BLE_API - Bike service

Users » ptuytsch » Code » BLE_API

Bike service

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1194:c8bbf3a6712d, 2016-04-06 (annotated)

Committer:: vcoubard
Date:: Wed Apr 06 19:15:48 2016 +0100
Revision:: 1194:c8bbf3a6712d
Parent:: 1193:718787de23b7

Synchronized with git rev 1ff1b5f8

Author: Vincent Coubard

Merge pull request #171 from andresag01/fix_adv_payload



Invalid adv payloads are not committed before checking

Who changed what in which revision?

User	Revision	Line number	New contents of line
vcoubard	1132:692ddf04fc42	1	/* mbed Microcontroller Library
vcoubard	1132:692ddf04fc42	2	* Copyright (c) 2006-2013 ARM Limited
vcoubard	1132:692ddf04fc42	3	*
vcoubard	1132:692ddf04fc42	4	* Licensed under the Apache License, Version 2.0 (the "License");
vcoubard	1132:692ddf04fc42	5	* you may not use this file except in compliance with the License.
vcoubard	1132:692ddf04fc42	6	* You may obtain a copy of the License at
vcoubard	1132:692ddf04fc42	7	*
vcoubard	1132:692ddf04fc42	8	* http://www.apache.org/licenses/LICENSE-2.0
vcoubard	1132:692ddf04fc42	9	*
vcoubard	1132:692ddf04fc42	10	* Unless required by applicable law or agreed to in writing, software
vcoubard	1132:692ddf04fc42	11	* distributed under the License is distributed on an "AS IS" BASIS,
vcoubard	1132:692ddf04fc42	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard	1132:692ddf04fc42	13	* See the License for the specific language governing permissions and
vcoubard	1132:692ddf04fc42	14	* limitations under the License.
vcoubard	1132:692ddf04fc42	15	*/
vcoubard	1132:692ddf04fc42	16
vcoubard	1132:692ddf04fc42	17	#ifndef __GAP_H__
vcoubard	1132:692ddf04fc42	18	#define __GAP_H__
vcoubard	1132:692ddf04fc42	19
vcoubard	1136:22aada733dbd	20	#include "ble/BLEProtocol.h"
vcoubard	1132:692ddf04fc42	21	#include "GapAdvertisingData.h"
vcoubard	1132:692ddf04fc42	22	#include "GapAdvertisingParams.h"
vcoubard	1132:692ddf04fc42	23	#include "GapScanningParams.h"
vcoubard	1132:692ddf04fc42	24	#include "GapEvents.h"
vcoubard	1132:692ddf04fc42	25	#include "CallChainOfFunctionPointersWithContext.h"
vcoubard	1132:692ddf04fc42	26	#include "FunctionPointerWithContext.h"
vcoubard	1136:22aada733dbd	27	#include "deprecate.h"
vcoubard	1132:692ddf04fc42	28
vcoubard	1132:692ddf04fc42	29	/* Forward declarations for classes that will only be used for pointers or references in the following. */
vcoubard	1132:692ddf04fc42	30	class GapAdvertisingParams;
vcoubard	1132:692ddf04fc42	31	class GapScanningParams;
vcoubard	1132:692ddf04fc42	32	class GapAdvertisingData;
vcoubard	1132:692ddf04fc42	33
vcoubard	1132:692ddf04fc42	34	class Gap {
vcoubard	1136:22aada733dbd	35	/*
vcoubard	1136:22aada733dbd	36	* DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard	1136:22aada733dbd	37	* They have been relocated to the class BLEProtocol.
vcoubard	1136:22aada733dbd	38	*/
vcoubard	1132:692ddf04fc42	39	public:
vcoubard	1136:22aada733dbd	40	/**
vcoubard	1136:22aada733dbd	41	* Address-type for BLEProtocol addresses.
vcoubard	1136:22aada733dbd	42	*
vcoubard	1184:1589830dbdb7	43	* @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard	1136:22aada733dbd	44	*/
vcoubard	1136:22aada733dbd	45	typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard	1136:22aada733dbd	46
vcoubard	1136:22aada733dbd	47	/**
vcoubard	1136:22aada733dbd	48	* Address-type for BLEProtocol addresses.
vcoubard	1184:1589830dbdb7	49	*
vcoubard	1184:1589830dbdb7	50	* @deprecated Use BLEProtocol::AddressType_t instead.
vcoubard	1136:22aada733dbd	51	*/
vcoubard	1136:22aada733dbd	52	typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard	1136:22aada733dbd	53
vcoubard	1136:22aada733dbd	54	/**
vcoubard	1136:22aada733dbd	55	* Address-type for BLEProtocol addresses.
vcoubard	1136:22aada733dbd	56	*
vcoubard	1184:1589830dbdb7	57	* @deprecated Use BLEProtocol::AddressType_t instead. The following
vcoubard	1184:1589830dbdb7	58	* constants have been left in their deprecated state to
vcoubard	1184:1589830dbdb7	59	* transparenly support existing applications which may have
vcoubard	1184:1589830dbdb7	60	* used Gap::ADDR_TYPE_*.
vcoubard	1136:22aada733dbd	61	*/
vcoubard	1136:22aada733dbd	62	enum DeprecatedAddressType_t {
vcoubard	1136:22aada733dbd	63	ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
vcoubard	1136:22aada733dbd	64	ADDR_TYPE_RANDOM_STATIC = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard	1136:22aada733dbd	65	ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_RESOLVABLE,
vcoubard	1136:22aada733dbd	66	ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
vcoubard	1132:692ddf04fc42	67	};
vcoubard	1132:692ddf04fc42	68
vcoubard	1184:1589830dbdb7	69	/**
vcoubard	1184:1589830dbdb7	70	* Length (in octets) of the BLE MAC address.
vcoubard	1184:1589830dbdb7	71	*/
vcoubard	1184:1589830dbdb7	72	static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN;
vcoubard	1184:1589830dbdb7	73	/**
vcoubard	1184:1589830dbdb7	74	* 48-bit address, LSB format.
vcoubard	1184:1589830dbdb7	75	*
vcoubard	1184:1589830dbdb7	76	* @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard	1184:1589830dbdb7	77	*/
vcoubard	1184:1589830dbdb7	78	typedef BLEProtocol::AddressBytes_t Address_t;
vcoubard	1184:1589830dbdb7	79	/**
vcoubard	1184:1589830dbdb7	80	* 48-bit address, LSB format.
vcoubard	1184:1589830dbdb7	81	*
vcoubard	1184:1589830dbdb7	82	* @deprecated Use BLEProtocol::AddressBytes_t instead.
vcoubard	1184:1589830dbdb7	83	*/
vcoubard	1184:1589830dbdb7	84	typedef BLEProtocol::AddressBytes_t address_t;
vcoubard	1132:692ddf04fc42	85
vcoubard	1136:22aada733dbd	86	public:
vcoubard	1184:1589830dbdb7	87	/**
vcoubard	1184:1589830dbdb7	88	* Enumeration for timeout sources.
vcoubard	1184:1589830dbdb7	89	*/
vcoubard	1132:692ddf04fc42	90	enum TimeoutSource_t {
vcoubard	1132:692ddf04fc42	91	TIMEOUT_SRC_ADVERTISING = 0x00, /*< Advertising timeout. /
vcoubard	1132:692ddf04fc42	92	TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /*< Security request timeout. /
vcoubard	1132:692ddf04fc42	93	TIMEOUT_SRC_SCAN = 0x02, /*< Scanning timeout. /
vcoubard	1132:692ddf04fc42	94	TIMEOUT_SRC_CONN = 0x03, /*< Connection timeout. /
vcoubard	1132:692ddf04fc42	95	};
vcoubard	1132:692ddf04fc42	96
vcoubard	1132:692ddf04fc42	97	/**
vcoubard	1132:692ddf04fc42	98	* Enumeration for disconnection reasons. The values for these reasons are
vcoubard	1132:692ddf04fc42	99	* derived from Nordic's implementation, but the reasons are meant to be
vcoubard	1132:692ddf04fc42	100	* independent of the transport. If you are returned a reason that is not
vcoubard	1132:692ddf04fc42	101	* covered by this enumeration, please refer to the underlying
vcoubard	1132:692ddf04fc42	102	* transport library.
vcoubard	1132:692ddf04fc42	103	*/
vcoubard	1132:692ddf04fc42	104	enum DisconnectionReason_t {
vcoubard	1132:692ddf04fc42	105	CONNECTION_TIMEOUT = 0x08,
vcoubard	1132:692ddf04fc42	106	REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard	1132:692ddf04fc42	107	REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /*< Remote device terminated connection due to low resources./
vcoubard	1132:692ddf04fc42	108	REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /*< Remote device terminated connection due to power off. /
vcoubard	1132:692ddf04fc42	109	LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
vcoubard	1132:692ddf04fc42	110	CONN_INTERVAL_UNACCEPTABLE = 0x3B,
vcoubard	1132:692ddf04fc42	111	};
vcoubard	1132:692ddf04fc42	112
vcoubard	1136:22aada733dbd	113	/**
vcoubard	1136:22aada733dbd	114	* Enumeration for whitelist advertising policy filter modes. The possible
vcoubard	1136:22aada733dbd	115	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1136:22aada733dbd	116	* 4.2 (Vol. 6), Part B, Section 4.3.2.
vcoubard	1136:22aada733dbd	117	*
vcoubard	1136:22aada733dbd	118	* @experimental
vcoubard	1136:22aada733dbd	119	*/
vcoubard	1136:22aada733dbd	120	enum AdvertisingPolicyMode_t {
vcoubard	1136:22aada733dbd	121	ADV_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1136:22aada733dbd	122	ADV_POLICY_FILTER_SCAN_REQS = 1,
vcoubard	1136:22aada733dbd	123	ADV_POLICY_FILTER_CONN_REQS = 2,
vcoubard	1136:22aada733dbd	124	ADV_POLICY_FILTER_ALL_REQS = 3,
vcoubard	1136:22aada733dbd	125	};
vcoubard	1136:22aada733dbd	126
vcoubard	1136:22aada733dbd	127	/**
vcoubard	1136:22aada733dbd	128	* Enumeration for whitelist scanning policy filter modes. The possible
vcoubard	1136:22aada733dbd	129	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1136:22aada733dbd	130	* 4.2 (Vol. 6), Part B, Section 4.3.3.
vcoubard	1136:22aada733dbd	131	*
vcoubard	1136:22aada733dbd	132	* @experimental
vcoubard	1136:22aada733dbd	133	*/
vcoubard	1136:22aada733dbd	134	enum ScanningPolicyMode_t {
vcoubard	1136:22aada733dbd	135	SCAN_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1136:22aada733dbd	136	SCAN_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1136:22aada733dbd	137	};
vcoubard	1136:22aada733dbd	138
vcoubard	1136:22aada733dbd	139	/**
vcoubard	1136:22aada733dbd	140	* Enumeration for the whitelist initiator policy fiter modes. The possible
vcoubard	1136:22aada733dbd	141	* filter modes were obtained from the Bluetooth Core Specification
vcoubard	1136:22aada733dbd	142	* 4.2 (vol. 6), Part B, Section 4.4.4.
vcoubard	1136:22aada733dbd	143	*
vcoubard	1136:22aada733dbd	144	* @experimental
vcoubard	1136:22aada733dbd	145	*/
vcoubard	1136:22aada733dbd	146	enum InitiatorPolicyMode_t {
vcoubard	1136:22aada733dbd	147	INIT_POLICY_IGNORE_WHITELIST = 0,
vcoubard	1136:22aada733dbd	148	INIT_POLICY_FILTER_ALL_ADV = 1,
vcoubard	1136:22aada733dbd	149	};
vcoubard	1136:22aada733dbd	150
vcoubard	1136:22aada733dbd	151	/**
vcoubard	1136:22aada733dbd	152	* Representation of a Bluetooth Low Enery Whitelist containing addresses.
vcoubard	1136:22aada733dbd	153	*
vcoubard	1136:22aada733dbd	154	* @experimental
vcoubard	1136:22aada733dbd	155	*/
vcoubard	1136:22aada733dbd	156	struct Whitelist_t {
vcoubard	1184:1589830dbdb7	157	BLEProtocol::Address_t addresses; /< List of BLE addresses in the whitelist. /
vcoubard	1184:1589830dbdb7	158	uint8_t size; /*< Total number of BLE addresses in this whitelist /
vcoubard	1184:1589830dbdb7	159	uint8_t capacity; /*< Maximum number of BLE addresses that can be added to this whitelist. /
vcoubard	1136:22aada733dbd	160	};
vcoubard	1136:22aada733dbd	161
vcoubard	1136:22aada733dbd	162
vcoubard	1184:1589830dbdb7	163	/**
vcoubard	1184:1589830dbdb7	164	* Describes the current state of the device (more than one bit can be set).
vcoubard	1184:1589830dbdb7	165	*/
vcoubard	1132:692ddf04fc42	166	struct GapState_t {
vcoubard	1132:692ddf04fc42	167	unsigned advertising : 1; /*< Peripheral is currently advertising. /
vcoubard	1132:692ddf04fc42	168	unsigned connected : 1; /*< Peripheral is connected to a central. /
vcoubard	1132:692ddf04fc42	169	};
vcoubard	1132:692ddf04fc42	170
vcoubard	1184:1589830dbdb7	171	/**
vcoubard	1184:1589830dbdb7	172	* Type for connection handle.
vcoubard	1184:1589830dbdb7	173	*/
vcoubard	1184:1589830dbdb7	174	typedef uint16_t Handle_t;
vcoubard	1132:692ddf04fc42	175
vcoubard	1184:1589830dbdb7	176	/**
vcoubard	1184:1589830dbdb7	177	* Structure containing GAP connection parameters. When in peripheral role
vcoubard	1184:1589830dbdb7	178	* the connection parameters are suggestions. The choice of the connection
vcoubard	1184:1589830dbdb7	179	* parameters is eventually up to the central.
vcoubard	1184:1589830dbdb7	180	*/
vcoubard	1132:692ddf04fc42	181	typedef struct {
vcoubard	1184:1589830dbdb7	182	uint16_t minConnectionInterval; /*< Minimum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1184:1589830dbdb7	183	uint16_t maxConnectionInterval; /*< Maximum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1184:1589830dbdb7	184	uint16_t slaveLatency; /*< Slave Latency in number of connection events, see BLE_GAP_CP_LIMITS./
vcoubard	1184:1589830dbdb7	185	uint16_t connectionSupervisionTimeout; /*< Connection Supervision Timeout in 10 ms units, see BLE_GAP_CP_LIMITS./
vcoubard	1132:692ddf04fc42	186	} ConnectionParams_t;
vcoubard	1132:692ddf04fc42	187
vcoubard	1184:1589830dbdb7	188	/**
vcoubard	1184:1589830dbdb7	189	* Enumeration for the possible GAP roles of a BLE device.
vcoubard	1184:1589830dbdb7	190	*/
vcoubard	1132:692ddf04fc42	191	enum Role_t {
vcoubard	1132:692ddf04fc42	192	PERIPHERAL = 0x1, /*< Peripheral Role. /
vcoubard	1132:692ddf04fc42	193	CENTRAL = 0x2, /*< Central Role. /
vcoubard	1132:692ddf04fc42	194	};
vcoubard	1132:692ddf04fc42	195
vcoubard	1184:1589830dbdb7	196	/**
vcoubard	1184:1589830dbdb7	197	* Structure containing data and metadata of a scanned advertising packet.
vcoubard	1184:1589830dbdb7	198	*/
vcoubard	1132:692ddf04fc42	199	struct AdvertisementCallbackParams_t {
vcoubard	1184:1589830dbdb7	200	BLEProtocol::AddressBytes_t peerAddr; /*< The peer's BLE address. /
vcoubard	1184:1589830dbdb7	201	int8_t rssi; /*< The advertisement packet RSSI value. /
vcoubard	1184:1589830dbdb7	202	bool isScanResponse; /*< Whether this packet is the response to a scan request. /
vcoubard	1184:1589830dbdb7	203	GapAdvertisingParams::AdvertisingType_t type; /*< The type of advertisement. /
vcoubard	1184:1589830dbdb7	204	uint8_t advertisingDataLen; /*< Length of the advertisement data. /
vcoubard	1184:1589830dbdb7	205	const uint8_t advertisingData; /< Pointer to the advertisement packet's data. /
vcoubard	1132:692ddf04fc42	206	};
vcoubard	1184:1589830dbdb7	207
vcoubard	1184:1589830dbdb7	208	/**
vcoubard	1184:1589830dbdb7	209	* Type for the handlers of advertisement callback events. Refer to
vcoubard	1184:1589830dbdb7	210	* Gap::startScan().
vcoubard	1184:1589830dbdb7	211	*/
vcoubard	1132:692ddf04fc42	212	typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
vcoubard	1132:692ddf04fc42	213
vcoubard	1184:1589830dbdb7	214	/**
vcoubard	1184:1589830dbdb7	215	* Encapsulates the parameters of a connection. This information is passed
vcoubard	1184:1589830dbdb7	216	* to the registered handler of connection events. Refer to Gap::onConnection().
