aapje monkey / BLE_API

Bike service

Fork of BLE_API by Bluetooth Low Energy

ble/Gap.h@1090:148d8b9b56a5, 2016-01-11 (annotated)

Committer:
vcoubard
Date:
Mon Jan 11 08:51:50 2016 +0000
Revision:
1090:148d8b9b56a5
Parent:
1089:8e810a8e083e
Child:
1091:58b2dac13261
Synchronized with git rev 0024b78a

Author: Andres Amaya Garcia

Clear shutdown callchain after exec callbacks

Who changed what in which revision?

UserRevisionLine numberNew contents of line
rgrover1 710:b2e1a2660ec2 1 /* mbed Microcontroller Library
rgrover1 710:b2e1a2660ec2 2 * Copyright (c) 2006-2013 ARM Limited
rgrover1 710:b2e1a2660ec2 3 *
rgrover1 710:b2e1a2660ec2 4 * Licensed under the Apache License, Version 2.0 (the "License");
rgrover1 710:b2e1a2660ec2 5 * you may not use this file except in compliance with the License.
rgrover1 710:b2e1a2660ec2 6 * You may obtain a copy of the License at
rgrover1 710:b2e1a2660ec2 7 *
rgrover1 710:b2e1a2660ec2 8 * http://www.apache.org/licenses/LICENSE-2.0
rgrover1 710:b2e1a2660ec2 9 *
rgrover1 710:b2e1a2660ec2 10 * Unless required by applicable law or agreed to in writing, software
rgrover1 710:b2e1a2660ec2 11 * distributed under the License is distributed on an "AS IS" BASIS,
rgrover1 710:b2e1a2660ec2 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
rgrover1 710:b2e1a2660ec2 13 * See the License for the specific language governing permissions and
rgrover1 710:b2e1a2660ec2 14 * limitations under the License.
rgrover1 710:b2e1a2660ec2 15 */
rgrover1 710:b2e1a2660ec2 16
rgrover1 710:b2e1a2660ec2 17 #ifndef __GAP_H__
rgrover1 710:b2e1a2660ec2 18 #define __GAP_H__
rgrover1 710:b2e1a2660ec2 19
vcoubard 1078:79c089630b38 20 #include "ble/BLEProtocol.h"
rgrover1 710:b2e1a2660ec2 21 #include "GapAdvertisingData.h"
rgrover1 710:b2e1a2660ec2 22 #include "GapAdvertisingParams.h"
rgrover1 710:b2e1a2660ec2 23 #include "GapScanningParams.h"
rgrover1 710:b2e1a2660ec2 24 #include "GapEvents.h"
rgrover1 829:9072de50087b 25 #include "CallChainOfFunctionPointersWithContext.h"
rgrover1 710:b2e1a2660ec2 26 #include "FunctionPointerWithContext.h"
rgrover1 710:b2e1a2660ec2 27
vcoubard 1048:efb29faf12fc 28 /* Forward declarations for classes that will only be used for pointers or references in the following. */
rgrover1 710:b2e1a2660ec2 29 class GapAdvertisingParams;
rgrover1 710:b2e1a2660ec2 30 class GapScanningParams;
rgrover1 710:b2e1a2660ec2 31 class GapAdvertisingData;
rgrover1 710:b2e1a2660ec2 32
rgrover1 710:b2e1a2660ec2 33 class Gap {
vcoubard 1078:79c089630b38 34 /*
vcoubard 1078:79c089630b38 35 * DEPRECATION ALERT: all of the APIs in this `public` block are deprecated.
vcoubard 1078:79c089630b38 36 * They have been relocated to the class BLEProtocol.
vcoubard 1078:79c089630b38 37 */
rgrover1 710:b2e1a2660ec2 38 public:
vcoubard 1078:79c089630b38 39 /**
vcoubard 1078:79c089630b38 40 * Address-type for BLEProtocol addresses.
vcoubard 1086:75d4e8ce277d 41 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1078:79c089630b38 42 */
vcoubard 1086:75d4e8ce277d 43 typedef BLEProtocol::AddressType_t AddressType_t;
vcoubard 1086:75d4e8ce277d 44
vcoubard 1086:75d4e8ce277d 45 /**
vcoubard 1086:75d4e8ce277d 46 * Address-type for BLEProtocol addresses.
vcoubard 1086:75d4e8ce277d 47 * @note: deprecated. Use BLEProtocol::AddressType_t instead.
vcoubard 1087:4c6e11878033 48 */
vcoubard 1087:4c6e11878033 49 typedef BLEProtocol::AddressType_t addr_type_t;
vcoubard 1087:4c6e11878033 50
vcoubard 1078:79c089630b38 51 static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /**< Length (in octets) of the BLE MAC address. */
vcoubard 1078:79c089630b38 52 typedef BLEProtocol::Address_t Address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 53 typedef BLEProtocol::Address_t address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::Address_t instead. */
vcoubard 1078:79c089630b38 54
vcoubard 1078:79c089630b38 55 public:
rgrover1 710:b2e1a2660ec2 56 enum TimeoutSource_t {
rgrover1 710:b2e1a2660ec2 57 TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
rgrover1 710:b2e1a2660ec2 58 TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
rgrover1 710:b2e1a2660ec2 59 TIMEOUT_SRC_SCAN = 0x02, /**< Scanning timeout. */
rgrover1 710:b2e1a2660ec2 60 TIMEOUT_SRC_CONN = 0x03, /**< Connection timeout. */
rgrover1 710:b2e1a2660ec2 61 };
rgrover1 710:b2e1a2660ec2 62
rgrover1 710:b2e1a2660ec2 63 /**
rgrover1 710:b2e1a2660ec2 64 * Enumeration for disconnection reasons. The values for these reasons are
vcoubard 1048:efb29faf12fc 65 * derived from Nordic's implementation, but the reasons are meant to be
vcoubard 1048:efb29faf12fc 66 * independent of the transport. If you are returned a reason that is not
vcoubard 1048:efb29faf12fc 67 * covered by this enumeration, please refer to the underlying
rgrover1 710:b2e1a2660ec2 68 * transport library.
rgrover1 710:b2e1a2660ec2 69 */
rgrover1 710:b2e1a2660ec2 70 enum DisconnectionReason_t {
rgrover1 710:b2e1a2660ec2 71 CONNECTION_TIMEOUT = 0x08,
rgrover1 710:b2e1a2660ec2 72 REMOTE_USER_TERMINATED_CONNECTION = 0x13,
vcoubard 1048:efb29faf12fc 73 REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES = 0x14, /**< Remote device terminated connection due to low resources.*/
vcoubard 1048:efb29faf12fc 74 REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF = 0x15, /**< Remote device terminated connection due to power off. */
rgrover1 710:b2e1a2660ec2 75 LOCAL_HOST_TERMINATED_CONNECTION = 0x16,
rgrover1 710:b2e1a2660ec2 76 CONN_INTERVAL_UNACCEPTABLE = 0x3B,
rgrover1 710:b2e1a2660ec2 77 };
rgrover1 710:b2e1a2660ec2 78
vcoubard 1048:efb29faf12fc 79 /* Describes the current state of the device (more than one bit can be set). */
rgrover1 710:b2e1a2660ec2 80 struct GapState_t {
vcoubard 1048:efb29faf12fc 81 unsigned advertising : 1; /**< Peripheral is currently advertising. */
vcoubard 1048:efb29faf12fc 82 unsigned connected : 1; /**< Peripheral is connected to a central. */
rgrover1 710:b2e1a2660ec2 83 };
rgrover1 710:b2e1a2660ec2 84
rgrover1 710:b2e1a2660ec2 85 typedef uint16_t Handle_t; /* Type for connection handle. */
rgrover1 710:b2e1a2660ec2 86
rgrover1 710:b2e1a2660ec2 87 typedef struct {
rgrover1 710:b2e1a2660ec2 88 uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 89 uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 90 uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 91 uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
rgrover1 710:b2e1a2660ec2 92 } ConnectionParams_t;
rgrover1 710:b2e1a2660ec2 93
rgrover1 710:b2e1a2660ec2 94 enum Role_t {
rgrover1 710:b2e1a2660ec2 95 PERIPHERAL = 0x1, /**< Peripheral Role. */
rgrover1 710:b2e1a2660ec2 96 CENTRAL = 0x2, /**< Central Role. */
rgrover1 710:b2e1a2660ec2 97 };
rgrover1 710:b2e1a2660ec2 98
rgrover1 710:b2e1a2660ec2 99 struct AdvertisementCallbackParams_t {
vcoubard 1079:6e2d9514f3df 100 BLEProtocol::Address_t peerAddr;
vcoubard 1079:6e2d9514f3df 101 int8_t rssi;
vcoubard 1079:6e2d9514f3df 102 bool isScanResponse;
vcoubard 1079:6e2d9514f3df 103 GapAdvertisingParams::AdvertisingType_t type;
vcoubard 1079:6e2d9514f3df 104 uint8_t advertisingDataLen;
vcoubard 1079:6e2d9514f3df 105 const uint8_t *advertisingData;
rgrover1 710:b2e1a2660ec2 106 };
rgrover1 710:b2e1a2660ec2 107 typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
rgrover1 710:b2e1a2660ec2 108
rgrover1 710:b2e1a2660ec2 109 struct ConnectionCallbackParams_t {
vcoubard 1078:79c089630b38 110 Handle_t handle;
vcoubard 1078:79c089630b38 111 Role_t role;
vcoubard 1078:79c089630b38 112 BLEProtocol::AddressType_t peerAddrType;
vcoubard 1079:6e2d9514f3df 113 BLEProtocol::Address_t peerAddr;
vcoubard 1078:79c089630b38 114 BLEProtocol::AddressType_t ownAddrType;
vcoubard 1079:6e2d9514f3df 115 BLEProtocol::Address_t ownAddr;
vcoubard 1078:79c089630b38 116 const ConnectionParams_t *connectionParams;
rgrover1 710:b2e1a2660ec2 117
vcoubard 1078:79c089630b38 118 ConnectionCallbackParams_t(Handle_t handleIn,
vcoubard 1078:79c089630b38 119 Role_t roleIn,
vcoubard 1078:79c089630b38 120 BLEProtocol::AddressType_t peerAddrTypeIn,
vcoubard 1078:79c089630b38 121 const uint8_t *peerAddrIn,
vcoubard 1078:79c089630b38 122 BLEProtocol::AddressType_t ownAddrTypeIn,
vcoubard 1078:79c089630b38 123 const uint8_t *ownAddrIn,
vcoubard 1078:79c089630b38 124 const ConnectionParams_t *connectionParamsIn) :
rgrover1 710:b2e1a2660ec2 125 handle(handleIn),
rgrover1 710:b2e1a2660ec2 126 role(roleIn),
rgrover1 710:b2e1a2660ec2 127 peerAddrType(peerAddrTypeIn),
