Diff: ble/GattClient.h

Revision:

710:b2e1a2660ec2

Parent:

564:1d8aa4ad07fe

diff -r 77f6fc6999cd -r b2e1a2660ec2 ble/GattClient.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ble/GattClient.h	Fri Jun 19 15:53:28 2015 +0100
@@ -0,0 +1,229 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __GATT_CLIENT_H__
+#define __GATT_CLIENT_H__
+
+#include "Gap.h"
+#include "GattAttribute.h"
+#include "ServiceDiscovery.h"
+
+#include "GattCallbackParamTypes.h"
+
+class GattClient {
+public:
+    typedef void (*ReadCallback_t)(const GattReadCallbackParams *params);
+
+    enum WriteOp_t {
+        GATT_OP_WRITE_REQ      = 0x01,  /**< Write Request. */
+        GATT_OP_WRITE_CMD      = 0x02,  /**< Write Command. */
+    };
+
+    typedef void (*WriteCallback_t)(const GattWriteCallbackParams *params);
+
+    /*
+     * The following functions are meant to be overridden in the platform-specific sub-class.
+     */
+public:
+    /**
+     * Launch service discovery. Once launched, service discovery will remain
+     * active with callbacks being issued back into the application for matching
+     * services/characteristics. isServiceDiscoveryActive() can be used to
+     * determine status; and a termination callback (if setup) will be invoked
+     * at the end. Service discovery can be terminated prematurely if needed
+     * using terminateServiceDiscovery().
+     *
+     * @param  connectionHandle
+     *           Handle for the connection with the peer.
+     * @param  sc
+     *           This is the application callback for matching service. Taken as
+     *           NULL by default. Note: service discovery may still be active
+     *           when this callback is issued; calling asynchronous BLE-stack
+     *           APIs from within this application callback might cause the
+     *           stack to abort service discovery. If this becomes an issue, it
+     *           may be better to make local copy of the discoveredService and
+     *           wait for service discovery to terminate before operating on the
+     *           service.
+     * @param  cc
+     *           This is the application callback for matching characteristic.
+     *           Taken as NULL by default. Note: service discovery may still be
+     *           active when this callback is issued; calling asynchronous
+     *           BLE-stack APIs from within this application callback might cause
+     *           the stack to abort service discovery. If this becomes an issue,
+     *           it may be better to make local copy of the discoveredCharacteristic
+     *           and wait for service discovery to terminate before operating on the
+     *           characteristic.
+     * @param  matchingServiceUUID
+     *           UUID based filter for specifying a service in which the application is
+     *           interested. By default it is set as the wildcard UUID_UNKNOWN,
+     *           in which case it matches all services. If characteristic-UUID
+     *           filter (below) is set to the wildcard value, then a service
+     *           callback will be invoked for the matching service (or for every
+     *           service if the service filter is a wildcard).
+     * @param  matchingCharacteristicUUIDIn
+     *           UUID based filter for specifying characteristic in which the application
+     *           is interested. By default it is set as the wildcard UUID_UKNOWN
+     *           to match against any characteristic. If both service-UUID
+     *           filter and characteristic-UUID filter are used with non- wildcard
+     *           values, then only a single characteristic callback is
+     *           invoked for the matching characteristic.
+     *
+     * @note     Using wildcard values for both service-UUID and characteristic-
+     *           UUID will result in complete service discovery--callbacks being
+     *           called for every service and characteristic.
+     *
+     * @note     Providing NULL for the characteristic callback will result in
+     *           characteristic discovery being skipped for each matching
+     *           service. This allows for an inexpensive method to discover only
+     *           services.
+     *
+     * @return
+     *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
+     */
+    virtual ble_error_t launchServiceDiscovery(Gap::Handle_t                               connectionHandle,
+                                               ServiceDiscovery::ServiceCallback_t         sc                           = NULL,
+                                               ServiceDiscovery::CharacteristicCallback_t  cc                           = NULL,
+                                               const UUID                                 &matchingServiceUUID          = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN),
+                                               const UUID                                 &matchingCharacteristicUUIDIn = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) {
+        return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Launch service discovery for services. Once launched, service discovery will remain
+     * active with service-callbacks being issued back into the application for matching
+     * services. isServiceDiscoveryActive() can be used to
+     * determine status; and a termination callback (if setup) will be invoked
+     * at the end. Service discovery can be terminated prematurely if needed
+     * using terminateServiceDiscovery().
+     *