vcoubard	1184:1589830dbdb7	217	*/
vcoubard	1132:692ddf04fc42	218	struct ConnectionCallbackParams_t {
vcoubard	1184:1589830dbdb7	219	Handle_t handle; /*< The ID for this connection /
vcoubard	1184:1589830dbdb7	220	Role_t role; /*< This device's role in the connection /
vcoubard	1184:1589830dbdb7	221	BLEProtocol::AddressType_t peerAddrType; /*< The peer's BLE address type /
vcoubard	1184:1589830dbdb7	222	BLEProtocol::AddressBytes_t peerAddr; /*< The peer's BLE address /
vcoubard	1184:1589830dbdb7	223	BLEProtocol::AddressType_t ownAddrType; /*< This device's BLE address type /
vcoubard	1184:1589830dbdb7	224	BLEProtocol::AddressBytes_t ownAddr; /*< This devices's BLE address /
vcoubard	1184:1589830dbdb7	225	const ConnectionParams_t connectionParams; /< The currently configured connection parameters /
vcoubard	1132:692ddf04fc42	226
vcoubard	1184:1589830dbdb7	227	/**
vcoubard	1184:1589830dbdb7	228	* Constructor for ConnectionCallbackParams_t.
vcoubard	1184:1589830dbdb7	229	*
vcoubard	1184:1589830dbdb7	230	* @param[in] handleIn
vcoubard	1184:1589830dbdb7	231	* Value for ConnectionCallbackParams_t::handle
vcoubard	1184:1589830dbdb7	232	* @param[in] roleIn
vcoubard	1184:1589830dbdb7	233	* Value for ConnectionCallbackParams_t::role
vcoubard	1184:1589830dbdb7	234	* @param[in] peerAddrTypeIn
vcoubard	1184:1589830dbdb7	235	* Value for ConnectionCallbackParams_t::peerAddrType
vcoubard	1184:1589830dbdb7	236	* @param[in] peerAddrIn
vcoubard	1184:1589830dbdb7	237	* Value for ConnectionCallbackParams_t::peerAddr
vcoubard	1184:1589830dbdb7	238	* @param[in] ownAddrTypeIn
vcoubard	1184:1589830dbdb7	239	* Value for ConnectionCallbackParams_t::ownAddrType
vcoubard	1184:1589830dbdb7	240	* @param[in] ownAddrIn
vcoubard	1184:1589830dbdb7	241	* Value for ConnectionCallbackParams_t::ownAddr
vcoubard	1184:1589830dbdb7	242	* @param[in] connectionParamsIn
vcoubard	1184:1589830dbdb7	243	* Value for ConnectionCallbackParams_t::connectionParams
vcoubard	1184:1589830dbdb7	244	*/
vcoubard	1136:22aada733dbd	245	ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard	1136:22aada733dbd	246	Role_t roleIn,
vcoubard	1136:22aada733dbd	247	BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard	1136:22aada733dbd	248	const uint8_t *peerAddrIn,
vcoubard	1136:22aada733dbd	249	BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard	1136:22aada733dbd	250	const uint8_t *ownAddrIn,
vcoubard	1136:22aada733dbd	251	const ConnectionParams_t *connectionParamsIn) :
vcoubard	1132:692ddf04fc42	252	handle(handleIn),
vcoubard	1132:692ddf04fc42	253	role(roleIn),
vcoubard	1132:692ddf04fc42	254	peerAddrType(peerAddrTypeIn),
vcoubard	1132:692ddf04fc42	255	peerAddr(),
vcoubard	1132:692ddf04fc42	256	ownAddrType(ownAddrTypeIn),
vcoubard	1132:692ddf04fc42	257	ownAddr(),
vcoubard	1132:692ddf04fc42	258	connectionParams(connectionParamsIn) {
vcoubard	1132:692ddf04fc42	259	memcpy(peerAddr, peerAddrIn, ADDR_LEN);
vcoubard	1132:692ddf04fc42	260	memcpy(ownAddr, ownAddrIn, ADDR_LEN);
vcoubard	1132:692ddf04fc42	261	}
vcoubard	1132:692ddf04fc42	262	};
vcoubard	1132:692ddf04fc42	263
vcoubard	1184:1589830dbdb7	264	/**
vcoubard	1184:1589830dbdb7	265	* Structure that encapsulates information about a disconnection event.
vcoubard	1184:1589830dbdb7	266	* Refer to Gap::onDisconnection().
vcoubard	1184:1589830dbdb7	267	*/
vcoubard	1132:692ddf04fc42	268	struct DisconnectionCallbackParams_t {
vcoubard	1184:1589830dbdb7	269	Handle_t handle; /*< The ID of the connection that caused the disconnection event /
vcoubard	1184:1589830dbdb7	270	DisconnectionReason_t reason; /*< The reason of the disconnection event /
vcoubard	1132:692ddf04fc42	271
vcoubard	1184:1589830dbdb7	272	/**
vcoubard	1184:1589830dbdb7	273	* Constructor for DisconnectionCallbackParams_t.
vcoubard	1184:1589830dbdb7	274	*
vcoubard	1184:1589830dbdb7	275	* @param[in] handleIn
vcoubard	1184:1589830dbdb7	276	* Value for DisconnectionCallbackParams_t::handle.
vcoubard	1184:1589830dbdb7	277	* @param[in] reasonIn
vcoubard	1184:1589830dbdb7	278	* Value for DisconnectionCallbackParams_t::reason.
vcoubard	1184:1589830dbdb7	279	*/
vcoubard	1132:692ddf04fc42	280	DisconnectionCallbackParams_t(Handle_t handleIn,
vcoubard	1132:692ddf04fc42	281	DisconnectionReason_t reasonIn) :
vcoubard	1132:692ddf04fc42	282	handle(handleIn),
vcoubard	1132:692ddf04fc42	283	reason(reasonIn)
vcoubard	1132:692ddf04fc42	284	{}
vcoubard	1132:692ddf04fc42	285	};
vcoubard	1132:692ddf04fc42	286
vcoubard	1132:692ddf04fc42	287	static const uint16_t UNIT_1_25_MS = 1250; /*< Number of microseconds in 1.25 milliseconds. /
vcoubard	1184:1589830dbdb7	288	/**
vcoubard	1184:1589830dbdb7	289	* Helper function to convert from units of milliseconds to GAP duration
vcoubard	1184:1589830dbdb7	290	* units.
vcoubard	1184:1589830dbdb7	291	*
vcoubard	1184:1589830dbdb7	292	* @param[in] durationInMillis
vcoubard	1184:1589830dbdb7	293	* The duration in milliseconds.
vcoubard	1184:1589830dbdb7	294	*
vcoubard	1184:1589830dbdb7	295	* @return The duration in GAP duration units.
vcoubard	1184:1589830dbdb7	296	*/
vcoubard	1132:692ddf04fc42	297	static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
vcoubard	1132:692ddf04fc42	298	return (durationInMillis * 1000) / UNIT_1_25_MS;
vcoubard	1132:692ddf04fc42	299	}
vcoubard	1132:692ddf04fc42	300
vcoubard	1184:1589830dbdb7	301	/**
vcoubard	1184:1589830dbdb7	302	* Type for the registered callbacks added to the timeout event callchain.
vcoubard	1184:1589830dbdb7	303	* Refer to Gap::onTimeout().
vcoubard	1184:1589830dbdb7	304	*/
vcoubard	1132:692ddf04fc42	305	typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard	1184:1589830dbdb7	306	/**
vcoubard	1184:1589830dbdb7	307	* Type for the timeout event callchain. Refer to Gap::onTimeout().
vcoubard	1184:1589830dbdb7	308	*/
vcoubard	1132:692ddf04fc42	309	typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
vcoubard	1132:692ddf04fc42	310
vcoubard	1184:1589830dbdb7	311	/**
vcoubard	1184:1589830dbdb7	312	* Type for the registered callbacks added to the connection event
vcoubard	1184:1589830dbdb7	313	* callchain. Refer to Gap::onConnection().
vcoubard	1184:1589830dbdb7	314	*/
vcoubard	1132:692ddf04fc42	315	typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard	1184:1589830dbdb7	316	/**
vcoubard	1184:1589830dbdb7	317	* Type for the connection event callchain. Refer to Gap::onConnection().
vcoubard	1184:1589830dbdb7	318	*/
vcoubard	1132:692ddf04fc42	319	typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard	1132:692ddf04fc42	320
vcoubard	1184:1589830dbdb7	321	/**
vcoubard	1184:1589830dbdb7	322	* Type for the registered callbacks added to the disconnection event
vcoubard	1184:1589830dbdb7	323	* callchain. Refer to Gap::onDisconnetion().
vcoubard	1184:1589830dbdb7	324	*/
vcoubard	1132:692ddf04fc42	325	typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard	1184:1589830dbdb7	326	/**
vcoubard	1184:1589830dbdb7	327	* Type for the disconnection event callchain. Refer to Gap::onDisconnection().
vcoubard	1184:1589830dbdb7	328	*/
vcoubard	1133:6362b7c2fdff	329	typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard	1132:692ddf04fc42	330
vcoubard	1184:1589830dbdb7	331	/**
vcoubard	1184:1589830dbdb7	332	* Type for the handlers of radio notification callback events. Refer to
vcoubard	1184:1589830dbdb7	333	* Gap::onRadioNotification().
vcoubard	1184:1589830dbdb7	334	*/
vcoubard	1132:692ddf04fc42	335	typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
vcoubard	1132:692ddf04fc42	336
vcoubard	1184:1589830dbdb7	337	/**
vcoubard	1184:1589830dbdb7	338	* Type for the handlers of shutdown callback events. Refer to
vcoubard	1184:1589830dbdb7	339	* Gap::onShutdown().
vcoubard	1184:1589830dbdb7	340	*/
vcoubard	1136:22aada733dbd	341	typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard	1184:1589830dbdb7	342	/**
vcoubard	1184:1589830dbdb7	343	* Type for the shutdown event callchain. Refer to Gap::onShutdown().
vcoubard	1184:1589830dbdb7	344	*/
vcoubard	1136:22aada733dbd	345	typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard	1136:22aada733dbd	346
vcoubard	1132:692ddf04fc42	347	/*
vcoubard	1132:692ddf04fc42	348	* The following functions are meant to be overridden in the platform-specific sub-class.
vcoubard	1132:692ddf04fc42	349	*/
vcoubard	1132:692ddf04fc42	350	public:
vcoubard	1132:692ddf04fc42	351	/**
vcoubard	1132:692ddf04fc42	352	* Set the BTLE MAC address and type. Please note that the address format is
vcoubard	1136:22aada733dbd	353	* least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
vcoubard	1132:692ddf04fc42	354	*
vcoubard	1184:1589830dbdb7	355	* @param[in] type
vcoubard	1184:1589830dbdb7	356	* The type of the BLE address to set.
vcoubard	1184:1589830dbdb7	357	* @param[in] address
vcoubard	1184:1589830dbdb7	358	* The BLE address to set.
vcoubard	1184:1589830dbdb7	359	*
vcoubard	1132:692ddf04fc42	360	* @return BLE_ERROR_NONE on success.
vcoubard	1132:692ddf04fc42	361	*/
vcoubard	1136:22aada733dbd	362	virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard	1132:692ddf04fc42	363	/* avoid compiler warnings about unused variables */
vcoubard	1132:692ddf04fc42	364	(void)type;
vcoubard	1132:692ddf04fc42	365	(void)address;
vcoubard	1132:692ddf04fc42	366
vcoubard	1132:692ddf04fc42	367	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	368	}
vcoubard	1132:692ddf04fc42	369
vcoubard	1132:692ddf04fc42	370	/**
vcoubard	1132:692ddf04fc42	371	* Fetch the BTLE MAC address and type.
vcoubard	1132:692ddf04fc42	372	*
vcoubard	1184:1589830dbdb7	373	* @param[out] typeP
vcoubard	1184:1589830dbdb7	374	* The current BLE address type.
vcoubard	1184:1589830dbdb7	375	* @param[out] address
vcoubard	1184:1589830dbdb7	376	* The current BLE address.
vcoubard	1184:1589830dbdb7	377	*
vcoubard	1132:692ddf04fc42	378	* @return BLE_ERROR_NONE on success.
vcoubard	1132:692ddf04fc42	379	*/
vcoubard	1136:22aada733dbd	380	virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard	1132:692ddf04fc42	381	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	382	(void)typeP;
vcoubard	1132:692ddf04fc42	383	(void)address;
vcoubard	1132:692ddf04fc42	384
vcoubard	1132:692ddf04fc42	385	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	386	}
vcoubard	1132:692ddf04fc42	387
vcoubard	1132:692ddf04fc42	388	/**
vcoubard	1184:1589830dbdb7	389	* Get the minimum advertising interval in milliseconds for connectable
vcoubard	1184:1589830dbdb7	390	* undirected and connectable directed event types supported by the
vcoubard	1184:1589830dbdb7	391	* underlying BLE stack.
vcoubard	1184:1589830dbdb7	392	*
vcoubard	1135:d540a48f650d	393	* @return Minimum Advertising interval in milliseconds for connectable
vcoubard	1184:1589830dbdb7	394	* undirected and connectable directed event types.
vcoubard	1132:692ddf04fc42	395	*/
vcoubard	1132:692ddf04fc42	396	virtual uint16_t getMinAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	397	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	398	}
vcoubard	1132:692ddf04fc42	399
vcoubard	1132:692ddf04fc42	400	/**
vcoubard	1184:1589830dbdb7	401	* Get the minimum advertising interval in milliseconds for scannable
vcoubard	1184:1589830dbdb7	402	* undirected and non-connectable undirected even types supported by the
vcoubard	1184:1589830dbdb7	403	* underlying BLE stack.
vcoubard	1184:1589830dbdb7	404	*
vcoubard	1135:d540a48f650d	405	* @return Minimum Advertising interval in milliseconds for scannable
vcoubard	1184:1589830dbdb7	406	* undirected and non-connectable undirected event types.
vcoubard	1132:692ddf04fc42	407	*/
vcoubard	1132:692ddf04fc42	408	virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	409	return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	410	}
vcoubard	1132:692ddf04fc42	411
vcoubard	1132:692ddf04fc42	412	/**
vcoubard	1184:1589830dbdb7	413	* Get the maximum advertising interval in milliseconds for all event types
vcoubard	1184:1589830dbdb7	414	* supported by the underlying BLE stack.
vcoubard	1184:1589830dbdb7	415	*
vcoubard	1132:692ddf04fc42	416	* @return Maximum Advertising interval in milliseconds.
vcoubard	1132:692ddf04fc42	417	*/
vcoubard	1132:692ddf04fc42	418	virtual uint16_t getMaxAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	419	return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	420	}
vcoubard	1132:692ddf04fc42	421
vcoubard	1184:1589830dbdb7	422	/**
vcoubard	1184:1589830dbdb7	423	* Stop advertising. The current advertising parameters remain in effect.
vcoubard	1184:1589830dbdb7	424	*
vcoubard	1184:1589830dbdb7	425	* @retval BLE_ERROR_NONE if successfully stopped advertising procedure.
vcoubard	1184:1589830dbdb7	426	*/
vcoubard	1132:692ddf04fc42	427	virtual ble_error_t stopAdvertising(void) {
vcoubard	1132:692ddf04fc42	428	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	429	}
vcoubard	1132:692ddf04fc42	430
vcoubard	1132:692ddf04fc42	431	/**
vcoubard	1132:692ddf04fc42	432	* Stop scanning. The current scanning parameters remain in effect.
vcoubard	1132:692ddf04fc42	433	*
vcoubard	1132:692ddf04fc42	434	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard	1132:692ddf04fc42	435	*/
vcoubard	1132:692ddf04fc42	436	virtual ble_error_t stopScan() {
vcoubard	1132:692ddf04fc42	437	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	438	}
vcoubard	1132:692ddf04fc42	439
vcoubard	1132:692ddf04fc42	440	/**
vcoubard	1132:692ddf04fc42	441	* Create a connection (GAP Link Establishment).
vcoubard	1132:692ddf04fc42	442	*
vcoubard	1184:1589830dbdb7	443	* @param[in] peerAddr
vcoubard	1184:1589830dbdb7	444	* 48-bit address, LSB format.
vcoubard	1184:1589830dbdb7	445	* @param[in] peerAddrType
vcoubard	1184:1589830dbdb7	446	* Address type of the peer.
vcoubard	1184:1589830dbdb7	447	* @param[in] connectionParams
vcoubard	1184:1589830dbdb7	448	* Connection parameters.
vcoubard	1184:1589830dbdb7	449	* @param[in] scanParams
vcoubard	1184:1589830dbdb7	450	* Paramters to be used while scanning for the peer.
vcoubard	1184:1589830dbdb7	451	*
vcoubard	1132:692ddf04fc42	452	* @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard	1184:1589830dbdb7	453	* successfully. The connectionCallChain (if set) will be invoked upon
vcoubard	1184:1589830dbdb7	454	* a connection event.
