BLE_API - Bike service

Users » ptuytsch » Code » BLE_API

Bike service

Fork of BLE_API by Bluetooth Low Energy

ble/BLE.h@1145:249843612f87, 2016-04-06 (annotated)

Committer:: vcoubard
Date:: Wed Apr 06 19:14:12 2016 +0100
Revision:: 1145:249843612f87
Parent:: 1143:a358d0d20f62
Child:: 1156:e28c7aac64ab

Synchronized with git rev e872784f

Author: Andres Amaya Garcia

Add @deprecated doxy tag where relevant in BLE.h

Who changed what in which revision?

User	Revision	Line number	New contents of line
vcoubard	1132:692ddf04fc42	1	/* mbed Microcontroller Library
vcoubard	1132:692ddf04fc42	2	* Copyright (c) 2006-2013 ARM Limited
vcoubard	1132:692ddf04fc42	3	*
vcoubard	1132:692ddf04fc42	4	* Licensed under the Apache License, Version 2.0 (the "License");
vcoubard	1132:692ddf04fc42	5	* you may not use this file except in compliance with the License.
vcoubard	1132:692ddf04fc42	6	* You may obtain a copy of the License at
vcoubard	1132:692ddf04fc42	7	*
vcoubard	1132:692ddf04fc42	8	* http://www.apache.org/licenses/LICENSE-2.0
vcoubard	1132:692ddf04fc42	9	*
vcoubard	1132:692ddf04fc42	10	* Unless required by applicable law or agreed to in writing, software
vcoubard	1132:692ddf04fc42	11	* distributed under the License is distributed on an "AS IS" BASIS,
vcoubard	1132:692ddf04fc42	12	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
vcoubard	1132:692ddf04fc42	13	* See the License for the specific language governing permissions and
vcoubard	1132:692ddf04fc42	14	* limitations under the License.
vcoubard	1132:692ddf04fc42	15	*/
vcoubard	1132:692ddf04fc42	16
vcoubard	1132:692ddf04fc42	17	#ifndef __BLE_H__
vcoubard	1132:692ddf04fc42	18	#define __BLE_H__
vcoubard	1132:692ddf04fc42	19
vcoubard	1132:692ddf04fc42	20	#include "blecommon.h"
vcoubard	1132:692ddf04fc42	21	#include "Gap.h"
vcoubard	1132:692ddf04fc42	22	#include "GattServer.h"
vcoubard	1132:692ddf04fc42	23	#include "GattClient.h"
vcoubard	1132:692ddf04fc42	24
vcoubard	1132:692ddf04fc42	25	#include "ble/FunctionPointerWithContext.h"
vcoubard	1132:692ddf04fc42	26
vcoubard	1132:692ddf04fc42	27	#ifdef YOTTA_CFG_MBED_OS
vcoubard	1132:692ddf04fc42	28	#include "mbed-drivers/mbed_error.h"
vcoubard	1132:692ddf04fc42	29	#else
vcoubard	1132:692ddf04fc42	30	#include "mbed_error.h"
vcoubard	1132:692ddf04fc42	31	#endif
vcoubard	1132:692ddf04fc42	32
vcoubard	1132:692ddf04fc42	33	/* Forward declaration for the implementation class */
vcoubard	1132:692ddf04fc42	34	class BLEInstanceBase;
vcoubard	1132:692ddf04fc42	35
vcoubard	1132:692ddf04fc42	36	/**
vcoubard	1132:692ddf04fc42	37	* The base class used to abstract away BLE-capable radio transceivers or SOCs,
vcoubard	1132:692ddf04fc42	38	* so that the BLE API can work with any radio transparently.
vcoubard	1132:692ddf04fc42	39	*/
vcoubard	1132:692ddf04fc42	40	class BLE
vcoubard	1132:692ddf04fc42	41	{
vcoubard	1132:692ddf04fc42	42	public:
vcoubard	1142:510f5d2d2732	43	typedef unsigned InstanceID_t; /*< The type returned by BLE::getInstanceID(). /
vcoubard	1132:692ddf04fc42	44
vcoubard	1132:692ddf04fc42	45	/**
vcoubard	1132:692ddf04fc42	46	* The context provided to init-completion-callbacks (see init() below).
vcoubard	1132:692ddf04fc42	47	*
vcoubard	1132:692ddf04fc42	48	* @param ble
vcoubard	1132:692ddf04fc42	49	* A reference to the BLE instance being initialized.
vcoubard	1132:692ddf04fc42	50	* @param error
vcoubard	1132:692ddf04fc42	51	* Captures the result of initialization. It is set to
vcoubard	1132:692ddf04fc42	52	* BLE_ERROR_NONE if initialization completed successfully. Else
vcoubard	1132:692ddf04fc42	53	* the error value is implementation specific.
vcoubard	1132:692ddf04fc42	54	*/
vcoubard	1132:692ddf04fc42	55	struct InitializationCompleteCallbackContext {
vcoubard	1142:510f5d2d2732	56	BLE& ble; /*< Reference to the BLE object that has been initialized /
vcoubard	1142:510f5d2d2732	57	ble_error_t error; /*< Error status of the initialization. It is set to BLE_ERROR_NONE if initialization completed successfully. /
vcoubard	1132:692ddf04fc42	58	};
vcoubard	1132:692ddf04fc42	59
vcoubard	1132:692ddf04fc42	60	/**
vcoubard	1132:692ddf04fc42	61	* The signature for function-pointer like callbacks for initialization-completion.
vcoubard	1132:692ddf04fc42	62	*
vcoubard	1132:692ddf04fc42	63	* @note There are two versions of init(). In addition to the simple
vcoubard	1132:692ddf04fc42	64	* function-pointer, init() can also take a <Object, member> tuple as its
vcoubard	1132:692ddf04fc42	65	* callback target. In case of the latter, the following declaration doesn't apply.
vcoubard	1132:692ddf04fc42	66	*/
vcoubard	1132:692ddf04fc42	67	typedef void (InitializationCompleteCallback_t)(InitializationCompleteCallbackContext context);
vcoubard	1132:692ddf04fc42	68
vcoubard	1132:692ddf04fc42	69	/**
vcoubard	1132:692ddf04fc42	70	* Initialize the BLE controller. This should be called before using
vcoubard	1143:a358d0d20f62	71	* anything else in the BLE API.
vcoubard	1132:692ddf04fc42	72	*
vcoubard	1132:692ddf04fc42	73	* init() hands control to the underlying BLE module to accomplish
vcoubard	1132:692ddf04fc42	74	* initialization. This initialization may tacitly depend on other hardware
vcoubard	1132:692ddf04fc42	75	* setup (such as clocks or power-modes) that happens early on during
vcoubard	1132:692ddf04fc42	76	* system startup. It may not be safe to call init() from a global static
vcoubard	1132:692ddf04fc42	77	* context where ordering is compiler-specific and can't be guaranteed - it
vcoubard	1132:692ddf04fc42	78	* is safe to call BLE::init() from within main().
vcoubard	1132:692ddf04fc42	79	*
vcoubard	1132:692ddf04fc42	80	* @param initCompleteCallback
vcoubard	1132:692ddf04fc42	81	* A callback for when initialization completes for a BLE
vcoubard	1132:692ddf04fc42	82	* instance. This is an optional parameter; if no callback is
vcoubard	1132:692ddf04fc42	83	* set up the application can still determine the status of
vcoubard	1132:692ddf04fc42	84	* initialization using BLE::hasInitialized() (see below).
vcoubard	1132:692ddf04fc42	85	*
vcoubard	1132:692ddf04fc42	86	* @return BLE_ERROR_NONE if the initialization procedure was started
vcoubard	1132:692ddf04fc42	87	* successfully.
vcoubard	1132:692ddf04fc42	88	*
vcoubard	1132:692ddf04fc42	89	* @note If init() returns BLE_ERROR_NONE, the underlying stack must invoke
vcoubard	1132:692ddf04fc42	90	* the initialization completion callback at some point.
vcoubard	1132:692ddf04fc42	91	*
vcoubard	1132:692ddf04fc42	92	* @note In some cases, initialization is instantaneous (or blocking); if
vcoubard	1132:692ddf04fc42	93	* so, it is acceptable for the stack-specific implementation of init()
vcoubard	1132:692ddf04fc42	94	* to invoke the completion callback directly (within its own
vcoubard	1132:692ddf04fc42	95	* context).
vcoubard	1132:692ddf04fc42	96	*
vcoubard	1132:692ddf04fc42	97	* @note Nearly all BLE APIs would return
vcoubard	1132:692ddf04fc42	98	* BLE_ERROR_INITIALIZATION_INCOMPLETE if used on an instance before the
vcoubard	1132:692ddf04fc42	99	* corresponding transport is initialized.
vcoubard	1132:692ddf04fc42	100	*
vcoubard	1132:692ddf04fc42	101	* @note There are two versions of init(). In addition to the simple
vcoubard	1132:692ddf04fc42	102	* function-pointer, init() can also take an <Object, member> tuple as its
vcoubard	1132:692ddf04fc42	103	* callback target.
vcoubard	1132:692ddf04fc42	104	*/
vcoubard	1132:692ddf04fc42	105	ble_error_t init(InitializationCompleteCallback_t initCompleteCallback = NULL) {
vcoubard	1132:692ddf04fc42	106	FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(initCompleteCallback);
vcoubard	1132:692ddf04fc42	107	return initImplementation(callback);
vcoubard	1132:692ddf04fc42	108	}
vcoubard	1132:692ddf04fc42	109
vcoubard	1132:692ddf04fc42	110	/**
vcoubard	1132:692ddf04fc42	111	* An alternate declaration for init(). This one takes an <Object, member> tuple as its
vcoubard	1132:692ddf04fc42	112	* callback target.
vcoubard	1132:692ddf04fc42	113	*/
vcoubard	1132:692ddf04fc42	114	template<typename T>
vcoubard	1132:692ddf04fc42	115	ble_error_t init(T object, void (T::initCompleteCallback)(InitializationCompleteCallbackContext *context)) {
vcoubard	1132:692ddf04fc42	116	FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback(object, initCompleteCallback);
vcoubard	1132:692ddf04fc42	117	return initImplementation(callback);
vcoubard	1132:692ddf04fc42	118	}
vcoubard	1132:692ddf04fc42	119
vcoubard	1132:692ddf04fc42	120	/**
vcoubard	1132:692ddf04fc42	121	* @return true if initialization has completed for the underlying BLE
vcoubard	1132:692ddf04fc42	122	* transport.
vcoubard	1132:692ddf04fc42	123	*
vcoubard	1132:692ddf04fc42	124	* The application can set up a callback to signal completion of
vcoubard	1132:692ddf04fc42	125	* initialization when using init(). Otherwise, this method can be used to
vcoubard	1132:692ddf04fc42	126	* poll the state of initialization.
vcoubard	1132:692ddf04fc42	127	*/
vcoubard	1132:692ddf04fc42	128	bool hasInitialized(void) const;
vcoubard	1132:692ddf04fc42	129
vcoubard	1132:692ddf04fc42	130	/**
vcoubard	1132:692ddf04fc42	131	* Purge the BLE stack of GATT and GAP state. init() must be called
vcoubard	1132:692ddf04fc42	132	* afterwards to re-instate services and GAP state. This API offers a way to
vcoubard	1132:692ddf04fc42	133	* repopulate the GATT database with new services and characteristics.
vcoubard	1132:692ddf04fc42	134	*/
vcoubard	1132:692ddf04fc42	135	ble_error_t shutdown(void);
vcoubard	1132:692ddf04fc42	136
vcoubard	1132:692ddf04fc42	137	/**
vcoubard	1132:692ddf04fc42	138	* This call allows the application to get the BLE stack version information.
vcoubard	1132:692ddf04fc42	139	*
vcoubard	1132:692ddf04fc42	140	* @return A pointer to a const string representing the version.
vcoubard	1142:510f5d2d2732	141	*
vcoubard	1143:a358d0d20f62	142	* @note The string returned is owned by BLE API.
vcoubard	1132:692ddf04fc42	143	*/
vcoubard	1132:692ddf04fc42	144	const char *getVersion(void);
vcoubard	1132:692ddf04fc42	145
vcoubard	1143:a358d0d20f62	146	/**
vcoubard	1143:a358d0d20f62	147	* Accessor to Gap. All Gap related functionality requires
vcoubard	1132:692ddf04fc42	148	* going through this accessor.
vcoubard	1143:a358d0d20f62	149	*
vcoubard	1143:a358d0d20f62	150	* @return A reference to a Gap object associated to this BLE instance.
vcoubard	1143:a358d0d20f62	151	*/
vcoubard	1143:a358d0d20f62	152	Gap &gap();
vcoubard	1143:a358d0d20f62	153
vcoubard	1143:a358d0d20f62	154	/**
vcoubard	1143:a358d0d20f62	155	* A const alternative to gap().
vcoubard	1143:a358d0d20f62	156	*
vcoubard	1143:a358d0d20f62	157	* @return A const reference to a Gap object associated to this BLE instance.
vcoubard	1132:692ddf04fc42	158	*/
vcoubard	1132:692ddf04fc42	159	const Gap &gap() const;
vcoubard	1132:692ddf04fc42	160
vcoubard	1143:a358d0d20f62	161	/**
vcoubard	1143:a358d0d20f62	162	* Accessor to GattServer. All GattServer related functionality requires
vcoubard	1143:a358d0d20f62	163	* going through this accessor.
vcoubard	1143:a358d0d20f62	164	*
vcoubard	1143:a358d0d20f62	165	* @return A reference to a GattServer object associated to this BLE instance.
vcoubard	1132:692ddf04fc42	166	*/
vcoubard	1132:692ddf04fc42	167	GattServer& gattServer();
vcoubard	1132:692ddf04fc42	168
vcoubard	1143:a358d0d20f62	169	/**
vcoubard	1143:a358d0d20f62	170	* A const alternative to gattServer().
