Pratyush Mallick
/
nano_dac
this is testing
noos_mbed/drivers/adc/ad717x/ad717x.h
- Committer:
- pmallick
- Date:
- 2021-01-14
- Revision:
- 0:e8a1ba50c46b
File content as of revision 0:e8a1ba50c46b:
/**************************************************************************//** * @file AD717X.h * @brief AD717X header file. * Devices: AD7172-2, AD7172-4, AD7173-8, AD7175-2, AD7175-8, AD7176-2, * AD7177-2, AD4111, AD4112, AD4114, AD4115 * @author acozma (andrei.cozma@analog.com) * dnechita (dan.nechita@analog.com) ******************************************************************************* * Copyright 2015, 2020(c) Analog Devices, Inc. * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * - Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * - Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * - Neither the name of Analog Devices, Inc. nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * - The use of this software may or may not infringe the patent rights * of one or more patent holders. This license does not release you * from the requirement that you obtain separate licenses from these * patent holders to use this software. * - Use of the software either in source or binary form, must be run * on or directly connected to an Analog Devices Inc. component. * * THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************/ #ifndef __AD717X_H__ #define __AD717X_H__ /******************************************************************************/ /***************************** Include Files **********************************/ /******************************************************************************/ #include <stdint.h> #include "platform_drivers.h" /******************************************************************************/ /*************************** Types Declarations *******************************/ /******************************************************************************/ typedef enum { AD717X_DISABLE, AD717X_USE_CRC, AD717X_USE_XOR, } ad717x_crc_mode; /*! AD717X register info */ typedef struct { int32_t addr; int32_t value; int32_t size; } ad717x_st_reg; /* * The structure describes the device and is used with the ad717x driver. * @slave_select_id: The ID of the Slave Select to be passed to the SPI calls. * @regs: A reference to the register list of the device that the user must * provide when calling the Setup() function. * @num_regs: The length of the register list. * @userCRC: Error check type to use on SPI transfers. */ typedef struct { /* SPI */ spi_desc *spi_desc; /* Device Settings */ ad717x_st_reg *regs; uint8_t num_regs; ad717x_crc_mode useCRC; } ad717x_dev; typedef struct { /* SPI */ spi_init_param spi_init; /* Device Settings */ ad717x_st_reg *regs; uint8_t num_regs; } ad717x_init_param; /*****************************************************************************/ /***************** AD717X Register Definitions *******************************/ /*****************************************************************************/ /* AD717X Register Map */ #define AD717X_COMM_REG 0x00 #define AD717X_STATUS_REG 0x00 #define AD717X_ADCMODE_REG 0x01 #define AD717X_IFMODE_REG 0x02 #define AD717X_REGCHECK_REG 0x03 #define AD717X_DATA_REG 0x04 #define AD717X_GPIOCON_REG 0x06 #define AD717X_ID_REG 0x07 #define AD717X_CHMAP0_REG 0x10 #define AD717X_CHMAP1_REG 0x11 #define AD717X_CHMAP2_REG 0x12 #define AD717X_CHMAP3_REG 0x13 #define AD717X_CHMAP4_REG 0x14 #define AD717X_CHMAP5_REG 0x15 #define AD717X_CHMAP6_REG 0x16 #define AD717X_CHMAP7_REG 0x17 #define AD717X_CHMAP8_REG 0x18 #define AD717X_CHMAP9_REG 0x19 #define AD717X_CHMAP10_REG 0x1A #define AD717X_CHMAP11_REG 0x1B #define AD717X_CHMAP12_REG 0x1C #define AD717X_CHMAP13_REG 0x1D #define AD717X_CHMAP14_REG 0x1E #define AD717X_CHMAP15_REG 0x1F #define AD717X_SETUPCON0_REG 0x20 #define AD717X_SETUPCON1_REG 0x21 #define AD717X_SETUPCON2_REG 