vcoubard	1132:692ddf04fc42	455	*/
vcoubard	1136:22aada733dbd	456	virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1136:22aada733dbd	457	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1136:22aada733dbd	458	const ConnectionParams_t *connectionParams,
vcoubard	1136:22aada733dbd	459	const GapScanningParams *scanParams) {
vcoubard	1132:692ddf04fc42	460	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	461	(void)peerAddr;
vcoubard	1132:692ddf04fc42	462	(void)peerAddrType;
vcoubard	1132:692ddf04fc42	463	(void)connectionParams;
vcoubard	1132:692ddf04fc42	464	(void)scanParams;
vcoubard	1132:692ddf04fc42	465
vcoubard	1132:692ddf04fc42	466	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	467	}
vcoubard	1132:692ddf04fc42	468
vcoubard	1132:692ddf04fc42	469	/**
vcoubard	1136:22aada733dbd	470	* Create a connection (GAP Link Establishment).
vcoubard	1136:22aada733dbd	471	*
vcoubard	1184:1589830dbdb7	472	* @deprecated This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
vcoubard	1184:1589830dbdb7	473	* BLEProtocol::AddressType_t peerAddrType,
vcoubard	1184:1589830dbdb7	474	* const ConnectionParams_t *connectionParams,
vcoubard	1184:1589830dbdb7	475	* const GapScanningParams *scanParams)
vcoubard	1184:1589830dbdb7	476	* to maintain backward compatibility for change from Gap::AddressType_t to
vcoubard	1184:1589830dbdb7	477	* BLEProtocol::AddressType_t.
vcoubard	1136:22aada733dbd	478	*/
vcoubard	1136:22aada733dbd	479	ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1136:22aada733dbd	480	DeprecatedAddressType_t peerAddrType,
vcoubard	1136:22aada733dbd	481	const ConnectionParams_t *connectionParams,
vcoubard	1136:22aada733dbd	482	const GapScanningParams *scanParams)
vcoubard	1136:22aada733dbd	483	__deprecated_message("Gap::DeprecatedAddressType_t is deprecated, use BLEProtocol::AddressType_t instead") {
vcoubard	1136:22aada733dbd	484	return connect(peerAddr, (BLEProtocol::AddressType_t) peerAddrType, connectionParams, scanParams);
vcoubard	1136:22aada733dbd	485	}
vcoubard	1136:22aada733dbd	486
vcoubard	1136:22aada733dbd	487	/**
vcoubard	1132:692ddf04fc42	488	* This call initiates the disconnection procedure, and its completion will
vcoubard	1132:692ddf04fc42	489	* be communicated to the application with an invocation of the
vcoubard	1132:692ddf04fc42	490	* disconnectionCallback.
vcoubard	1132:692ddf04fc42	491	*
vcoubard	1184:1589830dbdb7	492	* @param[in] reason
vcoubard	1184:1589830dbdb7	493	* The reason for disconnection; to be sent back to the peer.
vcoubard	1184:1589830dbdb7	494	* @param[in] connectionHandle
vcoubard	1184:1589830dbdb7	495	* The handle of the connection to disconnect from.
vcoubard	1184:1589830dbdb7	496	*
vcoubard	1184:1589830dbdb7	497	* @return BLE_ERROR_NONE if disconnection was successful.
vcoubard	1132:692ddf04fc42	498	*/
vcoubard	1132:692ddf04fc42	499	virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
vcoubard	1132:692ddf04fc42	500	/* avoid compiler warnings about unused variables */
vcoubard	1132:692ddf04fc42	501	(void)connectionHandle;
vcoubard	1132:692ddf04fc42	502	(void)reason;
vcoubard	1132:692ddf04fc42	503
vcoubard	1132:692ddf04fc42	504	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	505	}
vcoubard	1132:692ddf04fc42	506
vcoubard	1132:692ddf04fc42	507	/**
vcoubard	1132:692ddf04fc42	508	* This call initiates the disconnection procedure, and its completion will
vcoubard	1132:692ddf04fc42	509	* be communicated to the application with an invocation of the
vcoubard	1132:692ddf04fc42	510	* disconnectionCallback.
vcoubard	1132:692ddf04fc42	511	*
vcoubard	1184:1589830dbdb7	512	* @param[in] reason
vcoubard	1184:1589830dbdb7	513	* The reason for disconnection; to be sent back to the peer.
vcoubard	1184:1589830dbdb7	514	*
vcoubard	1184:1589830dbdb7	515	* @return BLE_ERROR_NONE if disconnection was successful.
vcoubard	1132:692ddf04fc42	516	*
vcoubard	1184:1589830dbdb7	517	* @deprecated This version of disconnect() doesn't take a connection handle. It
vcoubard	1184:1589830dbdb7	518	* works reliably only for stacks that are limited to a single
vcoubard	1184:1589830dbdb7	519	* connection. Use instead Gap::disconnect(Handle_t connectionHandle,
vcoubard	1184:1589830dbdb7	520	* DisconnectionReason_t reason) instead.
vcoubard	1132:692ddf04fc42	521	*/
vcoubard	1132:692ddf04fc42	522	virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard	1132:692ddf04fc42	523	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	524	(void)reason;
vcoubard	1132:692ddf04fc42	525
vcoubard	1132:692ddf04fc42	526	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	527	}
vcoubard	1132:692ddf04fc42	528
vcoubard	1132:692ddf04fc42	529	/**
vcoubard	1132:692ddf04fc42	530	* Get the GAP peripheral preferred connection parameters. These are the
vcoubard	1132:692ddf04fc42	531	* defaults that the peripheral would like to have in a connection. The
vcoubard	1132:692ddf04fc42	532	* choice of the connection parameters is eventually up to the central.
vcoubard	1132:692ddf04fc42	533	*
vcoubard	1132:692ddf04fc42	534	* @param[out] params
vcoubard	1132:692ddf04fc42	535	* The structure where the parameters will be stored. Memory
vcoubard	1132:692ddf04fc42	536	* for this is owned by the caller.
vcoubard	1132:692ddf04fc42	537	*
vcoubard	1132:692ddf04fc42	538	* @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard	1184:1589830dbdb7	539	* the given structure pointed to by params.
vcoubard	1132:692ddf04fc42	540	*/
vcoubard	1132:692ddf04fc42	541	virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	542	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	543	(void)params;
vcoubard	1132:692ddf04fc42	544
vcoubard	1132:692ddf04fc42	545	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	546	}
vcoubard	1132:692ddf04fc42	547
vcoubard	1132:692ddf04fc42	548	/**
vcoubard	1132:692ddf04fc42	549	* Set the GAP peripheral preferred connection parameters. These are the
vcoubard	1132:692ddf04fc42	550	* defaults that the peripheral would like to have in a connection. The
vcoubard	1132:692ddf04fc42	551	* choice of the connection parameters is eventually up to the central.
vcoubard	1132:692ddf04fc42	552	*
vcoubard	1132:692ddf04fc42	553	* @param[in] params
vcoubard	1132:692ddf04fc42	554	* The structure containing the desired parameters.
vcoubard	1184:1589830dbdb7	555	*
vcoubard	1184:1589830dbdb7	556	* @return BLE_ERROR_NONE if the preferred connection params were set
vcoubard	1184:1589830dbdb7	557	* correctly.
vcoubard	1132:692ddf04fc42	558	*/
vcoubard	1132:692ddf04fc42	559	virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	560	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	561	(void)params;
vcoubard	1132:692ddf04fc42	562
vcoubard	1132:692ddf04fc42	563	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	564	}
vcoubard	1132:692ddf04fc42	565
vcoubard	1132:692ddf04fc42	566	/**
vcoubard	1184:1589830dbdb7	567	* Update connection parameters. In the central role this will initiate a
vcoubard	1184:1589830dbdb7	568	* Link Layer connection parameter update procedure. In the peripheral role,
vcoubard	1184:1589830dbdb7	569	* this will send the corresponding L2CAP request and wait for the central
vcoubard	1184:1589830dbdb7	570	* to perform the procedure.
vcoubard	1132:692ddf04fc42	571	*
vcoubard	1132:692ddf04fc42	572	* @param[in] handle
vcoubard	1132:692ddf04fc42	573	* Connection Handle.
vcoubard	1132:692ddf04fc42	574	* @param[in] params
vcoubard	1132:692ddf04fc42	575	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard	1132:692ddf04fc42	576	* the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard	1184:1589830dbdb7	577	*
vcoubard	1184:1589830dbdb7	578	* @return BLE_ERROR_NONE if the connection parameters were updated correctly.
vcoubard	1132:692ddf04fc42	579	*/
vcoubard	1132:692ddf04fc42	580	virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	581	/* avoid compiler warnings about unused variables */
vcoubard	1132:692ddf04fc42	582	(void)handle;
vcoubard	1132:692ddf04fc42	583	(void)params;
vcoubard	1132:692ddf04fc42	584
vcoubard	1132:692ddf04fc42	585	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	586	}
vcoubard	1132:692ddf04fc42	587
vcoubard	1132:692ddf04fc42	588	/**
vcoubard	1132:692ddf04fc42	589	* Set the device name characteristic in the GAP service.
vcoubard	1184:1589830dbdb7	590	*
vcoubard	1132:692ddf04fc42	591	* @param[in] deviceName
vcoubard	1132:692ddf04fc42	592	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard	1184:1589830dbdb7	593	*
vcoubard	1184:1589830dbdb7	594	* @return BLE_ERROR_NONE if the device name was set correctly.
vcoubard	1132:692ddf04fc42	595	*/
vcoubard	1132:692ddf04fc42	596	virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard	1132:692ddf04fc42	597	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	598	(void)deviceName;
vcoubard	1132:692ddf04fc42	599
vcoubard	1132:692ddf04fc42	600	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	601	}
vcoubard	1132:692ddf04fc42	602
vcoubard	1132:692ddf04fc42	603	/**
vcoubard	1132:692ddf04fc42	604	* Get the value of the device name characteristic in the GAP service.
vcoubard	1184:1589830dbdb7	605	*
vcoubard	1132:692ddf04fc42	606	* @param[out] deviceName
vcoubard	1132:692ddf04fc42	607	* Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard	1132:692ddf04fc42	608	* terminated* string will be placed. Set this
vcoubard	1132:692ddf04fc42	609	* value to NULL in order to obtain the deviceName-length
vcoubard	1132:692ddf04fc42	610	* from the 'length' parameter.
vcoubard	1132:692ddf04fc42	611	*
vcoubard	1184:1589830dbdb7	612	* @param[in,out] lengthP
vcoubard	1132:692ddf04fc42	613	* (on input) Length of the buffer pointed to by deviceName;
vcoubard	1132:692ddf04fc42	614	* (on output) the complete device name length (without the
vcoubard	1132:692ddf04fc42	615	* null terminator).
vcoubard	1132:692ddf04fc42	616	*
vcoubard	1184:1589830dbdb7	617	* @return BLE_ERROR_NONE if the device name was fetched correctly from the
vcoubard	1184:1589830dbdb7	618	* underlying BLE stack.
vcoubard	1184:1589830dbdb7	619	*
vcoubard	1132:692ddf04fc42	620	* @note If the device name is longer than the size of the supplied buffer,
vcoubard	1184:1589830dbdb7	621	* length will return the complete device name length, and not the
vcoubard	1184:1589830dbdb7	622	* number of bytes actually returned in deviceName. The application may
vcoubard	1184:1589830dbdb7	623	* use this information to retry with a suitable buffer size.
vcoubard	1132:692ddf04fc42	624	*/
vcoubard	1132:692ddf04fc42	625	virtual ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
vcoubard	1132:692ddf04fc42	626	/* avoid compiler warnings about unused variables */
vcoubard	1132:692ddf04fc42	627	(void)deviceName;
vcoubard	1132:692ddf04fc42	628	(void)lengthP;
vcoubard	1132:692ddf04fc42	629
vcoubard	1132:692ddf04fc42	630	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	631	}
vcoubard	1132:692ddf04fc42	632
vcoubard	1132:692ddf04fc42	633	/**
vcoubard	1132:692ddf04fc42	634	* Set the appearance characteristic in the GAP service.
vcoubard	1184:1589830dbdb7	635	*
vcoubard	1132:692ddf04fc42	636	* @param[in] appearance
vcoubard	1132:692ddf04fc42	637	* The new value for the device-appearance.
vcoubard	1184:1589830dbdb7	638	*
vcoubard	1184:1589830dbdb7	639	* @return BLE_ERROR_NONE if the new appearance was set correctly.
vcoubard	1132:692ddf04fc42	640	*/
vcoubard	1132:692ddf04fc42	641	virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard	1132:692ddf04fc42	642	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	643	(void)appearance;
vcoubard	1132:692ddf04fc42	644
vcoubard	1132:692ddf04fc42	645	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	646	}
vcoubard	1132:692ddf04fc42	647
vcoubard	1132:692ddf04fc42	648	/**
vcoubard	1132:692ddf04fc42	649	* Get the appearance characteristic in the GAP service.
vcoubard	1184:1589830dbdb7	650	*
vcoubard	1132:692ddf04fc42	651	* @param[out] appearance
vcoubard	1184:1589830dbdb7	652	* The current device-appearance value.
vcoubard	1184:1589830dbdb7	653	*
vcoubard	1184:1589830dbdb7	654	* @return BLE_ERROR_NONE if the device-appearance was fetched correctly
vcoubard	1184:1589830dbdb7	655	* from the underlying BLE stack.
vcoubard	1132:692ddf04fc42	656	*/
vcoubard	1132:692ddf04fc42	657	virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard	1132:692ddf04fc42	658	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	659	(void)appearanceP;
vcoubard	1132:692ddf04fc42	660
vcoubard	1132:692ddf04fc42	661	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	662	}
vcoubard	1132:692ddf04fc42	663
vcoubard	1132:692ddf04fc42	664	/**
vcoubard	1132:692ddf04fc42	665	* Set the radio's transmit power.
vcoubard	1184:1589830dbdb7	666	*
vcoubard	1184:1589830dbdb7	667	* @param[in] txPower
vcoubard	1184:1589830dbdb7	668	* Radio's transmit power in dBm.
vcoubard	1184:1589830dbdb7	669	*
vcoubard	1184:1589830dbdb7	670	* @return BLE_ERROR_NONE if the new radio's transmit power was set
vcoubard	1184:1589830dbdb7	671	* correctly.
vcoubard	1132:692ddf04fc42	672	*/
vcoubard	1132:692ddf04fc42	673	virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard	1132:692ddf04fc42	674	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	675	(void)txPower;
vcoubard	1132:692ddf04fc42	676
vcoubard	1132:692ddf04fc42	677	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	678	}
vcoubard	1132:692ddf04fc42	679
vcoubard	1132:692ddf04fc42	680	/**
vcoubard	1132:692ddf04fc42	681	* Query the underlying stack for permitted arguments for setTxPower().
vcoubard	1132:692ddf04fc42	682	*
vcoubard	1132:692ddf04fc42	683	* @param[out] valueArrayPP
vcoubard	1132:692ddf04fc42	684	* Out parameter to receive the immutable array of Tx values.
vcoubard	1132:692ddf04fc42	685	* @param[out] countP
vcoubard	1132:692ddf04fc42	686	* Out parameter to receive the array's size.
vcoubard	1132:692ddf04fc42	687	*/
vcoubard	1132:692ddf04fc42	688	virtual void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
vcoubard	1132:692ddf04fc42	689	/* Avoid compiler warnings about unused variables. */
vcoubard	1132:692ddf04fc42	690	(void)valueArrayPP;
vcoubard	1132:692ddf04fc42	691	(void)countP;
vcoubard	1132:692ddf04fc42	692
vcoubard	1132:692ddf04fc42	693	countP = 0; / Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	694	}
vcoubard	1132:692ddf04fc42	695
vcoubard	1136:22aada733dbd	696	/**
vcoubard	1184:1589830dbdb7	697	* Get the maximum size of the whitelist.
vcoubard	1184:1589830dbdb7	698	*
vcoubard	1136:22aada733dbd	699	* @return Maximum size of the whitelist.
vcoubard	1136:22aada733dbd	700	*
vcoubard	1184:1589830dbdb7	701	* @note If using mbed OS the size of the whitelist can be configured by
vcoubard	1184:1589830dbdb7	702	* setting the YOTTA_CFG_WHITELIST_MAX_SIZE macro in your yotta
vcoubard	1184:1589830dbdb7	703	* config file.
vcoubard	1184:1589830dbdb7	704	*
vcoubard	1136:22aada733dbd	705	* @experimental
vcoubard	1136:22aada733dbd	706	*/
vcoubard	1136:22aada733dbd	707	virtual uint8_t getMaxWhitelistSize(void) const
vcoubard	1136:22aada733dbd	708	{
vcoubard	1136:22aada733dbd	709	return 0;
vcoubard	1136:22aada733dbd	710	}
vcoubard	1136:22aada733dbd	711
vcoubard	1136:22aada733dbd	712	/**
vcoubard	1136:22aada733dbd	713	* Get the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1136:22aada733dbd	714	* advertising or initiating a connection depending on the filter policies.