vcoubard	1143:a358d0d20f62	171	*
vcoubard	1143:a358d0d20f62	172	* @return A const reference to a GattServer object associated to this BLE instance.
vcoubard	1132:692ddf04fc42	173	*/
vcoubard	1143:a358d0d20f62	174	const GattServer& gattServer() const;
vcoubard	1143:a358d0d20f62	175
vcoubard	1143:a358d0d20f62	176	/**
vcoubard	1143:a358d0d20f62	177	* Accessors to GattClient. All GattClient related functionality requires going
vcoubard	1143:a358d0d20f62	178	* through this accessor.
vcoubard	1143:a358d0d20f62	179	*
vcoubard	1143:a358d0d20f62	180	* @return A reference to a GattClient object associated to this BLE instance.
vcoubard	1143:a358d0d20f62	181	*/
vcoubard	1132:692ddf04fc42	182	GattClient& gattClient();
vcoubard	1132:692ddf04fc42	183
vcoubard	1143:a358d0d20f62	184	/**
vcoubard	1143:a358d0d20f62	185	* A const alternative to gattClient().
vcoubard	1143:a358d0d20f62	186	*
vcoubard	1143:a358d0d20f62	187	* @return A const reference to a GattClient object associated to this BLE instance.
vcoubard	1143:a358d0d20f62	188	*/
vcoubard	1143:a358d0d20f62	189	const GattClient& gattClient() const;
vcoubard	1143:a358d0d20f62	190
vcoubard	1143:a358d0d20f62	191	/**
vcoubard	1143:a358d0d20f62	192	* Accessors to SecurityManager. All SecurityManager related functionality requires
vcoubard	1143:a358d0d20f62	193	* going through this accessor.
vcoubard	1143:a358d0d20f62	194	*
vcoubard	1143:a358d0d20f62	195	* @return A reference to a SecurityManager object associated to this BLE instance.
vcoubard	1143:a358d0d20f62	196	*/
vcoubard	1143:a358d0d20f62	197	SecurityManager& securityManager();
vcoubard	1143:a358d0d20f62	198
vcoubard	1143:a358d0d20f62	199	/**
vcoubard	1143:a358d0d20f62	200	* A const alternative to securityManager().
vcoubard	1143:a358d0d20f62	201	*
vcoubard	1143:a358d0d20f62	202	* @return A const reference to a SecurityManager object associated to this BLE instance.
vcoubard	1132:692ddf04fc42	203	*/
vcoubard	1132:692ddf04fc42	204	const SecurityManager& securityManager() const;
vcoubard	1132:692ddf04fc42	205
vcoubard	1132:692ddf04fc42	206	/**
vcoubard	1132:692ddf04fc42	207	* Yield control to the BLE stack or to other tasks waiting for events. This
vcoubard	1132:692ddf04fc42	208	* is a sleep function that will return when there is an application-specific
vcoubard	1132:692ddf04fc42	209	* interrupt, but the MCU might wake up several times before
vcoubard	1132:692ddf04fc42	210	* returning (to service the stack). This is not always interchangeable with
vcoubard	1132:692ddf04fc42	211	* WFE().
vcoubard	1132:692ddf04fc42	212	*/
vcoubard	1132:692ddf04fc42	213	void waitForEvent(void);
vcoubard	1132:692ddf04fc42	214
vcoubard	1132:692ddf04fc42	215	public:
vcoubard	1143:a358d0d20f62	216	/**
vcoubard	1143:a358d0d20f62	217	* The value of the BLE::InstanceID_t for the default BLE instance.
vcoubard	1143:a358d0d20f62	218	*/
vcoubard	1132:692ddf04fc42	219	static const InstanceID_t DEFAULT_INSTANCE = 0;
vcoubard	1132:692ddf04fc42	220	#ifndef YOTTA_CFG_BLE_INSTANCES_COUNT
vcoubard	1143:a358d0d20f62	221	/**
vcoubard	1143:a358d0d20f62	222	* The number of permitted BLE instances for the application.
vcoubard	1143:a358d0d20f62	223	*/
vcoubard	1132:692ddf04fc42	224	static const InstanceID_t NUM_INSTANCES = 1;
vcoubard	1132:692ddf04fc42	225	#else
vcoubard	1143:a358d0d20f62	226	/**
vcoubard	1143:a358d0d20f62	227	* The number of permitted BLE instances for the application.
vcoubard	1143:a358d0d20f62	228	*/
vcoubard	1132:692ddf04fc42	229	static const InstanceID_t NUM_INSTANCES = YOTTA_CFG_BLE_INSTANCES_COUNT;
vcoubard	1132:692ddf04fc42	230	#endif
vcoubard	1132:692ddf04fc42	231
vcoubard	1132:692ddf04fc42	232	/**
vcoubard	1132:692ddf04fc42	233	* Get a reference to the BLE singleton corresponding to a given interface.
vcoubard	1132:692ddf04fc42	234	* There is a static array of BLE singletons.
vcoubard	1132:692ddf04fc42	235	*
vcoubard	1143:a358d0d20f62	236	* @note Calling Instance() is preferred over constructing a BLE object
vcoubard	1132:692ddf04fc42	237	* directly, as it returns references to singletons.
vcoubard	1132:692ddf04fc42	238	*
vcoubard	1132:692ddf04fc42	239	* @param[in] id
vcoubard	1136:22aada733dbd	240	* Instance-ID. This should be less than NUM_INSTANCES
vcoubard	1132:692ddf04fc42	241	* for the returned BLE singleton to be useful.
vcoubard	1132:692ddf04fc42	242	*
vcoubard	1143:a358d0d20f62	243	* @return A reference to a single object.
vcoubard	1132:692ddf04fc42	244	*/
vcoubard	1132:692ddf04fc42	245	static BLE &Instance(InstanceID_t id = DEFAULT_INSTANCE);
vcoubard	1132:692ddf04fc42	246
vcoubard	1132:692ddf04fc42	247	/**
vcoubard	1132:692ddf04fc42	248	* Constructor for a handle to a BLE instance (the BLE stack). BLE handles
vcoubard	1132:692ddf04fc42	249	* are thin wrappers around a transport object (that is, ptr. to
vcoubard	1132:692ddf04fc42	250	* BLEInstanceBase).
vcoubard	1132:692ddf04fc42	251	*
vcoubard	1132:692ddf04fc42	252	* It is better to create BLE objects as singletons accessed through the
vcoubard	1132:692ddf04fc42	253	* Instance() method. If multiple BLE handles are constructed for the same
vcoubard	1132:692ddf04fc42	254	* interface (using this constructor), they will share the same underlying
vcoubard	1132:692ddf04fc42	255	* transport object.
vcoubard	1132:692ddf04fc42	256	*/
vcoubard	1132:692ddf04fc42	257	BLE(InstanceID_t instanceID = DEFAULT_INSTANCE);
vcoubard	1132:692ddf04fc42	258
vcoubard	1132:692ddf04fc42	259	/**
vcoubard	1132:692ddf04fc42	260	* Fetch the ID of a BLE instance. Typically there would only be the DEFAULT_INSTANCE.
vcoubard	1132:692ddf04fc42	261	*/
vcoubard	1132:692ddf04fc42	262	InstanceID_t getInstanceID(void) const {
vcoubard	1132:692ddf04fc42	263	return instanceID;
vcoubard	1132:692ddf04fc42	264	}
vcoubard	1132:692ddf04fc42	265
vcoubard	1132:692ddf04fc42	266	/*
vcoubard	1132:692ddf04fc42	267	* Deprecation alert!
vcoubard	1132:692ddf04fc42	268	* All of the following are deprecated and may be dropped in a future
vcoubard	1132:692ddf04fc42	269	* release. Documentation should refer to alternative APIs.
vcoubard	1132:692ddf04fc42	270	*/
vcoubard	1132:692ddf04fc42	271
vcoubard	1132:692ddf04fc42	272	/* GAP specific APIs. */
vcoubard	1132:692ddf04fc42	273	public:
vcoubard	1132:692ddf04fc42	274	/**
vcoubard	1132:692ddf04fc42	275	* Set the BTLE MAC address and type.
vcoubard	1132:692ddf04fc42	276	* @return BLE_ERROR_NONE on success.
vcoubard	1132:692ddf04fc42	277	*
vcoubard	1145:249843612f87	278	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	279	* ble.setAddress(...) should be replaced with
vcoubard	1145:249843612f87	280	* ble.gap().setAddress(...).
vcoubard	1132:692ddf04fc42	281	*/
vcoubard	1136:22aada733dbd	282	ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
vcoubard	1132:692ddf04fc42	283	return gap().setAddress(type, address);
vcoubard	1132:692ddf04fc42	284	}
vcoubard	1132:692ddf04fc42	285
vcoubard	1132:692ddf04fc42	286	/**
vcoubard	1143:a358d0d20f62	287	* Fetch the Bluetooth Low Energy MAC address and type.
vcoubard	1132:692ddf04fc42	288	* @return BLE_ERROR_NONE on success.
vcoubard	1132:692ddf04fc42	289	*
vcoubard	1145:249843612f87	290	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	291	* ble.getAddress(...) should be replaced with
vcoubard	1145:249843612f87	292	* ble.gap().getAddress(...).
vcoubard	1132:692ddf04fc42	293	*/
vcoubard	1136:22aada733dbd	294	ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
vcoubard	1132:692ddf04fc42	295	return gap().getAddress(typeP, address);
vcoubard	1132:692ddf04fc42	296	}
vcoubard	1132:692ddf04fc42	297
vcoubard	1132:692ddf04fc42	298	/**
vcoubard	1132:692ddf04fc42	299	* Set the GAP advertising mode to use for this device.
vcoubard	1132:692ddf04fc42	300	*
vcoubard	1145:249843612f87	301	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	302	* ble.setAdvertisingType(...) should be replaced with
vcoubard	1145:249843612f87	303	* ble.gap().setAdvertisingType(...).
vcoubard	1132:692ddf04fc42	304	*/
vcoubard	1132:692ddf04fc42	305	void setAdvertisingType(GapAdvertisingParams::AdvertisingType advType) {
vcoubard	1132:692ddf04fc42	306	gap().setAdvertisingType(advType);
vcoubard	1132:692ddf04fc42	307	}
vcoubard	1132:692ddf04fc42	308
vcoubard	1132:692ddf04fc42	309	/**
vcoubard	1132:692ddf04fc42	310	* @param[in] interval
vcoubard	1132:692ddf04fc42	311	* Advertising interval in units of milliseconds. Advertising
vcoubard	1132:692ddf04fc42	312	* is disabled if interval is 0. If interval is smaller than
vcoubard	1132:692ddf04fc42	313	* the minimum supported value, then the minimum supported
vcoubard	1132:692ddf04fc42	314	* value is used instead. This minimum value can be discovered
vcoubard	1132:692ddf04fc42	315	* using getMinAdvertisingInterval().
vcoubard	1132:692ddf04fc42	316	*
vcoubard	1132:692ddf04fc42	317	* This field must be set to 0 if connectionMode is equal
vcoubard	1132:692ddf04fc42	318	* to ADV_CONNECTABLE_DIRECTED.
vcoubard	1132:692ddf04fc42	319	*
vcoubard	1143:a358d0d20f62	320	* @note Decreasing this value allows central devices to detect a
vcoubard	1132:692ddf04fc42	321	* peripheral faster, at the expense of more power being used by the radio
vcoubard	1132:692ddf04fc42	322	* due to the higher data transmit rate.
vcoubard	1132:692ddf04fc42	323	*
vcoubard	1145:249843612f87	324	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	325	* ble.setAdvertisingInterval(...) should be replaced with
vcoubard	1145:249843612f87	326	* ble.gap().setAdvertisingInterval(...).
vcoubard	1132:692ddf04fc42	327	*
vcoubard	1143:a358d0d20f62	328	* @note WARNING: This API previously used 0.625ms as the unit for its
vcoubard	1132:692ddf04fc42	329	* 'interval' argument. That required an explicit conversion from
vcoubard	1132:692ddf04fc42	330	* milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
vcoubard	1132:692ddf04fc42	331	* no longer required as the new units are milliseconds. Any application
vcoubard	1132:692ddf04fc42	332	* code depending on the old semantics needs to be updated accordingly.
vcoubard	1132:692ddf04fc42	333	*/
vcoubard	1132:692ddf04fc42	334	void setAdvertisingInterval(uint16_t interval) {
vcoubard	1132:692ddf04fc42	335	gap().setAdvertisingInterval(interval);
vcoubard	1132:692ddf04fc42	336	}
vcoubard	1132:692ddf04fc42	337
vcoubard	1132:692ddf04fc42	338	/**
vcoubard	1132:692ddf04fc42	339	* @return Minimum Advertising interval in milliseconds.
vcoubard	1132:692ddf04fc42	340	*
vcoubard	1145:249843612f87	341	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	342	* ble.getMinAdvertisingInterval(...) should be replaced with
vcoubard	1145:249843612f87	343	* ble.gap().getMinAdvertisingInterval(...).
vcoubard	1132:692ddf04fc42	344	*/
vcoubard	1132:692ddf04fc42	345	uint16_t getMinAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	346	return gap().getMinAdvertisingInterval();
vcoubard	1132:692ddf04fc42	347	}
vcoubard	1132:692ddf04fc42	348
vcoubard	1132:692ddf04fc42	349	/**
vcoubard	1132:692ddf04fc42	350	* @return Minimum Advertising interval in milliseconds for non-connectible mode.
vcoubard	1132:692ddf04fc42	351	*
vcoubard	1145:249843612f87	352	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	353	* ble.getMinNonConnectableAdvertisingInterval(...) should be replaced with
vcoubard	1145:249843612f87	354	* ble.gap().getMinNonConnectableAdvertisingInterval(...).
