Example of using the mDot UDK with the X-NUCLEO-IKS01A1 shield
Dependencies: mDot_X_NUCLEO_IKS01A1 libmDot-dev-mbed5-deprecated
Hardware
Hardware List
- Multiconnect mDot with programming header (MTDOT-xxx-X1P)
- Multiconnect mDot Developer kit (MTUDK2-ST-MDOT) or SocketModem and Dragonfly Developer kit (MTUDK2-ST-CELL)
- Motion MEMS and environmental sensor expansion board for STM32 Nucleo X-NUCLEO-IKS01A1
Setup
- Install the mDot on the developer board.
- Install the IKS01A1 on the developer board.
- If using a MTUDK-ST-CELL (white board) plug in the AC power adapter
- Connect the microusb power to your development PC
- if using a MTUDK-ST-CELL there are 2 microusb ports. Use the one closest to the serial port.
Your developer board should look like the following:
Software
This example program uses LoRa utility functions from Dot-Examples and the IKS01A1 library from ST Micro.
LoRa Configuration
Senet
By default this program is configured to connect to the Senet network. To connect to Senet you will need to register your mDot's Node ID with the Senet developer portal and change the network_key array in main.cpp.
Others
To connect to a different LoRa gateway change the arrays network_id and network_key. If you are using passphrases, edit the strings network_name and network_key, uncomment the function "update_ota_config_name_phrase" and comment out the function "update_ota_config_id_key".
main.cpp@9:e642e8f9ea37, 2017-01-17 (annotated)
- Committer:
- pferland
- Date:
- Tue Jan 17 22:53:01 2017 +0000
- Revision:
- 9:e642e8f9ea37
- Parent:
- 8:bfbc3dd47166
- Child:
- 10:1e3e3ab9c29c
Updated all sensors to use the Cayenne low power payload
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
pferland | 0:9e88a9018fc0 | 1 | #include "mbed.h" |
pferland | 0:9e88a9018fc0 | 2 | #include "mDot.h" |
pferland | 0:9e88a9018fc0 | 3 | #include "x_nucleo_iks01a1.h" |
pferland | 0:9e88a9018fc0 | 4 | #include "dot_util.h" |
pferland | 0:9e88a9018fc0 | 5 | #include "RadioEvent.h" |
pferland | 9:e642e8f9ea37 | 6 | #include <cmath> |
pferland | 0:9e88a9018fc0 | 7 | |
pferland | 4:142c85980a6f | 8 | // mDot UDK board demo with X-NUCLEO-IKS01A1 sensor card |
pferland | 4:142c85980a6f | 9 | // For more examples see the Dot-Examples project: |
pferland | 4:142c85980a6f | 10 | // https://developer.mbed.org/teams/MultiTech/code/Dot-Examples/ |
pferland | 4:142c85980a6f | 11 | |
pferland | 4:142c85980a6f | 12 | // This triggers an I2C issue in mbed-os 5.1.5 |
pferland | 4:142c85980a6f | 13 | // Use any other revision to compile. (Tested with libmDot-dev/mbed-os 5.2.2 |
pferland | 9:e642e8f9ea37 | 14 | #define SENET |
pferland | 9:e642e8f9ea37 | 15 | #ifdef SENET |
pferland | 4:142c85980a6f | 16 | // Network Id for Senet public network |
pferland | 4:142c85980a6f | 17 | static uint8_t network_id[] = {0x00,0x25,0x0C,0x00,0x00,0x01,0x00,0x01}; |
pferland | 4:142c85980a6f | 18 | // Register at or Sign in to http://portal.senetco.com/ and register your NodeId to receive your AppId |
pferland | 9:e642e8f9ea37 | 19 | // {0xD3,0x5A,0x30,0x60,0xA6,0x0D,0x9E,0xEA,0xD9,0xA1,0x19,0x61,0x4F,0x29,0x9E,0x5B} |
pferland | 9:e642e8f9ea37 | 20 | static uint8_t network_key[] = {0xD3,0x5A,0x30,0x60,0xA6,0x0D,0x9E,0xEA,0xD9,0xA1,0x19,0x61,0x4F,0x29,0x9E,0x5B}; |
pferland | 4:142c85980a6f | 21 | // 1 For Senet, configurable on your Conduit |
pferland | 0:9e88a9018fc0 | 22 | static uint8_t frequency_sub_band = 1; |
pferland | 4:142c85980a6f | 23 | // True for Senet, false for your Conduit. |