0x22 #define AD717X_SETUPCON3_REG 0x23 #define AD717X_SETUPCON4_REG 0x24 #define AD717X_SETUPCON5_REG 0x25 #define AD717X_SETUPCON6_REG 0x26 #define AD717X_SETUPCON7_REG 0x27 #define AD717X_FILTCON0_REG 0x28 #define AD717X_FILTCON1_REG 0x29 #define AD717X_FILTCON2_REG 0x2A #define AD717X_FILTCON3_REG 0x2B #define AD717X_FILTCON4_REG 0x2C #define AD717X_FILTCON5_REG 0x2D #define AD717X_FILTCON6_REG 0x2E #define AD717X_FILTCON7_REG 0x2F #define AD717X_OFFSET0_REG 0x30 #define AD717X_OFFSET1_REG 0x31 #define AD717X_OFFSET2_REG 0x32 #define AD717X_OFFSET3_REG 0x33 #define AD717X_OFFSET4_REG 0x34 #define AD717X_OFFSET5_REG 0x35 #define AD717X_OFFSET6_REG 0x36 #define AD717X_OFFSET7_REG 0x37 #define AD717X_GAIN0_REG 0x38 #define AD717X_GAIN1_REG 0x39 #define AD717X_GAIN2_REG 0x3A #define AD717X_GAIN3_REG 0x3B #define AD717X_GAIN4_REG 0x3C #define AD717X_GAIN5_REG 0x3D #define AD717X_GAIN6_REG 0x3E #define AD717X_GAIN7_REG 0x3F /* Communication Register bits */ #define AD717X_COMM_REG_WEN (0 << 7) #define AD717X_COMM_REG_WR (0 << 6) #define AD717X_COMM_REG_RD (1 << 6) #define AD717X_COMM_REG_RA(x) ((x) & 0x3F) /* Status Register bits */ #define AD717X_STATUS_REG_RDY (1 << 7) #define AD717X_STATUS_REG_ADC_ERR (1 << 6) #define AD717X_STATUS_REG_CRC_ERR (1 << 5) #define AD717X_STATUS_REG_REG_ERR (1 << 4) #define AD717X_STATUS_REG_CH(x) ((x) & 0x0F) /* ADC Mode Register bits */ #define AD717X_ADCMODE_REG_REF_EN (1 << 15) #define AD717X_ADCMODE_SING_CYC (1 << 13) #define AD717X_ADCMODE_REG_DELAY(x) (((x) & 0x7) << 8) #define AD717X_ADCMODE_REG_MODE(x) (((x) & 0x7) << 4) #define AD717X_ADCMODE_REG_CLKSEL(x) (((x) & 0x3) << 2) /* ADC Mode Register additional bits for AD7172-2, AD7172-4, AD4111 and AD4112 */ #define AD717X_ADCMODE_REG_HIDE_DELAY (1 << 14) /* Interface Mode Register bits */ #define AD717X_IFMODE_REG_ALT_SYNC (1 << 12) #define AD717X_IFMODE_REG_IOSTRENGTH (1 << 11) #define AD717X_IFMODE_REG_HIDE_DELAY (1 << 10) #define AD717X_IFMODE_REG_DOUT_RESET (1 << 8) #define AD717X_IFMODE_REG_CONT_READ (1 << 7) #define AD717X_IFMODE_REG_DATA_STAT (1 << 6) #define AD717X_IFMODE_REG_REG_CHECK (1 << 5) #define AD717X_IFMODE_REG_XOR_EN (0x01 << 2) #define AD717X_IFMODE_REG_CRC_EN (0x02 << 2) #define AD717X_IFMODE_REG_XOR_STAT(x) (((x) & AD717X_IFMODE_REG_XOR_EN) == AD717X_IFMODE_REG_XOR_EN) #define AD717X_IFMODE_REG_CRC_STAT(x) (((x) & AD717X_IFMODE_REG_CRC_EN) == AD717X_IFMODE_REG_CRC_EN) #define AD717X_IFMODE_REG_DATA_WL16 (1 << 0) /* GPIO Configuration Register bits */ #define AD717X_GPIOCON_REG_MUX_IO (1 << 12) #define AD717X_GPIOCON_REG_SYNC_EN (1 << 11) #define AD717X_GPIOCON_REG_ERR_EN(x) (((x) & 0x3) << 9) #define AD717X_GPIOCON_REG_ERR_DAT (1 << 8) #define AD717X_GPIOCON_REG_IP_EN1 (1 << 5) #define AD717X_GPIOCON_REG_IP_EN0 (1 << 4) #define AD717X_GPIOCON_REG_OP_EN1 (1 << 3) #define AD717X_GPIOCON_REG_OP_EN0 (1 << 2) #define AD717X_GPIOCON_REG_DATA1 (1 << 1) #define AD717X_GPIOCON_REG_DATA0 (1 << 0) /* GPIO Configuration Register additional bits for AD7172-4, AD7173-8 */ #define AD717X_GPIOCON_REG_GP_DATA3 (1 << 7) #define AD717X_GPIOCON_REG_GP_DATA2 (1 << 6) #define AD717X_GPIOCON_REG_GP_DATA1 (1 << 1) #define AD717X_GPIOCON_REG_GP_DATA0 (1 << 0) /* GPIO Configuration Register additional bits for AD7173-8 */ #define AD717X_GPIOCON_REG_PDSW (1 << 14) #define AD717X_GPIOCON_REG_OP_EN2_3 (1 << 13) /* GPIO Configuration Register additional bits for AD4111, AD4112, AD4114, AD4115 */ #define AD4111_GPIOCON_REG_OP_EN0_1 (1 << 13) #define AD4111_GPIOCON_REG_DATA1 (1 << 7) #define AD4111_GPIOCON_REG_DATA0 (1 << 6) /* GPIO Configuration Register additional bits for AD4111 */ #define AD4111_GPIOCON_REG_OW_EN (1 << 12) /* Channel Map Register 0-3 bits */ #define AD717X_CHMAP_REG_CH_EN (1 << 15) #define AD717X_CHMAP_REG_SETUP_SEL(x) (((x) & 0x7) << 12) #define AD717X_CHMAP_REG_AINPOS(x) (((x) & 0x1F) << 5) #define