vcoubard	1132:692ddf04fc42	355	*/
vcoubard	1132:692ddf04fc42	356	uint16_t getMinNonConnectableAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	357	return gap().getMinNonConnectableAdvertisingInterval();
vcoubard	1132:692ddf04fc42	358	}
vcoubard	1132:692ddf04fc42	359
vcoubard	1132:692ddf04fc42	360	/**
vcoubard	1132:692ddf04fc42	361	* @return Maximum Advertising interval in milliseconds.
vcoubard	1132:692ddf04fc42	362	*
vcoubard	1145:249843612f87	363	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	364	* ble.getMaxAdvertisingInterval(...) should be replaced with
vcoubard	1145:249843612f87	365	* ble.gap().getMaxAdvertisingInterval(...).
vcoubard	1132:692ddf04fc42	366	*/
vcoubard	1132:692ddf04fc42	367	uint16_t getMaxAdvertisingInterval(void) const {
vcoubard	1132:692ddf04fc42	368	return gap().getMaxAdvertisingInterval();
vcoubard	1132:692ddf04fc42	369	}
vcoubard	1132:692ddf04fc42	370
vcoubard	1132:692ddf04fc42	371	/**
vcoubard	1132:692ddf04fc42	372	* @param[in] timeout
vcoubard	1132:692ddf04fc42	373	* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
vcoubard	1132:692ddf04fc42	374	* and 16383). Use 0 to disable the advertising timeout.
vcoubard	1132:692ddf04fc42	375	*
vcoubard	1145:249843612f87	376	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	377	* ble.setAdvertisingTimeout(...) should be replaced with
vcoubard	1145:249843612f87	378	* ble.gap().setAdvertisingTimeout(...).
vcoubard	1132:692ddf04fc42	379	*/
vcoubard	1132:692ddf04fc42	380	void setAdvertisingTimeout(uint16_t timeout) {
vcoubard	1132:692ddf04fc42	381	gap().setAdvertisingTimeout(timeout);
vcoubard	1132:692ddf04fc42	382	}
vcoubard	1132:692ddf04fc42	383
vcoubard	1132:692ddf04fc42	384	/**
vcoubard	1132:692ddf04fc42	385	* Set up a particular, user-constructed set of advertisement parameters for
vcoubard	1132:692ddf04fc42	386	* the underlying stack. It would be uncommon for this API to be used
vcoubard	1132:692ddf04fc42	387	* directly; there are other APIs to tweak advertisement parameters
vcoubard	1132:692ddf04fc42	388	* individually (see above).
vcoubard	1132:692ddf04fc42	389	*
vcoubard	1145:249843612f87	390	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	391	* ble.setAdvertisingParams(...) should be replaced with
vcoubard	1145:249843612f87	392	* ble.gap().setAdvertisingParams(...).
vcoubard	1132:692ddf04fc42	393	*/
vcoubard	1132:692ddf04fc42	394	void setAdvertisingParams(const GapAdvertisingParams &advParams) {
vcoubard	1132:692ddf04fc42	395	gap().setAdvertisingParams(advParams);
vcoubard	1132:692ddf04fc42	396	}
vcoubard	1132:692ddf04fc42	397
vcoubard	1132:692ddf04fc42	398	/**
vcoubard	1132:692ddf04fc42	399	* @return Read back advertising parameters. Useful for storing and
vcoubard	1132:692ddf04fc42	400	* restoring parameters rapidly.
vcoubard	1132:692ddf04fc42	401	*
vcoubard	1145:249843612f87	402	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	403	* ble.getAdvertisingParams(...) should be replaced with
vcoubard	1145:249843612f87	404	* ble.gap().getAdvertisingParams(...).
vcoubard	1132:692ddf04fc42	405	*/
vcoubard	1132:692ddf04fc42	406	const GapAdvertisingParams &getAdvertisingParams(void) const {
vcoubard	1132:692ddf04fc42	407	return gap().getAdvertisingParams();
vcoubard	1132:692ddf04fc42	408	}
vcoubard	1132:692ddf04fc42	409
vcoubard	1132:692ddf04fc42	410	/**
vcoubard	1132:692ddf04fc42	411	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	412	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	413	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	414	* small.
vcoubard	1132:692ddf04fc42	415	*
vcoubard	1132:692ddf04fc42	416	* @param[in] flags
vcoubard	1132:692ddf04fc42	417	* The flags to add. Please refer to
vcoubard	1132:692ddf04fc42	418	* GapAdvertisingData::Flags for valid flags. Multiple
vcoubard	1132:692ddf04fc42	419	* flags may be specified in combination.
vcoubard	1132:692ddf04fc42	420	*
vcoubard	1145:249843612f87	421	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	422	* ble.accumulateAdvertisingPayload(flags) should be replaced with
vcoubard	1145:249843612f87	423	* ble.gap().accumulateAdvertisingPayload(flags).
vcoubard	1132:692ddf04fc42	424	*/
vcoubard	1132:692ddf04fc42	425	ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
vcoubard	1132:692ddf04fc42	426	return gap().accumulateAdvertisingPayload(flags);
vcoubard	1132:692ddf04fc42	427	}
vcoubard	1132:692ddf04fc42	428
vcoubard	1132:692ddf04fc42	429	/**
vcoubard	1132:692ddf04fc42	430	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	431	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	432	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	433	* small.
vcoubard	1132:692ddf04fc42	434	*
vcoubard	1132:692ddf04fc42	435	* @param[in] app
vcoubard	1132:692ddf04fc42	436	* The appearance of the peripheral.
vcoubard	1132:692ddf04fc42	437	*
vcoubard	1145:249843612f87	438	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	439	* ble.accumulateAdvertisingPayload(appearance) should be replaced with
vcoubard	1145:249843612f87	440	* ble.gap().accumulateAdvertisingPayload(appearance).
vcoubard	1132:692ddf04fc42	441	*/
vcoubard	1132:692ddf04fc42	442	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
vcoubard	1132:692ddf04fc42	443	return gap().accumulateAdvertisingPayload(app);
vcoubard	1132:692ddf04fc42	444	}
vcoubard	1132:692ddf04fc42	445
vcoubard	1132:692ddf04fc42	446	/**
vcoubard	1132:692ddf04fc42	447	* Accumulate an AD structure in the advertising payload. Please note that
vcoubard	1132:692ddf04fc42	448	* the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard	1132:692ddf04fc42	449	* as an additional 31 bytes if the advertising payload is too
vcoubard	1132:692ddf04fc42	450	* small.
vcoubard	1132:692ddf04fc42	451	*
vcoubard	1143:a358d0d20f62	452	* @param[in] power
vcoubard	1132:692ddf04fc42	453	* The max transmit power to be used by the controller. This
vcoubard	1132:692ddf04fc42	454	* is only a hint.
vcoubard	1132:692ddf04fc42	455	*
vcoubard	1145:249843612f87	456	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	457	* ble.accumulateAdvertisingPayloadTxPower(txPower) should be replaced with
vcoubard	1145:249843612f87	458	* ble.gap().accumulateAdvertisingPayloadTxPower(txPower).
vcoubard	1132:692ddf04fc42	459	*/
vcoubard	1132:692ddf04fc42	460	ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
vcoubard	1132:692ddf04fc42	461	return gap().accumulateAdvertisingPayloadTxPower(power);
vcoubard	1132:692ddf04fc42	462	}
vcoubard	1132:692ddf04fc42	463
vcoubard	1132:692ddf04fc42	464	/**
vcoubard	1132:692ddf04fc42	465	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1132:692ddf04fc42	466	* advertising payload. Please note that the payload is limited to 31 bytes.
vcoubard	1132:692ddf04fc42	467	* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard	1132:692ddf04fc42	468	* advertising payload is too small.
vcoubard	1132:692ddf04fc42	469	*
vcoubard	1132:692ddf04fc42	470	* @param type The type that describes the variable length data.
vcoubard	1132:692ddf04fc42	471	* @param data Data bytes.
vcoubard	1132:692ddf04fc42	472	* @param len Data length.
vcoubard	1132:692ddf04fc42	473	*
vcoubard	1145:249843612f87	474	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	475	* ble.accumulateAdvertisingPayload(...) should be replaced with
vcoubard	1145:249843612f87	476	* ble.gap().accumulateAdvertisingPayload(...).
vcoubard	1132:692ddf04fc42	477	*/
vcoubard	1132:692ddf04fc42	478	ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1132:692ddf04fc42	479	return gap().accumulateAdvertisingPayload(type, data, len);
vcoubard	1132:692ddf04fc42	480	}
vcoubard	1132:692ddf04fc42	481
vcoubard	1132:692ddf04fc42	482	/**
vcoubard	1132:692ddf04fc42	483	* Setup a particular, user-constructed advertisement payload for the
vcoubard	1132:692ddf04fc42	484	* underlying stack. It would be uncommon for this API to be used directly;
vcoubard	1132:692ddf04fc42	485	* there are other APIs to build an advertisement payload (see above).
vcoubard	1132:692ddf04fc42	486	*
vcoubard	1145:249843612f87	487	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	488	* ble.setAdvertisingData(...) should be replaced with
vcoubard	1145:249843612f87	489	* ble.gap().setAdvertisingPayload(...).
vcoubard	1132:692ddf04fc42	490	*/
vcoubard	1132:692ddf04fc42	491	ble_error_t setAdvertisingData(const GapAdvertisingData &advData) {
vcoubard	1132:692ddf04fc42	492	return gap().setAdvertisingPayload(advData);
vcoubard	1132:692ddf04fc42	493	}
vcoubard	1132:692ddf04fc42	494
vcoubard	1132:692ddf04fc42	495	/**
vcoubard	1132:692ddf04fc42	496	* @return Read back advertising data. Useful for storing and
vcoubard	1132:692ddf04fc42	497	* restoring payload.
vcoubard	1132:692ddf04fc42	498	*
vcoubard	1145:249843612f87	499	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	500	* ble.getAdvertisingData(...) should be replaced with
vcoubard	1145:249843612f87	501	* ble.gap().getAdvertisingPayload()(...).
vcoubard	1132:692ddf04fc42	502	*/
vcoubard	1132:692ddf04fc42	503	const GapAdvertisingData &getAdvertisingData(void) const {
vcoubard	1132:692ddf04fc42	504	return gap().getAdvertisingPayload();
vcoubard	1132:692ddf04fc42	505	}
vcoubard	1132:692ddf04fc42	506
vcoubard	1132:692ddf04fc42	507	/**
vcoubard	1132:692ddf04fc42	508	* Reset any advertising payload prepared from prior calls to
vcoubard	1132:692ddf04fc42	509	* accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard	1132:692ddf04fc42	510	* initialized advertising payload to the underlying stack.
vcoubard	1132:692ddf04fc42	511	*
vcoubard	1145:249843612f87	512	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	513	* ble.clearAdvertisingPayload(...) should be replaced with
vcoubard	1145:249843612f87	514	* ble.gap().clearAdvertisingPayload(...).
vcoubard	1132:692ddf04fc42	515	*/
vcoubard	1132:692ddf04fc42	516	void clearAdvertisingPayload(void) {
vcoubard	1132:692ddf04fc42	517	gap().clearAdvertisingPayload();
vcoubard	1132:692ddf04fc42	518	}
vcoubard	1132:692ddf04fc42	519
vcoubard	1132:692ddf04fc42	520	/**
vcoubard	1145:249843612f87	521	* Dynamically reset the accumulated advertising
vcoubard	1145:249843612f87	522	* payload and scanResponse. The application must clear and re-
vcoubard	1145:249843612f87	523	* accumulates a new advertising payload (and scanResponse) before using this
vcoubard	1145:249843612f87	524	* API.
vcoubard	1132:692ddf04fc42	525	*
vcoubard	1145:249843612f87	526	* @return BLE_ERROR_NONE when the advertising payload is set successfully.
vcoubard	1145:249843612f87	527	*
vcoubard	1145:249843612f87	528	* @deprecated You should use the parallel API from Gap directly.
vcoubard	1145:249843612f87	529	*
vcoubard	1145:249843612f87	530	* @note The new APIs in Gap update the underlying advertisement payload
vcoubard	1132:692ddf04fc42	531	* implicitly.
vcoubard	1132:692ddf04fc42	532	*/
vcoubard	1132:692ddf04fc42	533	ble_error_t setAdvertisingPayload(void) {
vcoubard	1132:692ddf04fc42	534	return BLE_ERROR_NONE;
vcoubard	1132:692ddf04fc42	535	}
vcoubard	1132:692ddf04fc42	536
vcoubard	1132:692ddf04fc42	537	/**
vcoubard	1132:692ddf04fc42	538	* Accumulate a variable length byte-stream as an AD structure in the
vcoubard	1132:692ddf04fc42	539	* scanResponse payload.
vcoubard	1132:692ddf04fc42	540	*
vcoubard	1132:692ddf04fc42	541	* @param[in] type The type that describes the variable length data.
vcoubard	1132:692ddf04fc42	542	* @param[in] data Data bytes.
vcoubard	1132:692ddf04fc42	543	* @param[in] len Data length.
vcoubard	1132:692ddf04fc42	544	*
vcoubard	1145:249843612f87	545	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	546	* ble.accumulateScanResponse(...) should be replaced with
vcoubard	1145:249843612f87	547	* ble.gap().accumulateScanResponse(...).
vcoubard	1132:692ddf04fc42	548	*/
vcoubard	1132:692ddf04fc42	549	ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
vcoubard	1132:692ddf04fc42	550	return gap().accumulateScanResponse(type, data, len);
vcoubard	1132:692ddf04fc42	551	}
vcoubard	1132:692ddf04fc42	552
vcoubard	1132:692ddf04fc42	553	/**
vcoubard	1132:692ddf04fc42	554	* Reset any scan response prepared from prior calls to
vcoubard	1132:692ddf04fc42	555	* accumulateScanResponse().
