Diff: nRF51822/btle/custom/custom_helper.cpp

Revision:

2:97f1622aef50

Parent:

1:a607cd9655d7

--- a/nRF51822/btle/custom/custom_helper.cpp	Fri Oct 10 03:36:28 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,292 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#include "custom_helper.h"
-
-/*
- * The current version of the soft-device doesn't handle duplicate 128-bit UUIDs
- * very  well. It is therefore necessary to filter away duplicates before
- * passing long UUIDs to sd_ble_uuid_vs_add(). The following types and data
- * structures involved in maintaining a local cache of 128-bit UUIDs.
- */
-typedef struct {
-    LongUUIDBytes_t uuid;
-    uint8_t         type;
-} converted_uuid_table_entry_t;
-static const unsigned UUID_TABLE_MAX_ENTRIES = 8; /* This is the maximum number of 128-bit UUIDs with distinct bases that
-                                                   * we expect to be in use; increase this limit if needed. */
-static unsigned uuidTableEntries = 0; /* current usage of the table */
-converted_uuid_table_entry_t convertedUUIDTable[UUID_TABLE_MAX_ENTRIES];
-
-/**
- * lookup the cache of previously converted 128-bit UUIDs to find a type value.
- * @param  uuid          base 128-bit UUID
- * @param  recoveredType the type field of the 3-byte nRF's uuid.
- * @return               true if a match is found.
- */
-static bool
-lookupConvertedUUIDTable(const LongUUIDBytes_t uuid, uint8_t *recoveredType)
-{
-    unsigned i;
-    for (i = 0; i < uuidTableEntries; i++) {
-        if (memcmp(convertedUUIDTable[i].uuid, uuid, LENGTH_OF_LONG_UUID) == 0) {
-            *recoveredType = convertedUUIDTable[i].type;
-            return true;
-        }
-    }
-
-    return false;
-}
-
-static void
-addToConvertedUUIDTable(const LongUUIDBytes_t uuid, uint8_t type)
-{
-    if (uuidTableEntries == UUID_TABLE_MAX_ENTRIES) {
-        return; /* recovery needed; or at least the user should be warned about this fact.*/
-    }
-
-    memcpy(convertedUUIDTable[uuidTableEntries].uuid, uuid,LENGTH_OF_LONG_UUID);
-    convertedUUIDTable[uuidTableEntries].type = type;
-    uuidTableEntries++;
-}
-
-/**
- * The nRF transport has its own 3-byte representation of a UUID. If the user-
- * specified UUID is 128-bits wide, then the UUID base needs to be added to the
- * soft-device and converted to a 3-byte handle before being used further. This
- * function is responsible for this translation of user-specified UUIDs into
- * nRF's representation.
- *
- * @param[in]  uuid
- *                 user-specified UUID
- * @return nRF
- *              3-byte UUID (containing a type and 16-bit UUID) representation
- *              to be used with SVC calls.
- */
-ble_uuid_t custom_convert_to_nordic_uuid(const UUID &uuid)
-{
-    ble_uuid_t nordicUUID = {
-        .uuid = uuid.getShortUUID(),
-        .type = BLE_UUID_TYPE_UNKNOWN /* to be set below */
-    };
-
-    if (uuid.shortOrLong() == UUID::UUID_TYPE_SHORT) {
-        nordicUUID.type = BLE_UUID_TYPE_BLE;
-    } else {
-        if (!lookupConvertedUUIDTable(uuid.getBaseUUID(), &nordicUUID.type)) {
-            nordicUUID.type = custom_add_uuid_base(uuid.getBaseUUID());
-            addToConvertedUUIDTable(uuid.getBaseUUID(), nordicUUID.type);
-        }
-    }
-
-    return nordicUUID;
-}
-
-/**************************************************************************/
-/*!
-    @brief      Adds the base UUID to the custom service. All UUIDs used
-                by this service are based on this 128-bit UUID.
-
-    @note       This UUID needs to be added to the SoftDevice stack before
-                adding the service's primary service via
-                'sd_ble_gatts_service_add'
-
-    @param[in]  p_uuid_base   A pointer to the 128-bit UUID array (8*16)
-
-    @returns    The UUID type.
-                A return value of 0 should be considered an error.
-
-    @retval     0x00    BLE_UUID_TYPE_UNKNOWN
-    @retval     0x01    BLE_UUID_TYPE_BLE
-    @retval     0x02    BLE_UUID_TYPE_VENDOR_BEGIN
-
-    @section EXAMPLE
-    @code
-
-    // Take note that bytes 2/3 are blank since these are used to identify
-    // the primary service and individual characteristics
-    #define CFG_CUSTOM_UUID_BASE  "\x6E\x40\x00\x00\xB5\xA3\xF3\x93\xE0\xA9\xE5\x0E\x24\xDC\xCA\x9E"
-
-    uint8_t uuid_type = custom_add_uuid_base(CFG_CUSTOM_UUID_BASE);
-    ASSERT(uuid_type > 0, ERROR_NOT_FOUND);
-
-    // We can now safely add the primary service and any characteristics
-    // for our custom service ...
-
-    @endcode
-*/
-/**************************************************************************/
-uint8_t custom_add_uuid_base(uint8_t const *const p_uuid_base)
-{
-    ble_uuid128_t base_uuid;
-    uint8_t       uuid_type = 0;
-
-    /* Reverse the bytes since ble_uuid128_t is LSB */
-    for (uint8_t i = 0; i<16; i++) {
-        base_uuid.uuid128[i] = p_uuid_base[15 - i];
-    }
-
-    ASSERT_INT( ERROR_NONE, sd_ble_uuid_vs_add( &base_uuid, &uuid_type ), 0);
-
-    return uuid_type;
-}
-
-/**************************************************************************/
-/*!
-
-*/
-/**************************************************************************/
-error_t custom_decode_uuid_base(uint8_t const *const p_uuid_base,
-                                ble_uuid_t          *p_uuid)
-{
-    LongUUIDBytes_t uuid_base_le;
-
-    /* Reverse the bytes since ble_uuid128_t is LSB */
-    for (uint8_t i = 0; i<16; i++) {
-        uuid_base_le[i] = p_uuid_base[15 - i];
-    }
-
-    ASSERT_STATUS( sd_ble_uuid_decode(16, uuid_base_le, p_uuid));
-
-    return ERROR_NONE;
-}
-
-/**************************************************************************/
-/*!
-    @brief      Adds a new characteristic to the custom service, assigning
-                properties, a UUID add-on value, etc.
-
-    @param[in]  service_handle
-    @param[in]  p_uuid            The 16-bit value to add to the base UUID
-                                  for this characteristic (normally >1
-                                  since 1 is typically used by the primary
-                                  service).
-    @param[in]  char_props        The characteristic properties, as
-                                  defined by ble_gatt_char_props_t
-    @param[in]  max_length        The maximum length of this characeristic
-    @param[in]  p_char_handle
-
-    @returns
-    @retval     ERROR_NONE        Everything executed normally
-*/
-/**************************************************************************/
-error_t custom_add_in_characteristic(uint16_t    service_handle,
-                                     ble_uuid_t *p_uuid,
-                                     uint8_t     properties,
-                                     uint8_t    *p_data,
-                                     uint16_t    min_length,
-                                     uint16_t    max_length,
-                                     ble_gatts_char_handles_t *p_char_handle)
-{
-    /* Characteristic metadata */
-    ble_gatts_attr_md_t   cccd_md;
-    ble_gatt_char_props_t char_props;
-
-    memcpy(&char_props, &properties, 1);
-
-    if (char_props.notify || char_props.indicate) {
-        /* Notification requires cccd */
-        memclr_( &cccd_md, sizeof(ble_gatts_attr_md_t));
-        cccd_md.vloc = BLE_GATTS_VLOC_STACK;
-        BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.read_perm);
-        BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cccd_md.write_perm);
-    }
-
-    ble_gatts_char_md_t char_md = {0};
-
-    char_md.char_props = char_props;
-    char_md.p_cccd_md  =
-        (char_props.notify || char_props.indicate) ? &cccd_md : NULL;
-
-    /* Attribute declaration */
-    ble_gatts_attr_md_t attr_md = {0};
-
-    attr_md.vloc = BLE_GATTS_VLOC_STACK;
-    attr_md.vlen = (min_length == max_length) ? 0 : 1;
-
-    if (char_props.read || char_props.notify || char_props.indicate) {
-        BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.read_perm);
-    }
-
-    if (char_props.write) {
-        BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
-    }
-
-    ble_gatts_attr_t attr_char_value = {0};
-
-    attr_char_value.p_uuid    = p_uuid;
-    attr_char_value.p_attr_md = &attr_md;
-    attr_char_value.init_len  = min_length;
-    attr_char_value.max_len   = max_length;
-    attr_char_value.p_value   = p_data;
-
-    ASSERT_STATUS ( sd_ble_gatts_characteristic_add(service_handle,
-                                                    &char_md,
-                                                    &attr_char_value,
-                                                    p_char_handle));
-
-    return ERROR_NONE;
-}
-
-
-
-/**************************************************************************/
-/*!
-    @brief      Adds a new descriptor to the custom service, assigning
-                value, a UUID add-on value, etc.
-
-    @param[in]  char_handle
-    @param[in]  p_uuid            The 16-bit value to add to the base UUID
-                                  for this descriptor (normally >1
-                                  since 1 is typically used by the primary
-                                  service).
-    @param[in]  max_length        The maximum length of this descriptor
-
-    @returns
-    @retval     ERROR_NONE        Everything executed normally
-*/
-/**************************************************************************/
-error_t custom_add_in_descriptor(uint16_t    char_handle,
-                                             ble_uuid_t *p_uuid,
-                                             uint8_t    *p_data,
-                                             uint16_t    min_length,
-                                             uint16_t    max_length,
-                                             uint16_t   *p_desc_handle)
-{
-    /* Descriptor metadata */
-    ble_gatts_attr_md_t   desc_md = {0};
-
-    desc_md.vloc = BLE_GATTS_VLOC_STACK;
-    desc_md.vlen = (min_length == max_length) ? 0 : 1;
-
-    /* Make it readable and writable */
-    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&desc_md.read_perm);
-    BLE_GAP_CONN_SEC_MODE_SET_OPEN(&desc_md.write_perm);
-
-    ble_gatts_attr_t attr_desc = {0};
-
-    attr_desc.p_uuid    = p_uuid;
-    attr_desc.p_attr_md = &desc_md;
-    attr_desc.init_len  = min_length;
-    attr_desc.max_len   = max_length;
-    attr_desc.p_value   = p_data;
-
-    ASSERT_STATUS ( sd_ble_gatts_descriptor_add(char_handle,
-                                                &attr_desc,
-                                                p_desc_handle));
-
-    return ERROR_NONE;
-}