rgrover1 710:b2e1a2660ec2 128 peerAddr(),
rgrover1 710:b2e1a2660ec2 129 ownAddrType(ownAddrTypeIn),
rgrover1 710:b2e1a2660ec2 130 ownAddr(),
rgrover1 710:b2e1a2660ec2 131 connectionParams(connectionParamsIn) {
rgrover1 710:b2e1a2660ec2 132 memcpy(peerAddr, peerAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 133 memcpy(ownAddr, ownAddrIn, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 134 }
rgrover1 710:b2e1a2660ec2 135 };
rgrover1 710:b2e1a2660ec2 136
rgrover1 829:9072de50087b 137 struct DisconnectionCallbackParams_t {
rgrover1 829:9072de50087b 138 Handle_t handle;
rgrover1 829:9072de50087b 139 DisconnectionReason_t reason;
rgrover1 829:9072de50087b 140
rgrover1 829:9072de50087b 141 DisconnectionCallbackParams_t(Handle_t handleIn,
rgrover1 829:9072de50087b 142 DisconnectionReason_t reasonIn) :
rgrover1 829:9072de50087b 143 handle(handleIn),
rgrover1 829:9072de50087b 144 reason(reasonIn)
rgrover1 829:9072de50087b 145 {}
rgrover1 829:9072de50087b 146 };
rgrover1 829:9072de50087b 147
rgrover1 710:b2e1a2660ec2 148 static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
rgrover1 710:b2e1a2660ec2 149 static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
rgrover1 710:b2e1a2660ec2 150 return (durationInMillis * 1000) / UNIT_1_25_MS;
rgrover1 710:b2e1a2660ec2 151 }
rgrover1 766:03f1a26f132f 152
vcoubard 1052:b55e1ad3e1b3 153 typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 154 typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
rgrover1 710:b2e1a2660ec2 155
vcoubard 1052:b55e1ad3e1b3 156 typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
vcoubard 1052:b55e1ad3e1b3 157 typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 158
vcoubard 1052:b55e1ad3e1b3 159 typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
vcoubard 1054:f59e5d9a992a 160 typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
vcoubard 1052:b55e1ad3e1b3 161
rgrover1 753:0f60274cd3ad 162 typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
rgrover1 710:b2e1a2660ec2 163
vcoubard 1090:148d8b9b56a5 164 typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
vcoubard 1090:148d8b9b56a5 165 typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
vcoubard 1090:148d8b9b56a5 166
rgrover1 710:b2e1a2660ec2 167 /*
rgrover1 710:b2e1a2660ec2 168 * The following functions are meant to be overridden in the platform-specific sub-class.
rgrover1 710:b2e1a2660ec2 169 */
rgrover1 710:b2e1a2660ec2 170 public:
rgrover1 710:b2e1a2660ec2 171 /**
rgrover1 710:b2e1a2660ec2 172 * Set the BTLE MAC address and type. Please note that the address format is
vcoubard 1079:6e2d9514f3df 173 * least significant byte first (LSB). Please refer to BLEProtocol::Address_t.
rgrover1 710:b2e1a2660ec2 174 *
rgrover1 710:b2e1a2660ec2 175 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 176 */
vcoubard 1079:6e2d9514f3df 177 virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::Address_t address) {
rgrover1 734:4872b70437ce 178 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 179 (void)type;
rgrover1 734:4872b70437ce 180 (void)address;
rgrover1 734:4872b70437ce 181
rgrover1 728:997ba5e7b3b6 182 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 183 }
rgrover1 710:b2e1a2660ec2 184
rgrover1 710:b2e1a2660ec2 185 /**
rgrover1 710:b2e1a2660ec2 186 * Fetch the BTLE MAC address and type.
rgrover1 710:b2e1a2660ec2 187 *
rgrover1 710:b2e1a2660ec2 188 * @return BLE_ERROR_NONE on success.
rgrover1 710:b2e1a2660ec2 189 */
vcoubard 1079:6e2d9514f3df 190 virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::Address_t address) {
vcoubard 1048:efb29faf12fc 191 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 192 (void)typeP;
rgrover1 734:4872b70437ce 193 (void)address;
rgrover1 734:4872b70437ce 194
rgrover1 728:997ba5e7b3b6 195 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 196 }
rgrover1 710:b2e1a2660ec2 197
rgrover1 710:b2e1a2660ec2 198 /**
vcoubard 1056:ce2fb3d09929 199 * @return Minimum Advertising interval in milliseconds for connectable
vcoubard 1056:ce2fb3d09929 200 * undirected and connectable directed event types.
rgrover1 710:b2e1a2660ec2 201 */
rgrover1 710:b2e1a2660ec2 202 virtual uint16_t getMinAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 203 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 204 }
rgrover1 710:b2e1a2660ec2 205
rgrover1 710:b2e1a2660ec2 206 /**
vcoubard 1056:ce2fb3d09929 207 * @return Minimum Advertising interval in milliseconds for scannable
vcoubard 1056:ce2fb3d09929 208 * undirected and non-connectable undirected event types.
rgrover1 710:b2e1a2660ec2 209 */
rgrover1 710:b2e1a2660ec2 210 virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 211 return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 212 }
rgrover1 710:b2e1a2660ec2 213
rgrover1 710:b2e1a2660ec2 214 /**
rgrover1 710:b2e1a2660ec2 215 * @return Maximum Advertising interval in milliseconds.
rgrover1 710:b2e1a2660ec2 216 */
rgrover1 710:b2e1a2660ec2 217 virtual uint16_t getMaxAdvertisingInterval(void) const {
rgrover1 742:861ed7eb186d 218 return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 219 }
rgrover1 710:b2e1a2660ec2 220
rgrover1 710:b2e1a2660ec2 221 virtual ble_error_t stopAdvertising(void) {
rgrover1 728:997ba5e7b3b6 222 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 223 }
rgrover1 710:b2e1a2660ec2 224
rgrover1 710:b2e1a2660ec2 225 /**
rgrover1 710:b2e1a2660ec2 226 * Stop scanning. The current scanning parameters remain in effect.
rgrover1 710:b2e1a2660ec2 227 *
rgrover1 710:b2e1a2660ec2 228 * @retval BLE_ERROR_NONE if successfully stopped scanning procedure.
rgrover1 710:b2e1a2660ec2 229 */
rgrover1 710:b2e1a2660ec2 230 virtual ble_error_t stopScan() {
rgrover1 728:997ba5e7b3b6 231 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 232 }
rgrover1 710:b2e1a2660ec2 233
rgrover1 710:b2e1a2660ec2 234 /**
rgrover1 710:b2e1a2660ec2 235 * Create a connection (GAP Link Establishment).
rgrover1 710:b2e1a2660ec2 236 *
rgrover1 710:b2e1a2660ec2 237 * @param peerAddr
rgrover1 710:b2e1a2660ec2 238 * 48-bit address, LSB format.
rgrover1 710:b2e1a2660ec2 239 * @param peerAddrType
rgrover1 710:b2e1a2660ec2 240 * Address type of the peer.
rgrover1 710:b2e1a2660ec2 241 * @param connectionParams
rgrover1 710:b2e1a2660ec2 242 * Connection parameters.
rgrover1 710:b2e1a2660ec2 243 * @param scanParams
rgrover1 710:b2e1a2660ec2 244 * Paramters to be used while scanning for the peer.
rgrover1 710:b2e1a2660ec2 245 * @return BLE_ERROR_NONE if connection establishment procedure is started
rgrover1 829:9072de50087b 246 * successfully. The connectionCallChain (if set) will be invoked upon
rgrover1 710:b2e1a2660ec2 247 * a connection event.
rgrover1 710:b2e1a2660ec2 248 */
vcoubard 1079:6e2d9514f3df 249 virtual ble_error_t connect(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 250 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 251 const ConnectionParams_t *connectionParams,
vcoubard 1079:6e2d9514f3df 252 const GapScanningParams *scanParams) {
vcoubard 1048:efb29faf12fc 253 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 254 (void)peerAddr;
rgrover1 734:4872b70437ce 255 (void)peerAddrType;
rgrover1 734:4872b70437ce 256 (void)connectionParams;
rgrover1 734:4872b70437ce 257 (void)scanParams;
rgrover1 734:4872b70437ce 258
rgrover1 728:997ba5e7b3b6 259 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 260 }
rgrover1 710:b2e1a2660ec2 261
rgrover1 710:b2e1a2660ec2 262 /**
rgrover1 710:b2e1a2660ec2 263 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 264 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 265 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 266 *
rgrover1 710:b2e1a2660ec2 267 * @param reason
vcoubard 1048:efb29faf12fc 268 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 269 */
rgrover1 710:b2e1a2660ec2 270 virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
rgrover1 734:4872b70437ce 271 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 272 (void)connectionHandle;
rgrover1 734:4872b70437ce 273 (void)reason;
rgrover1 734:4872b70437ce 274
rgrover1 728:997ba5e7b3b6 275 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 276 }
rgrover1 710:b2e1a2660ec2 277
rgrover1 710:b2e1a2660ec2 278 /**
rgrover1 710:b2e1a2660ec2 279 * This call initiates the disconnection procedure, and its completion will
rgrover1 710:b2e1a2660ec2 280 * be communicated to the application with an invocation of the
rgrover1 710:b2e1a2660ec2 281 * disconnectionCallback.