vcoubard	1132:692ddf04fc42	556	*
vcoubard	1145:249843612f87	557	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	558	* ble.clearScanResponse(...) should be replaced with
vcoubard	1145:249843612f87	559	* ble.gap().clearScanResponse(...).
vcoubard	1132:692ddf04fc42	560	*/
vcoubard	1132:692ddf04fc42	561	void clearScanResponse(void) {
vcoubard	1132:692ddf04fc42	562	gap().clearScanResponse();
vcoubard	1132:692ddf04fc42	563	}
vcoubard	1132:692ddf04fc42	564
vcoubard	1132:692ddf04fc42	565	/**
vcoubard	1132:692ddf04fc42	566	* Start advertising.
vcoubard	1132:692ddf04fc42	567	*
vcoubard	1145:249843612f87	568	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	569	* ble.startAdvertising(...) should be replaced with
vcoubard	1145:249843612f87	570	* ble.gap().startAdvertising(...).
vcoubard	1132:692ddf04fc42	571	*/
vcoubard	1132:692ddf04fc42	572	ble_error_t startAdvertising(void) {
vcoubard	1132:692ddf04fc42	573	return gap().startAdvertising();
vcoubard	1132:692ddf04fc42	574	}
vcoubard	1132:692ddf04fc42	575
vcoubard	1132:692ddf04fc42	576	/**
vcoubard	1132:692ddf04fc42	577	* Stop advertising.
vcoubard	1132:692ddf04fc42	578	*
vcoubard	1145:249843612f87	579	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	580	* ble.stopAdvertising(...) should be replaced with
vcoubard	1145:249843612f87	581	* ble.gap().stopAdvertising(...).
vcoubard	1132:692ddf04fc42	582	*/
vcoubard	1132:692ddf04fc42	583	ble_error_t stopAdvertising(void) {
vcoubard	1132:692ddf04fc42	584	return gap().stopAdvertising();
vcoubard	1132:692ddf04fc42	585	}
vcoubard	1132:692ddf04fc42	586
vcoubard	1132:692ddf04fc42	587	/**
vcoubard	1132:692ddf04fc42	588	* Set up parameters for GAP scanning (observer mode).
vcoubard	1132:692ddf04fc42	589	* @param[in] interval
vcoubard	1132:692ddf04fc42	590	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	591	* @param[in] window
vcoubard	1132:692ddf04fc42	592	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	593	* @param[in] timeout
vcoubard	1132:692ddf04fc42	594	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard	1132:692ddf04fc42	595	* @param[in] activeScanning
vcoubard	1132:692ddf04fc42	596	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1132:692ddf04fc42	597	* scan response from a peer if possible.
vcoubard	1132:692ddf04fc42	598	*
vcoubard	1132:692ddf04fc42	599	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1132:692ddf04fc42	600	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1132:692ddf04fc42	601	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1132:692ddf04fc42	602	* to have the interval and window set to the same value. In this case,
vcoubard	1132:692ddf04fc42	603	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1132:692ddf04fc42	604	* interval.
vcoubard	1132:692ddf04fc42	605	*
vcoubard	1132:692ddf04fc42	606	* Once the scanning parameters have been configured, scanning can be
vcoubard	1132:692ddf04fc42	607	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	608	*
vcoubard	1143:a358d0d20f62	609	* @note The scan interval and window are recommendations to the BLE stack.
vcoubard	1132:692ddf04fc42	610	*
vcoubard	1145:249843612f87	611	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	612	* ble.setScanParams(...) should be replaced with
vcoubard	1145:249843612f87	613	* ble.gap().setScanParams(...).
vcoubard	1132:692ddf04fc42	614	*/
vcoubard	1132:692ddf04fc42	615	ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
vcoubard	1132:692ddf04fc42	616	uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
vcoubard	1132:692ddf04fc42	617	uint16_t timeout = 0,
vcoubard	1132:692ddf04fc42	618	bool activeScanning = false) {
vcoubard	1132:692ddf04fc42	619	return gap().setScanParams(interval, window, timeout, activeScanning);
vcoubard	1132:692ddf04fc42	620	}
vcoubard	1132:692ddf04fc42	621
vcoubard	1132:692ddf04fc42	622	/**
vcoubard	1132:692ddf04fc42	623	* Set up the scanInterval parameter for GAP scanning (observer mode).
vcoubard	1132:692ddf04fc42	624	* @param[in] interval
vcoubard	1132:692ddf04fc42	625	* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	626	*
vcoubard	1132:692ddf04fc42	627	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1132:692ddf04fc42	628	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1132:692ddf04fc42	629	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1132:692ddf04fc42	630	* to have the interval and window set to the same value. In this case,
vcoubard	1132:692ddf04fc42	631	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1132:692ddf04fc42	632	* interval.
vcoubard	1132:692ddf04fc42	633	*
vcoubard	1132:692ddf04fc42	634	* Once the scanning parameters have been configured, scanning can be
vcoubard	1132:692ddf04fc42	635	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	636	*
vcoubard	1145:249843612f87	637	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	638	* ble.setScanInterval(interval) should be replaced with
vcoubard	1145:249843612f87	639	* ble.gap().setScanInterval(interval).
vcoubard	1132:692ddf04fc42	640	*/
vcoubard	1132:692ddf04fc42	641	ble_error_t setScanInterval(uint16_t interval) {
vcoubard	1132:692ddf04fc42	642	return gap().setScanInterval(interval);
vcoubard	1132:692ddf04fc42	643	}
vcoubard	1132:692ddf04fc42	644
vcoubard	1132:692ddf04fc42	645	/**
vcoubard	1132:692ddf04fc42	646	* Set up the scanWindow parameter for GAP scanning (observer mode).
vcoubard	1132:692ddf04fc42	647	* @param[in] window
vcoubard	1132:692ddf04fc42	648	* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
vcoubard	1132:692ddf04fc42	649	*
vcoubard	1132:692ddf04fc42	650	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1132:692ddf04fc42	651	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1132:692ddf04fc42	652	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1132:692ddf04fc42	653	* to have the interval and window set to the same value. In this case,
vcoubard	1132:692ddf04fc42	654	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1132:692ddf04fc42	655	* interval.
vcoubard	1132:692ddf04fc42	656	*
vcoubard	1132:692ddf04fc42	657	* Once the scanning parameters have been configured, scanning can be
vcoubard	1132:692ddf04fc42	658	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	659	*
vcoubard	1145:249843612f87	660	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	661	* ble.setScanWindow(window) should be replaced with
vcoubard	1145:249843612f87	662	* ble.gap().setScanWindow(window).
vcoubard	1132:692ddf04fc42	663	*/
vcoubard	1132:692ddf04fc42	664	ble_error_t setScanWindow(uint16_t window) {
vcoubard	1132:692ddf04fc42	665	return gap().setScanWindow(window);
vcoubard	1132:692ddf04fc42	666	}
vcoubard	1132:692ddf04fc42	667
vcoubard	1132:692ddf04fc42	668	/**
vcoubard	1132:692ddf04fc42	669	* Set up parameters for GAP scanning (observer mode).
vcoubard	1132:692ddf04fc42	670	* @param[in] timeout
vcoubard	1132:692ddf04fc42	671	* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables timeout.
vcoubard	1132:692ddf04fc42	672	*
vcoubard	1132:692ddf04fc42	673	* The scanning window divided by the interval determines the duty cycle for
vcoubard	1132:692ddf04fc42	674	* scanning. For example, if the interval is 100ms and the window is 10ms,
vcoubard	1132:692ddf04fc42	675	* then the controller will scan for 10 percent of the time. It is possible
vcoubard	1132:692ddf04fc42	676	* to have the interval and window set to the same value. In this case,
vcoubard	1132:692ddf04fc42	677	* scanning is continuous, with a change of scanning frequency once every
vcoubard	1132:692ddf04fc42	678	* interval.
vcoubard	1132:692ddf04fc42	679	*
vcoubard	1132:692ddf04fc42	680	* Once the scanning parameters have been configured, scanning can be
vcoubard	1132:692ddf04fc42	681	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	682	*
vcoubard	1143:a358d0d20f62	683	* @note The scan interval and window are recommendations to the BLE stack.
vcoubard	1132:692ddf04fc42	684	*
vcoubard	1145:249843612f87	685	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	686	* ble.setScanTimeout(...) should be replaced with
vcoubard	1145:249843612f87	687	* ble.gap().setScanTimeout(...).
vcoubard	1132:692ddf04fc42	688	*/
vcoubard	1132:692ddf04fc42	689	ble_error_t setScanTimeout(uint16_t timeout) {
vcoubard	1132:692ddf04fc42	690	return gap().setScanTimeout(timeout);
vcoubard	1132:692ddf04fc42	691	}
vcoubard	1132:692ddf04fc42	692
vcoubard	1132:692ddf04fc42	693	/**
vcoubard	1132:692ddf04fc42	694	* Set up parameters for GAP scanning (observer mode).
vcoubard	1132:692ddf04fc42	695	* @param[in] activeScanning
vcoubard	1132:692ddf04fc42	696	* Set to True if active-scanning is required. This is used to fetch the
vcoubard	1132:692ddf04fc42	697	* scan response from a peer if possible.
vcoubard	1132:692ddf04fc42	698	*
vcoubard	1132:692ddf04fc42	699	* Once the scanning parameters have been configured, scanning can be
vcoubard	1132:692ddf04fc42	700	* enabled by using startScan().
vcoubard	1132:692ddf04fc42	701	*
vcoubard	1145:249843612f87	702	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	703	* ble.setActiveScan(...) should be replaced with
vcoubard	1145:249843612f87	704	* ble.gap().setActiveScanning(...).
vcoubard	1132:692ddf04fc42	705	*/
vcoubard	1132:692ddf04fc42	706	void setActiveScan(bool activeScanning) {
vcoubard	1132:692ddf04fc42	707	gap().setActiveScanning(activeScanning);
vcoubard	1132:692ddf04fc42	708	}
vcoubard	1132:692ddf04fc42	709
vcoubard	1132:692ddf04fc42	710	/**
vcoubard	1132:692ddf04fc42	711	* Start scanning (Observer Procedure) based on the parameters currently in
vcoubard	1132:692ddf04fc42	712	* effect.
vcoubard	1132:692ddf04fc42	713	*
vcoubard	1132:692ddf04fc42	714	* @param[in] callback
vcoubard	1132:692ddf04fc42	715	* The application-specific callback to be invoked upon
vcoubard	1132:692ddf04fc42	716	* receiving every advertisement report. This can be passed in
vcoubard	1132:692ddf04fc42	717	* as NULL, in which case scanning may not be enabled at all.
vcoubard	1132:692ddf04fc42	718	*
vcoubard	1145:249843612f87	719	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	720	* ble.startScan(callback) should be replaced with
vcoubard	1145:249843612f87	721	* ble.gap().startScan(callback).
vcoubard	1132:692ddf04fc42	722	*/
vcoubard	1132:692ddf04fc42	723	ble_error_t startScan(void (callback)(const Gap::AdvertisementCallbackParams_t params)) {
vcoubard	1132:692ddf04fc42	724	return gap().startScan(callback);
vcoubard	1132:692ddf04fc42	725	}
vcoubard	1132:692ddf04fc42	726
vcoubard	1132:692ddf04fc42	727	/**
vcoubard	1132:692ddf04fc42	728	* Same as above, but this takes an (object, method) pair for a callback.
vcoubard	1132:692ddf04fc42	729	*
vcoubard	1145:249843612f87	730	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	731	* ble.startScan(callback) should be replaced with
vcoubard	1145:249843612f87	732	* ble.gap().startScan(object, callback).
vcoubard	1132:692ddf04fc42	733	*/
vcoubard	1132:692ddf04fc42	734	template<typename T>
vcoubard	1132:692ddf04fc42	735	ble_error_t startScan(T object, void (T::memberCallback)(const Gap::AdvertisementCallbackParams_t *params));
vcoubard	1132:692ddf04fc42	736
vcoubard	1132:692ddf04fc42	737	/**
vcoubard	1132:692ddf04fc42	738	* Stop scanning. The current scanning parameters remain in effect.
vcoubard	1132:692ddf04fc42	739	*
vcoubard	1132:692ddf04fc42	740	* @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
vcoubard	1132:692ddf04fc42	741	*
vcoubard	1145:249843612f87	742	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	743	* ble.stopScan() should be replaced with
vcoubard	1145:249843612f87	744	* ble.gap().stopScan().
vcoubard	1132:692ddf04fc42	745	*/
vcoubard	1132:692ddf04fc42	746	ble_error_t stopScan(void) {
vcoubard	1132:692ddf04fc42	747	return gap().stopScan();
vcoubard	1132:692ddf04fc42	748	}
vcoubard	1132:692ddf04fc42	749
vcoubard	1132:692ddf04fc42	750	/**
vcoubard	1132:692ddf04fc42	751	* Create a connection (GAP Link Establishment).
vcoubard	1132:692ddf04fc42	752	* @param peerAddr
vcoubard	1132:692ddf04fc42	753	* 48-bit address, LSB format.
vcoubard	1132:692ddf04fc42	754	* @param peerAddrType
vcoubard	1132:692ddf04fc42	755	* Address type of the peer.
vcoubard	1132:692ddf04fc42	756	* @param connectionParams
vcoubard	1132:692ddf04fc42	757	* Connection parameters.
vcoubard	1132:692ddf04fc42	758	* @param scanParams
vcoubard	1132:692ddf04fc42	759	* Paramters to use while scanning for the peer.
vcoubard	1132:692ddf04fc42	760	* @return BLE_ERROR_NONE if connection establishment procedure is started
vcoubard	1132:692ddf04fc42	761	* successfully. The onConnection callback (if set) is invoked upon
vcoubard	1132:692ddf04fc42	762	* a connection event.
