Pratyush Mallick
this is testing
Diff: app/noos_mbed/drivers/dac/ad5686/ad5686.c
- Revision:
- 0:3afcd581558d
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/app/noos_mbed/drivers/dac/ad5686/ad5686.c Thu Jan 14 18:54:16 2021 +0530
@@ -0,0 +1,764 @@
+/***************************************************************************//**
+* @file ad5686.c
+* @brief Implementation of AD5686 Driver.
+* @author Istvan Csomortani (istvan.csomortani@analog.com)
+*******************************************************************************
+* Copyright 2013, 2020(c) Analog Devices, Inc.
+*
+* All rights reserved.
+*
+* Redistribution and use in source and binary forms, with or without
+* modification,
+* are permitted provided that the following conditions are met:
+* - Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+* - Redistributions in binary form must reproduce the above copyright
+* notice, this list of conditions and the following disclaimer in
+* the documentation and/or other materials provided with the
+* distribution.
+* - Neither the name of Analog Devices, Inc. nor the names of its
+* contributors may be used to endorse or promote products derived
+* from this software without specific prior written permission.
+* - The use of this software may or may not infringe the patent rights
+* of one or more patent holders. This license does not release you
+* from the requirement that you obtain separate licenses from these
+* patent holders to use this software.
+* - Use of the software either in source or binary form, must be run
+* on or directly connected to an Analog Devices Inc. component.
+*
+* THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+* IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+* INCIDENTAL,SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+* * LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS
+* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+* DAMAGE.
+*
+******************************************************************************/
+
+/*****************************************************************************/
+/***************************** Include Files *********************************/
+/*****************************************************************************/
+#include <stdlib.h>
+#include "ad5686.h"
+
+/*****************************************************************************/
+/***************************** Constant definition ***************************/
+/*****************************************************************************/
+static const uint32_t ad5683_channel_addr [] = {
+ [AD5686_CH_0] = 0,
+};
+
+static const uint32_t ad5689_channel_addr[] = {
+ [AD5686_CH_0] = 1,
+ [AD5686_CH_1] = 8,
+};
+
+static const uint32_t ad5686_channel_addr[] = {
+ [AD5686_CH_0] = 1,
+ [AD5686_CH_1] = 2,
+ [AD5686_CH_2] = 4,
+ [AD5686_CH_3] = 8,
+};
+
+static const uint32_t ad5676_channel_addr[] = {
+ [AD5686_CH_0] = 0,
+ [AD5686_CH_1] = 1,
+ [AD5686_CH_2] = 2,
+ [AD5686_CH_3] = 3,
+ [AD5686_CH_4] = 4,
+ [AD5686_CH_5] = 5,
+ [AD5686_CH_6] = 6,
+ [AD5686_CH_7] = 7,
+};
+
+static const uint32_t ad5679_channel_addr[] = {
+ [AD5686_CH_0] = 0,
+ [AD5686_CH_1] = 1,
+ [AD5686_CH_2] = 2,
+ [AD5686_CH_3] = 3,
+ [AD5686_CH_4] = 4,
+ [AD5686_CH_5] = 5,
+ [AD5686_CH_6] = 6,
+ [AD5686_CH_7] = 7,
+ [AD5686_CH_8] = 8,
+ [AD5686_CH_9] = 9,
+ [AD5686_CH_10] = 10,
+ [AD5686_CH_11] = 11,
+ [AD5686_CH_12] = 12,
+ [AD5686_CH_13] = 13,
+ [AD5686_CH_14] = 14,
+ [AD5686_CH_15] = 15,
+};
+
+static const struct ad5686_chip_info chip_info[] = {
+ [ID_AD5671R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5676_channel_addr,
+ },
+ [ID_AD5672R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5676_channel_addr,
+ },
+ [ID_AD5673R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5674] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5674R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5675R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5676_channel_addr,
+ },
+ [ID_AD5676] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5676_channel_addr,
+ },
+ [ID_AD5676R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5676_channel_addr,