vcoubard	1136:22aada733dbd	715	*
vcoubard	1184:1589830dbdb7	716	* @param[in,out] whitelist
vcoubard	1136:22aada733dbd	717	* (on input) whitelist.capacity contains the maximum number
vcoubard	1136:22aada733dbd	718	* of addresses to be returned.
vcoubard	1136:22aada733dbd	719	* (on output) The populated whitelist with copies of the
vcoubard	1136:22aada733dbd	720	* addresses in the implementation's whitelist.
vcoubard	1136:22aada733dbd	721	*
vcoubard	1136:22aada733dbd	722	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1136:22aada733dbd	723	* copied into the supplied reference.
vcoubard	1136:22aada733dbd	724	*
vcoubard	1136:22aada733dbd	725	* @experimental
vcoubard	1136:22aada733dbd	726	*/
vcoubard	1136:22aada733dbd	727	virtual ble_error_t getWhitelist(Whitelist_t &whitelist) const
vcoubard	1136:22aada733dbd	728	{
vcoubard	1136:22aada733dbd	729	(void) whitelist;
vcoubard	1136:22aada733dbd	730	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1136:22aada733dbd	731	}
vcoubard	1136:22aada733dbd	732
vcoubard	1136:22aada733dbd	733	/**
vcoubard	1136:22aada733dbd	734	* Set the internal whitelist to be used by the Link Layer when scanning,
vcoubard	1136:22aada733dbd	735	* advertising or initiating a connection depending on the filter policies.
vcoubard	1136:22aada733dbd	736	*
vcoubard	1136:22aada733dbd	737	* @param[in] whitelist
vcoubard	1136:22aada733dbd	738	* A reference to a whitelist containing the addresses to
vcoubard	1136:22aada733dbd	739	* be added to the internal whitelist.
vcoubard	1136:22aada733dbd	740	*
vcoubard	1136:22aada733dbd	741	* @return BLE_ERROR_NONE if the implementation's whitelist was successfully
vcoubard	1136:22aada733dbd	742	* populated with the addresses in the given whitelist.
vcoubard	1136:22aada733dbd	743	*
vcoubard	1136:22aada733dbd	744	* @note The whitelist must not contain addresses of type @ref
vcoubard	1136:22aada733dbd	745	* BLEProtocol::AddressType_t::RANDOM_PRIVATE_NON_RESOLVABLE, this
vcoubard	1136:22aada733dbd	746	* this will result in a @ref BLE_ERROR_INVALID_PARAM since the
vcoubard	1136:22aada733dbd	747	* remote peer might change its private address at any time and it
vcoubard	1136:22aada733dbd	748	* is not possible to resolve it.
vcoubard	1136:22aada733dbd	749	* @note If the input whitelist is larger than @ref getMaxWhitelistSize()
vcoubard	1136:22aada733dbd	750	* the @ref BLE_ERROR_PARAM_OUT_OF_RANGE is returned.
vcoubard	1136:22aada733dbd	751	*
vcoubard	1136:22aada733dbd	752	* @experimental
vcoubard	1136:22aada733dbd	753	*/
vcoubard	1136:22aada733dbd	754	virtual ble_error_t setWhitelist(const Whitelist_t &whitelist)
vcoubard	1136:22aada733dbd	755	{
vcoubard	1136:22aada733dbd	756	(void) whitelist;
vcoubard	1136:22aada733dbd	757	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1136:22aada733dbd	758	}
vcoubard	1136:22aada733dbd	759
vcoubard	1136:22aada733dbd	760	/**
vcoubard	1136:22aada733dbd	761	* Set the advertising policy filter mode to be used in the next call
vcoubard	1136:22aada733dbd	762	* to startAdvertising().
vcoubard	1136:22aada733dbd	763	*
vcoubard	1136:22aada733dbd	764	* @param[in] mode
vcoubard	1136:22aada733dbd	765	* The new advertising policy filter mode.
vcoubard	1136:22aada733dbd	766	*
vcoubard	1136:22aada733dbd	767	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1136:22aada733dbd	768	* successfully.
vcoubard	1136:22aada733dbd	769	*
vcoubard	1136:22aada733dbd	770	* @experimental
vcoubard	1136:22aada733dbd	771	*/
vcoubard	1136:22aada733dbd	772	virtual ble_error_t setAdvertisingPolicyMode(AdvertisingPolicyMode_t mode)
vcoubard	1136:22aada733dbd	773	{
vcoubard	1136:22aada733dbd	774	(void) mode;
vcoubard	1136:22aada733dbd	775	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1136:22aada733dbd	776	}
vcoubard	1136:22aada733dbd	777
vcoubard	1136:22aada733dbd	778	/**
vcoubard	1136:22aada733dbd	779	* Set the scan policy filter mode to be used in the next call
vcoubard	1136:22aada733dbd	780	* to startScan().
vcoubard	1136:22aada733dbd	781	*
vcoubard	1136:22aada733dbd	782	* @param[in] mode
vcoubard	1136:22aada733dbd	783	* The new scan policy filter mode.
vcoubard	1136:22aada733dbd	784	*
vcoubard	1136:22aada733dbd	785	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1136:22aada733dbd	786	* successfully.
vcoubard	1136:22aada733dbd	787	*
vcoubard	1136:22aada733dbd	788	* @experimental
vcoubard	1136:22aada733dbd	789	*/
vcoubard	1136:22aada733dbd	790	virtual ble_error_t setScanningPolicyMode(ScanningPolicyMode_t mode)
vcoubard	1136:22aada733dbd	791	{
vcoubard	1136:22aada733dbd	792	(void) mode;
vcoubard	1136:22aada733dbd	793	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1136:22aada733dbd	794	}
vcoubard	1136:22aada733dbd	795
vcoubard	1136:22aada733dbd	796	/**
vcoubard	1136:22aada733dbd	797	* Set the initiator policy filter mode to be used.
vcoubard	1136:22aada733dbd	798	*
vcoubard	1136:22aada733dbd	799	* @param[in] mode
vcoubard	1136:22aada733dbd	800	* The new initiator policy filter mode.
vcoubard	1136:22aada733dbd	801	*
vcoubard	1136:22aada733dbd	802	* @return BLE_ERROR_NONE if the specified policy filter mode was set
vcoubard	1136:22aada733dbd	803	* successfully.
vcoubard	1136:22aada733dbd	804	*
vcoubard	1136:22aada733dbd	805	* @experimental
vcoubard	1136:22aada733dbd	806	*/
vcoubard	1136:22aada733dbd	807	virtual ble_error_t setInitiatorPolicyMode(InitiatorPolicyMode_t mode)
vcoubard	1136:22aada733dbd	808	{
vcoubard	1136:22aada733dbd	809	(void) mode;
vcoubard	1136:22aada733dbd	810	return BLE_ERROR_NOT_IMPLEMENTED;
vcoubard	1136:22aada733dbd	811	}
vcoubard	1136:22aada733dbd	812
vcoubard	1136:22aada733dbd	813	/**
vcoubard	1136:22aada733dbd	814	* Get the advertising policy filter mode that will be used in the next
vcoubard	1136:22aada733dbd	815	* call to startAdvertising().
vcoubard	1136:22aada733dbd	816	*
vcoubard	1136:22aada733dbd	817	* @return The set advertising policy filter mode.
vcoubard	1136:22aada733dbd	818	*
vcoubard	1136:22aada733dbd	819	* @experimental
vcoubard	1136:22aada733dbd	820	*/
vcoubard	1136:22aada733dbd	821	virtual AdvertisingPolicyMode_t getAdvertisingPolicyMode(void) const
vcoubard	1136:22aada733dbd	822	{
vcoubard	1136:22aada733dbd	823	return ADV_POLICY_IGNORE_WHITELIST;
vcoubard	1136:22aada733dbd	824	}
vcoubard	1136:22aada733dbd	825
vcoubard	1136:22aada733dbd	826	/**
vcoubard	1136:22aada733dbd	827	* Get the scan policy filter mode that will be used in the next
vcoubard	1136:22aada733dbd	828	* call to startScan().
vcoubard	1136:22aada733dbd	829	*
vcoubard	1136:22aada733dbd	830	* @return The set scan policy filter mode.
vcoubard	1136:22aada733dbd	831	*
vcoubard	1136:22aada733dbd	832	* @experimental
vcoubard	1136:22aada733dbd	833	*/
vcoubard	1136:22aada733dbd	834	virtual ScanningPolicyMode_t getScanningPolicyMode(void) const
vcoubard	1136:22aada733dbd	835	{
vcoubard	1136:22aada733dbd	836	return SCAN_POLICY_IGNORE_WHITELIST;
vcoubard	1136:22aada733dbd	837	}
vcoubard	1136:22aada733dbd	838
vcoubard	1136:22aada733dbd	839	/**
vcoubard	1136:22aada733dbd	840	* Get the initiator policy filter mode that will be used.
vcoubard	1136:22aada733dbd	841	*
vcoubard	1136:22aada733dbd	842	* @return The set scan policy filter mode.
vcoubard	1136:22aada733dbd	843	*
vcoubard	1136:22aada733dbd	844	* @experimental
vcoubard	1136:22aada733dbd	845	*/
vcoubard	1136:22aada733dbd	846	virtual InitiatorPolicyMode_t getInitiatorPolicyMode(void) const
vcoubard	1136:22aada733dbd	847	{
vcoubard	1136:22aada733dbd	848	return INIT_POLICY_IGNORE_WHITELIST;
vcoubard	1136:22aada733dbd	849	}
vcoubard	1136:22aada733dbd	850
vcoubard	1132:692ddf04fc42	851	protected:
vcoubard	1132:692ddf04fc42	852	/* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
vcoubard	1184:1589830dbdb7	853
vcoubard	1184:1589830dbdb7	854	/**
vcoubard	1184:1589830dbdb7	855	* Start scanning procedure in the underlying BLE stack.
vcoubard	1184:1589830dbdb7	856	*
vcoubard	1184:1589830dbdb7	857	* @param[in] scanningParams
vcoubard	1184:1589830dbdb7	858	* The GAP scanning parameters.
vcoubard	1184:1589830dbdb7	859	*
vcoubard	1184:1589830dbdb7	860	* @return BLE_ERROR_NONE if the scan procedure started successfully.
vcoubard	1184:1589830dbdb7	861	*/
vcoubard	1132:692ddf04fc42	862	virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
vcoubard	1132:692ddf04fc42	863	(void)scanningParams;
vcoubard	1132:692ddf04fc42	864	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	865	}
vcoubard	1132:692ddf04fc42	866
vcoubard	1132:692ddf04fc42	867	/*
vcoubard	1132:692ddf04fc42	868	* APIs with non-virtual implementations.
vcoubard	1132:692ddf04fc42	869	*/
vcoubard	1132:692ddf04fc42	870	public:
vcoubard	1132:692ddf04fc42	871	/**
vcoubard	1184:1589830dbdb7	872	* Get the current GAP state of the device using a bitmask that
vcoubard	1132:692ddf04fc42	873	* describes whether the device is advertising or connected.
vcoubard	1184:1589830dbdb7	874	*
vcoubard	1184:1589830dbdb7	875	* @return The current GAP state of the device.
vcoubard	1132:692ddf04fc42	876	*/
vcoubard	1132:692ddf04fc42	877	GapState_t getState(void) const {
vcoubard	1132:692ddf04fc42	878	return state;
vcoubard	1132:692ddf04fc42	879	}
vcoubard	1132:692ddf04fc42	880
vcoubard	1132:692ddf04fc42	881	/**
vcoubard	1132:692ddf04fc42	882	* Set the GAP advertising mode to use for this device.
vcoubard	1184:1589830dbdb7	883	*
vcoubard	1184:1589830dbdb7	884	* @param[in] advType
vcoubard	1184:1589830dbdb7	885	* The new type of the advertising packets.
vcoubard	1132:692ddf04fc42	886	*/
vcoubard	1132:692ddf04fc42	887	void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
vcoubard	1132:692ddf04fc42	888	_advParams.setAdvertisingType(advType);
vcoubard	1132:692ddf04fc42	889	}
vcoubard	1132:692ddf04fc42	890
vcoubard	1132:692ddf04fc42	891	/**
vcoubard	1184:1589830dbdb7	892	* Set the advertising interval.
vcoubard	1184:1589830dbdb7	893	*
vcoubard	1132:692ddf04fc42	894	* @param[in] interval
vcoubard	1132:692ddf04fc42	895	* Advertising interval in units of milliseconds. Advertising
vcoubard	1132:692ddf04fc42	896	* is disabled if interval is 0. If interval is smaller than
vcoubard	1132:692ddf04fc42	897	* the minimum supported value, then the minimum supported
vcoubard	1132:692ddf04fc42	898	* value is used instead. This minimum value can be discovered
vcoubard	1132:692ddf04fc42	899	* using getMinAdvertisingInterval().
vcoubard	1132:692ddf04fc42	900	*
vcoubard	1132:692ddf04fc42	901	* This field must be set to 0 if connectionMode is equal
vcoubard	1132:692ddf04fc42	902	* to ADV_CONNECTABLE_DIRECTED.
vcoubard	1132:692ddf04fc42	903	*
vcoubard	1184:1589830dbdb7	904	* @note Decreasing this value will allow central devices to detect a
vcoubard	1184:1589830dbdb7	905	* peripheral faster, at the expense of more power being used by the radio
vcoubard	1184:1589830dbdb7	906	* due to the higher data transmit rate.
vcoubard	1132:692ddf04fc42	907	*
vcoubard	1184:1589830dbdb7	908	* @note [WARNING] This API previously used 0.625ms as the unit for its
vcoubard	1184:1589830dbdb7	909	* @p interval argument. That required an explicit conversion from
vcoubard	1184:1589830dbdb7	910	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard	1184:1589830dbdb7	911	* no longer required as the new units are milliseconds. Any application
vcoubard	1184:1589830dbdb7	912	* code depending on the old semantics needs to be updated accordingly.
vcoubard	1132:692ddf04fc42	913	*/
vcoubard	1132:692ddf04fc42	914	void setAdvertisingInterval(uint16_t interval) {
vcoubard	1132:692ddf04fc42	915	if (interval == 0) {
vcoubard	1132:692ddf04fc42	916	stopAdvertising();
vcoubard	1132:692ddf04fc42	917	} else if (interval < getMinAdvertisingInterval()) {
vcoubard	1132:692ddf04fc42	918	interval = getMinAdvertisingInterval();
vcoubard	1132:692ddf04fc42	919	}
vcoubard	1132:692ddf04fc42	920	_advParams.setInterval(interval);
vcoubard	1132:692ddf04fc42	921	}
vcoubard	1132:692ddf04fc42	922
vcoubard	1132:692ddf04fc42	923	/**
vcoubard	1184:1589830dbdb7	924	* Set the advertising timeout. The length of time to advertise for before
vcoubard	1184:1589830dbdb7	925	* a timeout event is generated.
vcoubard	1184:1589830dbdb7	926	*
vcoubard	1132:692ddf04fc42	927	* @param[in] timeout
vcoubard	1132:692ddf04fc42	928	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard	1132:692ddf04fc42	929	* and 16383). Use 0 to disable the advertising timeout.
vcoubard	1132:692ddf04fc42	930	*/
vcoubard	1132:692ddf04fc42	931	void setAdvertisingTimeout(uint16_t timeout) {
vcoubard	1132:692ddf04fc42	932	_advParams.setTimeout(timeout);
vcoubard	1132:692ddf04fc42	933	}
vcoubard	1132:692ddf04fc42	934
vcoubard	1132:692ddf04fc42	935	/**
vcoubard	1132:692ddf04fc42	936	* Start advertising.
vcoubard	1184:1589830dbdb7	937	*
vcoubard	1184:1589830dbdb7	938	* @return BLE_ERROR_NONE if the device started advertising successfully.
vcoubard	1132:692ddf04fc42	939	*/
vcoubard	1132:692ddf04fc42	940	ble_error_t startAdvertising(void) {
vcoubard	1192:c8635748feec	941	ble_error_t rc;
vcoubard	1192:c8635748feec	942	if ((rc = startAdvertising(_advParams)) == BLE_ERROR_NONE) {
vcoubard	1192:c8635748feec	943	state.advertising = 1;
vcoubard	1192:c8635748feec	944	}
vcoubard	1192:c8635748feec	945	return rc;
vcoubard	1132:692ddf04fc42	946	}
vcoubard	1132:692ddf04fc42	947
vcoubard	1132:692ddf04fc42	948	/**
vcoubard	1132:692ddf04fc42	949	* Reset any advertising payload prepared from prior calls to
vcoubard	1132:692ddf04fc42	950	* accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard	1132:692ddf04fc42	951	* initialized advertising payload to the underlying stack.