vcoubard	1132:692ddf04fc42	763	*
vcoubard	1145:249843612f87	764	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	765	* ble.connect(...) should be replaced with
vcoubard	1145:249843612f87	766	* ble.gap().connect(...).
vcoubard	1132:692ddf04fc42	767	*/
vcoubard	1136:22aada733dbd	768	ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
vcoubard	1136:22aada733dbd	769	BLEProtocol::AddressType_t peerAddrType = BLEProtocol::AddressType::RANDOM_STATIC,
vcoubard	1136:22aada733dbd	770	const Gap::ConnectionParams_t *connectionParams = NULL,
vcoubard	1136:22aada733dbd	771	const GapScanningParams *scanParams = NULL) {
vcoubard	1132:692ddf04fc42	772	return gap().connect(peerAddr, peerAddrType, connectionParams, scanParams);
vcoubard	1132:692ddf04fc42	773	}
vcoubard	1132:692ddf04fc42	774
vcoubard	1132:692ddf04fc42	775	/**
vcoubard	1132:692ddf04fc42	776	* This call initiates the disconnection procedure, and its completion is
vcoubard	1132:692ddf04fc42	777	* communicated to the application with an invocation of the
vcoubard	1132:692ddf04fc42	778	* onDisconnection callback.
vcoubard	1132:692ddf04fc42	779	*
vcoubard	1132:692ddf04fc42	780	* @param[in] connectionHandle
vcoubard	1132:692ddf04fc42	781	* @param[in] reason
vcoubard	1132:692ddf04fc42	782	* The reason for disconnection; sent back to the peer.
vcoubard	1132:692ddf04fc42	783	*/
vcoubard	1132:692ddf04fc42	784	ble_error_t disconnect(Gap::Handle_t connectionHandle, Gap::DisconnectionReason_t reason) {
vcoubard	1132:692ddf04fc42	785	return gap().disconnect(connectionHandle, reason);
vcoubard	1132:692ddf04fc42	786	}
vcoubard	1132:692ddf04fc42	787
vcoubard	1132:692ddf04fc42	788	/**
vcoubard	1136:22aada733dbd	789	* This call initiates the disconnection procedure, and its completion
vcoubard	1132:692ddf04fc42	790	* is communicated to the application with an invocation of the
vcoubard	1132:692ddf04fc42	791	* onDisconnection callback.
vcoubard	1132:692ddf04fc42	792	*
vcoubard	1132:692ddf04fc42	793	* @param reason
vcoubard	1132:692ddf04fc42	794	* The reason for disconnection; sent back to the peer.
vcoubard	1132:692ddf04fc42	795	*
vcoubard	1145:249843612f87	796	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	797	* ble.disconnect(reason) should be replaced with
vcoubard	1145:249843612f87	798	* ble.gap().disconnect(reason).
vcoubard	1132:692ddf04fc42	799	*
vcoubard	1143:a358d0d20f62	800	* @note This version of disconnect() doesn't take a connection handle. It
vcoubard	1132:692ddf04fc42	801	* works reliably only for stacks that are limited to a single
vcoubard	1145:249843612f87	802	* connection.
vcoubard	1145:249843612f87	803	*
vcoubard	1145:249843612f87	804	* @deprecated You should use the parallel API from Gap directly.
vcoubard	1132:692ddf04fc42	805	*/
vcoubard	1132:692ddf04fc42	806	ble_error_t disconnect(Gap::DisconnectionReason_t reason) {
vcoubard	1132:692ddf04fc42	807	return gap().disconnect(reason);
vcoubard	1132:692ddf04fc42	808	}
vcoubard	1132:692ddf04fc42	809
vcoubard	1132:692ddf04fc42	810	/**
vcoubard	1143:a358d0d20f62	811	* Returns the current Gap state of the device using a bitmask that
vcoubard	1132:692ddf04fc42	812	* describes whether the device is advertising or connected.
vcoubard	1132:692ddf04fc42	813	*
vcoubard	1145:249843612f87	814	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	815	* ble.getGapState() should be replaced with
vcoubard	1145:249843612f87	816	* ble.gap().getState().
vcoubard	1132:692ddf04fc42	817	*/
vcoubard	1132:692ddf04fc42	818	Gap::GapState_t getGapState(void) const {
vcoubard	1132:692ddf04fc42	819	return gap().getState();
vcoubard	1132:692ddf04fc42	820	}
vcoubard	1132:692ddf04fc42	821
vcoubard	1132:692ddf04fc42	822	/**
vcoubard	1132:692ddf04fc42	823	* Get the GAP peripheral's preferred connection parameters. These are the
vcoubard	1132:692ddf04fc42	824	* defaults that the peripheral would like to have in a connection. The
vcoubard	1132:692ddf04fc42	825	* choice of the connection parameters is eventually up to the central.
vcoubard	1132:692ddf04fc42	826	*
vcoubard	1132:692ddf04fc42	827	* @param[out] params
vcoubard	1132:692ddf04fc42	828	* The structure where the parameters will be stored. Memory
vcoubard	1132:692ddf04fc42	829	* for this is owned by the caller.
vcoubard	1132:692ddf04fc42	830	*
vcoubard	1132:692ddf04fc42	831	* @return BLE_ERROR_NONE if the parameters were successfully filled into
vcoubard	1132:692ddf04fc42	832	* the given structure pointed to by params.
vcoubard	1132:692ddf04fc42	833	*
vcoubard	1145:249843612f87	834	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	835	* ble.getPreferredConnectionParams() should be replaced with
vcoubard	1145:249843612f87	836	* ble.gap().getPreferredConnectionParams().
vcoubard	1132:692ddf04fc42	837	*/
vcoubard	1132:692ddf04fc42	838	ble_error_t getPreferredConnectionParams(Gap::ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	839	return gap().getPreferredConnectionParams(params);
vcoubard	1132:692ddf04fc42	840	}
vcoubard	1132:692ddf04fc42	841
vcoubard	1132:692ddf04fc42	842	/**
vcoubard	1132:692ddf04fc42	843	* Set the GAP peripheral's preferred connection parameters. These are the
vcoubard	1132:692ddf04fc42	844	* defaults that the peripheral would like to have in a connection. The
vcoubard	1132:692ddf04fc42	845	* choice of the connection parameters is eventually up to the central.
vcoubard	1132:692ddf04fc42	846	*
vcoubard	1132:692ddf04fc42	847	* @param[in] params
vcoubard	1132:692ddf04fc42	848	* The structure containing the desired parameters.
vcoubard	1132:692ddf04fc42	849	*
vcoubard	1145:249843612f87	850	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	851	* ble.setPreferredConnectionParams() should be replaced with
vcoubard	1145:249843612f87	852	* ble.gap().setPreferredConnectionParams().
vcoubard	1132:692ddf04fc42	853	*/
vcoubard	1132:692ddf04fc42	854	ble_error_t setPreferredConnectionParams(const Gap::ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	855	return gap().setPreferredConnectionParams(params);
vcoubard	1132:692ddf04fc42	856	}
vcoubard	1132:692ddf04fc42	857
vcoubard	1132:692ddf04fc42	858	/**
vcoubard	1132:692ddf04fc42	859	* Update connection parameters while in the peripheral role.
vcoubard	1132:692ddf04fc42	860	* @details In the peripheral role, this will send the corresponding L2CAP request to the connected peer and wait for
vcoubard	1132:692ddf04fc42	861	* the central to perform the procedure.
vcoubard	1132:692ddf04fc42	862	* @param[in] handle
vcoubard	1132:692ddf04fc42	863	* Connection Handle
vcoubard	1132:692ddf04fc42	864	* @param[in] params
vcoubard	1132:692ddf04fc42	865	* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
vcoubard	1132:692ddf04fc42	866	* the parameters in the PPCP characteristic of the GAP service will be used instead.
vcoubard	1132:692ddf04fc42	867	*
vcoubard	1145:249843612f87	868	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	869	* ble.updateConnectionParams() should be replaced with
vcoubard	1145:249843612f87	870	* ble.gap().updateConnectionParams().
vcoubard	1132:692ddf04fc42	871	*/
vcoubard	1132:692ddf04fc42	872	ble_error_t updateConnectionParams(Gap::Handle_t handle, const Gap::ConnectionParams_t *params) {
vcoubard	1132:692ddf04fc42	873	return gap().updateConnectionParams(handle, params);
vcoubard	1132:692ddf04fc42	874	}
vcoubard	1132:692ddf04fc42	875
vcoubard	1132:692ddf04fc42	876	/**
vcoubard	1143:a358d0d20f62	877	* Set the device name characteristic in the Gap service.
vcoubard	1132:692ddf04fc42	878	* @param[in] deviceName
vcoubard	1132:692ddf04fc42	879	* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
vcoubard	1132:692ddf04fc42	880	*
vcoubard	1145:249843612f87	881	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	882	* ble.setDeviceName() should be replaced with
vcoubard	1145:249843612f87	883	* ble.gap().setDeviceName().
vcoubard	1132:692ddf04fc42	884	*/
vcoubard	1132:692ddf04fc42	885	ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard	1132:692ddf04fc42	886	return gap().setDeviceName(deviceName);
vcoubard	1132:692ddf04fc42	887	}
vcoubard	1132:692ddf04fc42	888
vcoubard	1132:692ddf04fc42	889	/**
vcoubard	1143:a358d0d20f62	890	* Get the value of the device name characteristic in the Gap service.
vcoubard	1132:692ddf04fc42	891	* @param[out] deviceName
vcoubard	1132:692ddf04fc42	892	* Pointer to an empty buffer where the UTF-8 *non NULL-
vcoubard	1132:692ddf04fc42	893	* terminated* string will be placed. Set this
vcoubard	1132:692ddf04fc42	894	* value to NULL in order to obtain the deviceName-length
vcoubard	1132:692ddf04fc42	895	* from the 'length' parameter.
vcoubard	1132:692ddf04fc42	896	*
vcoubard	1143:a358d0d20f62	897	* @param[in,out] lengthP
vcoubard	1132:692ddf04fc42	898	* (on input) Length of the buffer pointed to by deviceName;
vcoubard	1132:692ddf04fc42	899	* (on output) the complete device name length (without the
vcoubard	1132:692ddf04fc42	900	* null terminator).
vcoubard	1132:692ddf04fc42	901	*
vcoubard	1132:692ddf04fc42	902	* @note If the device name is longer than the size of the supplied buffer,
vcoubard	1132:692ddf04fc42	903	* length will return the complete device name length, and not the
vcoubard	1132:692ddf04fc42	904	* number of bytes actually returned in deviceName. The application may
vcoubard	1132:692ddf04fc42	905	* use this information to retry with a suitable buffer size.
vcoubard	1132:692ddf04fc42	906	*
vcoubard	1145:249843612f87	907	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	908	* ble.getDeviceName() should be replaced with
vcoubard	1145:249843612f87	909	* ble.gap().getDeviceName().
vcoubard	1132:692ddf04fc42	910	*/
vcoubard	1132:692ddf04fc42	911	ble_error_t getDeviceName(uint8_t deviceName, unsigned lengthP) {
vcoubard	1132:692ddf04fc42	912	return gap().getDeviceName(deviceName, lengthP);
vcoubard	1132:692ddf04fc42	913	}
vcoubard	1132:692ddf04fc42	914
vcoubard	1132:692ddf04fc42	915	/**
vcoubard	1143:a358d0d20f62	916	* Set the appearance characteristic in the Gap service.
vcoubard	1132:692ddf04fc42	917	* @param[in] appearance
vcoubard	1132:692ddf04fc42	918	* The new value for the device-appearance.
vcoubard	1132:692ddf04fc42	919	*
vcoubard	1145:249843612f87	920	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	921	* ble.setAppearance() should be replaced with
vcoubard	1145:249843612f87	922	* ble.gap().setAppearance().
vcoubard	1132:692ddf04fc42	923	*/
vcoubard	1132:692ddf04fc42	924	ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard	1132:692ddf04fc42	925	return gap().setAppearance(appearance);
vcoubard	1132:692ddf04fc42	926	}
vcoubard	1132:692ddf04fc42	927
vcoubard	1132:692ddf04fc42	928	/**
vcoubard	1143:a358d0d20f62	929	* Get the appearance characteristic in the Gap service.
vcoubard	1143:a358d0d20f62	930	* @param[out] appearanceP
vcoubard	1132:692ddf04fc42	931	* The new value for the device-appearance.
vcoubard	1132:692ddf04fc42	932	*
vcoubard	1145:249843612f87	933	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	934	* ble.getAppearance() should be replaced with
vcoubard	1145:249843612f87	935	* ble.gap().getAppearance().
vcoubard	1132:692ddf04fc42	936	*/
vcoubard	1132:692ddf04fc42	937	ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard	1132:692ddf04fc42	938	return gap().getAppearance(appearanceP);
vcoubard	1132:692ddf04fc42	939	}
vcoubard	1132:692ddf04fc42	940
vcoubard	1132:692ddf04fc42	941	/**
vcoubard	1132:692ddf04fc42	942	* Set the radio's transmit power.
vcoubard	1132:692ddf04fc42	943	* @param[in] txPower Radio transmit power in dBm.
vcoubard	1132:692ddf04fc42	944	*
vcoubard	1145:249843612f87	945	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	946	* ble.setTxPower() should be replaced with
vcoubard	1145:249843612f87	947	* ble.gap().setTxPower().
vcoubard	1132:692ddf04fc42	948	*/
vcoubard	1132:692ddf04fc42	949	ble_error_t setTxPower(int8_t txPower) {
vcoubard	1132:692ddf04fc42	950	return gap().setTxPower(txPower);
vcoubard	1132:692ddf04fc42	951	}
vcoubard	1132:692ddf04fc42	952
vcoubard	1132:692ddf04fc42	953	/**
vcoubard	1132:692ddf04fc42	954	* Query the underlying stack for permitted arguments for setTxPower().