+ },
+ [ID_AD5677R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5679] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5679R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5679_channel_addr,
+ },
+ [ID_AD5684R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5685R] = {
+ .resolution = 14,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5686] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5686R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5687] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5689_channel_addr,
+ },
+ [ID_AD5687R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5689_channel_addr,
+ },
+ [ID_AD5689] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5689_channel_addr,
+ },
+ [ID_AD5689R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5689_channel_addr,
+ },
+ [ID_AD5697R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5689_channel_addr,
+ },
+ [ID_AD5694] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5694R] = {
+ .resolution = 12,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5695R] = {
+ .resolution = 14,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5696] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5696R] = {
+ .resolution = 16,
+ .register_map = AD5686_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5686_channel_addr,
+ },
+ [ID_AD5681R] = {
+ .resolution = 12,
+ .register_map = AD5683_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5682R] = {
+ .resolution = 14,
+ .register_map = AD5683_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5683R] = {
+ .resolution = 16,
+ .register_map = AD5683_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5683] = {
+ .resolution = 16,
+ .register_map = AD5683_REG_MAP,
+ .communication = SPI,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5691R] = {
+ .resolution = 12,
+ .register_map = AD5683_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5692R] = {
+ .resolution = 14,
+ .register_map = AD5683_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5693R] = {
+ .resolution = 16,
+ .register_map = AD5683_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5683_channel_addr,
+ },
+ [ID_AD5693] = {
+ .resolution = 16,
+ .register_map = AD5683_REG_MAP,
+ .communication = I2C,
+ .channel_addr = ad5683_channel_addr,
+ }
+};
+
+/***************************************************************************//**
+ * @brief Initializes the communication peripheral and the initial Values for
+ * AD5686 Board.
+ *
+ * @param device - The device structure.
+ * @param init_param - The structure that contains the device initial
+ * parameters.
+ *
+ * @return ret - The result of the initialization procedure.
+ * Example: -1 - I2C peripheral was not initialized or the
+ * device is not present.
+ * 0 - I2C peripheral was initialized and the
+ * device is present.
+*******************************************************************************/
+int32_t ad5686_init(struct ad5686_dev **device,
+ struct ad5686_init_param init_param)
+{
+ struct ad5686_dev *dev;
+ int32_t ret;
+
+ dev = (struct ad5686_dev *)malloc(sizeof(*dev));
+ if (!dev)
+ return -1;
+
+ dev->act_device = init_param.act_device;
+ dev->power_down_mask = 0;
+ dev->ldac_mask = 0;
+
+ if (chip_info[dev->act_device].communication == SPI)
+ ret = spi_init(&dev->spi_desc, &init_param.spi_init);
+ else
+ ret = i2c_init(&dev->i2c_desc, &init_param.i2c_init);
+
+
+ /* GPIO */
+ ret |= gpio_get(&dev->gpio_reset, &init_param.gpio_reset);
+ ret |= gpio_get(&dev->gpio_ldac, &init_param.gpio_ldac);
+ ret |= gpio_get(&dev->gpio_gain, &init_param.gpio_gain);
+
+ if (dev->gpio_ldac)
+ ret |= gpio_direction_output(dev->gpio_ldac, GPIO_LOW);
+
+ if (dev->gpio_reset)
+ ret |= gpio_direction_output(dev->gpio_reset, GPIO_HIGH);
+
+ if (dev->gpio_gain)
+ ret |= gpio_direction_output(dev->gpio_gain, GPIO_LOW);
+ *device = dev;
+
+ return ret;
+}
+
+/***************************************************************************//**
+ * @brief Free the resources allocated by ad5686_init().
+ *
+ * @param dev - The device structure.
+ *
+ * @return ret - The result of the remove procedure.