vcoubard	1132:692ddf04fc42	952	*/
vcoubard	1132:692ddf04fc42	953	void clearAdvertisingPayload(void) {
vcoubard	1132:692ddf04fc42	954	_advPayload.clear();
vcoubard	1194:c8bbf3a6712d	955	setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1132:692ddf04fc42	956	}
vcoubard	1132:692ddf04fc42	957
vcoubard	1132:692ddf04fc42	958	/**
vcoubard	1132:692ddf04fc42	959	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	960	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	961	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	962	* small.
vcoubard	1132:692ddf04fc42	963	*
vcoubard	1132:692ddf04fc42	964	* @param[in] flags
vcoubard	1132:692ddf04fc42	965	* The flags to be added. Please refer to
vcoubard	1132:692ddf04fc42	966	* GapAdvertisingData::Flags for valid flags. Multiple
vcoubard	1132:692ddf04fc42	967	* flags may be specified in combination.
vcoubard	1184:1589830dbdb7	968	*
vcoubard	1184:1589830dbdb7	969	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1184:1589830dbdb7	970	* advertising payload.
vcoubard	1132:692ddf04fc42	971	*/
vcoubard	1132:692ddf04fc42	972	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard	1194:c8bbf3a6712d	973	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1132:692ddf04fc42	974	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	975	if ((rc = advPayloadCopy.addFlags(flags)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	976	return rc;
vcoubard	1132:692ddf04fc42	977	}
vcoubard	1132:692ddf04fc42	978
vcoubard	1194:c8bbf3a6712d	979	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1194:c8bbf3a6712d	980	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	981	_advPayload = advPayloadCopy;
vcoubard	1194:c8bbf3a6712d	982	}
vcoubard	1194:c8bbf3a6712d	983
vcoubard	1194:c8bbf3a6712d	984	return rc;
vcoubard	1132:692ddf04fc42	985	}
vcoubard	1132:692ddf04fc42	986
vcoubard	1132:692ddf04fc42	987	/**
vcoubard	1132:692ddf04fc42	988	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	989	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	990	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	991	* small.
vcoubard	1132:692ddf04fc42	992	*
vcoubard	1184:1589830dbdb7	993	* @param[in] app
vcoubard	1184:1589830dbdb7	994	* The appearance of the peripheral.
vcoubard	1184:1589830dbdb7	995	*
vcoubard	1184:1589830dbdb7	996	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1184:1589830dbdb7	997	* advertising payload.
vcoubard	1132:692ddf04fc42	998	*/
vcoubard	1132:692ddf04fc42	999	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard	1194:c8bbf3a6712d	1000	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1132:692ddf04fc42	1001	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	1002	if ((rc = advPayloadCopy.addAppearance(app)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1003	return rc;
vcoubard	1132:692ddf04fc42	1004	}
vcoubard	1132:692ddf04fc42	1005
vcoubard	1194:c8bbf3a6712d	1006	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1194:c8bbf3a6712d	1007	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1008	_advPayload = advPayloadCopy;
vcoubard	1194:c8bbf3a6712d	1009	}
vcoubard	1194:c8bbf3a6712d	1010
vcoubard	1194:c8bbf3a6712d	1011	return rc;
vcoubard	1132:692ddf04fc42	1012	}
vcoubard	1132:692ddf04fc42	1013
vcoubard	1132:692ddf04fc42	1014	/**
vcoubard	1132:692ddf04fc42	1015	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	1016	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	1017	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	1018	* small.
vcoubard	1132:692ddf04fc42	1019	*
vcoubard	1184:1589830dbdb7	1020	* @param[in] power
vcoubard	1184:1589830dbdb7	1021	* The max transmit power to be used by the controller (in dBm).
vcoubard	1184:1589830dbdb7	1022	*
vcoubard	1184:1589830dbdb7	1023	* @return BLE_ERROR_NONE if the data was successfully added to the
vcoubard	1184:1589830dbdb7	1024	* advertising payload.
vcoubard	1132:692ddf04fc42	1025	*/
vcoubard	1132:692ddf04fc42	1026	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard	1194:c8bbf3a6712d	1027	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1132:692ddf04fc42	1028	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	1029	if ((rc = advPayloadCopy.addTxPower(power)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1030	return rc;
vcoubard	1132:692ddf04fc42	1031	}
vcoubard	1132:692ddf04fc42	1032
vcoubard	1194:c8bbf3a6712d	1033	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1194:c8bbf3a6712d	1034	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1035	_advPayload = advPayloadCopy;
vcoubard	1194:c8bbf3a6712d	1036	}
vcoubard	1194:c8bbf3a6712d	1037
vcoubard	1194:c8bbf3a6712d	1038	return rc;
vcoubard	1132:692ddf04fc42	1039	}
vcoubard	1132:692ddf04fc42	1040
vcoubard	1132:692ddf04fc42	1041	/**
vcoubard	1132:692ddf04fc42	1042	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1132:692ddf04fc42	1043	* advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard	1132:692ddf04fc42	1044	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard	1132:692ddf04fc42	1045	* advertising payload is too small.
vcoubard	1132:692ddf04fc42	1046	*
vcoubard	1184:1589830dbdb7	1047	* @param[in] type
vcoubard	1184:1589830dbdb7	1048	* The type describing the variable length data.
vcoubard	1184:1589830dbdb7	1049	* @param[in] data
vcoubard	1184:1589830dbdb7	1050	* Data bytes.
vcoubard	1184:1589830dbdb7	1051	* @param[in] len
vcoubard	1184:1589830dbdb7	1052	* Length of data.
vcoubard	1136:22aada733dbd	1053	*
vcoubard	1136:22aada733dbd	1054	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1136:22aada733dbd	1055	* matching AD type; otherwise, an appropriate error.
vcoubard	1136:22aada733dbd	1056	*
vcoubard	1136:22aada733dbd	1057	* @note When the specified AD type is INCOMPLETE_LIST_16BIT_SERVICE_IDS,
vcoubard	1136:22aada733dbd	1058	* COMPLETE_LIST_16BIT_SERVICE_IDS, INCOMPLETE_LIST_32BIT_SERVICE_IDS,
vcoubard	1136:22aada733dbd	1059	* COMPLETE_LIST_32BIT_SERVICE_IDS, INCOMPLETE_LIST_128BIT_SERVICE_IDS,
vcoubard	1136:22aada733dbd	1060	* COMPLETE_LIST_128BIT_SERVICE_IDS or LIST_128BIT_SOLICITATION_IDS the
vcoubard	1136:22aada733dbd	1061	* supplied value is appended to the values previously added to the
vcoubard	1136:22aada733dbd	1062	* payload.
vcoubard	1132:692ddf04fc42	1063	*/
vcoubard	1132:692ddf04fc42	1064	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1194:c8bbf3a6712d	1065	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1132:692ddf04fc42	1066	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	1067	if ((rc = advPayloadCopy.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1068	return rc;
vcoubard	1132:692ddf04fc42	1069	}
vcoubard	1132:692ddf04fc42	1070
vcoubard	1194:c8bbf3a6712d	1071	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1194:c8bbf3a6712d	1072	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1073	_advPayload = advPayloadCopy;
vcoubard	1194:c8bbf3a6712d	1074	}
vcoubard	1194:c8bbf3a6712d	1075
vcoubard	1194:c8bbf3a6712d	1076	return rc;
vcoubard	1132:692ddf04fc42	1077	}
vcoubard	1132:692ddf04fc42	1078
vcoubard	1132:692ddf04fc42	1079	/**
vcoubard	1132:692ddf04fc42	1080	* Update a particular ADV field in the advertising payload (based on
vcoubard	1136:22aada733dbd	1081	* matching type).
vcoubard	1132:692ddf04fc42	1082	*
vcoubard	1184:1589830dbdb7	1083	* @param[in] type
vcoubard	1184:1589830dbdb7	1084	* The ADV type field describing the variable length data.
vcoubard	1184:1589830dbdb7	1085	* @param[in] data
vcoubard	1184:1589830dbdb7	1086	* Data bytes.
vcoubard	1184:1589830dbdb7	1087	* @param[in] len
vcoubard	1184:1589830dbdb7	1088	* Length of data.
vcoubard	1132:692ddf04fc42	1089	*
vcoubard	1184:1589830dbdb7	1090	* @note If advertisements are enabled, then the update will take effect immediately.
vcoubard	1132:692ddf04fc42	1091	*
vcoubard	1132:692ddf04fc42	1092	* @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard	1136:22aada733dbd	1093	* matching AD type; otherwise, an appropriate error.
vcoubard	1132:692ddf04fc42	1094	*/
vcoubard	1132:692ddf04fc42	1095	ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1194:c8bbf3a6712d	1096	GapAdvertisingData advPayloadCopy = _advPayload;
vcoubard	1132:692ddf04fc42	1097	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	1098	if ((rc = advPayloadCopy.updateData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1099	return rc;
vcoubard	1132:692ddf04fc42	1100	}
vcoubard	1132:692ddf04fc42	1101
vcoubard	1194:c8bbf3a6712d	1102	rc = setAdvertisingData(advPayloadCopy, _scanResponse);
vcoubard	1194:c8bbf3a6712d	1103	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1104	_advPayload = advPayloadCopy;
vcoubard	1194:c8bbf3a6712d	1105	}
vcoubard	1194:c8bbf3a6712d	1106
vcoubard	1194:c8bbf3a6712d	1107	return rc;
vcoubard	1132:692ddf04fc42	1108	}
vcoubard	1132:692ddf04fc42	1109
vcoubard	1132:692ddf04fc42	1110	/**
vcoubard	1132:692ddf04fc42	1111	* Set up a particular, user-constructed advertisement payload for the
vcoubard	1132:692ddf04fc42	1112	* underlying stack. It would be uncommon for this API to be used directly;
vcoubard	1184:1589830dbdb7	1113	* there are other APIs to build an advertisement payload (refer to
vcoubard	1184:1589830dbdb7	1114	* Gap::accumulateAdvertisingPayload()).
vcoubard	1184:1589830dbdb7	1115	*
vcoubard	1184:1589830dbdb7	1116	* @param[in] payload
vcoubard	1184:1589830dbdb7	1117	* A reference to a user constructed advertisement
vcoubard	1184:1589830dbdb7	1118	* payload.
vcoubard	1184:1589830dbdb7	1119	*
vcoubard	1184:1589830dbdb7	1120	* @return BLE_ERROR_NONE if the advertisement payload was successfully
vcoubard	1184:1589830dbdb7	1121	* set.
vcoubard	1132:692ddf04fc42	1122	*/
vcoubard	1132:692ddf04fc42	1123	ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
vcoubard	1194:c8bbf3a6712d	1124	ble_error_t rc = setAdvertisingData(payload, _scanResponse);
vcoubard	1194:c8bbf3a6712d	1125	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1126	_advPayload = payload;
vcoubard	1194:c8bbf3a6712d	1127	}
vcoubard	1194:c8bbf3a6712d	1128
vcoubard	1194:c8bbf3a6712d	1129	return rc;
vcoubard	1132:692ddf04fc42	1130	}
vcoubard	1132:692ddf04fc42	1131
vcoubard	1132:692ddf04fc42	1132	/**
vcoubard	1184:1589830dbdb7	1133	* Get a reference to the advertising payload.
vcoubard	1184:1589830dbdb7	1134	*
vcoubard	1184:1589830dbdb7	1135	* @return Read back advertising data.
vcoubard	1184:1589830dbdb7	1136	*
vcoubard	1184:1589830dbdb7	1137	* @note Useful for storing and restoring payload.
vcoubard	1132:692ddf04fc42	1138	*/
vcoubard	1132:692ddf04fc42	1139	const GapAdvertisingData &getAdvertisingPayload(void) const {
vcoubard	1132:692ddf04fc42	1140	return _advPayload;
vcoubard	1132:692ddf04fc42	1141	}
vcoubard	1132:692ddf04fc42	1142
vcoubard	1132:692ddf04fc42	1143	/**
vcoubard	1132:692ddf04fc42	1144	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1132:692ddf04fc42	1145	* scanResponse payload.
vcoubard	1132:692ddf04fc42	1146	*
vcoubard	1184:1589830dbdb7	1147	* @param[in] type
vcoubard	1184:1589830dbdb7	1148	* The type describing the variable length data.
vcoubard	1184:1589830dbdb7	1149	* @param[in] data
vcoubard	1184:1589830dbdb7	1150	* Data bytes.
vcoubard	1184:1589830dbdb7	1151	* @param[in] len
vcoubard	1184:1589830dbdb7	1152	* Length of data.
vcoubard	1184:1589830dbdb7	1153	*
vcoubard	1184:1589830dbdb7	1154	* @return BLE_ERROR_NONE if the data was successfully added to the scan
vcoubard	1184:1589830dbdb7	1155	* response payload.
vcoubard	1132:692ddf04fc42	1156	*/
vcoubard	1132:692ddf04fc42	1157	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1194:c8bbf3a6712d	1158	GapAdvertisingData scanResponseCopy = _scanResponse;
vcoubard	1132:692ddf04fc42	1159	ble_error_t rc;
vcoubard	1194:c8bbf3a6712d	1160	if ((rc = scanResponseCopy.addData(type, data, len)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1161	return rc;
vcoubard	1132:692ddf04fc42	1162	}
vcoubard	1132:692ddf04fc42	1163
vcoubard	1194:c8bbf3a6712d	1164	rc = setAdvertisingData(_advPayload, scanResponseCopy);
vcoubard	1194:c8bbf3a6712d	1165	if (rc == BLE_ERROR_NONE) {
vcoubard	1194:c8bbf3a6712d	1166	_scanResponse = scanResponseCopy;
vcoubard	1194:c8bbf3a6712d	1167	}
vcoubard	1194:c8bbf3a6712d	1168
vcoubard	1194:c8bbf3a6712d	1169	return rc;
vcoubard	1132:692ddf04fc42	1170	}
vcoubard	1132:692ddf04fc42	1171
vcoubard	1132:692ddf04fc42	1172	/**
vcoubard	1132:692ddf04fc42	1173	* Reset any scan response prepared from prior calls to
vcoubard	1184:1589830dbdb7	1174	* Gap::accumulateScanResponse().
vcoubard	1132:692ddf04fc42	1175	*
vcoubard	1184:1589830dbdb7	1176	* @note This should be followed by a call to Gap::setAdvertisingPayload() or
vcoubard	1184:1589830dbdb7	1177	* Gap::startAdvertising() before the update takes effect.
vcoubard	1132:692ddf04fc42	1178	*/
vcoubard	1132:692ddf04fc42	1179	void clearScanResponse(void) {
vcoubard	1132:692ddf04fc42	1180	_scanResponse.clear();
vcoubard	1194:c8bbf3a6712d	1181	setAdvertisingData(_advPayload, _scanResponse);
vcoubard	1132:692ddf04fc42	1182	}
vcoubard	1132:692ddf04fc42	1183
vcoubard	1132:692ddf04fc42	1184	/**
vcoubard	1132:692ddf04fc42	1185	* Set up parameters for GAP scanning (observer mode).
vcoubard	1184:1589830dbdb7	1186	*
vcoubard	1132:692ddf04fc42	1187	* @param[in] interval
vcoubard	1132:692ddf04fc42	1188	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	1189	* @param[in] window
vcoubard	1132:692ddf04fc42	1190	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	1191	* @param[in] timeout
vcoubard	1132:692ddf04fc42	1192	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard	1132:692ddf04fc42	1193	* @param[in] activeScanning
vcoubard	1132:692ddf04fc42	1194	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1132:692ddf04fc42	1195	* scan response from a peer if possible.
vcoubard	1132:692ddf04fc42	1196	*
vcoubard	1184:1589830dbdb7	1197	* @return BLE_ERROR_NONE if the scan parameters were correctly set.
vcoubard	1132:692ddf04fc42	1198	*
vcoubard	1184:1589830dbdb7	1199	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1184:1589830dbdb7	1200	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1184:1589830dbdb7	1201	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1184:1589830dbdb7	1202	* to have the interval and window set to the same value. In this case,
vcoubard	1184:1589830dbdb7	1203	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1184:1589830dbdb7	1204	* interval.
vcoubard	1132:692ddf04fc42	1205	*
vcoubard	1184:1589830dbdb7	1206	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1184:1589830dbdb7	1207	* enabled by using startScan().
vcoubard	1184:1589830dbdb7	1208	*
vcoubard	1184:1589830dbdb7	1209	* @note The scan interval and window are recommendations to the BLE stack.
vcoubard	1132:692ddf04fc42	1210	*/
vcoubard	1132:692ddf04fc42	1211	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard	1132:692ddf04fc42	1212	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard	1132:692ddf04fc42	1213	uint16_t timeout = 0,
vcoubard	1132:692ddf04fc42	1214	bool activeScanning = false) {
vcoubard	1132:692ddf04fc42	1215	ble_error_t rc;
vcoubard	1132:692ddf04fc42	1216	if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
vcoubard	1132:692ddf04fc42	1217	((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
vcoubard	1132:692ddf04fc42	1218	((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
vcoubard	1132:692ddf04fc42	1219	_scanningParams.setActiveScanning(activeScanning);
vcoubard	1132:692ddf04fc42	1220	return BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1221	}
vcoubard	1132:692ddf04fc42	1222
vcoubard	1132:692ddf04fc42	1223	return rc;
vcoubard	1132:692ddf04fc42	1224	}
vcoubard	1132:692ddf04fc42	1225
vcoubard	1132:692ddf04fc42	1226	/**
vcoubard	1132:692ddf04fc42	1227	* Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard	1184:1589830dbdb7	1228	*
vcoubard	1132:692ddf04fc42	1229	* @param[in] interval
vcoubard	1132:692ddf04fc42	1230	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	1231	*
vcoubard	1184:1589830dbdb7	1232	* @return BLE_ERROR_NONE if the scan interval was correctly set.