rgrover1 710:b2e1a2660ec2 282 *
rgrover1 710:b2e1a2660ec2 283 * @param reason
vcoubard 1048:efb29faf12fc 284 * The reason for disconnection; to be sent back to the peer.
rgrover1 710:b2e1a2660ec2 285 *
vcoubard 1048:efb29faf12fc 286 * @note: This version of disconnect() doesn't take a connection handle. It
vcoubard 1048:efb29faf12fc 287 * works reliably only for stacks that are limited to a single
rgrover1 710:b2e1a2660ec2 288 * connection. This API should be considered *deprecated* in favour of the
vcoubard 1048:efb29faf12fc 289 * alternative, which takes a connection handle. It will be dropped in the future.
rgrover1 710:b2e1a2660ec2 290 */
rgrover1 710:b2e1a2660ec2 291 virtual ble_error_t disconnect(DisconnectionReason_t reason) {
vcoubard 1048:efb29faf12fc 292 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 293 (void)reason;
rgrover1 734:4872b70437ce 294
rgrover1 728:997ba5e7b3b6 295 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 296 }
rgrover1 710:b2e1a2660ec2 297
rgrover1 710:b2e1a2660ec2 298 /**
rgrover1 710:b2e1a2660ec2 299 * Get the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 300 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 301 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 302 *
rgrover1 710:b2e1a2660ec2 303 * @param[out] params
rgrover1 710:b2e1a2660ec2 304 * The structure where the parameters will be stored. Memory
rgrover1 710:b2e1a2660ec2 305 * for this is owned by the caller.
rgrover1 710:b2e1a2660ec2 306 *
rgrover1 710:b2e1a2660ec2 307 * @return BLE_ERROR_NONE if the parameters were successfully filled into
rgrover1 710:b2e1a2660ec2 308 * the given structure pointed to by params.
rgrover1 710:b2e1a2660ec2 309 */
rgrover1 710:b2e1a2660ec2 310 virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 311 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 312 (void)params;
rgrover1 734:4872b70437ce 313
rgrover1 728:997ba5e7b3b6 314 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 315 }
rgrover1 710:b2e1a2660ec2 316
rgrover1 710:b2e1a2660ec2 317 /**
rgrover1 710:b2e1a2660ec2 318 * Set the GAP peripheral preferred connection parameters. These are the
rgrover1 710:b2e1a2660ec2 319 * defaults that the peripheral would like to have in a connection. The
rgrover1 710:b2e1a2660ec2 320 * choice of the connection parameters is eventually up to the central.
rgrover1 710:b2e1a2660ec2 321 *
rgrover1 710:b2e1a2660ec2 322 * @param[in] params
rgrover1 710:b2e1a2660ec2 323 * The structure containing the desired parameters.
rgrover1 710:b2e1a2660ec2 324 */
rgrover1 710:b2e1a2660ec2 325 virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
vcoubard 1048:efb29faf12fc 326 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 327 (void)params;
rgrover1 734:4872b70437ce 328
rgrover1 728:997ba5e7b3b6 329 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 330 }
rgrover1 710:b2e1a2660ec2 331
rgrover1 710:b2e1a2660ec2 332 /**
rgrover1 816:2b4f0ef8c06e 333 * Update connection parameters.
vcoubard 1048:efb29faf12fc 334 * In the central role this will initiate a Link Layer connection parameter update procedure.
vcoubard 1048:efb29faf12fc 335 * In the peripheral role, this will send the corresponding L2CAP request and wait for
rgrover1 816:2b4f0ef8c06e 336 * the central to perform the procedure.
rgrover1 816:2b4f0ef8c06e 337 *
rgrover1 710:b2e1a2660ec2 338 * @param[in] handle
vcoubard 1048:efb29faf12fc 339 * Connection Handle.
rgrover1 710:b2e1a2660ec2 340 * @param[in] params
rgrover1 710:b2e1a2660ec2 341 * Pointer to desired connection parameters. If NULL is provided on a peripheral role,
rgrover1 710:b2e1a2660ec2 342 * the parameters in the PPCP characteristic of the GAP service will be used instead.
rgrover1 710:b2e1a2660ec2 343 */
rgrover1 710:b2e1a2660ec2 344 virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
rgrover1 734:4872b70437ce 345 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 346 (void)handle;
rgrover1 734:4872b70437ce 347 (void)params;
rgrover1 734:4872b70437ce 348
rgrover1 728:997ba5e7b3b6 349 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 350 }
rgrover1 710:b2e1a2660ec2 351
rgrover1 710:b2e1a2660ec2 352 /**
rgrover1 710:b2e1a2660ec2 353 * Set the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 354 * @param[in] deviceName
rgrover1 710:b2e1a2660ec2 355 * The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
rgrover1 710:b2e1a2660ec2 356 */
rgrover1 710:b2e1a2660ec2 357 virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
vcoubard 1048:efb29faf12fc 358 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 359 (void)deviceName;
rgrover1 734:4872b70437ce 360
rgrover1 728:997ba5e7b3b6 361 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 362 }
rgrover1 710:b2e1a2660ec2 363
rgrover1 710:b2e1a2660ec2 364 /**
rgrover1 710:b2e1a2660ec2 365 * Get the value of the device name characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 366 * @param[out] deviceName
rgrover1 710:b2e1a2660ec2 367 * Pointer to an empty buffer where the UTF-8 *non NULL-
rgrover1 710:b2e1a2660ec2 368 * terminated* string will be placed. Set this
rgrover1 710:b2e1a2660ec2 369 * value to NULL in order to obtain the deviceName-length
rgrover1 710:b2e1a2660ec2 370 * from the 'length' parameter.
rgrover1 710:b2e1a2660ec2 371 *
rgrover1 710:b2e1a2660ec2 372 * @param[in/out] lengthP
rgrover1 710:b2e1a2660ec2 373 * (on input) Length of the buffer pointed to by deviceName;
rgrover1 710:b2e1a2660ec2 374 * (on output) the complete device name length (without the
rgrover1 710:b2e1a2660ec2 375 * null terminator).
rgrover1 710:b2e1a2660ec2 376 *
rgrover1 710:b2e1a2660ec2 377 * @note If the device name is longer than the size of the supplied buffer,
rgrover1 710:b2e1a2660ec2 378 * length will return the complete device name length, and not the
rgrover1 710:b2e1a2660ec2 379 * number of bytes actually returned in deviceName. The application may
rgrover1 710:b2e1a2660ec2 380 * use this information to retry with a suitable buffer size.
rgrover1 710:b2e1a2660ec2 381 */
rgrover1 710:b2e1a2660ec2 382 virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
rgrover1 734:4872b70437ce 383 /* avoid compiler warnings about unused variables */
rgrover1 734:4872b70437ce 384 (void)deviceName;
rgrover1 734:4872b70437ce 385 (void)lengthP;
rgrover1 734:4872b70437ce 386
rgrover1 728:997ba5e7b3b6 387 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 388 }
rgrover1 710:b2e1a2660ec2 389
rgrover1 710:b2e1a2660ec2 390 /**
rgrover1 710:b2e1a2660ec2 391 * Set the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 392 * @param[in] appearance
rgrover1 710:b2e1a2660ec2 393 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 394 */
rgrover1 710:b2e1a2660ec2 395 virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
vcoubard 1048:efb29faf12fc 396 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 397 (void)appearance;
rgrover1 734:4872b70437ce 398
rgrover1 728:997ba5e7b3b6 399 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 400 }
rgrover1 710:b2e1a2660ec2 401
rgrover1 710:b2e1a2660ec2 402 /**
rgrover1 710:b2e1a2660ec2 403 * Get the appearance characteristic in the GAP service.
rgrover1 710:b2e1a2660ec2 404 * @param[out] appearance
rgrover1 710:b2e1a2660ec2 405 * The new value for the device-appearance.
rgrover1 710:b2e1a2660ec2 406 */
rgrover1 710:b2e1a2660ec2 407 virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
vcoubard 1048:efb29faf12fc 408 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 409 (void)appearanceP;
rgrover1 734:4872b70437ce 410
rgrover1 728:997ba5e7b3b6 411 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 412 }
rgrover1 710:b2e1a2660ec2 413
rgrover1 710:b2e1a2660ec2 414 /**
rgrover1 710:b2e1a2660ec2 415 * Set the radio's transmit power.
rgrover1 710:b2e1a2660ec2 416 * @param[in] txPower Radio transmit power in dBm.
rgrover1 710:b2e1a2660ec2 417 */
rgrover1 710:b2e1a2660ec2 418 virtual ble_error_t setTxPower(int8_t txPower) {
vcoubard 1048:efb29faf12fc 419 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 420 (void)txPower;
rgrover1 734:4872b70437ce 421
rgrover1 728:997ba5e7b3b6 422 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 423 }
rgrover1 710:b2e1a2660ec2 424
rgrover1 710:b2e1a2660ec2 425 /**
rgrover1 710:b2e1a2660ec2 426 * Query the underlying stack for permitted arguments for setTxPower().
rgrover1 710:b2e1a2660ec2 427 *
rgrover1 710:b2e1a2660ec2 428 * @param[out] valueArrayPP
rgrover1 710:b2e1a2660ec2 429 * Out parameter to receive the immutable array of Tx values.
rgrover1 710:b2e1a2660ec2 430 * @param[out] countP
rgrover1 710:b2e1a2660ec2 431 * Out parameter to receive the array's size.