+*******************************************************************************/
+int32_t ad5686_remove(struct ad5686_dev *dev)
+{
+ int32_t ret;
+
+ if (chip_info[dev->act_device].communication == SPI)
+ ret = spi_remove(dev->spi_desc);
+ else
+ ret = i2c_remove(dev->i2c_desc);
+
+ if (dev->gpio_ldac)
+ ret |= gpio_remove(dev->gpio_ldac);
+
+ if (dev->gpio_reset)
+ ret |= gpio_remove(dev->gpio_reset);
+
+ if (dev->gpio_gain)
+ ret |= gpio_remove(dev->gpio_gain);
+
+ free(dev);
+
+ return ret;
+}
+
+/**************************************************************************//**
+ * @brief Write to input shift register.
+ *
+ * @param dev - The device structure.
+ * @param command - Command control bits.
+ * @param address - The address bits.
+ * @param data - Data to be written in input register.
+ *
+ * @return read_back_data - value read from register.
+******************************************************************************/
+uint16_t ad5686_set_shift_reg(struct ad5686_dev *dev,
+ uint8_t command,
+ uint8_t address,
+ uint16_t data)
+{
+ uint8_t data_buff [ PKT_LENGTH ] = {0, 0, 0};
+ uint16_t read_back_data = 0;
+
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP) {
+ data_buff[0] = ((command & AD5686_CMD_MASK) << CMD_OFFSET) | \
+ (address & ADDR_MASK);
+ data_buff[1] = (data & AD5686_MSB_MASK) >> AD5686_MSB_OFFSET;
+ data_buff[2] = (data & AD5686_LSB_MASK);
+ } else {
+ data_buff[0] = ((command & AD5683_CMD_MASK) << CMD_OFFSET) |
+ ((data >> AD5683_MSB_OFFSET) & AD5683_MSB_MASK);
+ data_buff[1] = (data >> AD5683_MIDB_OFFSET) & AD5683_MIDB_MASK;
+ data_buff[2] = (data & AD5683_LSB_MASK) << AD5683_LSB_OFFSET;
+ }
+
+ if(chip_info[dev->act_device].communication == SPI) {
+ spi_write_and_read(dev->spi_desc, data_buff, PKT_LENGTH);
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP)
+ read_back_data = (data_buff[1] << AD5686_MSB_OFFSET) | data_buff[2];
+ else
+ read_back_data = (data_buff[0] & AD5683_CMD_MASK) << AD5683_MSB_OFFSET |
+ data_buff[1] << AD5683_MIDB_OFFSET |
+ data_buff[2] >> AD5683_LSB_OFFSET;
+ } else
+ i2c_write(dev->i2c_desc, data_buff, PKT_LENGTH, 1);
+
+ return read_back_data;
+}
+
+/**************************************************************************//**
+ * @brief Write to Input Register n (dependent on LDAC)
+ *
+ * @param dev - The device structure.
+ * @param channel - The chosen channel to write to.
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @param data - desired value to be written in register.
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_write_register(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel,
+ uint16_t data)
+{
+ uint8_t data_offset = MAX_RESOLUTION - \
+ chip_info[dev->act_device].resolution;
+ uint8_t address = chip_info[dev->act_device].channel_addr[channel];
+
+ ad5686_set_shift_reg(dev, AD5686_CTRL_WRITE, address,
+ data << data_offset);
+}
+
+/**************************************************************************//**
+ * @brief Update DAC Register n with contents of Input Register n
+ *
+ * @param dev - The device structure.
+ * @param channel - The chosen channel to write to.
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @return None.
+******************************************************************************/
+void ad5686_update_register(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel)
+{
+ uint8_t address = chip_info[dev->act_device].channel_addr[channel];
+
+ ad5686_set_shift_reg(dev, AD5686_CTRL_UPDATE, address, 0);
+}
+
+/**************************************************************************//**
+ * @brief Write to and update DAC channel n
+ *
+ * @param dev - The device structure.
+ * @param channel - The chosen channel to write to.
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @param data - Desired value to be written in register.