+     * @param  connectionHandle
+     *           Handle for the connection with the peer.
+     * @param  sc
+     *           This is the application callback for matching service. Note: service discovery may still be active
+     *           when this callback is issued; calling asynchronous BLE-stack
+     *           APIs from within this application callback might cause the
+     *           stack to abort service discovery. If this becomes an issue, it
+     *           may be better to make local copy of the discoveredService and
+     *           wait for service discovery to terminate before operating on the
+     *           service.
+     * @param  matchingServiceUUID
+     *           UUID based filter for specifying a service in which the application is
+     *           interested. By default it is set as the wildcard UUID_UNKNOWN,
+     *           in which case it matches all services.
+     *
+     * @return
+     *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
+     */
+    virtual ble_error_t discoverServices(Gap::Handle_t                        connectionHandle,
+                                         ServiceDiscovery::ServiceCallback_t  callback,
+                                         const UUID                          &matchingServiceUUID = UUID::ShortUUIDBytes_t(BLE_UUID_UNKNOWN)) {
+        return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Launch service discovery for services. Once launched, service discovery will remain
+     * active with service-callbacks being issued back into the application for matching
+     * services. isServiceDiscoveryActive() can be used to
+     * determine status; and a termination callback (if setup) will be invoked
+     * at the end. Service discovery can be terminated prematurely if needed
+     * using terminateServiceDiscovery().
+     *
+     * @param  connectionHandle
+     *           Handle for the connection with the peer.
+     * @param  sc
+     *           This is the application callback for matching service. Note: service discovery may still be active
+     *           when this callback is issued; calling asynchronous BLE-stack
+     *           APIs from within this application callback might cause the
+     *           stack to abort service discovery. If this becomes an issue, it
+     *           may be better to make local copy of the discoveredService and
+     *           wait for service discovery to terminate before operating on the
+     *           service.
+     * @param  startHandle, endHandle
+     *           Handle range within which to limit the search
+     *
+     * @return
+     *           BLE_ERROR_NONE if service discovery is launched successfully; else an appropriate error.
+     */
+    virtual ble_error_t discoverServices(Gap::Handle_t                        connectionHandle,
+                                         ServiceDiscovery::ServiceCallback_t  callback,
+                                         GattAttribute::Handle_t              startHandle,
+                                         GattAttribute::Handle_t              endHandle) {
+        return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Is service-discovery currently active?
+     */
+    virtual bool isServiceDiscoveryActive(void) const {
+        return false; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Terminate an ongoing service-discovery. This should result in an
+     * invocation of the TerminationCallback if service-discovery is active.
+     */
+    virtual void terminateServiceDiscovery(void) {
+        /* default implementation; override this API if this capability is supported. */
+    }
+
+    /* Initiate a Gatt Client read procedure by attribute-handle. */
+    virtual ble_error_t read(Gap::Handle_t connHandle, GattAttribute::Handle_t attributeHandle, uint16_t offset) const {
+        return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Initiate a GATT Client write procedure.
+     *
+     * @param[in] cmd
+     *              Command can be either a write-request (which generates a
+     *              matching response from the peripheral), or a write-command,
+     *              which doesn't require the connected peer to respond.
+     * @param[in] connHandle
+     *              Connection handle.
+     * @param[in] attributeHandle
+     *              handle for the target attribtue on the remote GATT server.
+     * @param[in] length
+     *              length of the new value.
+     * @param[in] value
+     *              new value being written.
+     */
+    virtual ble_error_t write(GattClient::WriteOp_t    cmd,
+                              Gap::Handle_t            connHandle,
+                              GattAttribute::Handle_t  attributeHandle,
+                              size_t                   length,
+                              const uint8_t           *value) const {
+        return BLE_ERROR_NOT_IMPLEMENTED; /* default implementation; override this API if this capability is supported. */
+    }
+
+    /**
+     * Setup callback for when serviceDiscovery terminates.
+     */
+    virtual void onServiceDiscoveryTermination(ServiceDiscovery::TerminationCallback_t callback) {
+        /* default implementation; override this API if this capability is supported. */
+    }
+
+protected:
+    GattClient() {
+        /* empty */
+    }
+
+private:
+    /* disallow copy and assignment */
+    GattClient(const GattClient &);
+    GattClient& operator=(const GattClient &);
+};
+
+#endif // ifndef __GATT_CLIENT_H__
\ No newline at end of file