rgrover1 710:b2e1a2660ec2 432 */
rgrover1 710:b2e1a2660ec2 433 virtual void getPermittedTxPowerValues(const int8_t **valueArrayPP, size_t *countP) {
vcoubard 1048:efb29faf12fc 434 /* Avoid compiler warnings about unused variables. */
rgrover1 734:4872b70437ce 435 (void)valueArrayPP;
rgrover1 734:4872b70437ce 436 (void)countP;
rgrover1 734:4872b70437ce 437
rgrover1 742:861ed7eb186d 438 *countP = 0; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 439 }
rgrover1 710:b2e1a2660ec2 440
rgrover1 710:b2e1a2660ec2 441 protected:
rgrover1 710:b2e1a2660ec2 442 /* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
rgrover1 710:b2e1a2660ec2 443 virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
rgrover1 772:b6d27ab66c94 444 (void)scanningParams;
rgrover1 728:997ba5e7b3b6 445 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 710:b2e1a2660ec2 446 }
rgrover1 710:b2e1a2660ec2 447
rgrover1 710:b2e1a2660ec2 448 /*
rgrover1 710:b2e1a2660ec2 449 * APIs with non-virtual implementations.
rgrover1 710:b2e1a2660ec2 450 */
rgrover1 710:b2e1a2660ec2 451 public:
rgrover1 710:b2e1a2660ec2 452 /**
vcoubard 1048:efb29faf12fc 453 * Returns the current GAP state of the device using a bitmask that
vcoubard 1048:efb29faf12fc 454 * describes whether the device is advertising or connected.
rgrover1 710:b2e1a2660ec2 455 */
rgrover1 710:b2e1a2660ec2 456 GapState_t getState(void) const {
rgrover1 710:b2e1a2660ec2 457 return state;
rgrover1 710:b2e1a2660ec2 458 }
rgrover1 710:b2e1a2660ec2 459
rgrover1 710:b2e1a2660ec2 460 /**
rgrover1 710:b2e1a2660ec2 461 * Set the GAP advertising mode to use for this device.
rgrover1 710:b2e1a2660ec2 462 */
rgrover1 710:b2e1a2660ec2 463 void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
rgrover1 710:b2e1a2660ec2 464 _advParams.setAdvertisingType(advType);
rgrover1 710:b2e1a2660ec2 465 }
rgrover1 710:b2e1a2660ec2 466
rgrover1 710:b2e1a2660ec2 467 /**
rgrover1 710:b2e1a2660ec2 468 * @param[in] interval
rgrover1 710:b2e1a2660ec2 469 * Advertising interval in units of milliseconds. Advertising
rgrover1 710:b2e1a2660ec2 470 * is disabled if interval is 0. If interval is smaller than
rgrover1 710:b2e1a2660ec2 471 * the minimum supported value, then the minimum supported
rgrover1 710:b2e1a2660ec2 472 * value is used instead. This minimum value can be discovered
rgrover1 710:b2e1a2660ec2 473 * using getMinAdvertisingInterval().
rgrover1 710:b2e1a2660ec2 474 *
rgrover1 710:b2e1a2660ec2 475 * This field must be set to 0 if connectionMode is equal
rgrover1 710:b2e1a2660ec2 476 * to ADV_CONNECTABLE_DIRECTED.
rgrover1 710:b2e1a2660ec2 477 *
rgrover1 710:b2e1a2660ec2 478 * @note: Decreasing this value will allow central devices to detect a
vcoubard 1048:efb29faf12fc 479 * peripheral faster, at the expense of more power being used by the radio
rgrover1 710:b2e1a2660ec2 480 * due to the higher data transmit rate.
rgrover1 710:b2e1a2660ec2 481 *
rgrover1 710:b2e1a2660ec2 482 * @Note: [WARNING] This API previously used 0.625ms as the unit for its
rgrover1 710:b2e1a2660ec2 483 * 'interval' argument. That required an explicit conversion from
rgrover1 710:b2e1a2660ec2 484 * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
rgrover1 710:b2e1a2660ec2 485 * no longer required as the new units are milliseconds. Any application
vcoubard 1048:efb29faf12fc 486 * code depending on the old semantics needs to be updated accordingly.
rgrover1 710:b2e1a2660ec2 487 */
rgrover1 710:b2e1a2660ec2 488 void setAdvertisingInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 489 if (interval == 0) {
rgrover1 710:b2e1a2660ec2 490 stopAdvertising();
rgrover1 710:b2e1a2660ec2 491 } else if (interval < getMinAdvertisingInterval()) {
rgrover1 710:b2e1a2660ec2 492 interval = getMinAdvertisingInterval();
rgrover1 710:b2e1a2660ec2 493 }
rgrover1 786:d6d7087d8377 494 _advParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 495 }
rgrover1 710:b2e1a2660ec2 496
rgrover1 710:b2e1a2660ec2 497 /**
rgrover1 710:b2e1a2660ec2 498 * @param[in] timeout
rgrover1 710:b2e1a2660ec2 499 * Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
rgrover1 710:b2e1a2660ec2 500 * and 16383). Use 0 to disable the advertising timeout.
rgrover1 710:b2e1a2660ec2 501 */
rgrover1 710:b2e1a2660ec2 502 void setAdvertisingTimeout(uint16_t timeout) {
rgrover1 710:b2e1a2660ec2 503 _advParams.setTimeout(timeout);
rgrover1 710:b2e1a2660ec2 504 }
rgrover1 710:b2e1a2660ec2 505
rgrover1 710:b2e1a2660ec2 506 /**
rgrover1 710:b2e1a2660ec2 507 * Start advertising.
rgrover1 710:b2e1a2660ec2 508 */
rgrover1 710:b2e1a2660ec2 509 ble_error_t startAdvertising(void) {
vcoubard 1048:efb29faf12fc 510 setAdvertisingData(); /* Update the underlying stack. */
rgrover1 710:b2e1a2660ec2 511 return startAdvertising(_advParams);
rgrover1 710:b2e1a2660ec2 512 }
rgrover1 710:b2e1a2660ec2 513
rgrover1 710:b2e1a2660ec2 514 /**
rgrover1 710:b2e1a2660ec2 515 * Reset any advertising payload prepared from prior calls to
rgrover1 710:b2e1a2660ec2 516 * accumulateAdvertisingPayload(). This automatically propagates the re-
vcoubard 1048:efb29faf12fc 517 * initialized advertising payload to the underlying stack.
rgrover1 710:b2e1a2660ec2 518 */
rgrover1 710:b2e1a2660ec2 519 void clearAdvertisingPayload(void) {
rgrover1 710:b2e1a2660ec2 520 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 521 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 522 }
rgrover1 710:b2e1a2660ec2 523
rgrover1 710:b2e1a2660ec2 524 /**
rgrover1 710:b2e1a2660ec2 525 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 526 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 527 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 528 * small.
rgrover1 710:b2e1a2660ec2 529 *
rgrover1 710:b2e1a2660ec2 530 * @param[in] flags
rgrover1 710:b2e1a2660ec2 531 * The flags to be added. Please refer to
rgrover1 710:b2e1a2660ec2 532 * GapAdvertisingData::Flags for valid flags. Multiple
rgrover1 710:b2e1a2660ec2 533 * flags may be specified in combination.
rgrover1 710:b2e1a2660ec2 534 */
rgrover1 710:b2e1a2660ec2 535 ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
rgrover1 710:b2e1a2660ec2 536 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 537 if ((rc = _advPayload.addFlags(flags)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 538 return rc;
rgrover1 710:b2e1a2660ec2 539 }
rgrover1 710:b2e1a2660ec2 540
rgrover1 710:b2e1a2660ec2 541 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 542 }
rgrover1 710:b2e1a2660ec2 543
rgrover1 710:b2e1a2660ec2 544 /**
rgrover1 710:b2e1a2660ec2 545 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 546 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 547 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 548 * small.
rgrover1 710:b2e1a2660ec2 549 *
rgrover1 710:b2e1a2660ec2 550 * @param app
rgrover1 710:b2e1a2660ec2 551 * The appearance of the peripheral.
rgrover1 710:b2e1a2660ec2 552 */
rgrover1 710:b2e1a2660ec2 553 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
rgrover1 710:b2e1a2660ec2 554 setAppearance(app);
rgrover1 710:b2e1a2660ec2 555
rgrover1 710:b2e1a2660ec2 556 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 557 if ((rc = _advPayload.addAppearance(app)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 558 return rc;
rgrover1 710:b2e1a2660ec2 559 }
rgrover1 710:b2e1a2660ec2 560
rgrover1 710:b2e1a2660ec2 561 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 562 }
rgrover1 710:b2e1a2660ec2 563
rgrover1 710:b2e1a2660ec2 564 /**
rgrover1 710:b2e1a2660ec2 565 * Accumulate an AD structure in the advertising payload. Please note that
rgrover1 710:b2e1a2660ec2 566 * the payload is limited to 31 bytes. The SCAN_RESPONSE message may be used
vcoubard 1048:efb29faf12fc 567 * as an additional 31 bytes if the advertising payload is too
rgrover1 710:b2e1a2660ec2 568 * small.
rgrover1 710:b2e1a2660ec2 569 *
vcoubard 1048:efb29faf12fc 570 * @param power
rgrover1 764:1e560f0d45e1 571 * The max transmit power to be used by the controller (in dBm).
rgrover1 710:b2e1a2660ec2 572 */
rgrover1 710:b2e1a2660ec2 573 ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
rgrover1 710:b2e1a2660ec2 574 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 575 if ((rc = _advPayload.addTxPower(power)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 576 return rc;
rgrover1 710:b2e1a2660ec2 577 }
rgrover1 710:b2e1a2660ec2 578
rgrover1 710:b2e1a2660ec2 579 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 580 }
rgrover1 710:b2e1a2660ec2 581
rgrover1 710:b2e1a2660ec2 582 /**
rgrover1 710:b2e1a2660ec2 583 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 584 * advertising payload. Please note that the payload is limited to 31 bytes.
rgrover1 710:b2e1a2660ec2 585 * The SCAN_RESPONSE message may be used as an additional 31 bytes if the
vcoubard 1048:efb29faf12fc 586 * advertising payload is too small.