pferland | 4:142c85980a6f | 24 | static bool public_network = true; |
pferland | 9:e642e8f9ea37 | 25 | #else |
pferland | 9:e642e8f9ea37 | 26 | //Replace with settings on your Conduit |
pferland | 9:e642e8f9ea37 | 27 | static std::string network_name = "TestTest"; |
pferland | 9:e642e8f9ea37 | 28 | static std::string network_passphrase = "TestTest"; |
pferland | 9:e642e8f9ea37 | 29 | // 1 For Senet, configurable on your Conduit |
pferland | 9:e642e8f9ea37 | 30 | static uint8_t frequency_sub_band = 1; |
pferland | 9:e642e8f9ea37 | 31 | // True for Senet, false for your Conduit. |
pferland | 9:e642e8f9ea37 | 32 | static bool public_network = false; |
pferland | 9:e642e8f9ea37 | 33 | #endif |
pferland | 9:e642e8f9ea37 | 34 | static uint8_t ack = 1; |
pferland | 9:e642e8f9ea37 | 35 | static uint8_t tx_datarate = mDot::DR4; |
pferland | 0:9e88a9018fc0 | 36 | |
pferland | 4:142c85980a6f | 37 | // deepsleep consumes slightly less current than sleep |
pferland | 4:142c85980a6f | 38 | // in sleep mode, IO state is maintained, RAM is retained, and application will resume after waking up |
pferland | 4:142c85980a6f | 39 | // in deepsleep mode, IOs float, RAM is lost, and application will start from beginning after waking up |
pferland | 4:142c85980a6f | 40 | // if deep_sleep == true, device will enter deepsleep mode |
pferland | 4:142c85980a6f | 41 | static bool deep_sleep = false; |
pferland | 4:142c85980a6f | 42 | |
pferland | 0:9e88a9018fc0 | 43 | mDot *dot = NULL; |
pferland | 0:9e88a9018fc0 | 44 | |
pferland | 0:9e88a9018fc0 | 45 | int main() |
pferland | 0:9e88a9018fc0 | 46 | { |
pferland | 4:142c85980a6f | 47 | Serial pc(USBTX, USBRX); |
pferland | 4:142c85980a6f | 48 | |
pferland | 4:142c85980a6f | 49 | /* Instantiate the expansion board */ |
pferland | 4:142c85980a6f | 50 | X_NUCLEO_IKS01A1 *mems_expansion_board = X_NUCLEO_IKS01A1::Instance(I2C_SDA, I2C_SCL, PC_1); |
pferland | 4:142c85980a6f | 51 | |
pferland | 4:142c85980a6f | 52 | /* Retrieve the composing elements of the expansion board */ |
pferland | 4:142c85980a6f | 53 | GyroSensor *gyroscope = mems_expansion_board->GetGyroscope(); |
pferland | 4:142c85980a6f | 54 | MotionSensor *accelerometer = mems_expansion_board->GetAccelerometer(); |
pferland | 4:142c85980a6f | 55 | MagneticSensor *magnetometer = mems_expansion_board->magnetometer; |
pferland | 4:142c85980a6f | 56 | HumiditySensor *humidity_sensor = mems_expansion_board->ht_sensor; |
pferland | 4:142c85980a6f | 57 | PressureSensor *pressure_sensor = mems_expansion_board->pt_sensor; |
pferland | 4:142c85980a6f | 58 | TempSensor *temp_sensor1 = mems_expansion_board->ht_sensor; |
pferland | 4:142c85980a6f | 59 | TempSensor *temp_sensor2 = mems_expansion_board->pt_sensor; |
pferland | 0:9e88a9018fc0 | 60 | // Custom event handler for automatically displaying RX data |
pferland | 0:9e88a9018fc0 | 61 | RadioEvent events; |
pferland | 0:9e88a9018fc0 | 62 | pc.baud(115200); |
pferland | 0:9e88a9018fc0 | 63 | |
pferland | 0:9e88a9018fc0 | 64 | /* Initialize mDot */ |
pferland | 0:9e88a9018fc0 | 65 | dot = mDot::getInstance(); |
pferland | 8:bfbc3dd47166 | 66 | |
pferland | 8:bfbc3dd47166 | 67 | //dot->setAdr(true); |
pferland | 4:142c85980a6f | 68 | mts::MTSLog::setLogLevel(mts::MTSLog::INFO_LEVEL); |
pferland | 0:9e88a9018fc0 | 69 | dot->setEvents(&events); |
pferland | 0:9e88a9018fc0 | 70 | |
pferland | 0:9e88a9018fc0 | 71 | |
pferland | 0:9e88a9018fc0 | 72 | if (!dot->getStandbyFlag()) { |