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_write_update_register(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel,
+ uint16_t data)
+{
+ uint8_t data_offset = MAX_RESOLUTION - \
+ chip_info[dev->act_device].resolution;
+ uint8_t address = chip_info[dev->act_device].channel_addr[channel];
+
+ ad5686_set_shift_reg(dev, AD5686_CTRL_WRITEUPDATE, address,
+ data << data_offset);
+}
+
+/**************************************************************************//**
+ * @brief Read back Input Register n
+ *
+ * @param dev - The device structure.
+ * @param channel - The channel which will be read back. Note: only one
+ * channel should be selected, if there will be selected
+ * more than one channel, the channel A will be read back
+ * by default
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @return read_back_data - value read from register.
+******************************************************************************/
+uint16_t ad5686_read_back_register(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel)
+{
+
+ uint16_t read_back_data = 0;
+ uint16_t offset = MAX_RESOLUTION - \
+ chip_info[dev->act_device].resolution;
+ uint8_t address = chip_info[dev->act_device].channel_addr[channel];
+ uint8_t rb_data_i2c[3] = { 0 };
+
+ if(chip_info[dev->act_device].communication == SPI) {
+ ad5686_set_shift_reg(dev, AD5686_CTRL_RB_REG, address, 0);
+ read_back_data = ad5686_set_shift_reg(dev, AD5686_CTRL_NOP, 0,
+ 0);
+ read_back_data >>= offset;
+ } else {
+ if (chip_info[dev->act_device].register_map == AD5683_REG_MAP)
+ rb_data_i2c[0] = (AD5683_CTRL_RB_REG << CMD_OFFSET) |
+ address;
+ else
+ rb_data_i2c[0] = (AD5686_CTRL_RB_REG << CMD_OFFSET) |
+ address;
+
+ i2c_write(dev->i2c_desc, rb_data_i2c, 3, 0);
+ i2c_read(dev->i2c_desc, rb_data_i2c, 2, 1);
+ read_back_data = (rb_data_i2c[0] << 8) | rb_data_i2c[1];
+ }
+
+ return read_back_data;
+}
+
+/**************************************************************************//**
+ * @brief Set Power-down mode for DAC channel n
+ *
+ * @param dev - The device structure.
+ * @param channel - The chosen channel to change the power-down mode.
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @param mode - Power-down operation modes.
+ * Accepted values:
+ * 'AD5686_PWRM_NORMAL' - Normal Mode
+ * 'AD5686_PWRM_1K' - Power-down mode 1kOhm to GND
+ * 'AD5686_PWRM_100K' - Power-down mode 100kOhm to GND
+ * 'AD5686_PWRM_THREESTATE' - Three-State
+ * 'AD5686_PWRM_100K' is not available for AD5674R/AD5679R.
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_power_mode(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel,
+ uint8_t mode)
+{
+ uint8_t address = chip_info[dev->act_device].channel_addr[channel];
+
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP) {
+ /* AD5674R/AD5679R have 16 channels and 2 powerdown registers */
+ if (channel > AD5686_CH_7)
+ channel -= AD5686_CH_7 + 1;
+ dev->power_down_mask &= ~(0x3 << (channel *2));
+ dev->power_down_mask |= (mode << (channel *2));
+ ad5686_set_shift_reg(dev, AD5686_CTRL_PWR, address,
+ dev->power_down_mask);
+ } else {
+ ad5686_set_shift_reg(dev, AD5683_CMD_WR_CTRL_REG, address,
+ AD5683_CTRL_PWRM(mode));
+ }
+
+}
+
+/**************************************************************************//**
+ * @brief Set hardware LDAC mask register
+ *
+ * @param dev - The device structure.
+ * @param channel - In case of which channel ignore transitions on the LDAC
+ * pin.
+ * Accepted values: AD5686_CH_0
+ * AD5686_CH_1
+ * AD5686_CH_2
+ * AD5686_CH_3
+ * AD5686_CH_4
+ * AD5686_CH_5
+ * AD5686_CH_6
+ * AD5686_CH_7
+ * AD5686_CH_8
+ * AD5686_CH_9
+ * AD5686_CH_10
+ * AD5686_CH_11
+ * AD5686_CH_12
+ * AD5686_CH_13
+ * AD5686_CH_14
+ * AD5686_CH_15
+ * @param enable - Enable/disable channel.