rgrover1 710:b2e1a2660ec2 587 *
vcoubard 1048:efb29faf12fc 588 * @param type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 589 * @param data Data bytes.
vcoubard 1048:efb29faf12fc 590 * @param len Length of data.
rgrover1 710:b2e1a2660ec2 591 */
rgrover1 710:b2e1a2660ec2 592 ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 593 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 710:b2e1a2660ec2 594 setDeviceName(data);
rgrover1 710:b2e1a2660ec2 595 }
rgrover1 710:b2e1a2660ec2 596
rgrover1 710:b2e1a2660ec2 597 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 598 if ((rc = _advPayload.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 599 return rc;
rgrover1 710:b2e1a2660ec2 600 }
rgrover1 710:b2e1a2660ec2 601
rgrover1 710:b2e1a2660ec2 602 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 603 }
rgrover1 710:b2e1a2660ec2 604
rgrover1 710:b2e1a2660ec2 605 /**
rgrover1 765:4cd91998cd48 606 * Update a particular ADV field in the advertising payload (based on
rgrover1 765:4cd91998cd48 607 * matching type and length). Note: the length of the new data must be the
rgrover1 765:4cd91998cd48 608 * same as the old one.
rgrover1 763:36c3e2b1f1ae 609 *
vcoubard 1048:efb29faf12fc 610 * @param[in] type The ADV type field describing the variable length data.
vcoubard 1048:efb29faf12fc 611 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 612 * @param[in] len Length of data.
rgrover1 765:4cd91998cd48 613 *
rgrover1 765:4cd91998cd48 614 * @note: If advertisements are enabled, then the update will take effect immediately.
rgrover1 765:4cd91998cd48 615 *
rgrover1 765:4cd91998cd48 616 * @return BLE_ERROR_NONE if the advertisement payload was updated based on
vcoubard 1048:efb29faf12fc 617 * a <type, len> match; otherwise, an appropriate error.
rgrover1 763:36c3e2b1f1ae 618 */
rgrover1 763:36c3e2b1f1ae 619 ble_error_t updateAdvertisingPayload(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 763:36c3e2b1f1ae 620 if (type == GapAdvertisingData::COMPLETE_LOCAL_NAME) {
rgrover1 763:36c3e2b1f1ae 621 setDeviceName(data);
rgrover1 763:36c3e2b1f1ae 622 }
rgrover1 763:36c3e2b1f1ae 623
rgrover1 763:36c3e2b1f1ae 624 ble_error_t rc;
rgrover1 763:36c3e2b1f1ae 625 if ((rc = _advPayload.updateData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 763:36c3e2b1f1ae 626 return rc;
rgrover1 763:36c3e2b1f1ae 627 }
rgrover1 763:36c3e2b1f1ae 628
rgrover1 763:36c3e2b1f1ae 629 return setAdvertisingData();
rgrover1 763:36c3e2b1f1ae 630 }
rgrover1 763:36c3e2b1f1ae 631
rgrover1 763:36c3e2b1f1ae 632 /**
vcoubard 1048:efb29faf12fc 633 * Set up a particular, user-constructed advertisement payload for the
rgrover1 710:b2e1a2660ec2 634 * underlying stack. It would be uncommon for this API to be used directly;
rgrover1 710:b2e1a2660ec2 635 * there are other APIs to build an advertisement payload (see above).
rgrover1 710:b2e1a2660ec2 636 */
rgrover1 710:b2e1a2660ec2 637 ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
rgrover1 710:b2e1a2660ec2 638 _advPayload = payload;
rgrover1 710:b2e1a2660ec2 639 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 640 }
rgrover1 710:b2e1a2660ec2 641
rgrover1 710:b2e1a2660ec2 642 /**
rgrover1 710:b2e1a2660ec2 643 * @return Read back advertising data. Useful for storing and
rgrover1 710:b2e1a2660ec2 644 * restoring payload.
rgrover1 710:b2e1a2660ec2 645 */
rgrover1 710:b2e1a2660ec2 646 const GapAdvertisingData &getAdvertisingPayload(void) const {
rgrover1 710:b2e1a2660ec2 647 return _advPayload;
rgrover1 710:b2e1a2660ec2 648 }
rgrover1 710:b2e1a2660ec2 649
rgrover1 710:b2e1a2660ec2 650 /**
rgrover1 710:b2e1a2660ec2 651 * Accumulate a variable length byte-stream as an AD structure in the
rgrover1 710:b2e1a2660ec2 652 * scanResponse payload.
rgrover1 710:b2e1a2660ec2 653 *
vcoubard 1048:efb29faf12fc 654 * @param[in] type The type describing the variable length data.
vcoubard 1048:efb29faf12fc 655 * @param[in] data Data bytes.
vcoubard 1048:efb29faf12fc 656 * @param[in] len Length of data.
rgrover1 710:b2e1a2660ec2 657 */
rgrover1 710:b2e1a2660ec2 658 ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
rgrover1 710:b2e1a2660ec2 659 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 660 if ((rc = _scanResponse.addData(type, data, len)) != BLE_ERROR_NONE) {
rgrover1 710:b2e1a2660ec2 661 return rc;
rgrover1 710:b2e1a2660ec2 662 }
rgrover1 710:b2e1a2660ec2 663
rgrover1 710:b2e1a2660ec2 664 return setAdvertisingData();
rgrover1 710:b2e1a2660ec2 665 }
rgrover1 710:b2e1a2660ec2 666
rgrover1 710:b2e1a2660ec2 667 /**
rgrover1 710:b2e1a2660ec2 668 * Reset any scan response prepared from prior calls to
rgrover1 710:b2e1a2660ec2 669 * accumulateScanResponse().
rgrover1 710:b2e1a2660ec2 670 *
rgrover1 710:b2e1a2660ec2 671 * Note: This should be followed by a call to setAdvertisingPayload() or
rgrover1 710:b2e1a2660ec2 672 * startAdvertising() before the update takes effect.
rgrover1 710:b2e1a2660ec2 673 */
rgrover1 710:b2e1a2660ec2 674 void clearScanResponse(void) {
rgrover1 710:b2e1a2660ec2 675 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 676 setAdvertisingData();
rgrover1 710:b2e1a2660ec2 677 }
rgrover1 710:b2e1a2660ec2 678
rgrover1 710:b2e1a2660ec2 679 /**
vcoubard 1048:efb29faf12fc 680 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 681 * @param[in] interval
rgrover1 710:b2e1a2660ec2 682 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 683 * @param[in] window
rgrover1 710:b2e1a2660ec2 684 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 685 * @param[in] timeout
vcoubard 1048:efb29faf12fc 686 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 687 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 688 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 689 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 690 *
rgrover1 710:b2e1a2660ec2 691 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 692 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 693 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 694 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 695 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 696 * interval.
rgrover1 710:b2e1a2660ec2 697 *
rgrover1 710:b2e1a2660ec2 698 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 699 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 700 *
rgrover1 710:b2e1a2660ec2 701 * @Note: The scan interval and window are recommendations to the BLE stack.
rgrover1 710:b2e1a2660ec2 702 */
rgrover1 710:b2e1a2660ec2 703 ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
rgrover1 710:b2e1a2660ec2 704 uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
rgrover1 710:b2e1a2660ec2 705 uint16_t timeout = 0,
rgrover1 710:b2e1a2660ec2 706 bool activeScanning = false) {
rgrover1 710:b2e1a2660ec2 707 ble_error_t rc;
rgrover1 710:b2e1a2660ec2 708 if (((rc = _scanningParams.setInterval(interval)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 709 ((rc = _scanningParams.setWindow(window)) == BLE_ERROR_NONE) &&
rgrover1 710:b2e1a2660ec2 710 ((rc = _scanningParams.setTimeout(timeout)) == BLE_ERROR_NONE)) {
rgrover1 710:b2e1a2660ec2 711 _scanningParams.setActiveScanning(activeScanning);
rgrover1 710:b2e1a2660ec2 712 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 713 }
rgrover1 710:b2e1a2660ec2 714
rgrover1 710:b2e1a2660ec2 715 return rc;
rgrover1 710:b2e1a2660ec2 716 }
rgrover1 710:b2e1a2660ec2 717
rgrover1 710:b2e1a2660ec2 718 /**
vcoubard 1048:efb29faf12fc 719 * Set up the scanInterval parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 720 * @param[in] interval
rgrover1 710:b2e1a2660ec2 721 * Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 722 *
rgrover1 710:b2e1a2660ec2 723 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 724 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 725 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 726 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 727 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 728 * interval.
rgrover1 710:b2e1a2660ec2 729 *
rgrover1 710:b2e1a2660ec2 730 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 731 * enabled by using startScan().
rgrover1 710:b2e1a2660ec2 732 */
rgrover1 710:b2e1a2660ec2 733 ble_error_t setScanInterval(uint16_t interval) {
rgrover1 710:b2e1a2660ec2 734 return _scanningParams.setInterval(interval);
rgrover1 710:b2e1a2660ec2 735 }
rgrover1 710:b2e1a2660ec2 736
rgrover1 710:b2e1a2660ec2 737 /**
vcoubard 1048:efb29faf12fc 738 * Set up the scanWindow parameter for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 739 * @param[in] window
rgrover1 710:b2e1a2660ec2 740 * Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
rgrover1 710:b2e1a2660ec2 741 *
rgrover1 710:b2e1a2660ec2 742 * The scanning window divided by the interval determines the duty cycle for
rgrover1 710:b2e1a2660ec2 743 * scanning. For example, if the interval is 100ms and the window is 10ms,
rgrover1 710:b2e1a2660ec2 744 * then the controller will scan for 10 percent of the time. It is possible
rgrover1 710:b2e1a2660ec2 745 * to have the interval and window set to the same value. In this case,
rgrover1 710:b2e1a2660ec2 746 * scanning is continuous, with a change of scanning frequency once every
rgrover1 710:b2e1a2660ec2 747 * interval.
rgrover1 710:b2e1a2660ec2 748 *
rgrover1 710:b2e1a2660ec2 749 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 750 * enabled by using startScan().
