketBuffer.length); -#endif - break; - - case CommandPacket::PAYLOAD_H: - PacketBuffer.payload[payload_counter] = hexchar_to_uint8(ch) << 4; // store higher 4 bits of payload - state = CommandPacket::PAYLOAD_L; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::PAYLOAD_H: 0x%x\r\n", PacketBuffer.payload[payload_counter]); -#endif - break; - - case CommandPacket::PAYLOAD_L: - PacketBuffer.payload[payload_counter++] |= (hexchar_to_uint8(ch) & 0x0f); // store lower 4 bits of payload - if (payload_counter < PacketBuffer.length) // append ch to payload until reach the length - { - state = CommandPacket::PAYLOAD_H; - } - else - { - state = CommandPacket::CHECKSUM_H; - } -#ifdef DEBUG_MESSAGE - printf("CommandPacket::PAYLOAD_L: 0x%x\r\n", PacketBuffer.payload[payload_counter - 1]); -#endif - break; - - case CommandPacket::CHECKSUM_H: - PacketBuffer.checksum = hexchar_to_uint8(ch) << 4; - state = CommandPacket::CHECKSUM_L; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::CHECKSUM_H: 0x%x\r\n", PacketBuffer.checksum); -#endif - break; - - case CommandPacket::CHECKSUM_L: - PacketBuffer.checksum |= (hexchar_to_uint8(ch) & 0x0f); - - // checksum can be turned off - if (isChecksumEnabled) - { - if (PacketBuffer.verify()) // checksum match - { - state = CommandPacket::EFLAG; - } - else // checksum mismatch - { - PacketBuffer.errno = CommandPacket::INVALID_CS_ERROR; - - // prepare for checksum error response - PacketBuffer.errno = CommandPacket::INVALID_CS_ERROR; - assemble(response, response_length); - - state = CommandPacket::NONE; - } - } - else - { - state = CommandPacket::EFLAG; - } - - -#ifdef DEBUG_MESSAGE - printf("CommandPacket::CHECKSUM_L: 0x%x\r\n", PacketBuffer.checksum); -#endif - break; - - case CommandPacket::EFLAG: - if (ch == CommandPacket::CP_EFLAG) - { - PacketBuffer.eflag = ch; - - // clear response and response length - response_length = 0; - memset(response, 0x0, sizeof(response)); - - // execute command - int ret = execute(response, &response_length); - - if (ret < 0) // command not registered - { - PacketBuffer.errno = CommandPacket::INVALID_CMD_ERROR; - } - else if (ret != 0) // error to execute - { - PacketBuffer.errno = CommandPacket::INVALID_EXEC_ERROR; - } - - assemble(response, response_length); - } - state = CommandPacket::NONE; -#ifdef DEBUG_MESSAGE - printf("CommandPacket::EFLAG: 0x%x\r\n", PacketBuffer.eflag); -#endif - break; - - case CommandPacket::NONE: - PacketBuffer.errno = CommandPacket::INVALID_SFLAG_ERROR; - - // TODO:: Execute error generator - PacketBuffer.errno = CommandPacket::INVALID_SFLAG_ERROR; - assemble(response, response_length); - -#ifdef DEBUG_MESSAGE - printf("CommandPacket::NONE\r\n"); -#endif - break; - - default: - break; - } - } -} - -void SerialInterfaceProtocol::disableChecksum() -{ - isChecksumEnabled = false; -} - -void SerialInterfaceProtocol::enableChecksum() -{ - isChecksumEnabled = true; -} \ No newline at end of file