vcoubard	1132:692ddf04fc42	1233	*
vcoubard	1184:1589830dbdb7	1234	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1184:1589830dbdb7	1235	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1184:1589830dbdb7	1236	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1184:1589830dbdb7	1237	* to have the interval and window set to the same value. In this case,
vcoubard	1184:1589830dbdb7	1238	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1184:1589830dbdb7	1239	* interval.
vcoubard	1184:1589830dbdb7	1240	*
vcoubard	1184:1589830dbdb7	1241	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1184:1589830dbdb7	1242	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	1243	*/
vcoubard	1132:692ddf04fc42	1244	ble_error_t setScanInterval(uint16_t interval) {
vcoubard	1132:692ddf04fc42	1245	return _scanningParams.setInterval(interval);
vcoubard	1132:692ddf04fc42	1246	}
vcoubard	1132:692ddf04fc42	1247
vcoubard	1132:692ddf04fc42	1248	/**
vcoubard	1132:692ddf04fc42	1249	* Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard	1184:1589830dbdb7	1250	*
vcoubard	1132:692ddf04fc42	1251	* @param[in] window
vcoubard	1132:692ddf04fc42	1252	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	1253	*
vcoubard	1184:1589830dbdb7	1254	* @return BLE_ERROR_NONE if the scan window was correctly set.
vcoubard	1132:692ddf04fc42	1255	*
vcoubard	1184:1589830dbdb7	1256	* @note The scanning window divided by the interval determines the duty cycle for
vcoubard	1184:1589830dbdb7	1257	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1184:1589830dbdb7	1258	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1184:1589830dbdb7	1259	* to have the interval and window set to the same value. In this case,
vcoubard	1184:1589830dbdb7	1260	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1184:1589830dbdb7	1261	* interval.
vcoubard	1132:692ddf04fc42	1262	*
vcoubard	1184:1589830dbdb7	1263	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1184:1589830dbdb7	1264	* enabled by using startScan().
vcoubard	1184:1589830dbdb7	1265	*
vcoubard	1184:1589830dbdb7	1266	* @note If scanning is already active, the updated value of scanWindow will be
vcoubard	1184:1589830dbdb7	1267	* propagated to the underlying BLE stack.
vcoubard	1132:692ddf04fc42	1268	*/
vcoubard	1132:692ddf04fc42	1269	ble_error_t setScanWindow(uint16_t window) {
vcoubard	1132:692ddf04fc42	1270	ble_error_t rc;
vcoubard	1132:692ddf04fc42	1271	if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1272	return rc;
vcoubard	1132:692ddf04fc42	1273	}
vcoubard	1132:692ddf04fc42	1274
vcoubard	1132:692ddf04fc42	1275	/* If scanning is already active, propagate the new setting to the stack. */
vcoubard	1132:692ddf04fc42	1276	if (scanningActive) {
vcoubard	1132:692ddf04fc42	1277	return startRadioScan(_scanningParams);
vcoubard	1132:692ddf04fc42	1278	}
vcoubard	1132:692ddf04fc42	1279
vcoubard	1132:692ddf04fc42	1280	return BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1281	}
vcoubard	1132:692ddf04fc42	1282
vcoubard	1132:692ddf04fc42	1283	/**
vcoubard	1132:692ddf04fc42	1284	* Set up parameters for GAP scanning (observer mode).
vcoubard	1184:1589830dbdb7	1285	*
vcoubard	1132:692ddf04fc42	1286	* @param[in] timeout
vcoubard	1132:692ddf04fc42	1287	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
vcoubard	1132:692ddf04fc42	1288	*
vcoubard	1184:1589830dbdb7	1289	* @return BLE_ERROR_NONE if the scan timeout was correctly set.
vcoubard	1132:692ddf04fc42	1290	*
vcoubard	1184:1589830dbdb7	1291	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1184:1589830dbdb7	1292	* enabled by using startScan().
vcoubard	1184:1589830dbdb7	1293	*
vcoubard	1184:1589830dbdb7	1294	* @note If scanning is already active, the updated value of scanTimeout will be
vcoubard	1184:1589830dbdb7	1295	* propagated to the underlying BLE stack.
vcoubard	1132:692ddf04fc42	1296	*/
vcoubard	1132:692ddf04fc42	1297	ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard	1132:692ddf04fc42	1298	ble_error_t rc;
vcoubard	1132:692ddf04fc42	1299	if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1300	return rc;
vcoubard	1132:692ddf04fc42	1301	}
vcoubard	1132:692ddf04fc42	1302
vcoubard	1132:692ddf04fc42	1303	/* If scanning is already active, propagate the new settings to the stack. */
vcoubard	1132:692ddf04fc42	1304	if (scanningActive) {
vcoubard	1132:692ddf04fc42	1305	return startRadioScan(_scanningParams);
vcoubard	1132:692ddf04fc42	1306	}
vcoubard	1132:692ddf04fc42	1307
vcoubard	1132:692ddf04fc42	1308	return BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1309	}
vcoubard	1132:692ddf04fc42	1310
vcoubard	1132:692ddf04fc42	1311	/**
vcoubard	1184:1589830dbdb7	1312	* Modify the active scanning parameter for GAP scanning (observer mode).
vcoubard	1184:1589830dbdb7	1313	* This is used to fetch the scan response from a peer if possible.
vcoubard	1184:1589830dbdb7	1314	*
vcoubard	1132:692ddf04fc42	1315	* @param[in] activeScanning
vcoubard	1184:1589830dbdb7	1316	* Set to True if active-scanning is required.
vcoubard	1132:692ddf04fc42	1317	*
vcoubard	1184:1589830dbdb7	1318	* @return BLE_ERROR_NONE if active scanning was successfully set.
vcoubard	1132:692ddf04fc42	1319	*
vcoubard	1184:1589830dbdb7	1320	* @note Once the scanning parameters have been configured, scanning can be
vcoubard	1184:1589830dbdb7	1321	* enabled by using startScan().
vcoubard	1184:1589830dbdb7	1322	*
vcoubard	1184:1589830dbdb7	1323	* @note If scanning is already in progress, then active-scanning will be enabled
vcoubard	1184:1589830dbdb7	1324	* for the underlying BLE stack.
vcoubard	1132:692ddf04fc42	1325	*/
vcoubard	1132:692ddf04fc42	1326	ble_error_t setActiveScanning(bool activeScanning) {
vcoubard	1132:692ddf04fc42	1327	_scanningParams.setActiveScanning(activeScanning);
vcoubard	1132:692ddf04fc42	1328
vcoubard	1132:692ddf04fc42	1329	/* If scanning is already active, propagate the new settings to the stack. */
vcoubard	1132:692ddf04fc42	1330	if (scanningActive) {
vcoubard	1132:692ddf04fc42	1331	return startRadioScan(_scanningParams);
vcoubard	1132:692ddf04fc42	1332	}
vcoubard	1132:692ddf04fc42	1333
vcoubard	1132:692ddf04fc42	1334	return BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1335	}
vcoubard	1132:692ddf04fc42	1336
vcoubard	1132:692ddf04fc42	1337	/**
vcoubard	1132:692ddf04fc42	1338	* Start scanning (Observer Procedure) based on the parameters currently in
vcoubard	1132:692ddf04fc42	1339	* effect.
vcoubard	1132:692ddf04fc42	1340	*
vcoubard	1132:692ddf04fc42	1341	* @param[in] callback
vcoubard	1132:692ddf04fc42	1342	* The application-specific callback to be invoked upon
vcoubard	1132:692ddf04fc42	1343	* receiving every advertisement report. This can be passed in
vcoubard	1132:692ddf04fc42	1344	* as NULL, in which case scanning may not be enabled at all.
vcoubard	1184:1589830dbdb7	1345	*
vcoubard	1184:1589830dbdb7	1346	* @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard	1184:1589830dbdb7	1347	* procedure.
vcoubard	1132:692ddf04fc42	1348	*/
vcoubard	1132:692ddf04fc42	1349	ble_error_t startScan(void (callback)(const AdvertisementCallbackParams_t params)) {
vcoubard	1132:692ddf04fc42	1350	ble_error_t err = BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1351	if (callback) {
vcoubard	1132:692ddf04fc42	1352	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1353	scanningActive = true;
vcoubard	1132:692ddf04fc42	1354	onAdvertisementReport.attach(callback);
vcoubard	1132:692ddf04fc42	1355	}
vcoubard	1132:692ddf04fc42	1356	}
vcoubard	1132:692ddf04fc42	1357
vcoubard	1132:692ddf04fc42	1358	return err;
vcoubard	1132:692ddf04fc42	1359	}
vcoubard	1132:692ddf04fc42	1360
vcoubard	1132:692ddf04fc42	1361	/**
vcoubard	1184:1589830dbdb7	1362	* Same as Gap::startScan(), but allows the possibility to add an object
vcoubard	1184:1589830dbdb7	1363	* reference and member function as handler for advertisement event
vcoubard	1184:1589830dbdb7	1364	* callbacks.
vcoubard	1184:1589830dbdb7	1365	*
vcoubard	1184:1589830dbdb7	1366	* @param[in] object
vcoubard	1184:1589830dbdb7	1367	* Pointer to the object of a class defining the member callback
vcoubard	1184:1589830dbdb7	1368	* function (@p callbackMember).
vcoubard	1184:1589830dbdb7	1369	* @param[in] callbackMember
vcoubard	1184:1589830dbdb7	1370	* The member callback (within the context of an object) to be
vcoubard	1184:1589830dbdb7	1371	* invoked.
vcoubard	1184:1589830dbdb7	1372	*
vcoubard	1184:1589830dbdb7	1373	* @return BLE_ERROR_NONE if the device successfully started the scan
vcoubard	1184:1589830dbdb7	1374	* procedure.
vcoubard	1132:692ddf04fc42	1375	*/
vcoubard	1132:692ddf04fc42	1376	template<typename T>
vcoubard	1132:692ddf04fc42	1377	ble_error_t startScan(T object, void (T::callbackMember)(const AdvertisementCallbackParams_t *params)) {
vcoubard	1132:692ddf04fc42	1378	ble_error_t err = BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	1379	if (object && callbackMember) {
vcoubard	1132:692ddf04fc42	1380	if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
vcoubard	1132:692ddf04fc42	1381	scanningActive = true;
vcoubard	1132:692ddf04fc42	1382	onAdvertisementReport.attach(object, callbackMember);
vcoubard	1132:692ddf04fc42	1383	}
vcoubard	1132:692ddf04fc42	1384	}
vcoubard	1132:692ddf04fc42	1385
vcoubard	1132:692ddf04fc42	1386	return err;
vcoubard	1132:692ddf04fc42	1387	}
vcoubard	1132:692ddf04fc42	1388
vcoubard	1132:692ddf04fc42	1389	/**
vcoubard	1132:692ddf04fc42	1390	* Initialize radio-notification events to be generated from the stack.
vcoubard	1132:692ddf04fc42	1391	* This API doesn't need to be called directly.
vcoubard	1132:692ddf04fc42	1392	*
vcoubard	1132:692ddf04fc42	1393	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1132:692ddf04fc42	1394	* (nACTIVE) signals from the stack that notify the application when the
vcoubard	1132:692ddf04fc42	1395	* radio is in use.
vcoubard	1132:692ddf04fc42	1396	*
vcoubard	1132:692ddf04fc42	1397	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1132:692ddf04fc42	1398	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1132:692ddf04fc42	1399	* by the application programmer to synchronize application logic with radio
vcoubard	1132:692ddf04fc42	1400	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1132:692ddf04fc42	1401	* devices, to manage peak current drawn during periods when the radio is on,
vcoubard	1132:692ddf04fc42	1402	* or to trigger sensor data collection for transmission in the Radio Event.
vcoubard	1132:692ddf04fc42	1403	*
vcoubard	1132:692ddf04fc42	1404	* @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
vcoubard	1132:692ddf04fc42	1405	*/
vcoubard	1132:692ddf04fc42	1406	virtual ble_error_t initRadioNotification(void) {
vcoubard	1132:692ddf04fc42	1407	return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
vcoubard	1132:692ddf04fc42	1408	}
vcoubard	1132:692ddf04fc42	1409
vcoubard	1132:692ddf04fc42	1410	private:
vcoubard	1184:1589830dbdb7	1411	/**
vcoubard	1184:1589830dbdb7	1412	* Functionality that is BLE stack-dependent and must be implemented by the
vcoubard	1184:1589830dbdb7	1413	* ported. This is a helper function to set the advertising data in the
vcoubard	1184:1589830dbdb7	1414	* BLE stack.
vcoubard	1184:1589830dbdb7	1415	*
vcoubard	1184:1589830dbdb7	1416	* @param[in] advData
vcoubard	1184:1589830dbdb7	1417	* The new advertising data.
vcoubard	1184:1589830dbdb7	1418	* @param[in] scanResponse
vcoubard	1184:1589830dbdb7	1419	* The new scan response data.
vcoubard	1184:1589830dbdb7	1420	*
vcoubard	1184:1589830dbdb7	1421	* @return BLE_ERROR_NONE if the advertising data was set successfully.
vcoubard	1184:1589830dbdb7	1422	*/
vcoubard	1132:692ddf04fc42	1423	virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
vcoubard	1184:1589830dbdb7	1424
vcoubard	1184:1589830dbdb7	1425	/**
vcoubard	1184:1589830dbdb7	1426	* Functionality that is BLE stack-dependent and must be implemented by the
vcoubard	1184:1589830dbdb7	1427	* ported. This is a helper function to start the advertising procedure in
vcoubard	1184:1589830dbdb7	1428	* the underlying BLE stack.
vcoubard	1184:1589830dbdb7	1429	*
vcoubard	1184:1589830dbdb7	1430	* @param[in]
vcoubard	1184:1589830dbdb7	1431	* The advertising parameters.
vcoubard	1184:1589830dbdb7	1432	*
vcoubard	1184:1589830dbdb7	1433	* @return BLE_ERROR_NONE if the advertising procedure was successfully
vcoubard	1184:1589830dbdb7	1434	* started.
vcoubard	1184:1589830dbdb7	1435	*/
vcoubard	1132:692ddf04fc42	1436	virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
vcoubard	1132:692ddf04fc42	1437
vcoubard	1132:692ddf04fc42	1438	public:
vcoubard	1132:692ddf04fc42	1439	/**
vcoubard	1184:1589830dbdb7	1440	* Accessor to read back currently active advertising parameters.
vcoubard	1184:1589830dbdb7	1441	*
vcoubard	1184:1589830dbdb7	1442	* @return A reference to the current advertising parameters.
vcoubard	1132:692ddf04fc42	1443	*/
vcoubard	1132:692ddf04fc42	1444	GapAdvertisingParams &getAdvertisingParams(void) {
vcoubard	1132:692ddf04fc42	1445	return _advParams;
vcoubard	1132:692ddf04fc42	1446	}
vcoubard	1184:1589830dbdb7	1447
vcoubard	1184:1589830dbdb7	1448	/**
vcoubard	1184:1589830dbdb7	1449	* A const alternative to Gap::getAdvertisingParams().
vcoubard	1184:1589830dbdb7	1450	*
vcoubard	1184:1589830dbdb7	1451	* @return A const reference to the current advertising parameters.
vcoubard	1184:1589830dbdb7	1452	*/
vcoubard	1132:692ddf04fc42	1453	const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard	1132:692ddf04fc42	1454	return _advParams;
vcoubard	1132:692ddf04fc42	1455	}
vcoubard	1132:692ddf04fc42	1456
vcoubard	1132:692ddf04fc42	1457	/**
vcoubard	1132:692ddf04fc42	1458	* Set up a particular, user-constructed set of advertisement parameters for
vcoubard	1132:692ddf04fc42	1459	* the underlying stack. It would be uncommon for this API to be used
vcoubard	1132:692ddf04fc42	1460	* directly; there are other APIs to tweak advertisement parameters
vcoubard	1132:692ddf04fc42	1461	* individually.
vcoubard	1184:1589830dbdb7	1462	*
vcoubard	1184:1589830dbdb7	1463	* @param[in] newParams
vcoubard	1184:1589830dbdb7	1464	* The new advertising parameters.