AD717X_CHMAP_REG_AINNEG(x) (((x) & 0x1F) << 0) /* Channel Map Register additional bits for AD4111, AD4112 */ #define AD4111_CHMAP_REG_INPUT(x) (((x) & 0x3FF) << 0) /* Setup Configuration Register 0-3 bits */ #define AD717X_SETUP_CONF_REG_BI_UNIPOLAR (1 << 12) #define AD717X_SETUP_CONF_REG_REF_SEL(x) (((x) & 0x3) << 4) /* Setup Configuration Register additional bits for AD7173-8 */ #define AD717X_SETUP_CONF_REG_REF_BUF(x) (((x) & 0x3) << 10) #define AD717X_SETUP_CONF_REG_AIN_BUF(x) (((x) & 0x3) << 8) #define AD717X_SETUP_CONF_REG_BURNOUT_EN (1 << 7) #define AD717X_SETUP_CONF_REG_BUFCHOPMAX (1 << 6) /* Setup Configuration Register additional bits for AD7172-2, AD7172-4, AD7175-2 */ #define AD717X_SETUP_CONF_REG_REFBUF_P (1 << 11) #define AD717X_SETUP_CONF_REG_REFBUF_N (1 << 10) #define AD717X_SETUP_CONF_REG_AINBUF_P (1 << 9) #define AD717X_SETUP_CONF_REG_AINBUF_N (1 << 8) /* Setup Configuration Register additional bits for AD4111, AD4112 */ #define AD4111_SETUP_CONF_REG_REFPOS_BUF (1 << 11) #define AD4111_SETUP_CONF_REG_REFNEG_BUF (1 << 10) #define AD4111_SETUP_CONF_REG_AIN_BUF(x) (((x) & 0x3) << 8) #define AD4111_SETUP_CONF_REG_BUFCHOPMAX (1 << 6) /* Filter Configuration Register 0-3 bits */ #define AD717X_FILT_CONF_REG_SINC3_MAP (1 << 15) #define AD717X_FILT_CONF_REG_ENHFILTEN (1 << 11) #define AD717X_FILT_CONF_REG_ENHFILT(x) (((x) & 0x7) << 8) #define AD717X_FILT_CONF_REG_ORDER(x) (((x) & 0x3) << 5) #define AD717X_FILT_CONF_REG_ODR(x) (((x) & 0x1F) << 0) /* ID register mask for relevant bits */ #define AD717X_ID_REG_MASK 0xFFF0 /* AD7172-2 ID */ #define AD7172_2_ID_REG_VALUE 0x00D0 /* AD7172-4 ID */ #define AD7172_4_ID_REG_VALUE 0x2050 /* AD7173-8 ID */ #define AD7173_8_ID_REG_VALUE 0x30D0 /* AD7175-2 ID */ #define AD7175_2_ID_REG_VALUE 0x0CD0 /* AD7175-8 ID */ #define AD7175_8_ID_REG_VALUE 0x3CD0 /* AD7176-2 ID */ #define AD7176_2_ID_REG_VALUE 0x0C90 /* AD7177-2 ID */ #define AD7177_2_ID_REG_VALUE 0x4FD0 /* AD411x ID */ #define AD411X_ID_REG_VALUE 0x30D0 /*****************************************************************************/ /******************* AD717X Constants ****************************************/ /*****************************************************************************/ #define AD717X_CRC8_POLYNOMIAL_REPRESENTATION 0x07 /* x8 + x2 + x + 1 */ /*****************************************************************************/ /************************ Functions Declarations *****************************/ /*****************************************************************************/ /*! Retrieves a pointer to the register that matches the given address */ ad717x_st_reg *AD717X_GetReg(ad717x_dev *device, uint8_t reg_address); /*! Reads the value of the specified register. */ int32_t AD717X_ReadRegister(ad717x_dev *device, uint8_t addr); /*! Writes the value of the specified register. */ int32_t AD717X_WriteRegister(ad717x_dev *device, uint8_t); /*! Resets the device. */ int32_t AD717X_Reset(ad717x_dev *device); /*! Waits until a new conversion result is available. */ int32_t AD717X_WaitForReady(ad717x_dev *device, uint32_t timeout); /*! Reads the conversion result from the device. */ int32_t AD717X_ReadData(ad717x_dev *device, int32_t* pData); /*! Computes data register read size to account for bit number and status * read. */ int32_t AD717X_ComputeDataregSize(ad717x_dev *device); /*! Computes the CRC checksum for a data buffer. */ uint8_t AD717X_ComputeCRC8(uint8_t* pBuf, uint8_t bufSize); /*! Computes the XOR checksum for a data buffer. */ uint8_t AD717X_ComputeXOR8(uint8_t * pBuf, uint8_t bufSize); /*! Updates the CRC settings. */ int32_t AD717X_UpdateCRCSetting(ad717x_dev *device); /*! Initializes the AD717X. */ int32_t AD717X_Init(ad717x_dev **device, ad717x_init_param init_param); /*! Free the resources allocated by AD717X_Init(). */ int32_t AD717X_remove(ad717x_dev *dev); #endif /* __AD717X_H__ */