The main objective is to reduce loss in revenue due to delayed shelf-restocking (when product is in-stock in the store but not stocked on the shelf) and inaccurate forecasting (under-estimating future product sales) practices. The result is to demonstrate inventory automation using ECIS system by enabling the means to monitor and track store inventory in real-time, perform data analysis remotely in cloud, improve shopping experience for the consumers and increase revenue for the retailers in the retail industry. Machine Learning code can be found on my GitHub: https://github.com/priyankkalgaonkar

Dependencies:   mbed

ECE 53301: Wireless and Multimedia Computing Final Project Report – Group 1

Inventory Automation Using Electronically Connected Intelligent Shelves.

Code Developed by: Priyank Kalgaonkar.

Department of Electrical and Computer Engineering, Purdue School of Engineering and Technology at IUPUI.

Submitted as partial fulfillment for the requirement of Fall 2019 - ECE 53301-26877: Wireless and Multimedia Computing course.

Date of Submission: December 12, 2019.

Revision:
0:b0c4c25d37ab
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/FinalVersionECISsystem/mbed/mbed.h	Thu Dec 12 01:04:52 2019 +0000
@@ -0,0 +1,104 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_H
+#define MBED_H
+
+#define MBED_LIBRARY_VERSION 133
+
+#if MBED_CONF_RTOS_PRESENT
+// RTOS present, this is valid only for mbed OS 5
+#define MBED_MAJOR_VERSION 5
+#define MBED_MINOR_VERSION 3
+#define MBED_PATCH_VERSION 2
+
+#else
+// mbed 2
+#define MBED_MAJOR_VERSION 2
+#define MBED_MINOR_VERSION 0
+#define MBED_PATCH_VERSION MBED_LIBRARY_VERSION
+#endif
+
+#define MBED_ENCODE_VERSION(major, minor, patch) ((major)*10000 + (minor)*100 + (patch))
+
+#define MBED_VERSION MBED_ENCODE_VERSION(MBED_MAJOR_VERSION, MBED_MINOR_VERSION, MBED_PATCH_VERSION)
+
+#if MBED_CONF_RTOS_PRESENT
+#include "rtos/rtos.h"
+#endif
+
+#if MBED_CONF_NSAPI_PRESENT
+#include "netsocket/nsapi.h"
+#endif
+
+#if MBED_CONF_EVENTS_PRESENT
+#include "events/mbed_events.h"
+#endif
+
+#include "platform/toolchain.h"
+#include "platform/platform.h"
+
+// Useful C libraries
+#include <math.h>
+#include <time.h>
+
+// mbed Debug libraries
+#include "platform/mbed_error.h"
+#include "platform/mbed_interface.h"
+#include "platform/mbed_assert.h"
+
+// mbed Peripheral components
+#include "drivers/DigitalIn.h"
+#include "drivers/DigitalOut.h"
+#include "drivers/DigitalInOut.h"
+#include "drivers/BusIn.h"
+#include "drivers/BusOut.h"
+#include "drivers/BusInOut.h"
+#include "drivers/PortIn.h"
+#include "drivers/PortInOut.h"
+#include "drivers/PortOut.h"
+#include "drivers/AnalogIn.h"
+#include "drivers/AnalogOut.h"
+#include "drivers/PwmOut.h"
+#include "drivers/Serial.h"
+#include "drivers/SPI.h"
+#include "drivers/SPISlave.h"
+#include "drivers/I2C.h"
+#include "drivers/I2CSlave.h"
+#include "drivers/Ethernet.h"
+#include "drivers/CAN.h"
+#include "drivers/RawSerial.h"
+
+// mbed Internal components
+#include "drivers/Timer.h"
+#include "drivers/Ticker.h"
+#include "drivers/Timeout.h"
+#include "drivers/LowPowerTimeout.h"
+#include "drivers/LowPowerTicker.h"
+#include "drivers/LowPowerTimer.h"
+#include "drivers/LocalFileSystem.h"
+#include "drivers/InterruptIn.h"
+#include "platform/wait_api.h"
+#include "hal/sleep_api.h"
+#include "platform/rtc_time.h"
+
+// mbed Non-hardware components
+#include "platform/Callback.h"
+#include "platform/FunctionPointer.h"
+
+using namespace mbed;
+using namespace std;
+
+#endif