vcoubard	1132:692ddf04fc42	1465	*/
vcoubard	1132:692ddf04fc42	1466	void setAdvertisingParams(const GapAdvertisingParams &newParams) {
vcoubard	1132:692ddf04fc42	1467	_advParams = newParams;
vcoubard	1132:692ddf04fc42	1468	}
vcoubard	1132:692ddf04fc42	1469
vcoubard	1132:692ddf04fc42	1470	/* Event callback handlers. */
vcoubard	1132:692ddf04fc42	1471	public:
vcoubard	1132:692ddf04fc42	1472	/**
vcoubard	1132:692ddf04fc42	1473	* Set up a callback for timeout events. Refer to TimeoutSource_t for
vcoubard	1132:692ddf04fc42	1474	* possible event types.
vcoubard	1184:1589830dbdb7	1475	*
vcoubard	1184:1589830dbdb7	1476	* @param[in] callback
vcoubard	1184:1589830dbdb7	1477	* Event handler being registered.
vcoubard	1184:1589830dbdb7	1478	*
vcoubard	1184:1589830dbdb7	1479	* @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard	1132:692ddf04fc42	1480	*/
vcoubard	1132:692ddf04fc42	1481	void onTimeout(TimeoutEventCallback_t callback) {
vcoubard	1132:692ddf04fc42	1482	timeoutCallbackChain.add(callback);
vcoubard	1132:692ddf04fc42	1483	}
vcoubard	1132:692ddf04fc42	1484
vcoubard	1132:692ddf04fc42	1485	/**
vcoubard	1184:1589830dbdb7	1486	* @brief Provide access to the callchain of timeout event callbacks.
vcoubard	1184:1589830dbdb7	1487	*
vcoubard	1184:1589830dbdb7	1488	* @note It is possible to register callbacks using onTimeout().add(callback).
vcoubard	1184:1589830dbdb7	1489	*
vcoubard	1184:1589830dbdb7	1490	* @note It is possible to unregister callbacks using onTimeout().detach(callback).
vcoubard	1184:1589830dbdb7	1491	*
vcoubard	1184:1589830dbdb7	1492	* @return A reference to the timeout event callbacks chain.
vcoubard	1132:692ddf04fc42	1493	*/
vcoubard	1132:692ddf04fc42	1494	TimeoutEventCallbackChain_t& onTimeout() {
vcoubard	1132:692ddf04fc42	1495	return timeoutCallbackChain;
vcoubard	1132:692ddf04fc42	1496	}
vcoubard	1132:692ddf04fc42	1497
vcoubard	1132:692ddf04fc42	1498	/**
vcoubard	1132:692ddf04fc42	1499	* Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard	1184:1589830dbdb7	1500	*
vcoubard	1184:1589830dbdb7	1501	* @param[in] callback
vcoubard	1184:1589830dbdb7	1502	* Event handler being registered.
vcoubard	1184:1589830dbdb7	1503	*
vcoubard	1132:692ddf04fc42	1504	* @note It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard	1132:692ddf04fc42	1505	*/
vcoubard	1184:1589830dbdb7	1506	void onConnection(ConnectionEventCallback_t callback) {
vcoubard	1184:1589830dbdb7	1507	connectionCallChain.add(callback);
vcoubard	1184:1589830dbdb7	1508	}
vcoubard	1132:692ddf04fc42	1509
vcoubard	1132:692ddf04fc42	1510	/**
vcoubard	1184:1589830dbdb7	1511	* Same as Gap::onConnection(), but allows the possibility to add an object
vcoubard	1184:1589830dbdb7	1512	* reference and member function as handler for connection event
vcoubard	1184:1589830dbdb7	1513	* callbacks.
vcoubard	1184:1589830dbdb7	1514	*
vcoubard	1184:1589830dbdb7	1515	* @param[in] tptr
vcoubard	1184:1589830dbdb7	1516	* Pointer to the object of a class defining the member callback
vcoubard	1184:1589830dbdb7	1517	* function (@p mptr).
vcoubard	1184:1589830dbdb7	1518	* @param[in] mptr
vcoubard	1184:1589830dbdb7	1519	* The member callback (within the context of an object) to be
vcoubard	1184:1589830dbdb7	1520	* invoked.
vcoubard	1184:1589830dbdb7	1521	*/
vcoubard	1184:1589830dbdb7	1522	template<typename T>
vcoubard	1184:1589830dbdb7	1523	void onConnection(T tptr, void (T::mptr)(const ConnectionCallbackParams_t*)) {
vcoubard	1184:1589830dbdb7	1524	connectionCallChain.add(tptr, mptr);
vcoubard	1184:1589830dbdb7	1525	}
vcoubard	1184:1589830dbdb7	1526
vcoubard	1184:1589830dbdb7	1527	/**
vcoubard	1184:1589830dbdb7	1528	* @brief Provide access to the callchain of connection event callbacks.
vcoubard	1184:1589830dbdb7	1529	*
vcoubard	1184:1589830dbdb7	1530	* @return A reference to the connection event callbacks chain.
vcoubard	1184:1589830dbdb7	1531	*
vcoubard	1184:1589830dbdb7	1532	* @note It is possible to register callbacks using onConnection().add(callback).
vcoubard	1184:1589830dbdb7	1533	*
vcoubard	1184:1589830dbdb7	1534	* @note It is possible to unregister callbacks using onConnection().detach(callback).
vcoubard	1132:692ddf04fc42	1535	*/
vcoubard	1133:6362b7c2fdff	1536	ConnectionEventCallbackChain_t& onConnection() {
vcoubard	1132:692ddf04fc42	1537	return connectionCallChain;
vcoubard	1132:692ddf04fc42	1538	}
vcoubard	1132:692ddf04fc42	1539
vcoubard	1132:692ddf04fc42	1540	/**
vcoubard	1132:692ddf04fc42	1541	* Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard	1184:1589830dbdb7	1542	*
vcoubard	1184:1589830dbdb7	1543	* @param[in] callback
vcoubard	1184:1589830dbdb7	1544	Event handler being registered.
vcoubard	1184:1589830dbdb7	1545	*
vcoubard	1184:1589830dbdb7	1546	* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard	1132:692ddf04fc42	1547	*/
vcoubard	1184:1589830dbdb7	1548	void onDisconnection(DisconnectionEventCallback_t callback) {
vcoubard	1184:1589830dbdb7	1549	disconnectionCallChain.add(callback);
vcoubard	1184:1589830dbdb7	1550	}
vcoubard	1132:692ddf04fc42	1551
vcoubard	1132:692ddf04fc42	1552	/**
vcoubard	1184:1589830dbdb7	1553	* Same as Gap::onDisconnection(), but allows the possibility to add an object
vcoubard	1184:1589830dbdb7	1554	* reference and member function as handler for disconnection event
vcoubard	1184:1589830dbdb7	1555	* callbacks.
vcoubard	1184:1589830dbdb7	1556	*
vcoubard	1184:1589830dbdb7	1557	* @param[in] tptr
vcoubard	1184:1589830dbdb7	1558	* Pointer to the object of a class defining the member callback
vcoubard	1184:1589830dbdb7	1559	* function (@p mptr).
vcoubard	1184:1589830dbdb7	1560	* @param[in] mptr
vcoubard	1184:1589830dbdb7	1561	* The member callback (within the context of an object) to be
vcoubard	1184:1589830dbdb7	1562	* invoked.
vcoubard	1184:1589830dbdb7	1563	*/
vcoubard	1184:1589830dbdb7	1564	template<typename T>
vcoubard	1184:1589830dbdb7	1565	void onDisconnection(T tptr, void (T::mptr)(const DisconnectionCallbackParams_t*)) {
vcoubard	1184:1589830dbdb7	1566	disconnectionCallChain.add(tptr, mptr);
vcoubard	1184:1589830dbdb7	1567	}
vcoubard	1184:1589830dbdb7	1568
vcoubard	1184:1589830dbdb7	1569	/**
vcoubard	1184:1589830dbdb7	1570	* @brief Provide access to the callchain of disconnection event callbacks.
vcoubard	1184:1589830dbdb7	1571	*
vcoubard	1184:1589830dbdb7	1572	* @return A reference to the disconnection event callback chain.
vcoubard	1184:1589830dbdb7	1573	*
vcoubard	1184:1589830dbdb7	1574	* @note It is possible to register callbacks using onDisconnection().add(callback).
vcoubard	1184:1589830dbdb7	1575	*
vcoubard	1184:1589830dbdb7	1576	* @note It is possible to unregister callbacks using onDisconnection().detach(callback).
vcoubard	1132:692ddf04fc42	1577	*/
vcoubard	1132:692ddf04fc42	1578	DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard	1132:692ddf04fc42	1579	return disconnectionCallChain;
vcoubard	1132:692ddf04fc42	1580	}
vcoubard	1132:692ddf04fc42	1581
vcoubard	1132:692ddf04fc42	1582	/**
vcoubard	1132:692ddf04fc42	1583	* Set the application callback for radio-notification events.
vcoubard	1132:692ddf04fc42	1584	*
vcoubard	1132:692ddf04fc42	1585	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1132:692ddf04fc42	1586	* (nACTIVE) signals from the stack that notify the application when the
vcoubard	1132:692ddf04fc42	1587	* radio is in use.
vcoubard	1132:692ddf04fc42	1588	*
vcoubard	1132:692ddf04fc42	1589	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1132:692ddf04fc42	1590	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1132:692ddf04fc42	1591	* by the application programmer to synchronize application logic with radio
vcoubard	1132:692ddf04fc42	1592	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1132:692ddf04fc42	1593	* devices, to manage peak current drawn during periods when the radio is on,
vcoubard	1132:692ddf04fc42	1594	* or to trigger sensor data collection for transmission in the Radio Event.
vcoubard	1132:692ddf04fc42	1595	*
vcoubard	1184:1589830dbdb7	1596	* @param[in] callback
vcoubard	1184:1589830dbdb7	1597	* The application handler to be invoked in response to a radio
vcoubard	1184:1589830dbdb7	1598	* ACTIVE/INACTIVE event.
vcoubard	1132:692ddf04fc42	1599	*/
vcoubard	1132:692ddf04fc42	1600	void onRadioNotification(void (*callback)(bool param)) {
vcoubard	1132:692ddf04fc42	1601	radioNotificationCallback.attach(callback);
vcoubard	1132:692ddf04fc42	1602	}
vcoubard	1184:1589830dbdb7	1603
vcoubard	1184:1589830dbdb7	1604	/**
vcoubard	1184:1589830dbdb7	1605	* Same as Gap::onRadioNotification(), but allows the posibility to
vcoubard	1184:1589830dbdb7	1606	* register an object reference and member function as handler for radio
vcoubard	1184:1589830dbdb7	1607	* notification events.
vcoubard	1184:1589830dbdb7	1608	*
vcoubard	1184:1589830dbdb7	1609	* @param[in] tptr
vcoubard	1184:1589830dbdb7	1610	* Pointer to the object of a class defining the member callback
vcoubard	1184:1589830dbdb7	1611	* function (@p mptr).
vcoubard	1184:1589830dbdb7	1612	* @param[in] mptr
vcoubard	1184:1589830dbdb7	1613	* The member callback (within the context of an object) to be
vcoubard	1184:1589830dbdb7	1614	* invoked in response to a radio ACTIVE/INACTIVE event.
vcoubard	1184:1589830dbdb7	1615	*/
vcoubard	1132:692ddf04fc42	1616	template <typename T>
vcoubard	1132:692ddf04fc42	1617	void onRadioNotification(T tptr, void (T::mptr)(bool)) {
vcoubard	1132:692ddf04fc42	1618	radioNotificationCallback.attach(tptr, mptr);
vcoubard	1132:692ddf04fc42	1619	}
vcoubard	1132:692ddf04fc42	1620
vcoubard	1136:22aada733dbd	1621	/**
vcoubard	1136:22aada733dbd	1622	* Setup a callback to be invoked to notify the user application that the
vcoubard	1136:22aada733dbd	1623	* Gap instance is about to shutdown (possibly as a result of a call
vcoubard	1136:22aada733dbd	1624	* to BLE::shutdown()).
vcoubard	1136:22aada733dbd	1625	*
vcoubard	1184:1589830dbdb7	1626	* @param[in] callback
vcoubard	1184:1589830dbdb7	1627	* The handler that is being registered to be notified of
vcoubard	1184:1589830dbdb7	1628	* shutdown events.
vcoubard	1184:1589830dbdb7	1629	*
vcoubard	1184:1589830dbdb7	1630	* @note It is possible to chain together multiple onShutdown callbacks
vcoubard	1136:22aada733dbd	1631	* (potentially from different modules of an application) to be notified
vcoubard	1136:22aada733dbd	1632	* before the Gap instance is shutdown.
vcoubard	1136:22aada733dbd	1633	*
vcoubard	1184:1589830dbdb7	1634	* @note It is also possible to set up a callback into a member function of
vcoubard	1136:22aada733dbd	1635	* some object.
vcoubard	1136:22aada733dbd	1636	*
vcoubard	1184:1589830dbdb7	1637	* @note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard	1136:22aada733dbd	1638	*/
vcoubard	1136:22aada733dbd	1639	void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard	1136:22aada733dbd	1640	shutdownCallChain.add(callback);
vcoubard	1136:22aada733dbd	1641	}
vcoubard	1184:1589830dbdb7	1642
vcoubard	1184:1589830dbdb7	1643	/**
vcoubard	1184:1589830dbdb7	1644	* Same as Gap::onShutdown(), but allows the posibility to
vcoubard	1184:1589830dbdb7	1645	* register an object reference and member function as handler for shutdown
vcoubard	1184:1589830dbdb7	1646	* events.
vcoubard	1184:1589830dbdb7	1647	*
vcoubard	1184:1589830dbdb7	1648	* @param[in] objPtr
vcoubard	1184:1589830dbdb7	1649	* Pointer to the object of a class defining the member callback
vcoubard	1184:1589830dbdb7	1650	* function (@p memberPtr).
vcoubard	1184:1589830dbdb7	1651	* @param[in] memberPtr
vcoubard	1184:1589830dbdb7	1652	* The member callback (within the context of an object) to be
vcoubard	1184:1589830dbdb7	1653	* invoked in response to a shutdown event.
vcoubard	1184:1589830dbdb7	1654	*/
vcoubard	1136:22aada733dbd	1655	template <typename T>
vcoubard	1193:718787de23b7	1656	void onShutdown(T objPtr, void (T::memberPtr)(const Gap *)) {
vcoubard	1136:22aada733dbd	1657	shutdownCallChain.add(objPtr, memberPtr);
vcoubard	1136:22aada733dbd	1658	}
vcoubard	1136:22aada733dbd	1659
vcoubard	1136:22aada733dbd	1660	/**
vcoubard	1184:1589830dbdb7	1661	* @brief Provide access to the callchain of shutdown event callbacks.
vcoubard	1184:1589830dbdb7	1662	*
vcoubard	1184:1589830dbdb7	1663	* @return A reference to the shutdown event callback chain.
vcoubard	1184:1589830dbdb7	1664	*
vcoubard	1184:1589830dbdb7	1665	* @note It is possible to register callbacks using onShutdown().add(callback).
vcoubard	1184:1589830dbdb7	1666	*
vcoubard	1184:1589830dbdb7	1667	* @note It is possible to unregister callbacks using onShutdown().detach(callback).
vcoubard	1136:22aada733dbd	1668	*/
vcoubard	1136:22aada733dbd	1669	GapShutdownCallbackChain_t& onShutdown() {
vcoubard	1136:22aada733dbd	1670	return shutdownCallChain;
vcoubard	1136:22aada733dbd	1671	}
vcoubard	1136:22aada733dbd	1672
vcoubard	1136:22aada733dbd	1673	public:
vcoubard	1136:22aada733dbd	1674	/**
vcoubard	1136:22aada733dbd	1675	* Notify all registered onShutdown callbacks that the Gap instance is
vcoubard	1136:22aada733dbd	1676	* about to be shutdown and clear all Gap state of the
vcoubard	1136:22aada733dbd	1677	* associated object.
vcoubard	1136:22aada733dbd	1678	*
vcoubard	1136:22aada733dbd	1679	* This function is meant to be overridden in the platform-specific
vcoubard	1136:22aada733dbd	1680	* sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard	1136:22aada733dbd	1681	* state and not the data held in Gap members. This shall be achieved by a
vcoubard	1136:22aada733dbd	1682	* call to Gap::reset() from the sub-class' reset() implementation.
vcoubard	1136:22aada733dbd	1683	*
vcoubard	1136:22aada733dbd	1684	* @return BLE_ERROR_NONE on success.
vcoubard	1136:22aada733dbd	1685	*
vcoubard	1184:1589830dbdb7	1686	* @note Currently a call to reset() does not reset the advertising and
vcoubard	1136:22aada733dbd	1687	* scan parameters to default values.