vcoubard	1132:692ddf04fc42	955	*
vcoubard	1132:692ddf04fc42	956	* @param[out] valueArrayPP
vcoubard	1132:692ddf04fc42	957	* Out parameter to receive the immutable array of Tx values.
vcoubard	1132:692ddf04fc42	958	* @param[out] countP
vcoubard	1132:692ddf04fc42	959	* Out parameter to receive the array's size.
vcoubard	1132:692ddf04fc42	960	*
vcoubard	1145:249843612f87	961	* @deprecated You should use the parallel API from Gap directly. A former call to
vcoubard	1145:249843612f87	962	* ble.getPermittedTxPowerValues() should be replaced with
vcoubard	1145:249843612f87	963	* ble.gap().getPermittedTxPowerValues().
vcoubard	1132:692ddf04fc42	964	*/
vcoubard	1132:692ddf04fc42	965	void getPermittedTxPowerValues(const int8_t *valueArrayPP, size_t countP) {
vcoubard	1132:692ddf04fc42	966	gap().getPermittedTxPowerValues(valueArrayPP, countP);
vcoubard	1132:692ddf04fc42	967	}
vcoubard	1132:692ddf04fc42	968
vcoubard	1132:692ddf04fc42	969	/**
vcoubard	1132:692ddf04fc42	970	* Add a service declaration to the local server ATT table. Also add the
vcoubard	1132:692ddf04fc42	971	* characteristics contained within.
vcoubard	1132:692ddf04fc42	972	*
vcoubard	1145:249843612f87	973	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	974	* to ble.addService() should be replaced with
vcoubard	1145:249843612f87	975	* ble.gattServer().addService().
vcoubard	1132:692ddf04fc42	976	*/
vcoubard	1132:692ddf04fc42	977	ble_error_t addService(GattService &service) {
vcoubard	1132:692ddf04fc42	978	return gattServer().addService(service);
vcoubard	1132:692ddf04fc42	979	}
vcoubard	1132:692ddf04fc42	980
vcoubard	1132:692ddf04fc42	981	/**
vcoubard	1132:692ddf04fc42	982	* Read the value of a characteristic from the local GattServer.
vcoubard	1132:692ddf04fc42	983	* @param[in] attributeHandle
vcoubard	1132:692ddf04fc42	984	* Attribute handle for the value attribute of the characteristic.
vcoubard	1132:692ddf04fc42	985	* @param[out] buffer
vcoubard	1132:692ddf04fc42	986	* A buffer to hold the value being read.
vcoubard	1143:a358d0d20f62	987	* @param[in,out] lengthP
vcoubard	1132:692ddf04fc42	988	* Length of the buffer being supplied. If the attribute
vcoubard	1132:692ddf04fc42	989	* value is longer than the size of the supplied buffer,
vcoubard	1132:692ddf04fc42	990	* this variable will return the total attribute value length
vcoubard	1132:692ddf04fc42	991	* (excluding offset). The application may use this
vcoubard	1132:692ddf04fc42	992	* information to allocate a suitable buffer size.
vcoubard	1132:692ddf04fc42	993	*
vcoubard	1132:692ddf04fc42	994	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard	1132:692ddf04fc42	995	*
vcoubard	1145:249843612f87	996	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	997	* to ble.readCharacteristicValue() should be replaced with
vcoubard	1145:249843612f87	998	* ble.gattServer().read().
vcoubard	1132:692ddf04fc42	999	*/
vcoubard	1132:692ddf04fc42	1000	ble_error_t readCharacteristicValue(GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
vcoubard	1132:692ddf04fc42	1001	return gattServer().read(attributeHandle, buffer, lengthP);
vcoubard	1132:692ddf04fc42	1002	}
vcoubard	1132:692ddf04fc42	1003
vcoubard	1132:692ddf04fc42	1004	/**
vcoubard	1132:692ddf04fc42	1005	* Read the value of a characteristic from the local GattServer.
vcoubard	1132:692ddf04fc42	1006	* @param[in] connectionHandle
vcoubard	1132:692ddf04fc42	1007	* Connection Handle.
vcoubard	1132:692ddf04fc42	1008	* @param[in] attributeHandle
vcoubard	1132:692ddf04fc42	1009	* Attribute handle for the value attribute of the characteristic.
vcoubard	1132:692ddf04fc42	1010	* @param[out] buffer
vcoubard	1132:692ddf04fc42	1011	* A buffer to hold the value being read.
vcoubard	1143:a358d0d20f62	1012	* @param[in,out] lengthP
vcoubard	1132:692ddf04fc42	1013	* Length of the buffer being supplied. If the attribute
vcoubard	1132:692ddf04fc42	1014	* value is longer than the size of the supplied buffer,
vcoubard	1132:692ddf04fc42	1015	* this variable will return the total attribute value length
vcoubard	1132:692ddf04fc42	1016	* (excluding offset). The application may use this
vcoubard	1132:692ddf04fc42	1017	* information to allocate a suitable buffer size.
vcoubard	1132:692ddf04fc42	1018	*
vcoubard	1132:692ddf04fc42	1019	* @return BLE_ERROR_NONE if a value was read successfully into the buffer.
vcoubard	1132:692ddf04fc42	1020	*
vcoubard	1132:692ddf04fc42	1021	* @note This API is a version of the above, with an additional connection handle
vcoubard	1132:692ddf04fc42	1022	* parameter to allow fetches for connection-specific multivalued
vcoubard	1132:692ddf04fc42	1023	* attributes (such as the CCCDs).
vcoubard	1132:692ddf04fc42	1024	*
vcoubard	1145:249843612f87	1025	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1026	* to ble.readCharacteristicValue() should be replaced with
vcoubard	1145:249843612f87	1027	* ble.gattServer().read().
vcoubard	1132:692ddf04fc42	1028	*/
vcoubard	1132:692ddf04fc42	1029	ble_error_t readCharacteristicValue(Gap::Handle_t connectionHandle, GattAttribute::Handle_t attributeHandle, uint8_t buffer, uint16_t lengthP) {
vcoubard	1132:692ddf04fc42	1030	return gattServer().read(connectionHandle, attributeHandle, buffer, lengthP);
vcoubard	1132:692ddf04fc42	1031	}
vcoubard	1132:692ddf04fc42	1032
vcoubard	1132:692ddf04fc42	1033	/**
vcoubard	1132:692ddf04fc42	1034	* Update the value of a characteristic on the local GattServer.
vcoubard	1132:692ddf04fc42	1035	*
vcoubard	1132:692ddf04fc42	1036	* @param[in] attributeHandle
vcoubard	1132:692ddf04fc42	1037	* Handle for the value attribute of the characteristic.
vcoubard	1132:692ddf04fc42	1038	* @param[in] value
vcoubard	1132:692ddf04fc42	1039	* A pointer to a buffer holding the new value.
vcoubard	1132:692ddf04fc42	1040	* @param[in] size
vcoubard	1132:692ddf04fc42	1041	* Size of the new value (in bytes).
vcoubard	1132:692ddf04fc42	1042	* @param[in] localOnly
vcoubard	1132:692ddf04fc42	1043	* Should this update be kept on the local
vcoubard	1132:692ddf04fc42	1044	* GattServer regardless of the state of the
vcoubard	1132:692ddf04fc42	1045	* notify/indicate flag in the CCCD for this
vcoubard	1132:692ddf04fc42	1046	* characteristic? If set to true, no notification
vcoubard	1132:692ddf04fc42	1047	* or indication is generated.
vcoubard	1132:692ddf04fc42	1048	*
vcoubard	1132:692ddf04fc42	1049	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard	1132:692ddf04fc42	1050	*
vcoubard	1145:249843612f87	1051	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1052	* to ble.updateCharacteristicValue() should be replaced with
vcoubard	1145:249843612f87	1053	* ble.gattServer().write().
vcoubard	1132:692ddf04fc42	1054	*/
vcoubard	1132:692ddf04fc42	1055	ble_error_t updateCharacteristicValue(GattAttribute::Handle_t attributeHandle,
vcoubard	1132:692ddf04fc42	1056	const uint8_t *value,
vcoubard	1132:692ddf04fc42	1057	uint16_t size,
vcoubard	1132:692ddf04fc42	1058	bool localOnly = false) {
vcoubard	1132:692ddf04fc42	1059	return gattServer().write(attributeHandle, value, size, localOnly);
vcoubard	1132:692ddf04fc42	1060	}
vcoubard	1132:692ddf04fc42	1061
vcoubard	1132:692ddf04fc42	1062	/**
vcoubard	1132:692ddf04fc42	1063	* Update the value of a characteristic on the local GattServer. A version
vcoubard	1132:692ddf04fc42	1064	* of the above, with a connection handle parameter to allow updates
vcoubard	1132:692ddf04fc42	1065	* for connection-specific multivalued attributes (such as the CCCDs).
vcoubard	1132:692ddf04fc42	1066	*
vcoubard	1132:692ddf04fc42	1067	* @param[in] connectionHandle
vcoubard	1132:692ddf04fc42	1068	* Connection Handle.
vcoubard	1132:692ddf04fc42	1069	* @param[in] attributeHandle
vcoubard	1132:692ddf04fc42	1070	* Handle for the value attribute of the Characteristic.
vcoubard	1132:692ddf04fc42	1071	* @param[in] value
vcoubard	1132:692ddf04fc42	1072	* A pointer to a buffer holding the new value.
vcoubard	1132:692ddf04fc42	1073	* @param[in] size
vcoubard	1132:692ddf04fc42	1074	* Size of the new value (in bytes).
vcoubard	1132:692ddf04fc42	1075	* @param[in] localOnly
vcoubard	1132:692ddf04fc42	1076	* Should this update be kept on the local
vcoubard	1132:692ddf04fc42	1077	* GattServer regardless of the state of the
vcoubard	1132:692ddf04fc42	1078	* notify/indicate flag in the CCCD for this
vcoubard	1132:692ddf04fc42	1079	* Characteristic? If set to true, no notification
vcoubard	1132:692ddf04fc42	1080	* or indication is generated.
vcoubard	1132:692ddf04fc42	1081	*
vcoubard	1132:692ddf04fc42	1082	* @return BLE_ERROR_NONE if we have successfully set the value of the attribute.
vcoubard	1132:692ddf04fc42	1083	*
vcoubard	1145:249843612f87	1084	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1085	* to ble.updateCharacteristicValue() should be replaced with
vcoubard	1145:249843612f87	1086	* ble.gattServer().write().
vcoubard	1132:692ddf04fc42	1087	*/
vcoubard	1132:692ddf04fc42	1088	ble_error_t updateCharacteristicValue(Gap::Handle_t connectionHandle,
vcoubard	1132:692ddf04fc42	1089	GattAttribute::Handle_t attributeHandle,
vcoubard	1132:692ddf04fc42	1090	const uint8_t *value,
vcoubard	1132:692ddf04fc42	1091	uint16_t size,
vcoubard	1132:692ddf04fc42	1092	bool localOnly = false) {
vcoubard	1132:692ddf04fc42	1093	return gattServer().write(connectionHandle, attributeHandle, value, size, localOnly);
vcoubard	1132:692ddf04fc42	1094	}
vcoubard	1132:692ddf04fc42	1095
vcoubard	1132:692ddf04fc42	1096	/**
vcoubard	1132:692ddf04fc42	1097	* Enable the BLE stack's Security Manager. The Security Manager implements
vcoubard	1132:692ddf04fc42	1098	* the cryptographic algorithms and protocol exchanges that allow two
vcoubard	1132:692ddf04fc42	1099	* devices to securely exchange data and privately detect each other.
vcoubard	1132:692ddf04fc42	1100	* Calling this API is a prerequisite for encryption and pairing (bonding).
vcoubard	1132:692ddf04fc42	1101	*
vcoubard	1132:692ddf04fc42	1102	* @param[in] enableBonding Allow for bonding.
vcoubard	1132:692ddf04fc42	1103	* @param[in] requireMITM Require protection against man-in-the-middle attacks.
vcoubard	1132:692ddf04fc42	1104	* @param[in] iocaps To specify the I/O capabilities of this peripheral,
vcoubard	1132:692ddf04fc42	1105	* such as availability of a display or keyboard, to
vcoubard	1132:692ddf04fc42	1106	* support out-of-band exchanges of security data.
vcoubard	1132:692ddf04fc42	1107	* @param[in] passkey To specify a static passkey.
vcoubard	1132:692ddf04fc42	1108	*
vcoubard	1132:692ddf04fc42	1109	* @return BLE_ERROR_NONE on success.
vcoubard	1132:692ddf04fc42	1110	*
vcoubard	1145:249843612f87	1111	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1112	* call to ble.initializeSecurity(...) should be replaced with
vcoubard	1145:249843612f87	1113	* ble.securityManager().init(...).
vcoubard	1132:692ddf04fc42	1114	*/
vcoubard	1132:692ddf04fc42	1115	ble_error_t initializeSecurity(bool enableBonding = true,
vcoubard	1132:692ddf04fc42	1116	bool requireMITM = true,
vcoubard	1132:692ddf04fc42	1117	SecurityManager::SecurityIOCapabilities_t iocaps = SecurityManager::IO_CAPS_NONE,
vcoubard	1132:692ddf04fc42	1118	const SecurityManager::Passkey_t passkey = NULL) {
vcoubard	1132:692ddf04fc42	1119	return securityManager().init(enableBonding, requireMITM, iocaps, passkey);
vcoubard	1132:692ddf04fc42	1120	}
vcoubard	1132:692ddf04fc42	1121
vcoubard	1132:692ddf04fc42	1122	/**
vcoubard	1132:692ddf04fc42	1123	* Get the security status of a connection.