rgrover1 770:079b714e9c1a 751 *
rgrover1 770:079b714e9c1a 752 * If scanning is already active, the updated value of scanWindow will be
rgrover1 770:079b714e9c1a 753 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 754 */
rgrover1 710:b2e1a2660ec2 755 ble_error_t setScanWindow(uint16_t window) {
rgrover1 770:079b714e9c1a 756 ble_error_t rc;
rgrover1 770:079b714e9c1a 757 if ((rc = _scanningParams.setWindow(window)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 758 return rc;
rgrover1 770:079b714e9c1a 759 }
rgrover1 770:079b714e9c1a 760
rgrover1 770:079b714e9c1a 761 /* If scanning is already active, propagate the new setting to the stack. */
rgrover1 770:079b714e9c1a 762 if (scanningActive) {
rgrover1 770:079b714e9c1a 763 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 764 }
rgrover1 770:079b714e9c1a 765
rgrover1 770:079b714e9c1a 766 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 767 }
rgrover1 710:b2e1a2660ec2 768
rgrover1 710:b2e1a2660ec2 769 /**
vcoubard 1048:efb29faf12fc 770 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 771 * @param[in] timeout
vcoubard 1048:efb29faf12fc 772 * Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
rgrover1 710:b2e1a2660ec2 773 *
rgrover1 710:b2e1a2660ec2 774 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 775 * enabled by using startScan().
rgrover1 770:079b714e9c1a 776 *
rgrover1 770:079b714e9c1a 777 * If scanning is already active, the updated value of scanTimeout will be
rgrover1 770:079b714e9c1a 778 * propagated to the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 779 */
rgrover1 710:b2e1a2660ec2 780 ble_error_t setScanTimeout(uint16_t timeout) {
rgrover1 770:079b714e9c1a 781 ble_error_t rc;
rgrover1 770:079b714e9c1a 782 if ((rc = _scanningParams.setTimeout(timeout)) != BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 783 return rc;
rgrover1 770:079b714e9c1a 784 }
rgrover1 770:079b714e9c1a 785
rgrover1 770:079b714e9c1a 786 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 787 if (scanningActive) {
rgrover1 770:079b714e9c1a 788 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 789 }
rgrover1 770:079b714e9c1a 790
rgrover1 770:079b714e9c1a 791 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 792 }
rgrover1 710:b2e1a2660ec2 793
rgrover1 710:b2e1a2660ec2 794 /**
vcoubard 1048:efb29faf12fc 795 * Set up parameters for GAP scanning (observer mode).
rgrover1 710:b2e1a2660ec2 796 * @param[in] activeScanning
rgrover1 710:b2e1a2660ec2 797 * Set to True if active-scanning is required. This is used to fetch the
rgrover1 710:b2e1a2660ec2 798 * scan response from a peer if possible.
rgrover1 710:b2e1a2660ec2 799 *
rgrover1 710:b2e1a2660ec2 800 * Once the scanning parameters have been configured, scanning can be
rgrover1 710:b2e1a2660ec2 801 * enabled by using startScan().
rgrover1 770:079b714e9c1a 802 *
rgrover1 770:079b714e9c1a 803 * If scanning is already in progress, then active-scanning will be enabled
rgrover1 770:079b714e9c1a 804 * for the underlying BLE stack.
rgrover1 710:b2e1a2660ec2 805 */
rgrover1 770:079b714e9c1a 806 ble_error_t setActiveScanning(bool activeScanning) {
rgrover1 710:b2e1a2660ec2 807 _scanningParams.setActiveScanning(activeScanning);
rgrover1 770:079b714e9c1a 808
rgrover1 770:079b714e9c1a 809 /* If scanning is already active, propagate the new settings to the stack. */
rgrover1 770:079b714e9c1a 810 if (scanningActive) {
rgrover1 770:079b714e9c1a 811 return startRadioScan(_scanningParams);
rgrover1 770:079b714e9c1a 812 }
rgrover1 770:079b714e9c1a 813
rgrover1 770:079b714e9c1a 814 return BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 815 }
rgrover1 710:b2e1a2660ec2 816
rgrover1 710:b2e1a2660ec2 817 /**
rgrover1 710:b2e1a2660ec2 818 * Start scanning (Observer Procedure) based on the parameters currently in
rgrover1 710:b2e1a2660ec2 819 * effect.
rgrover1 710:b2e1a2660ec2 820 *
rgrover1 710:b2e1a2660ec2 821 * @param[in] callback
vcoubard 1048:efb29faf12fc 822 * The application-specific callback to be invoked upon
rgrover1 710:b2e1a2660ec2 823 * receiving every advertisement report. This can be passed in
rgrover1 710:b2e1a2660ec2 824 * as NULL, in which case scanning may not be enabled at all.
rgrover1 710:b2e1a2660ec2 825 */
rgrover1 710:b2e1a2660ec2 826 ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 827 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 828 if (callback) {
rgrover1 710:b2e1a2660ec2 829 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 830 scanningActive = true;
rgrover1 710:b2e1a2660ec2 831 onAdvertisementReport.attach(callback);
rgrover1 710:b2e1a2660ec2 832 }
rgrover1 710:b2e1a2660ec2 833 }
rgrover1 710:b2e1a2660ec2 834
rgrover1 710:b2e1a2660ec2 835 return err;
rgrover1 710:b2e1a2660ec2 836 }
rgrover1 710:b2e1a2660ec2 837
rgrover1 710:b2e1a2660ec2 838 /**
rgrover1 710:b2e1a2660ec2 839 * Same as above, but this takes an (object, method) pair for a callback.
rgrover1 710:b2e1a2660ec2 840 */
rgrover1 710:b2e1a2660ec2 841 template<typename T>
rgrover1 710:b2e1a2660ec2 842 ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
rgrover1 710:b2e1a2660ec2 843 ble_error_t err = BLE_ERROR_NONE;
rgrover1 710:b2e1a2660ec2 844 if (object && callbackMember) {
rgrover1 710:b2e1a2660ec2 845 if ((err = startRadioScan(_scanningParams)) == BLE_ERROR_NONE) {
rgrover1 770:079b714e9c1a 846 scanningActive = true;
rgrover1 710:b2e1a2660ec2 847 onAdvertisementReport.attach(object, callbackMember);
rgrover1 710:b2e1a2660ec2 848 }
rgrover1 710:b2e1a2660ec2 849 }
rgrover1 710:b2e1a2660ec2 850
rgrover1 710:b2e1a2660ec2 851 return err;
rgrover1 710:b2e1a2660ec2 852 }
rgrover1 710:b2e1a2660ec2 853
rgrover1 753:0f60274cd3ad 854 /**
rgrover1 753:0f60274cd3ad 855 * Initialize radio-notification events to be generated from the stack.
vcoubard 1048:efb29faf12fc 856 * This API doesn't need to be called directly.
rgrover1 753:0f60274cd3ad 857 *
rgrover1 753:0f60274cd3ad 858 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 753:0f60274cd3ad 859 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 860 * radio is in use.
rgrover1 753:0f60274cd3ad 861 *
vcoubard 1048:efb29faf12fc 862 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 863 * signal is sent at the end of the radio event. These signals can be used
rgrover1 753:0f60274cd3ad 864 * by the application programmer to synchronize application logic with radio
rgrover1 753:0f60274cd3ad 865 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 866 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 753:0f60274cd3ad 867 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 753:0f60274cd3ad 868 *
rgrover1 753:0f60274cd3ad 869 * @return BLE_ERROR_NONE on successful initialization, otherwise an error code.
rgrover1 753:0f60274cd3ad 870 */
rgrover1 753:0f60274cd3ad 871 virtual ble_error_t initRadioNotification(void) {
rgrover1 753:0f60274cd3ad 872 return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
rgrover1 753:0f60274cd3ad 873 }
rgrover1 753:0f60274cd3ad 874
rgrover1 710:b2e1a2660ec2 875 private:
rgrover1 710:b2e1a2660ec2 876 ble_error_t setAdvertisingData(void) {
rgrover1 710:b2e1a2660ec2 877 return setAdvertisingData(_advPayload, _scanResponse);
rgrover1 710:b2e1a2660ec2 878 }
rgrover1 710:b2e1a2660ec2 879
rgrover1 710:b2e1a2660ec2 880 private:
rgrover1 896:791741895cd8 881 virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
rgrover1 896:791741895cd8 882 virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
rgrover1 710:b2e1a2660ec2 883
rgrover1 710:b2e1a2660ec2 884 public:
rgrover1 710:b2e1a2660ec2 885 /**
rgrover1 710:b2e1a2660ec2 886 * Accessors to read back currently active advertising params.
rgrover1 710:b2e1a2660ec2 887 */
rgrover1 710:b2e1a2660ec2 888 GapAdvertisingParams &getAdvertisingParams(void) {
rgrover1 710:b2e1a2660ec2 889 return _advParams;
rgrover1 710:b2e1a2660ec2 890 }
rgrover1 710:b2e1a2660ec2 891 const GapAdvertisingParams &getAdvertisingParams(void) const {
rgrover1 710:b2e1a2660ec2 892 return _advParams;
rgrover1 710:b2e1a2660ec2 893 }
rgrover1 710:b2e1a2660ec2 894
rgrover1 710:b2e1a2660ec2 895 /**
vcoubard 1048:efb29faf12fc 896 * Set up a particular, user-constructed set of advertisement parameters for
rgrover1 710:b2e1a2660ec2 897 * the underlying stack. It would be uncommon for this API to be used
rgrover1 710:b2e1a2660ec2 898 * directly; there are other APIs to tweak advertisement parameters
rgrover1 710:b2e1a2660ec2 899 * individually.
rgrover1 710:b2e1a2660ec2 900 */
rgrover1 710:b2e1a2660ec2 901 void setAdvertisingParams(const GapAdvertisingParams &newParams) {
rgrover1 710:b2e1a2660ec2 902 _advParams = newParams;
rgrover1 710:b2e1a2660ec2 903 }
rgrover1 710:b2e1a2660ec2 904
rgrover1 710:b2e1a2660ec2 905 /* Event callback handlers. */
rgrover1 710:b2e1a2660ec2 906 public:
rgrover1 710:b2e1a2660ec2 907 /**
vcoubard 1048:efb29faf12fc 908 * Set up a callback for timeout events. Refer to TimeoutSource_t for
rgrover1 710:b2e1a2660ec2 909 * possible event types.
vcoubard 1052:b55e1ad3e1b3 910 * @note It is possible to unregister callbacks using onTimeout().detach(callback)
rgrover1 710:b2e1a2660ec2 911 */
vcoubard 1052:b55e1ad3e1b3 912 void onTimeout(TimeoutEventCallback_t callback) {
vcoubard 1052:b55e1ad3e1b3 913 timeoutCallbackChain.add(callback);
vcoubard 1052:b55e1ad3e1b3 914 }
vcoubard 1052:b55e1ad3e1b3 915
vcoubard 1052:b55e1ad3e1b3 916 /**
vcoubard 1052:b55e1ad3e1b3 917 * @brief provide access to the callchain of timeout event callbacks
vcoubard 1052:b55e1ad3e1b3 918 * It is possible to register callbacks using onTimeout().add(callback);
vcoubard 1054:f59e5d9a992a 919 * It is possible to unregister callbacks using onTimeout().detach(callback)
vcoubard 1052:b55e1ad3e1b3 920 * @return The timeout event callbacks chain
vcoubard 1052:b55e1ad3e1b3 921 */
vcoubard 1052:b55e1ad3e1b3 922 TimeoutEventCallbackChain_t& onTimeout() {
vcoubard 1052:b55e1ad3e1b3 923 return timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 924 }
rgrover1 710:b2e1a2660ec2 925
rgrover1 710:b2e1a2660ec2 926 /**
rgrover1 829:9072de50087b 927 * Append to a chain of callbacks to be invoked upon GAP connection.
vcoubard 1052:b55e1ad3e1b3 928 * @note It is possible to unregister callbacks using onConnection().detach(callback)
rgrover1 710:b2e1a2660ec2 929 */
rgrover1 829:9072de50087b 930 void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
rgrover1 710:b2e1a2660ec2 931
rgrover1 829:9072de50087b 932 template<typename T>
rgrover1 829:9072de50087b 933 void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 934
rgrover1 710:b2e1a2660ec2 935 /**
vcoubard 1052:b55e1ad3e1b3 936 * @brief provide access to the callchain of connection event callbacks
vcoubard 1052:b55e1ad3e1b3 937 * It is possible to register callbacks using onConnection().add(callback);
vcoubard 1054:f59e5d9a992a 938 * It is possible to unregister callbacks using onConnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 939 * @return The connection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 940 */
vcoubard 1054:f59e5d9a992a 941 ConnectionEventCallbackChain_t& onConnection() {
vcoubard 1052:b55e1ad3e1b3 942 return connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 943 }
vcoubard 1052:b55e1ad3e1b3 944
vcoubard 1052:b55e1ad3e1b3 945 /**
rgrover1 829:9072de50087b 946 * Append to a chain of callbacks to be invoked upon GAP disconnection.
vcoubard 1052:b55e1ad3e1b3 947 * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
rgrover1 816:2b4f0ef8c06e 948 */
rgrover1 829:9072de50087b 949 void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
rgrover1 816:2b4f0ef8c06e 950
rgrover1 710:b2e1a2660ec2 951 template<typename T>
rgrover1 829:9072de50087b 952 void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
rgrover1 710:b2e1a2660ec2 953
rgrover1 710:b2e1a2660ec2 954 /**
vcoubard 1052:b55e1ad3e1b3 955 * @brief provide access to the callchain of disconnection event callbacks
vcoubard 1052:b55e1ad3e1b3 956 * It is possible to register callbacks using onDisconnection().add(callback);
vcoubard 1054:f59e5d9a992a 957 * It is possible to unregister callbacks using onDisconnection().detach(callback)
vcoubard 1052:b55e1ad3e1b3 958 * @return The disconnection event callbacks chain
vcoubard 1052:b55e1ad3e1b3 959 */
vcoubard 1052:b55e1ad3e1b3 960 DisconnectionEventCallbackChain_t& onDisconnection() {
vcoubard 1052:b55e1ad3e1b3 961 return disconnectionCallChain;
vcoubard 1052:b55e1ad3e1b3 962 }
vcoubard 1052:b55e1ad3e1b3 963
vcoubard 1052:b55e1ad3e1b3 964 /**
rgrover1 710:b2e1a2660ec2 965 * Set the application callback for radio-notification events.
rgrover1 710:b2e1a2660ec2 966 *
rgrover1 710:b2e1a2660ec2 967 * Radio Notification is a feature that enables ACTIVE and INACTIVE
rgrover1 710:b2e1a2660ec2 968 * (nACTIVE) signals from the stack that notify the application when the
rgrover1 753:0f60274cd3ad 969 * radio is in use.
rgrover1 710:b2e1a2660ec2 970 *
vcoubard 1048:efb29faf12fc 971 * The ACTIVE signal is sent before the radio event starts. The nACTIVE
vcoubard 1048:efb29faf12fc 972 * signal is sent at the end of the radio event. These signals can be used
rgrover1 710:b2e1a2660ec2 973 * by the application programmer to synchronize application logic with radio
rgrover1 710:b2e1a2660ec2 974 * activity. For example, the ACTIVE signal can be used to shut off external
vcoubard 1048:efb29faf12fc 975 * devices, to manage peak current drawn during periods when the radio is on,
rgrover1 710:b2e1a2660ec2 976 * or to trigger sensor data collection for transmission in the Radio Event.
rgrover1 710:b2e1a2660ec2 977 *
rgrover1 710:b2e1a2660ec2 978 * @param callback
rgrover1 710:b2e1a2660ec2 979 * The application handler to be invoked in response to a radio
rgrover1 710:b2e1a2660ec2 980 * ACTIVE/INACTIVE event.
rgrover1 754:9b391fb5c5d7 981 *
vcoubard 1048:efb29faf12fc 982 * Or in the other version:
rgrover1 754:9b391fb5c5d7 983 *
rgrover1 754:9b391fb5c5d7 984 * @param tptr
rgrover1 754:9b391fb5c5d7 985 * Pointer to the object of a class defining the member callback
rgrover1 754:9b391fb5c5d7 986 * function (mptr).
rgrover1 754:9b391fb5c5d7 987 * @param mptr
rgrover1 754:9b391fb5c5d7 988 * The member callback (within the context of an object) to be
rgrover1 754:9b391fb5c5d7 989 * invoked in response to a radio ACTIVE/INACTIVE event.
rgrover1 710:b2e1a2660ec2 990 */
rgrover1 753:0f60274cd3ad 991 void onRadioNotification(void (*callback)(bool param)) {
rgrover1 753:0f60274cd3ad 992 radioNotificationCallback.attach(callback);
rgrover1 753:0f60274cd3ad 993 }
rgrover1 753:0f60274cd3ad 994 template <typename T>
rgrover1 753:0f60274cd3ad 995 void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
rgrover1 753:0f60274cd3ad 996 radioNotificationCallback.attach(tptr, mptr);
rgrover1 753:0f60274cd3ad 997 }
rgrover1 710:b2e1a2660ec2 998
vcoubard 1090:148d8b9b56a5 999 /**
vcoubard 1090:148d8b9b56a5 1000 * Setup a callback to be invoked to notify the user application that the
vcoubard 1090:148d8b9b56a5 1001 * Gap instance is about to shutdown (possibly as a result of a call
vcoubard 1090:148d8b9b56a5 1002 * to BLE::shutdown()).
vcoubard 1090:148d8b9b56a5 1003 *
vcoubard 1090:148d8b9b56a5 1004 * @Note: It is possible to chain together multiple onShutdown callbacks
vcoubard 1090:148d8b9b56a5 1005 * (potentially from different modules of an application) to be notified
vcoubard 1090:148d8b9b56a5 1006 * before the Gap instance is shutdown.
vcoubard 1090:148d8b9b56a5 1007 *
vcoubard 1090:148d8b9b56a5 1008 * @Note: It is also possible to set up a callback into a member function of
vcoubard 1090:148d8b9b56a5 1009 * some object.
vcoubard 1090:148d8b9b56a5 1010 *
vcoubard 1090:148d8b9b56a5 1011 * @Note It is possible to unregister a callback using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1012 */
vcoubard 1090:148d8b9b56a5 1013 void onShutdown(const GapShutdownCallback_t& callback) {
vcoubard 1090:148d8b9b56a5 1014 shutdownCallChain.add(callback);
vcoubard 1090:148d8b9b56a5 1015 }
vcoubard 1090:148d8b9b56a5 1016 template <typename T>
vcoubard 1090:148d8b9b56a5 1017 void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
vcoubard 1090:148d8b9b56a5 1018 shutdownCallChain.add(objPtr, memberPtr);
vcoubard 1090:148d8b9b56a5 1019 }
vcoubard 1090:148d8b9b56a5 1020
vcoubard 1090:148d8b9b56a5 1021 /**
vcoubard 1090:148d8b9b56a5 1022 * @brief provide access to the callchain of shutdown event callbacks
vcoubard 1090:148d8b9b56a5 1023 * It is possible to register callbacks using onShutdown().add(callback);
vcoubard 1090:148d8b9b56a5 1024 * It is possible to unregister callbacks using onShutdown().detach(callback)
vcoubard 1090:148d8b9b56a5 1025 * @return The shutdown event callbacks chain
vcoubard 1090:148d8b9b56a5 1026 */
vcoubard 1090:148d8b9b56a5 1027 GapShutdownCallbackChain_t& onShutdown() {
vcoubard 1090:148d8b9b56a5 1028 return shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1029 }
vcoubard 1090:148d8b9b56a5 1030
vcoubard 1082:127667021827 1031 public:
vcoubard 1082:127667021827 1032 /**
vcoubard 1090:148d8b9b56a5 1033 * Notify all registered onShutdown callbacks that the Gap instance is
vcoubard 1090:148d8b9b56a5 1034 * about to be shutdown and clear all Gap state of the
vcoubard 1090:148d8b9b56a5 1035 * associated object.