vcoubard	1136:22aada733dbd	1688	*/
vcoubard	1136:22aada733dbd	1689	virtual ble_error_t reset(void) {
vcoubard	1136:22aada733dbd	1690	/* Notify that the instance is about to shutdown */
vcoubard	1136:22aada733dbd	1691	shutdownCallChain.call(this);
vcoubard	1136:22aada733dbd	1692	shutdownCallChain.clear();
vcoubard	1136:22aada733dbd	1693
vcoubard	1136:22aada733dbd	1694	/* Clear Gap state */
vcoubard	1136:22aada733dbd	1695	state.advertising = 0;
vcoubard	1136:22aada733dbd	1696	state.connected = 0;
vcoubard	1181:e11b058d005e	1697	connectionCount = 0;
vcoubard	1136:22aada733dbd	1698
vcoubard	1136:22aada733dbd	1699	/* Clear scanning state */
vcoubard	1136:22aada733dbd	1700	scanningActive = false;
vcoubard	1136:22aada733dbd	1701
vcoubard	1136:22aada733dbd	1702	/* Clear advertising and scanning data */
vcoubard	1136:22aada733dbd	1703	_advPayload.clear();
vcoubard	1136:22aada733dbd	1704	_scanResponse.clear();
vcoubard	1136:22aada733dbd	1705
vcoubard	1136:22aada733dbd	1706	/* Clear callbacks */
vcoubard	1136:22aada733dbd	1707	timeoutCallbackChain.clear();
vcoubard	1136:22aada733dbd	1708	connectionCallChain.clear();
vcoubard	1136:22aada733dbd	1709	disconnectionCallChain.clear();
vcoubard	1136:22aada733dbd	1710	radioNotificationCallback = NULL;
vcoubard	1136:22aada733dbd	1711	onAdvertisementReport = NULL;
vcoubard	1136:22aada733dbd	1712
vcoubard	1136:22aada733dbd	1713	return BLE_ERROR_NONE;
vcoubard	1136:22aada733dbd	1714	}
vcoubard	1136:22aada733dbd	1715
vcoubard	1132:692ddf04fc42	1716	protected:
vcoubard	1184:1589830dbdb7	1717	/**
vcoubard	1184:1589830dbdb7	1718	* Construct a Gap instance.
vcoubard	1184:1589830dbdb7	1719	*/
vcoubard	1132:692ddf04fc42	1720	Gap() :
vcoubard	1132:692ddf04fc42	1721	_advParams(),
vcoubard	1132:692ddf04fc42	1722	_advPayload(),
vcoubard	1132:692ddf04fc42	1723	_scanningParams(),
vcoubard	1132:692ddf04fc42	1724	_scanResponse(),
vcoubard	1181:e11b058d005e	1725	connectionCount(0),
vcoubard	1132:692ddf04fc42	1726	state(),
vcoubard	1132:692ddf04fc42	1727	scanningActive(false),
vcoubard	1132:692ddf04fc42	1728	timeoutCallbackChain(),
vcoubard	1132:692ddf04fc42	1729	radioNotificationCallback(),
vcoubard	1132:692ddf04fc42	1730	onAdvertisementReport(),
vcoubard	1132:692ddf04fc42	1731	connectionCallChain(),
vcoubard	1132:692ddf04fc42	1732	disconnectionCallChain() {
vcoubard	1132:692ddf04fc42	1733	_advPayload.clear();
vcoubard	1132:692ddf04fc42	1734	_scanResponse.clear();
vcoubard	1132:692ddf04fc42	1735	}
vcoubard	1132:692ddf04fc42	1736
vcoubard	1132:692ddf04fc42	1737	/* Entry points for the underlying stack to report events back to the user. */
vcoubard	1132:692ddf04fc42	1738	public:
vcoubard	1184:1589830dbdb7	1739	/**
vcoubard	1184:1589830dbdb7	1740	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1184:1589830dbdb7	1741	* of a connection event. This function is meant to be called from the
vcoubard	1184:1589830dbdb7	1742	* BLE stack specific implementation when a connection event occurs.
vcoubard	1184:1589830dbdb7	1743	*
vcoubard	1184:1589830dbdb7	1744	* @param[in] handle
vcoubard	1184:1589830dbdb7	1745	* The ID of the connection that generated the event.
vcoubard	1184:1589830dbdb7	1746	* @param[in] role
vcoubard	1184:1589830dbdb7	1747	* The role of this BLE device in the connection.
vcoubard	1184:1589830dbdb7	1748	* @param[in] peerAddrType
vcoubard	1184:1589830dbdb7	1749	* The peer's BLE address type.
vcoubard	1184:1589830dbdb7	1750	* @param[in] peerAddr
vcoubard	1184:1589830dbdb7	1751	* The peer's BLE address.
vcoubard	1184:1589830dbdb7	1752	* @param[in] ownAddrType
vcoubard	1184:1589830dbdb7	1753	* This device's BLE address type.
vcoubard	1184:1589830dbdb7	1754	* @param[in] ownAddr
vcoubard	1184:1589830dbdb7	1755	* This device's BLE address.
vcoubard	1184:1589830dbdb7	1756	* @param[in] connectionParams
vcoubard	1184:1589830dbdb7	1757	* The parameters configured for this connection.
vcoubard	1184:1589830dbdb7	1758	*/
vcoubard	1136:22aada733dbd	1759	void processConnectionEvent(Handle_t handle,
vcoubard	1136:22aada733dbd	1760	Role_t role,
vcoubard	1136:22aada733dbd	1761	BLEProtocol::AddressType_t peerAddrType,
vcoubard	1136:22aada733dbd	1762	const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1136:22aada733dbd	1763	BLEProtocol::AddressType_t ownAddrType,
vcoubard	1136:22aada733dbd	1764	const BLEProtocol::AddressBytes_t ownAddr,
vcoubard	1136:22aada733dbd	1765	const ConnectionParams_t *connectionParams) {
vcoubard	1181:e11b058d005e	1766	/* Update Gap state */
vcoubard	1181:e11b058d005e	1767	state.advertising = 0;
vcoubard	1181:e11b058d005e	1768	state.connected = 1;
vcoubard	1181:e11b058d005e	1769	++connectionCount;
vcoubard	1181:e11b058d005e	1770
vcoubard	1132:692ddf04fc42	1771	ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
vcoubard	1132:692ddf04fc42	1772	connectionCallChain.call(&callbackParams);
vcoubard	1132:692ddf04fc42	1773	}
vcoubard	1132:692ddf04fc42	1774
vcoubard	1184:1589830dbdb7	1775	/**
vcoubard	1184:1589830dbdb7	1776	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1184:1589830dbdb7	1777	* of a disconnection event. This function is meant to be called from the
vcoubard	1184:1589830dbdb7	1778	* BLE stack specific implementation when a disconnection event occurs.
vcoubard	1184:1589830dbdb7	1779	*
vcoubard	1184:1589830dbdb7	1780	* @param[in] handle
vcoubard	1184:1589830dbdb7	1781	* The ID of the connection that generated the event.
vcoubard	1184:1589830dbdb7	1782	* @param[in] reason
vcoubard	1184:1589830dbdb7	1783	* The reason for disconnection.
vcoubard	1184:1589830dbdb7	1784	*/
vcoubard	1132:692ddf04fc42	1785	void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
vcoubard	1181:e11b058d005e	1786	/* Update Gap state */
vcoubard	1181:e11b058d005e	1787	--connectionCount;
vcoubard	1181:e11b058d005e	1788	if (!connectionCount) {
vcoubard	1181:e11b058d005e	1789	state.connected = 0;
vcoubard	1181:e11b058d005e	1790	}
vcoubard	1181:e11b058d005e	1791
vcoubard	1132:692ddf04fc42	1792	DisconnectionCallbackParams_t callbackParams(handle, reason);
vcoubard	1132:692ddf04fc42	1793	disconnectionCallChain.call(&callbackParams);
vcoubard	1132:692ddf04fc42	1794	}
vcoubard	1132:692ddf04fc42	1795
vcoubard	1184:1589830dbdb7	1796	/**
vcoubard	1184:1589830dbdb7	1797	* Helper function that notifies the registered handler of a scanned
vcoubard	1184:1589830dbdb7	1798	* advertisement packet. This function is meant to be called from the
vcoubard	1184:1589830dbdb7	1799	* BLE stack specific implementation when a such event occurs.
vcoubard	1184:1589830dbdb7	1800	*
vcoubard	1184:1589830dbdb7	1801	* @param[in] peerAddr
vcoubard	1184:1589830dbdb7	1802	* The peer's BLE address.
vcoubard	1184:1589830dbdb7	1803	* @param[in] rssi
vcoubard	1184:1589830dbdb7	1804	* The advertisement packet RSSI value.
vcoubard	1184:1589830dbdb7	1805	* @param[in] isScanReponse
vcoubard	1184:1589830dbdb7	1806	* Whether this packet is the response to a scan request.
vcoubard	1184:1589830dbdb7	1807	* @param[in] type
vcoubard	1184:1589830dbdb7	1808	* The type of advertisement.
vcoubard	1184:1589830dbdb7	1809	* @param[in] advertisingDataLen
vcoubard	1184:1589830dbdb7	1810	* Length of the advertisement data.
vcoubard	1184:1589830dbdb7	1811	* @param[in] advertisingData
vcoubard	1184:1589830dbdb7	1812	* Pointer to the advertisement packet's data.
vcoubard	1184:1589830dbdb7	1813	*/
vcoubard	1136:22aada733dbd	1814	void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1136:22aada733dbd	1815	int8_t rssi,
vcoubard	1136:22aada733dbd	1816	bool isScanResponse,
vcoubard	1132:692ddf04fc42	1817	GapAdvertisingParams::AdvertisingType_t type,
vcoubard	1136:22aada733dbd	1818	uint8_t advertisingDataLen,
vcoubard	1136:22aada733dbd	1819	const uint8_t *advertisingData) {
vcoubard	1132:692ddf04fc42	1820	AdvertisementCallbackParams_t params;
vcoubard	1132:692ddf04fc42	1821	memcpy(params.peerAddr, peerAddr, ADDR_LEN);
vcoubard	1132:692ddf04fc42	1822	params.rssi = rssi;
vcoubard	1132:692ddf04fc42	1823	params.isScanResponse = isScanResponse;
vcoubard	1132:692ddf04fc42	1824	params.type = type;
vcoubard	1132:692ddf04fc42	1825	params.advertisingDataLen = advertisingDataLen;
vcoubard	1132:692ddf04fc42	1826	params.advertisingData = advertisingData;
vcoubard	1132:692ddf04fc42	1827	onAdvertisementReport.call(&params);
vcoubard	1132:692ddf04fc42	1828	}
vcoubard	1132:692ddf04fc42	1829
vcoubard	1184:1589830dbdb7	1830	/**
vcoubard	1184:1589830dbdb7	1831	* Helper function that notifies all registered handlers of an occurrence
vcoubard	1184:1589830dbdb7	1832	* of a timeout event. This function is meant to be called from the
vcoubard	1184:1589830dbdb7	1833	* BLE stack specific implementation when a timeout event occurs.
vcoubard	1184:1589830dbdb7	1834	*
vcoubard	1184:1589830dbdb7	1835	* @param[in] source
vcoubard	1184:1589830dbdb7	1836	* The source of the timout event.
vcoubard	1184:1589830dbdb7	1837	*/
vcoubard	1132:692ddf04fc42	1838	void processTimeoutEvent(TimeoutSource_t source) {
vcoubard	1180:4ab722f8dca0	1839	if (source == TIMEOUT_SRC_ADVERTISING) {
vcoubard	1180:4ab722f8dca0	1840	/* Update gap state if the source is an advertising timeout */
vcoubard	1180:4ab722f8dca0	1841	state.advertising = 0;
vcoubard	1180:4ab722f8dca0	1842	}
vcoubard	1132:692ddf04fc42	1843	if (timeoutCallbackChain) {
vcoubard	1132:692ddf04fc42	1844	timeoutCallbackChain(source);
vcoubard	1132:692ddf04fc42	1845	}
vcoubard	1132:692ddf04fc42	1846	}
vcoubard	1132:692ddf04fc42	1847
vcoubard	1132:692ddf04fc42	1848	protected:
vcoubard	1184:1589830dbdb7	1849	/**
vcoubard	1184:1589830dbdb7	1850	* Currently set advertising parameters.
vcoubard	1184:1589830dbdb7	1851	*/
vcoubard	1132:692ddf04fc42	1852	GapAdvertisingParams _advParams;
vcoubard	1184:1589830dbdb7	1853	/**
vcoubard	1184:1589830dbdb7	1854	* Currently set advertising data.
vcoubard	1184:1589830dbdb7	1855	*/
vcoubard	1132:692ddf04fc42	1856	GapAdvertisingData _advPayload;
vcoubard	1184:1589830dbdb7	1857	/**
vcoubard	1184:1589830dbdb7	1858	* Currently set scanning parameters.
vcoubard	1184:1589830dbdb7	1859	*/
vcoubard	1132:692ddf04fc42	1860	GapScanningParams _scanningParams;
vcoubard	1184:1589830dbdb7	1861	/**
vcoubard	1184:1589830dbdb7	1862	* Currently set scan response data.
vcoubard	1184:1589830dbdb7	1863	*/
vcoubard	1132:692ddf04fc42	1864	GapAdvertisingData _scanResponse;
vcoubard	1132:692ddf04fc42	1865
vcoubard	1181:e11b058d005e	1866	/**
vcoubard	1181:e11b058d005e	1867	* Total number of open connections.
vcoubard	1181:e11b058d005e	1868	*/
vcoubard	1181:e11b058d005e	1869	uint8_t connectionCount;
vcoubard	1184:1589830dbdb7	1870	/**
vcoubard	1184:1589830dbdb7	1871	* The current GAP state.
vcoubard	1184:1589830dbdb7	1872	*/
vcoubard	1132:692ddf04fc42	1873	GapState_t state;
vcoubard	1184:1589830dbdb7	1874	/**
vcoubard	1184:1589830dbdb7	1875	* Whether active scanning is set. This is used to fetch the scan response
vcoubard	1184:1589830dbdb7	1876	* from a peer if possible.
vcoubard	1184:1589830dbdb7	1877	*/
vcoubard	1132:692ddf04fc42	1878	bool scanningActive;
vcoubard	1132:692ddf04fc42	1879
vcoubard	1132:692ddf04fc42	1880	protected:
vcoubard	1184:1589830dbdb7	1881	/**
vcoubard	1184:1589830dbdb7	1882	* Callchain containing all registered callback handlers for timeout
vcoubard	1184:1589830dbdb7	1883	* events.
vcoubard	1184:1589830dbdb7	1884	*/
vcoubard	1132:692ddf04fc42	1885	TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard	1184:1589830dbdb7	1886	/**
vcoubard	1184:1589830dbdb7	1887	* The registered callback handler for radio notification events.
vcoubard	1184:1589830dbdb7	1888	*/
vcoubard	1132:692ddf04fc42	1889	RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard	1184:1589830dbdb7	1890	/**
vcoubard	1184:1589830dbdb7	1891	* The registered callback handler for scanned advertisement packet
vcoubard	1184:1589830dbdb7	1892	* notifications.
vcoubard	1184:1589830dbdb7	1893	*/
vcoubard	1132:692ddf04fc42	1894	AdvertisementReportCallback_t onAdvertisementReport;
vcoubard	1184:1589830dbdb7	1895	/**
vcoubard	1184:1589830dbdb7	1896	* Callchain containing all registered callback handlers for connection
vcoubard	1184:1589830dbdb7	1897	* events.
vcoubard	1184:1589830dbdb7	1898	*/
vcoubard	1132:692ddf04fc42	1899	ConnectionEventCallbackChain_t connectionCallChain;
vcoubard	1184:1589830dbdb7	1900	/**
vcoubard	1184:1589830dbdb7	1901	* Callchain containing all registered callback handlers for disconnection
vcoubard	1184:1589830dbdb7	1902	* events.
vcoubard	1184:1589830dbdb7	1903	*/
vcoubard	1132:692ddf04fc42	1904	DisconnectionEventCallbackChain_t disconnectionCallChain;
vcoubard	1132:692ddf04fc42	1905
vcoubard	1132:692ddf04fc42	1906	private:
vcoubard	1184:1589830dbdb7	1907	/**
vcoubard	1184:1589830dbdb7	1908	* Callchain containing all registered callback handlers for shutdown
vcoubard	1184:1589830dbdb7	1909	* events.
vcoubard	1184:1589830dbdb7	1910	*/
vcoubard	1136:22aada733dbd	1911	GapShutdownCallbackChain_t shutdownCallChain;
vcoubard	1136:22aada733dbd	1912
vcoubard	1136:22aada733dbd	1913	private:
vcoubard	1132:692ddf04fc42	1914	/* Disallow copy and assignment. */
vcoubard	1132:692ddf04fc42	1915	Gap(const Gap &);
vcoubard	1132:692ddf04fc42	1916	Gap& operator=(const Gap &);
vcoubard	1132:692ddf04fc42	1917	};
vcoubard	1132:692ddf04fc42	1918
rgrover1	710:b2e1a2660ec2	1919	#endif // ifndef __GAP_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	16 Apr 2016
Imports:	0
Forks:	1
Commits:	1202
Dependents:	0
Dependencies:	0
Followers:	1

ble/Gap.h@1194:c8bbf3a6712d, 2016-04-06 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning