Rajath Ravi / Mbed 2 deprecated ravi_blinkycode

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Dependencies:   mbed

Embed: (wiki syntax)

« Back to documentation index

TIM_Private_Functions
Modules | Functions

TIM_Private_Functions
[TIM]

Modules

 TimeBase management functions
 

TimeBase management functions.


 Output Compare management functions
 

Output Compare management functions.


 Input Capture management functions
 

Input Capture management functions.


 Advanced-control timers (TIM1_MORT and TIM8_MORT) specific features
 

Advanced-control timers (TIM1_MORT and TIM8_MORT) specific features.


 Interrupts DMA and flags management functions
 

Interrupts, DMA and flags management functions.


 Clocks management functions
 

Clocks management functions.


 Synchronization management functions
 

Synchronization management functions.


 Specific interface management functions
 

Specific interface management functions.


 Specific remapping management function
 

Specific remapping management function.


Functions

static void TI1_Config_mort (TIM_TypeDef_mort *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI1 as Input.
static void TI2_Config_mort (TIM_TypeDef_mort *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI2 as Input.
static void TI3_Config_mort (TIM_TypeDef_mort *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI3 as Input.
static void TI4_Config_mort (TIM_TypeDef_mort *TIMx, uint16_t TIM_ICPolarity, uint16_t TIM_ICSelection, uint16_t TIM_ICFilter)
 Configure the TI4 as Input.

Function Documentation

static void TI1_Config_mort ( TIM_TypeDef_mort *  TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
) [static]

Configure the TI1 as Input.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5, 8, 9, 10, 11, 12, 13 or 14 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:

  • TIM_ICPolarity_Rising_MORT
  • TIM_ICPolarity_Falling_MORT
  • TIM_ICPolarity_BothEdge_MORT
TIM_ICSelection,:specifies the input to be used. This parameter can be one of the following values:

  • TIM_ICSelection_DirectTI_MORT: TIM Input 1 is selected to be connected to IC1.
  • TIM_ICSelection_IndirectTI_MORT: TIM Input 1 is selected to be connected to IC2.
  • TIM_ICSelection_TRC_MORT: TIM Input 1 is selected to be connected to TRC.
TIM_ICFilter,:Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values:
None

Definition at line 3204 of file stm32f4xx_tim_mort.c.

static void TI2_Config_mort ( TIM_TypeDef_mort *  TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
) [static]

Configure the TI2 as Input.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5, 8, 9 or 12 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:

  • TIM_ICPolarity_Rising_MORT
  • TIM_ICPolarity_Falling_MORT
  • TIM_ICPolarity_BothEdge_MORT
TIM_ICSelection,:specifies the input to be used. This parameter can be one of the following values:

  • TIM_ICSelection_DirectTI_MORT: TIM Input 2 is selected to be connected to IC2.
  • TIM_ICSelection_IndirectTI_MORT: TIM Input 2 is selected to be connected to IC1.
  • TIM_ICSelection_TRC_MORT: TIM Input 2 is selected to be connected to TRC.
TIM_ICFilter,:Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values:
None

Definition at line 3245 of file stm32f4xx_tim_mort.c.

static void TI3_Config_mort ( TIM_TypeDef_mort *  TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
) [static]

Configure the TI3 as Input.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:

  • TIM_ICPolarity_Rising_MORT
  • TIM_ICPolarity_Falling_MORT
  • TIM_ICPolarity_BothEdge_MORT
TIM_ICSelection,:specifies the input to be used. This parameter can be one of the following values:

  • TIM_ICSelection_DirectTI_MORT: TIM Input 3 is selected to be connected to IC3.
  • TIM_ICSelection_IndirectTI_MORT: TIM Input 3 is selected to be connected to IC4.
  • TIM_ICSelection_TRC_MORT: TIM Input 3 is selected to be connected to TRC.
TIM_ICFilter,:Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values:
None

Definition at line 3287 of file stm32f4xx_tim_mort.c.

static void TI4_Config_mort ( TIM_TypeDef_mort *  TIMx,
uint16_t  TIM_ICPolarity,
uint16_t  TIM_ICSelection,
uint16_t  TIM_ICFilter 
) [static]

Configure the TI4 as Input.

Parameters:
TIMx,:where x can be 1, 2, 3, 4, 5 or 8 to select the TIM peripheral.
TIM_ICPolarity: The Input Polarity. This parameter can be one of the following values:

  • TIM_ICPolarity_Rising_MORT
  • TIM_ICPolarity_Falling_MORT
  • TIM_ICPolarity_BothEdge_MORT
TIM_ICSelection,:specifies the input to be used. This parameter can be one of the following values:

  • TIM_ICSelection_DirectTI_MORT: TIM Input 4 is selected to be connected to IC4.
  • TIM_ICSelection_IndirectTI_MORT: TIM Input 4 is selected to be connected to IC3.
  • TIM_ICSelection_TRC_MORT: TIM Input 4 is selected to be connected to TRC.
TIM_ICFilter,:Specifies the Input Capture Filter. This parameter must be a value between 0x00 and 0x0F.
Return values:
None

Definition at line 3328 of file stm32f4xx_tim_mort.c.

Generated on Sat Oct 21 2023 04:38:55 by  doxygen 1.7.2