vcoubard 1082:127667021827 1036 *
vcoubard 1082:127667021827 1037 * This function is meant to be overridden in the platform-specific
vcoubard 1082:127667021827 1038 * sub-class. Nevertheless, the sub-class is only expected to reset its
vcoubard 1082:127667021827 1039 * state and not the data held in Gap members. This shall be achieved by a
vcoubard 1082:127667021827 1040 * call to Gap::reset() from the sub-class' reset() implementation.
vcoubard 1082:127667021827 1041 *
vcoubard 1082:127667021827 1042 * @return BLE_ERROR_NONE on success.
vcoubard 1082:127667021827 1043 *
vcoubard 1082:127667021827 1044 * @note: Currently a call to reset() does not reset the advertising and
vcoubard 1082:127667021827 1045 * scan parameters to default values.
vcoubard 1082:127667021827 1046 */
vcoubard 1082:127667021827 1047 virtual ble_error_t reset(void) {
vcoubard 1090:148d8b9b56a5 1048 /* Notify that the instance is about to shutdown */
vcoubard 1090:148d8b9b56a5 1049 shutdownCallChain.call(this);
vcoubard 1090:148d8b9b56a5 1050 shutdownCallChain.clear();
vcoubard 1090:148d8b9b56a5 1051
vcoubard 1082:127667021827 1052 /* Clear Gap state */
vcoubard 1082:127667021827 1053 state.advertising = 0;
vcoubard 1084:40c1e518d6de 1054 state.connected = 0;
vcoubard 1082:127667021827 1055
vcoubard 1082:127667021827 1056 /* Clear scanning state */
vcoubard 1082:127667021827 1057 scanningActive = false;
vcoubard 1082:127667021827 1058
vcoubard 1082:127667021827 1059 /* Clear advertising and scanning data */
vcoubard 1082:127667021827 1060 _advPayload.clear();
vcoubard 1082:127667021827 1061 _scanResponse.clear();
vcoubard 1082:127667021827 1062
vcoubard 1082:127667021827 1063 /* Clear callbacks */
vcoubard 1082:127667021827 1064 timeoutCallbackChain.clear();
vcoubard 1082:127667021827 1065 connectionCallChain.clear();
vcoubard 1082:127667021827 1066 disconnectionCallChain.clear();
vcoubard 1082:127667021827 1067 radioNotificationCallback = NULL;
vcoubard 1084:40c1e518d6de 1068 onAdvertisementReport = NULL;
vcoubard 1082:127667021827 1069
vcoubard 1082:127667021827 1070 return BLE_ERROR_NONE;
vcoubard 1082:127667021827 1071 }
vcoubard 1082:127667021827 1072
rgrover1 710:b2e1a2660ec2 1073 protected:
rgrover1 710:b2e1a2660ec2 1074 Gap() :
rgrover1 710:b2e1a2660ec2 1075 _advParams(),
rgrover1 710:b2e1a2660ec2 1076 _advPayload(),
rgrover1 710:b2e1a2660ec2 1077 _scanningParams(),
rgrover1 710:b2e1a2660ec2 1078 _scanResponse(),
rgrover1 710:b2e1a2660ec2 1079 state(),
rgrover1 770:079b714e9c1a 1080 scanningActive(false),
vcoubard 1052:b55e1ad3e1b3 1081 timeoutCallbackChain(),
rgrover1 710:b2e1a2660ec2 1082 radioNotificationCallback(),
rgrover1 710:b2e1a2660ec2 1083 onAdvertisementReport(),
rgrover1 816:2b4f0ef8c06e 1084 connectionCallChain(),
rgrover1 710:b2e1a2660ec2 1085 disconnectionCallChain() {
rgrover1 710:b2e1a2660ec2 1086 _advPayload.clear();
rgrover1 710:b2e1a2660ec2 1087 _scanResponse.clear();
rgrover1 710:b2e1a2660ec2 1088 }
rgrover1 710:b2e1a2660ec2 1089
rgrover1 710:b2e1a2660ec2 1090 /* Entry points for the underlying stack to report events back to the user. */
rgrover1 710:b2e1a2660ec2 1091 public:
vcoubard 1079:6e2d9514f3df 1092 void processConnectionEvent(Handle_t handle,
vcoubard 1079:6e2d9514f3df 1093 Role_t role,
vcoubard 1079:6e2d9514f3df 1094 BLEProtocol::AddressType_t peerAddrType,
vcoubard 1079:6e2d9514f3df 1095 const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1096 BLEProtocol::AddressType_t ownAddrType,
vcoubard 1079:6e2d9514f3df 1097 const BLEProtocol::Address_t ownAddr,
vcoubard 1079:6e2d9514f3df 1098 const ConnectionParams_t *connectionParams) {
rgrover1 710:b2e1a2660ec2 1099 state.connected = 1;
rgrover1 829:9072de50087b 1100 ConnectionCallbackParams_t callbackParams(handle, role, peerAddrType, peerAddr, ownAddrType, ownAddr, connectionParams);
rgrover1 829:9072de50087b 1101 connectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1102 }
rgrover1 710:b2e1a2660ec2 1103
rgrover1 710:b2e1a2660ec2 1104 void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
rgrover1 710:b2e1a2660ec2 1105 state.connected = 0;
rgrover1 829:9072de50087b 1106 DisconnectionCallbackParams_t callbackParams(handle, reason);
rgrover1 829:9072de50087b 1107 disconnectionCallChain.call(&callbackParams);
rgrover1 710:b2e1a2660ec2 1108 }
rgrover1 710:b2e1a2660ec2 1109
vcoubard 1079:6e2d9514f3df 1110 void processAdvertisementReport(const BLEProtocol::Address_t peerAddr,
vcoubard 1079:6e2d9514f3df 1111 int8_t rssi,
vcoubard 1079:6e2d9514f3df 1112 bool isScanResponse,
rgrover1 710:b2e1a2660ec2 1113 GapAdvertisingParams::AdvertisingType_t type,
vcoubard 1079:6e2d9514f3df 1114 uint8_t advertisingDataLen,
vcoubard 1079:6e2d9514f3df 1115 const uint8_t *advertisingData) {
rgrover1 710:b2e1a2660ec2 1116 AdvertisementCallbackParams_t params;
rgrover1 710:b2e1a2660ec2 1117 memcpy(params.peerAddr, peerAddr, ADDR_LEN);
rgrover1 710:b2e1a2660ec2 1118 params.rssi = rssi;
rgrover1 710:b2e1a2660ec2 1119 params.isScanResponse = isScanResponse;
rgrover1 710:b2e1a2660ec2 1120 params.type = type;
rgrover1 710:b2e1a2660ec2 1121 params.advertisingDataLen = advertisingDataLen;
rgrover1 710:b2e1a2660ec2 1122 params.advertisingData = advertisingData;
rgrover1 710:b2e1a2660ec2 1123 onAdvertisementReport.call(&params);
rgrover1 710:b2e1a2660ec2 1124 }
rgrover1 710:b2e1a2660ec2 1125
rgrover1 710:b2e1a2660ec2 1126 void processTimeoutEvent(TimeoutSource_t source) {
vcoubard 1052:b55e1ad3e1b3 1127 if (timeoutCallbackChain) {
vcoubard 1052:b55e1ad3e1b3 1128 timeoutCallbackChain(source);
rgrover1 710:b2e1a2660ec2 1129 }
rgrover1 710:b2e1a2660ec2 1130 }
rgrover1 710:b2e1a2660ec2 1131
rgrover1 710:b2e1a2660ec2 1132 protected:
rgrover1 710:b2e1a2660ec2 1133 GapAdvertisingParams _advParams;
rgrover1 710:b2e1a2660ec2 1134 GapAdvertisingData _advPayload;
rgrover1 710:b2e1a2660ec2 1135 GapScanningParams _scanningParams;
rgrover1 710:b2e1a2660ec2 1136 GapAdvertisingData _scanResponse;
rgrover1 710:b2e1a2660ec2 1137
rgrover1 710:b2e1a2660ec2 1138 GapState_t state;
rgrover1 770:079b714e9c1a 1139 bool scanningActive;
rgrover1 710:b2e1a2660ec2 1140
rgrover1 710:b2e1a2660ec2 1141 protected:
vcoubard 1052:b55e1ad3e1b3 1142 TimeoutEventCallbackChain_t timeoutCallbackChain;
vcoubard 1052:b55e1ad3e1b3 1143 RadioNotificationEventCallback_t radioNotificationCallback;
vcoubard 1052:b55e1ad3e1b3 1144 AdvertisementReportCallback_t onAdvertisementReport;
vcoubard 1052:b55e1ad3e1b3 1145 ConnectionEventCallbackChain_t connectionCallChain;
vcoubard 1052:b55e1ad3e1b3 1146 DisconnectionEventCallbackChain_t disconnectionCallChain;
rgrover1 710:b2e1a2660ec2 1147
rgrover1 710:b2e1a2660ec2 1148 private:
vcoubard 1090:148d8b9b56a5 1149 GapShutdownCallbackChain_t shutdownCallChain;
vcoubard 1090:148d8b9b56a5 1150
vcoubard 1090:148d8b9b56a5 1151 private:
vcoubard 1048:efb29faf12fc 1152 /* Disallow copy and assignment. */
rgrover1 710:b2e1a2660ec2 1153 Gap(const Gap &);
rgrover1 710:b2e1a2660ec2 1154 Gap& operator=(const Gap &);
rgrover1 710:b2e1a2660ec2 1155 };
rgrover1 710:b2e1a2660ec2 1156
rgrover1 710:b2e1a2660ec2 1157 #endif // ifndef __GAP_H__