vcoubard	1132:692ddf04fc42	1124	*
vcoubard	1132:692ddf04fc42	1125	* @param[in] connectionHandle Handle to identify the connection.
vcoubard	1132:692ddf04fc42	1126	* @param[out] securityStatusP Security status.
vcoubard	1132:692ddf04fc42	1127	*
vcoubard	1132:692ddf04fc42	1128	* @return BLE_SUCCESS or appropriate error code indicating the reason of failure.
vcoubard	1132:692ddf04fc42	1129	*
vcoubard	1145:249843612f87	1130	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1131	* call to ble.getLinkSecurity(...) should be replaced with
vcoubard	1145:249843612f87	1132	* ble.securityManager().getLinkSecurity(...).
vcoubard	1132:692ddf04fc42	1133	*/
vcoubard	1132:692ddf04fc42	1134	ble_error_t getLinkSecurity(Gap::Handle_t connectionHandle, SecurityManager::LinkSecurityStatus_t *securityStatusP) {
vcoubard	1132:692ddf04fc42	1135	return securityManager().getLinkSecurity(connectionHandle, securityStatusP);
vcoubard	1132:692ddf04fc42	1136	}
vcoubard	1132:692ddf04fc42	1137
vcoubard	1132:692ddf04fc42	1138	/**
vcoubard	1132:692ddf04fc42	1139	* Delete all peer device context and all related bonding information from
vcoubard	1132:692ddf04fc42	1140	* the database within the security manager.
vcoubard	1132:692ddf04fc42	1141	*
vcoubard	1132:692ddf04fc42	1142	* @retval BLE_ERROR_NONE On success; else returns an error code indicating the reason for the failure.
vcoubard	1132:692ddf04fc42	1143	* @retval BLE_ERROR_INVALID_STATE If the API is called without module initialization or
vcoubard	1132:692ddf04fc42	1144	* application registration.
vcoubard	1132:692ddf04fc42	1145	*
vcoubard	1145:249843612f87	1146	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1147	* call to ble.purgeAllBondingState() should be replaced with
vcoubard	1145:249843612f87	1148	* ble.securityManager().purgeAllBondingState().
vcoubard	1132:692ddf04fc42	1149	*/
vcoubard	1132:692ddf04fc42	1150	ble_error_t purgeAllBondingState(void) {
vcoubard	1132:692ddf04fc42	1151	return securityManager().purgeAllBondingState();
vcoubard	1132:692ddf04fc42	1152	}
vcoubard	1132:692ddf04fc42	1153
vcoubard	1132:692ddf04fc42	1154	/**
vcoubard	1132:692ddf04fc42	1155	* Set up a callback for timeout events. Refer to Gap::TimeoutSource_t for
vcoubard	1132:692ddf04fc42	1156	* possible event types.
vcoubard	1132:692ddf04fc42	1157	*
vcoubard	1145:249843612f87	1158	* @deprecated You should use the parallel API from Gap directly. A former call
vcoubard	1145:249843612f87	1159	* to ble.onTimeout(callback) should be replaced with
vcoubard	1145:249843612f87	1160	* ble.gap().onTimeout(callback).
vcoubard	1132:692ddf04fc42	1161	*/
vcoubard	1132:692ddf04fc42	1162	void onTimeout(Gap::TimeoutEventCallback_t timeoutCallback) {
vcoubard	1132:692ddf04fc42	1163	gap().onTimeout(timeoutCallback);
vcoubard	1132:692ddf04fc42	1164	}
vcoubard	1132:692ddf04fc42	1165
vcoubard	1132:692ddf04fc42	1166	/**
vcoubard	1132:692ddf04fc42	1167	* Set up a callback for connection events. Refer to Gap::ConnectionEventCallback_t.
vcoubard	1132:692ddf04fc42	1168	*
vcoubard	1145:249843612f87	1169	* @deprecated You should use the parallel API from Gap directly. A former call
vcoubard	1145:249843612f87	1170	* to ble.onConnection(callback) should be replaced with
vcoubard	1145:249843612f87	1171	* ble.gap().onConnection(callback).
vcoubard	1132:692ddf04fc42	1172	*/
vcoubard	1132:692ddf04fc42	1173	void onConnection(Gap::ConnectionEventCallback_t connectionCallback) {
vcoubard	1132:692ddf04fc42	1174	gap().onConnection(connectionCallback);
vcoubard	1132:692ddf04fc42	1175	}
vcoubard	1132:692ddf04fc42	1176
vcoubard	1132:692ddf04fc42	1177	/**
vcoubard	1132:692ddf04fc42	1178	* Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard	1132:692ddf04fc42	1179	*
vcoubard	1145:249843612f87	1180	* @deprecated You should use the parallel API from Gap directly. A former call
vcoubard	1145:249843612f87	1181	* to ble.onDisconnection(callback) should be replaced with
vcoubard	1145:249843612f87	1182	* ble.gap().onDisconnection(callback).
vcoubard	1132:692ddf04fc42	1183	*/
vcoubard	1132:692ddf04fc42	1184	void onDisconnection(Gap::DisconnectionEventCallback_t disconnectionCallback) {
vcoubard	1132:692ddf04fc42	1185	gap().onDisconnection(disconnectionCallback);
vcoubard	1132:692ddf04fc42	1186	}
vcoubard	1132:692ddf04fc42	1187
vcoubard	1143:a358d0d20f62	1188	/**
vcoubard	1143:a358d0d20f62	1189	* The same as onDisconnection(), but allows an object reference and member function
vcoubard	1143:a358d0d20f62	1190	* to be added to the chain of callbacks.
vcoubard	1143:a358d0d20f62	1191	*
vcoubard	1145:249843612f87	1192	* @deprecated You should use the parallel API from Gap directly. A former call
vcoubard	1145:249843612f87	1193	* to ble.onDisconnection(callback) should be replaced with
vcoubard	1145:249843612f87	1194	* ble.gap().onDisconnection(callback).
vcoubard	1143:a358d0d20f62	1195	*/
vcoubard	1132:692ddf04fc42	1196	template<typename T>
vcoubard	1132:692ddf04fc42	1197	void onDisconnection(T tptr, void (T::mptr)(const Gap::DisconnectionCallbackParams_t*)) {
vcoubard	1132:692ddf04fc42	1198	gap().onDisconnection(tptr, mptr);
vcoubard	1132:692ddf04fc42	1199	}
vcoubard	1132:692ddf04fc42	1200
vcoubard	1132:692ddf04fc42	1201	/**
vcoubard	1132:692ddf04fc42	1202	* Radio Notification is a feature that enables ACTIVE and INACTIVE
vcoubard	1132:692ddf04fc42	1203	* (nACTIVE) signals from the stack. These notify the application when the
vcoubard	1132:692ddf04fc42	1204	* radio is in use. The signal is sent using software interrupt.
vcoubard	1132:692ddf04fc42	1205	*
vcoubard	1132:692ddf04fc42	1206	* The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard	1132:692ddf04fc42	1207	* signal is sent at the end of the radio event. These signals can be used
vcoubard	1132:692ddf04fc42	1208	* by the application programmer to synchronize application logic with radio
vcoubard	1132:692ddf04fc42	1209	* activity. For example, the ACTIVE signal can be used to shut off external
vcoubard	1132:692ddf04fc42	1210	* devices to manage peak current drawn during periods when the radio is on,
vcoubard	1132:692ddf04fc42	1211	* or to trigger sensor data collection for transmission in the radio event.
vcoubard	1132:692ddf04fc42	1212	*
vcoubard	1132:692ddf04fc42	1213	* @param callback
vcoubard	1132:692ddf04fc42	1214	* The application handler to be invoked in response to a radio
vcoubard	1132:692ddf04fc42	1215	* ACTIVE/INACTIVE event.
vcoubard	1132:692ddf04fc42	1216	*
vcoubard	1145:249843612f87	1217	* @deprecated You should use the parallel API from Gap directly. A former call
vcoubard	1145:249843612f87	1218	* to ble.onRadioNotification(...) should be replaced with
vcoubard	1145:249843612f87	1219	* ble.gap().onRadioNotification(...).
vcoubard	1132:692ddf04fc42	1220	*/
vcoubard	1132:692ddf04fc42	1221	void onRadioNotification(void (*callback)(bool)) {
vcoubard	1132:692ddf04fc42	1222	gap().onRadioNotification(callback);
vcoubard	1132:692ddf04fc42	1223	}
vcoubard	1132:692ddf04fc42	1224
vcoubard	1132:692ddf04fc42	1225	/**
vcoubard	1132:692ddf04fc42	1226	* Add a callback for the GATT event DATA_SENT (which is triggered when
vcoubard	1132:692ddf04fc42	1227	* updates are sent out by GATT in the form of notifications).
vcoubard	1132:692ddf04fc42	1228	*
vcoubard	1143:a358d0d20f62	1229	* @note It is possible to chain together multiple onDataSent callbacks
vcoubard	1132:692ddf04fc42	1230	* (potentially from different modules of an application) to receive updates
vcoubard	1132:692ddf04fc42	1231	* to characteristics.
vcoubard	1132:692ddf04fc42	1232	*
vcoubard	1143:a358d0d20f62	1233	* @note It is also possible to set up a callback into a member function of
vcoubard	1132:692ddf04fc42	1234	* some object.
vcoubard	1132:692ddf04fc42	1235	*
vcoubard	1145:249843612f87	1236	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1237	* to ble.onDataSent(...) should be replaced with
vcoubard	1145:249843612f87	1238	* ble.gattServer().onDataSent(...).
vcoubard	1132:692ddf04fc42	1239	*/
vcoubard	1132:692ddf04fc42	1240	void onDataSent(void (*callback)(unsigned count)) {
vcoubard	1132:692ddf04fc42	1241	gattServer().onDataSent(callback);
vcoubard	1132:692ddf04fc42	1242	}
vcoubard	1143:a358d0d20f62	1243
vcoubard	1143:a358d0d20f62	1244	/**
vcoubard	1143:a358d0d20f62	1245	* The same as onDataSent(), but allows an object reference and member function
vcoubard	1143:a358d0d20f62	1246	* to be added to the chain of callbacks.
vcoubard	1143:a358d0d20f62	1247	*
vcoubard	1145:249843612f87	1248	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1249	* to ble.onDataSent(...) should be replaced with
vcoubard	1145:249843612f87	1250	* ble.gattServer().onDataSent(...).
vcoubard	1143:a358d0d20f62	1251	*/
vcoubard	1132:692ddf04fc42	1252	template <typename T> void onDataSent(T * objPtr, void (T::*memberPtr)(unsigned count)) {
vcoubard	1132:692ddf04fc42	1253	gattServer().onDataSent(objPtr, memberPtr);
vcoubard	1132:692ddf04fc42	1254	}
vcoubard	1132:692ddf04fc42	1255
vcoubard	1132:692ddf04fc42	1256	/**
vcoubard	1132:692ddf04fc42	1257	* Set up a callback for when an attribute has its value updated by or at the
vcoubard	1132:692ddf04fc42	1258	* connected peer. For a peripheral, this callback is triggered when the local
vcoubard	1132:692ddf04fc42	1259	* GATT server has an attribute updated by a write command from the peer.
vcoubard	1132:692ddf04fc42	1260	* For a Central, this callback is triggered when a response is received for
vcoubard	1132:692ddf04fc42	1261	* a write request.
vcoubard	1132:692ddf04fc42	1262	*
vcoubard	1143:a358d0d20f62	1263	* @note It is possible to chain together multiple onDataWritten callbacks
vcoubard	1132:692ddf04fc42	1264	* (potentially from different modules of an application) to receive updates
vcoubard	1132:692ddf04fc42	1265	* to characteristics. Many services, such as DFU and UART, add their own
vcoubard	1132:692ddf04fc42	1266	* onDataWritten callbacks behind the scenes to trap interesting events.
vcoubard	1132:692ddf04fc42	1267	*
vcoubard	1143:a358d0d20f62	1268	* @note It is also possible to set up a callback into a member function of
vcoubard	1132:692ddf04fc42	1269	* some object.
vcoubard	1132:692ddf04fc42	1270	*
vcoubard	1145:249843612f87	1271	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1272	* to ble.onDataWritten(...) should be replaced with
vcoubard	1145:249843612f87	1273	* ble.gattServer().onDataWritten(...).
vcoubard	1132:692ddf04fc42	1274	*/
vcoubard	1132:692ddf04fc42	1275	void onDataWritten(void (callback)(const GattWriteCallbackParams eventDataP)) {
vcoubard	1132:692ddf04fc42	1276	gattServer().onDataWritten(callback);
vcoubard	1132:692ddf04fc42	1277	}
vcoubard	1143:a358d0d20f62	1278
vcoubard	1143:a358d0d20f62	1279	/**
vcoubard	1143:a358d0d20f62	1280	* The same as onDataWritten(), but allows an object reference and member function
vcoubard	1143:a358d0d20f62	1281	* to be added to the chain of callbacks.
vcoubard	1143:a358d0d20f62	1282	*
vcoubard	1145:249843612f87	1283	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1284	* to ble.onDataWritten(...) should be replaced with
vcoubard	1145:249843612f87	1285	* ble.gattServer().onDataWritten(...).
vcoubard	1143:a358d0d20f62	1286	*/
vcoubard	1132:692ddf04fc42	1287	template <typename T> void onDataWritten(T * objPtr, void (T::memberPtr)(const GattWriteCallbackParams context)) {
vcoubard	1132:692ddf04fc42	1288	gattServer().onDataWritten(objPtr, memberPtr);
vcoubard	1132:692ddf04fc42	1289	}
vcoubard	1132:692ddf04fc42	1290
vcoubard	1132:692ddf04fc42	1291	/**
vcoubard	1132:692ddf04fc42	1292	* Set up a callback to be invoked on the peripheral when an attribute is
vcoubard	1132:692ddf04fc42	1293	* being read by a remote client.
vcoubard	1132:692ddf04fc42	1294	*
vcoubard	1143:a358d0d20f62	1295	* @note This functionality may not be available on all underlying stacks.
vcoubard	1132:692ddf04fc42	1296	* You could use GattCharacteristic::setReadAuthorizationCallback() as an
vcoubard	1132:692ddf04fc42	1297	* alternative.
vcoubard	1132:692ddf04fc42	1298	*
vcoubard	1143:a358d0d20f62	1299	* @note It is possible to chain together multiple onDataRead callbacks
vcoubard	1132:692ddf04fc42	1300	* (potentially from different modules of an application) to receive updates
vcoubard	1132:692ddf04fc42	1301	* to characteristics. Services may add their own onDataRead callbacks
vcoubard	1132:692ddf04fc42	1302	* behind the scenes to trap interesting events.
vcoubard	1132:692ddf04fc42	1303	*
vcoubard	1143:a358d0d20f62	1304	* @note It is also possible to set up a callback into a member function of
vcoubard	1132:692ddf04fc42	1305	* some object.
vcoubard	1132:692ddf04fc42	1306	*
vcoubard	1132:692ddf04fc42	1307	* @return BLE_ERROR_NOT_IMPLEMENTED if this functionality isn't available;
vcoubard	1132:692ddf04fc42	1308	* else BLE_ERROR_NONE.
vcoubard	1132:692ddf04fc42	1309	*
vcoubard	1145:249843612f87	1310	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1311	* to ble.onDataRead(...) should be replaced with
vcoubard	1145:249843612f87	1312	* ble.gattServer().onDataRead(...).
vcoubard	1132:692ddf04fc42	1313	*/
vcoubard	1132:692ddf04fc42	1314	ble_error_t onDataRead(void (callback)(const GattReadCallbackParams eventDataP)) {
vcoubard	1132:692ddf04fc42	1315	return gattServer().onDataRead(callback);
vcoubard	1132:692ddf04fc42	1316	}
vcoubard	1143:a358d0d20f62	1317
vcoubard	1143:a358d0d20f62	1318	/**
vcoubard	1143:a358d0d20f62	1319	* The same as onDataRead(), but allows an object reference and member function
vcoubard	1143:a358d0d20f62	1320	* to be added to the chain of callbacks.
vcoubard	1143:a358d0d20f62	1321	*
vcoubard	1145:249843612f87	1322	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1323	* to ble.onDataRead(...) should be replaced with
vcoubard	1145:249843612f87	1324	* ble.gattServer().onDataRead(...).
vcoubard	1143:a358d0d20f62	1325	*/
vcoubard	1132:692ddf04fc42	1326	template <typename T> ble_error_t onDataRead(T * objPtr, void (T::memberPtr)(const GattReadCallbackParams context)) {
vcoubard	1132:692ddf04fc42	1327	return gattServer().onDataRead(objPtr, memberPtr);
vcoubard	1132:692ddf04fc42	1328	}
vcoubard	1132:692ddf04fc42	1329
vcoubard	1132:692ddf04fc42	1330	/**
vcoubard	1132:692ddf04fc42	1331	* Set up a callback for when notifications or indications are enabled for a
vcoubard	1132:692ddf04fc42	1332	* characteristic on the local GattServer.
vcoubard	1132:692ddf04fc42	1333	*
vcoubard	1145:249843612f87	1334	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1335	* to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard	1145:249843612f87	1336	* ble.gattServer().onUpdatesEnabled(callback).
vcoubard	1132:692ddf04fc42	1337	*/
vcoubard	1132:692ddf04fc42	1338	void onUpdatesEnabled(GattServer::EventCallback_t callback) {
vcoubard	1132:692ddf04fc42	1339	gattServer().onUpdatesEnabled(callback);
vcoubard	1132:692ddf04fc42	1340	}
vcoubard	1132:692ddf04fc42	1341
vcoubard	1132:692ddf04fc42	1342	/**
vcoubard	1132:692ddf04fc42	1343	* Set up a callback for when notifications or indications are disabled for a
vcoubard	1132:692ddf04fc42	1344	* characteristic on the local GattServer.
vcoubard	1132:692ddf04fc42	1345	*
vcoubard	1145:249843612f87	1346	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1347	* to ble.onUpdatesEnabled(callback) should be replaced with
vcoubard	1145:249843612f87	1348	* ble.gattServer().onUpdatesEnabled(callback).
vcoubard	1132:692ddf04fc42	1349	*/
vcoubard	1132:692ddf04fc42	1350	void onUpdatesDisabled(GattServer::EventCallback_t callback) {
vcoubard	1132:692ddf04fc42	1351	gattServer().onUpdatesDisabled(callback);
vcoubard	1132:692ddf04fc42	1352	}
vcoubard	1132:692ddf04fc42	1353
vcoubard	1132:692ddf04fc42	1354	/**
vcoubard	1132:692ddf04fc42	1355	* Set up a callback for when the GATT server receives a response for an
vcoubard	1132:692ddf04fc42	1356	* indication event sent previously.
vcoubard	1132:692ddf04fc42	1357	*
vcoubard	1145:249843612f87	1358	* @deprecated You should use the parallel API from GattServer directly. A former call
vcoubard	1145:249843612f87	1359	* to ble.onConfirmationReceived(callback) should be replaced with
vcoubard	1145:249843612f87	1360	* ble.gattServer().onConfirmationReceived(callback).
vcoubard	1132:692ddf04fc42	1361	*/
vcoubard	1132:692ddf04fc42	1362	void onConfirmationReceived(GattServer::EventCallback_t callback) {
vcoubard	1132:692ddf04fc42	1363	gattServer().onConfirmationReceived(callback);
vcoubard	1132:692ddf04fc42	1364	}
vcoubard	1132:692ddf04fc42	1365
vcoubard	1132:692ddf04fc42	1366	/**
vcoubard	1132:692ddf04fc42	1367	* Set up a callback for when the security setup procedure (key generation
vcoubard	1132:692ddf04fc42	1368	* and exchange) for a link has started. This will be skipped for bonded
vcoubard	1132:692ddf04fc42	1369	* devices. The callback is passed in parameters received from the peer's
vcoubard	1132:692ddf04fc42	1370	* security request: bool allowBonding, bool requireMITM, and
vcoubard	1132:692ddf04fc42	1371	* SecurityIOCapabilities_t.
vcoubard	1132:692ddf04fc42	1372	*
vcoubard	1145:249843612f87	1373	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1374	* call to ble.onSecuritySetupInitiated(callback) should be replaced with
vcoubard	1145:249843612f87	1375	* ble.securityManager().onSecuritySetupInitiated(callback).
vcoubard	1132:692ddf04fc42	1376	*/
vcoubard	1132:692ddf04fc42	1377	void onSecuritySetupInitiated(SecurityManager::SecuritySetupInitiatedCallback_t callback) {
vcoubard	1132:692ddf04fc42	1378	securityManager().onSecuritySetupInitiated(callback);
vcoubard	1132:692ddf04fc42	1379	}
vcoubard	1132:692ddf04fc42	1380
vcoubard	1132:692ddf04fc42	1381	/**
vcoubard	1132:692ddf04fc42	1382	* Set up a callback for when the security setup procedure (key generation
vcoubard	1132:692ddf04fc42	1383	* and exchange) for a link has completed. This will be skipped for bonded
vcoubard	1132:692ddf04fc42	1384	* devices. The callback is passed in the success/failure status of the
vcoubard	1132:692ddf04fc42	1385	* security setup procedure.
vcoubard	1132:692ddf04fc42	1386	*
vcoubard	1145:249843612f87	1387	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1388	* call to ble.onSecuritySetupCompleted(callback) should be replaced with
vcoubard	1145:249843612f87	1389	* ble.securityManager().onSecuritySetupCompleted(callback).
vcoubard	1132:692ddf04fc42	1390	*/
vcoubard	1132:692ddf04fc42	1391	void onSecuritySetupCompleted(SecurityManager::SecuritySetupCompletedCallback_t callback) {
vcoubard	1132:692ddf04fc42	1392	securityManager().onSecuritySetupCompleted(callback);
vcoubard	1132:692ddf04fc42	1393	}
vcoubard	1132:692ddf04fc42	1394
vcoubard	1132:692ddf04fc42	1395	/**
vcoubard	1132:692ddf04fc42	1396	* Set up a callback for when a link with the peer is secured. For bonded
vcoubard	1132:692ddf04fc42	1397	* devices, subsequent reconnections with a bonded peer will result only in
vcoubard	1132:692ddf04fc42	1398	* this callback when the link is secured, and setup procedures will not
vcoubard	1132:692ddf04fc42	1399	* occur unless the bonding information is either lost or deleted on either
vcoubard	1132:692ddf04fc42	1400	* or both sides. The callback is passed in a SecurityManager::SecurityMode_t according
vcoubard	1132:692ddf04fc42	1401	* to the level of security in effect for the secured link.
vcoubard	1132:692ddf04fc42	1402	*
vcoubard	1145:249843612f87	1403	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1404	* call to ble.onLinkSecured(callback) should be replaced with
vcoubard	1145:249843612f87	1405	* ble.securityManager().onLinkSecured(callback).
vcoubard	1132:692ddf04fc42	1406	*/
vcoubard	1132:692ddf04fc42	1407	void onLinkSecured(SecurityManager::LinkSecuredCallback_t callback) {
vcoubard	1132:692ddf04fc42	1408	securityManager().onLinkSecured(callback);
vcoubard	1132:692ddf04fc42	1409	}
vcoubard	1132:692ddf04fc42	1410
vcoubard	1132:692ddf04fc42	1411	/**
vcoubard	1132:692ddf04fc42	1412	* Set up a callback for successful bonding, meaning that link-specific security
vcoubard	1132:692ddf04fc42	1413	* context is stored persistently for a peer device.
vcoubard	1132:692ddf04fc42	1414	*
vcoubard	1145:249843612f87	1415	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1416	* call to ble.onSecurityContextStored(callback) should be replaced with
vcoubard	1145:249843612f87	1417	* ble.securityManager().onSecurityContextStored(callback).
vcoubard	1132:692ddf04fc42	1418	*/
vcoubard	1132:692ddf04fc42	1419	void onSecurityContextStored(SecurityManager::HandleSpecificEvent_t callback) {
vcoubard	1132:692ddf04fc42	1420	securityManager().onSecurityContextStored(callback);
vcoubard	1132:692ddf04fc42	1421	}
vcoubard	1132:692ddf04fc42	1422
vcoubard	1132:692ddf04fc42	1423	/**
vcoubard	1132:692ddf04fc42	1424	* Set up a callback for when the passkey needs to be displayed on a
vcoubard	1132:692ddf04fc42	1425	* peripheral with DISPLAY capability. This happens when security is
vcoubard	1136:22aada733dbd	1426	* configured to prevent Man-In-The-Middle attacks, and the peers need to exchange
vcoubard	1132:692ddf04fc42	1427	* a passkey (or PIN) to authenticate the connection
vcoubard	1132:692ddf04fc42	1428	* attempt.
vcoubard	1132:692ddf04fc42	1429	*
vcoubard	1145:249843612f87	1430	* @deprecated You should use the parallel API from SecurityManager directly. A former
vcoubard	1145:249843612f87	1431	* call to ble.onPasskeyDisplay(callback) should be replaced with
vcoubard	1145:249843612f87	1432	* ble.securityManager().onPasskeyDisplay(callback).
vcoubard	1132:692ddf04fc42	1433	*/
vcoubard	1132:692ddf04fc42	1434	void onPasskeyDisplay(SecurityManager::PasskeyDisplayCallback_t callback) {
vcoubard	1132:692ddf04fc42	1435	return securityManager().onPasskeyDisplay(callback);
vcoubard	1132:692ddf04fc42	1436	}
vcoubard	1132:692ddf04fc42	1437
vcoubard	1132:692ddf04fc42	1438	private:
vcoubard	1132:692ddf04fc42	1439	/**
vcoubard	1132:692ddf04fc42	1440	* Implementation of init() [internal to BLE_API].
vcoubard	1132:692ddf04fc42	1441	*
vcoubard	1132:692ddf04fc42	1442	* The implementation is separated into a private method because it isn't
vcoubard	1132:692ddf04fc42	1443	* suitable to be included in the header.
vcoubard	1132:692ddf04fc42	1444	*/
vcoubard	1132:692ddf04fc42	1445	ble_error_t initImplementation(FunctionPointerWithContext<InitializationCompleteCallbackContext *> callback);
vcoubard	1132:692ddf04fc42	1446
vcoubard	1132:692ddf04fc42	1447	private:
vcoubard	1132:692ddf04fc42	1448	BLE(const BLE&);
vcoubard	1132:692ddf04fc42	1449	BLE &operator=(const BLE &);
vcoubard	1132:692ddf04fc42	1450
vcoubard	1132:692ddf04fc42	1451	private:
vcoubard	1132:692ddf04fc42	1452	InstanceID_t instanceID;
vcoubard	1132:692ddf04fc42	1453	BLEInstanceBase transport; / The device-specific backend */
vcoubard	1132:692ddf04fc42	1454	};
vcoubard	1132:692ddf04fc42	1455
vcoubard	1145:249843612f87	1456	typedef BLE BLEDevice; /**< @deprecated This type alias is retained for the
vcoubard	1145:249843612f87	1457	* sake of compatibility with older
vcoubard	1132:692ddf04fc42	1458	* code. Will be dropped at some point soon.*/
vcoubard	1132:692ddf04fc42	1459
rgrover1	716:11b41f651697	1460	#endif // ifndef __BLE_H__

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	16 Apr 2016
Imports:	0
Forks:	1
Commits:	1202
Dependents:	0
Dependencies:	0
Followers:	1

ble/BLE.h@1145:249843612f87, 2016-04-06 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning