Pratima Gokhale / Mbed OS Example_EtherCAT_System_Using_EASE

This is an example application demonstrating building an EtherCAT system using Esmacat

Dependencies:   EsmacatShield X_NUCLEO_IHM01A1

Basic Information of Esmacat

Information about Esmacat and EASE is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Homepage

Information about the hardware needs and setup is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Hardware-Setup

Information about the structure of the system and it's software is provided in the link below. https://os.mbed.com/users/pratima_hb/code/EASE_Example/wiki/Software

About this example

This is an example application to demonstrate the ease with which a system, which communicates over EtherCAT, can be build. It measures the RPM of a motor using a proximity sensor.

Following lists the hardware required

  • 2 x Mbed boards with Arduino UNO form factor (NUCLEO-F103RB)
  • 2 x EASE boards
  • 1 x proximity sensor shield (X_NUCLEO_6180XA1)
  • 1 x Motor shield (X-NUCLEO-IHM01A1)
  • 1 x stepper motor
  • 1 x Ethernet POE injector with a 24VDC power supply
  • 2 x Ethernet cables
  • Keyboard, mouse, and monitor
  • PC with Linux/Windows OS installed
  • DC power supply for motor

https://os.mbed.com/media/uploads/pratima_hb/system_pic1.jpg

Click here to know more about this Example

An error occurred while processing your request

shortlog@faa7b7382f2f: not found in manifest