Diff: nRF51822/common/ble_error.h

Revision:

2:97f1622aef50

Parent:

1:a607cd9655d7

--- a/nRF51822/common/ble_error.h	Fri Oct 10 03:36:28 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,151 +0,0 @@
-/**************************************************************************/
-/*!
-    @file     ble_error.h
-    @author   hathach (tinyusb.org)
-
-    @section LICENSE
-
-    Software License Agreement (BSD License)
-
-    Copyright (c) 2013, K. Townsend (microBuilder.eu)
-    All rights reserved.
-
-    Redistribution and use in source and binary forms, with or without
-    modification, are permitted provided that the following conditions are met:
-    1. Redistributions of source code must retain the above copyright
-    notice, this list of conditions and the following disclaimer.
-    2. Redistributions in binary form must reproduce the above copyright
-    notice, this list of conditions and the following disclaimer in the
-    documentation and/or other materials provided with the distribution.
-    3. Neither the name of the copyright holders nor the
-    names of its contributors may be used to endorse or promote products
-    derived from this software without specific prior written permission.
-
-    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
-    EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
-    DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-    ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*/
-/**************************************************************************/
-
-/** \file
- *  \brief Error Header
- *
- *  \note TBD
- */
-
-/** \ingroup Group_Common
- *  \defgroup Group_Error Error Codes
- *  @{
- */
-
-#ifndef _BLE_ERROR_H_
-#define _BLE_ERROR_H_
-
-#include "projectconfig.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-typedef enum 
-{
-  /*=======================================================================
-    NORDIC GLOBAL ERRORS                                   0x0000 .. 0x00FF
-    -----------------------------------------------------------------------
-    Errors mapped from nrf_error.h
-    -----------------------------------------------------------------------*/
-    ERROR_NONE                                    = 0x0000 , ///< Successful command
-    ERROR_SVC_HANDLER_MISSING                     = 0x0001 , ///< SVC handler is missing
-    ERROR_SOFTDEVICE_NOT_ENABLED                  = 0x0002 , ///< SoftDevice has not been enabled
-    ERROR_INTERNAL                                = 0x0003 , ///< Internal Error
-    ERROR_NO_MEM                                  = 0x0004 , ///< No Memory for operation
-    ERROR_NOT_FOUND                               = 0x0005 , ///< Not found
-    ERROR_NOT_SUPPORTED                           = 0x0006 , ///< Not supported
-    ERROR_INVALID_PARAM                           = 0x0007 , ///< Invalid Parameter
-    ERROR_INVALID_STATE                           = 0x0008 , ///< Invalid state, operation disallowed in this state
-    ERROR_INVALID_LENGTH                          = 0x0009 , ///< Invalid Length
-    ERROR_INVALID_FLAGS                           = 0x000A , ///< Invalid Flags
-    ERROR_INVALID_DATA                            = 0x000B , ///< Invalid Data
-    ERROR_DATA_SIZE                               = 0x000C , ///< Data size exceeds limit
-    ERROR_TIMEOUT                                 = 0x000D , ///< Operation timed out
-    ERROR_NULL                                    = 0x000E , ///< Null Pointer
-    ERROR_FORBIDDEN                               = 0x000F , ///< Forbidden Operation
-    ERROR_INVALID_ADDR                            = 0x0010 , ///< Bad Memory Address
-    ERROR_BUSY                                    = 0x0011 , ///< Busy
-  /*=======================================================================*/
-
-  ERROR_INVALIDPARAMETER                        = 0x0100 , /**< An invalid parameter value was provided */
-  ERROR_I2C_XFER_FAILED                         = 0x0101 , /**< an failed attempt to make I2C transfer */
-
-  /*=======================================================================
-    SIMPLE BINARY PROTOCOL ERRORS                          0x0120 .. 0x013F
-    -----------------------------------------------------------------------
-    Errors relating to the simple binary protocol (/src//protocol)
-    -----------------------------------------------------------------------*/
-    ERROR_PROT_INVALIDMSGTYPE                   = 0x121,  /**< Unexpected msg type encountered */
-    ERROR_PROT_INVALIDCOMMANDID                 = 0x122,  /**< Unknown or out of range command ID */
-    ERROR_PROT_INVALIDPAYLOAD                   = 0x123,  /**< Message payload has a problem (invalid len, etc.) */
-  /*=======================================================================*/
-
-  //------------- based on Nordic SDM nrf_error_sdm.h -------------//
-  ERROR_SDM_LFCLK_SOURCE_UNKNOWN                = 0x1000 , ///< Unknown lfclk source
-  ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATION   = 0x1001 , ///< Incorrect interrupt configuration (can be caused by using illegal priority levels, or having enabled SoftDevice interrupts)
-  ERROR_SDM_INCORRECT_CLENR0                    = 0x1002 , ///< Incorrect CLENR0 (can be caused by erronous SoftDevice flashing)
-
-  //------------- based on Nordic SOC nrf_error_soc.h -------------//
-  /* Mutex Errors */
-  ERROR_SOC_MUTEX_ALREADY_TAKEN                 = 0x2000 ,  ///< Mutex already taken
-
-  /* NVIC errors */
-  ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE        = 0x2001 ,  ///< NVIC interrupt not available
-  ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED = 0x2002 ,  ///< NVIC interrupt priority not allowed
-  ERROR_SOC_NVIC_SHOULD_NOT_RETURN              = 0x2003 ,  ///< NVIC should not return
-
-  /* Power errors */
-  ERROR_SOC_POWER_MODE_UNKNOWN                  = 0x2004 ,  ///< Power mode unknown
-  ERROR_SOC_POWER_POF_THRESHOLD_UNKNOWN         = 0x2005 ,  ///< Power POF threshold unknown
-  ERROR_SOC_POWER_OFF_SHOULD_NOT_RETURN         = 0x2006 ,  ///< Power off should not return
-
-  /* Rand errors */
-  ERROR_SOC_RAND_NOT_ENOUGH_VALUES              = 0x2007 ,  ///< RAND not enough values
-
-  /* PPI errors */
-  ERROR_SOC_PPI_INVALID_CHANNEL                 = 0x2008 ,  ///< Invalid PPI Channel
-  ERROR_SOC_PPI_INVALID_GROUP                   = 0x2009 ,  ///< Invalid PPI Group
-
-  //------------- based on Nordic STK (ble) ble_err.h -------------//
-  ERROR_BLE_INVALID_CONN_HANDLE                 = 0x3001 , /**< Invalid connection handle. */
-  ERROR_BLE_INVALID_ATTR_HANDLE                 = 0x3002 , /**< Invalid attribute handle. */
-  ERROR_BLE_NO_TX_BUFFERS                       = 0x3003 , /**< Buffer capacity exceeded. */
-
-  // L2CAP
-  ERROR_BLE_L2CAP_CID_IN_USE                    = 0x3100 , /**< CID already in use. */
-
-  // GAP
-  ERROR_BLE_GAP_UUID_LIST_MISMATCH              = 0x3200 , /**< UUID list does not contain an integral number of UUIDs. */
-  ERROR_BLE_GAP_DISCOVERABLE_WITH_WHITELIST     = 0x3201 , /**< Use of Whitelist not permitted with discoverable advertising. */
-  ERROR_BLE_GAP_INVALID_BLE_ADDR                = 0x3202 , /**< The upper two bits of the address do not correspond to the specified address type. */
-
-  // GATTC
-  ERROR_BLE_GATTC_PROC_NOT_PERMITTED            = 0x3300 ,
-
-  // GATTS
-  ERROR_BLEGATTS_INVALID_ATTR_TYPE              = 0x3400 , /**< Invalid attribute type. */
-  ERROR_BLEGATTS_SYS_ATTR_MISSING               = 0x3401 , /**< System Attributes missing. */
-
-}error_t;
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _BLE_ERROR_H_ */
-
- /**  @} */