+ * @return None.
+******************************************************************************/
+void ad5686_ldac_mask(struct ad5686_dev *dev,
+ enum ad5686_dac_channels channel,
+ uint8_t enable)
+{
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP) {
+ dev->ldac_mask &= ~(0x1 << channel);
+ dev->ldac_mask |= (enable << channel);
+ ad5686_set_shift_reg(dev, AD5686_CTRL_LDAC_MASK, 0, dev->ldac_mask);
+ }
+}
+
+/**************************************************************************//**
+ * @brief Software reset (power-on reset)
+ *
+ * @param dev - The device structure.
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_software_reset(struct ad5686_dev *dev)
+{
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP)
+ ad5686_set_shift_reg(dev, AD5686_CTRL_SWRESET, 0, 0);
+ else
+ ad5686_set_shift_reg(dev, AD5683_CMD_WR_CTRL_REG, 0, AD5683_SW_RESET);
+}
+
+
+/**************************************************************************//**
+ * @brief Write to Internal reference setup register
+ *
+ * @param dev - The device structure.
+ * @param value - The internal reference register value
+ * Example : 'AD5686_INTREF_EN' - enable internal reference
+ * 'AD5686_INTREF_DIS' - disable internal reference
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_internal_reference(struct ad5686_dev *dev,
+ uint8_t value)
+{
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP)
+ ad5686_set_shift_reg(dev, AD5686_CTRL_IREF_REG, 0, value);
+ else
+ ad5686_set_shift_reg(dev, AD5683_CMD_WR_CTRL_REG, 0,
+ AD5683_CTRL_INT_REF(value));
+}
+
+/**************************************************************************//**
+ * @brief Set up DCEN register (daisy-chain enable)
+ *
+ * @param dev - The device structure.
+ * @param value - Enable or disable daisy-chain mode
+ * Example : 'AD5686_DC_EN' - daisy-chain enable
+ * 'AD5686_DC_DIS' - daisy-chain disable
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_daisy_chain_en(struct ad5686_dev *dev,
+ uint8_t value)
+{
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP)
+ ad5686_set_shift_reg(dev, AD5686_CTRL_DCEN, 0, value);
+ else
+ ad5686_set_shift_reg(dev, AD5683_CMD_WR_CTRL_REG, 0, AD5683_CTRL_DCEN(value));
+}
+
+/**************************************************************************//**
+ * @brief Set up readback register (readback enable)
+ *
+ * @param dev - The device structure.
+ * @param value - Enable or disable daisy-chain mode
+ * Example : 'AD5686_RB_EN' - daisy-chain enable
+ * 'AD5686_RB_DIS' - daisy-chain disable
+ *
+ * @return None.
+******************************************************************************/
+void ad5686_read_back_en(struct ad5686_dev *dev,
+ uint8_t value)
+{
+ if(chip_info[dev->act_device].register_map == AD5686_REG_MAP)
+ ad5686_set_shift_reg(dev, AD5686_CTRL_RB_REG, 0, value);
+}
+
+/**************************************************************************//**
+ * @brief Set Gain mode
+ *
+ * @param dev - The device structure.
+ * @param value - Gain modes.
+ * Accepted values:
+ * Example : 'AD5683_GB_VREF' - 0V to VREF
+ * 'AD5683_GB_2VREF' - 0V to 2xVREF
+ *
+ * @return None.
+******************************************************************************/
+int32_t ad5686_gain_mode(struct ad5686_dev *dev, uint8_t value)
+{
+ if(chip_info[dev->act_device].register_map == AD5683_REG_MAP)
+ return ad5686_set_shift_reg(dev, AD5683_CMD_WR_CTRL_REG, 0,
+ AD5683_CTRL_GM(value));
+ return -1;
+}