pferland | 0:9e88a9018fc0 | 73 | logInfo("mbed-os library version: %d", MBED_LIBRARY_VERSION); |
pferland | 0:9e88a9018fc0 | 74 | // start from a well-known state |
pferland | 0:9e88a9018fc0 | 75 | logInfo("defaulting Dot configuration"); |
pferland | 0:9e88a9018fc0 | 76 | dot->resetConfig(); |
pferland | 0:9e88a9018fc0 | 77 | dot->resetNetworkSession(); |
pferland | 0:9e88a9018fc0 | 78 | |
pferland | 0:9e88a9018fc0 | 79 | // update configuration if necessary |
pferland | 0:9e88a9018fc0 | 80 | // in AUTO_OTA mode the session is automatically saved, so saveNetworkSession and restoreNetworkSession are not needed |
pferland | 0:9e88a9018fc0 | 81 | if (dot->getJoinMode() != mDot::AUTO_OTA) { |
pferland | 0:9e88a9018fc0 | 82 | logInfo("changing network join mode to AUTO_OTA"); |
pferland | 0:9e88a9018fc0 | 83 | if (dot->setJoinMode(mDot::AUTO_OTA) != mDot::MDOT_OK) { |
pferland | 0:9e88a9018fc0 | 84 | logError("failed to set network join mode to AUTO_OTA"); |
pferland | 0:9e88a9018fc0 | 85 | } |
pferland | 0:9e88a9018fc0 | 86 | } |
pferland | 8:bfbc3dd47166 | 87 | |
pferland | 8:bfbc3dd47166 | 88 | uint32_t current_tx_datarate = dot->getTxDataRate(); |
pferland | 8:bfbc3dd47166 | 89 | if (current_tx_datarate != tx_datarate) { |
pferland | 8:bfbc3dd47166 | 90 | logInfo("changing TX datarate from %u to %u", current_tx_datarate, tx_datarate); |
pferland | 8:bfbc3dd47166 | 91 | if (dot->setTxDataRate(tx_datarate) != mDot::MDOT_OK) { |
pferland | 8:bfbc3dd47166 | 92 | logError("failed to set TX datarate to %u", tx_datarate); |
pferland | 8:bfbc3dd47166 | 93 | } |
pferland | 8:bfbc3dd47166 | 94 | } |
pferland | 0:9e88a9018fc0 | 95 | // in OTA and AUTO_OTA join modes, the credentials can be passed to the library as a name and passphrase or an ID and KEY |
pferland | 0:9e88a9018fc0 | 96 | // only one method or the other should be used! |
pferland | 0:9e88a9018fc0 | 97 | // network ID = crc64(network name) |
pferland | 9:e642e8f9ea37 | 98 | #ifdef SENET |
pferland | 0:9e88a9018fc0 | 99 | // network KEY = cmac(network passphrase) |
pferland | 4:142c85980a6f | 100 | update_ota_config_id_key(network_id, network_key, frequency_sub_band, public_network, ack); |
pferland | 9:e642e8f9ea37 | 101 | #else |
pferland | 9:e642e8f9ea37 | 102 | update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, public_network, ack); |
pferland | 9:e642e8f9ea37 | 103 | #endif |
pferland | 0:9e88a9018fc0 | 104 | |
pferland | 0:9e88a9018fc0 | 105 | // configure network link checks |
pferland | 0:9e88a9018fc0 | 106 | // network link checks are a good alternative to requiring the gateway to ACK every packet and should allow a single gateway to handle more Dots |
pferland | 0:9e88a9018fc0 | 107 | // check the link every count packets |
pferland | 0:9e88a9018fc0 | 108 | // declare the Dot disconnected after threshold failed link checks |
pferland | 0:9e88a9018fc0 | 109 | // for count = 3 and threshold = 5, the Dot will be considered disconnected after 15 missed packets in a row |
pferland | 0:9e88a9018fc0 | 110 | update_network_link_check_config(3, 5); |
pferland | 0:9e88a9018fc0 | 111 | |
pferland | 0:9e88a9018fc0 | 112 | // save changes to configuration |
pferland | 0:9e88a9018fc0 | 113 | logInfo("saving configuration"); |
pferland | 0:9e88a9018fc0 | 114 | if (!dot->saveConfig()) { |
pferland | 0:9e88a9018fc0 | 115 | logError("failed to save configuration"); |
pferland | 0:9e88a9018fc0 | 116 | } |
pferland | 0:9e88a9018fc0 | 117 | |
pferland | 0:9e88a9018fc0 | 118 | // display configuration |
pferland | 0:9e88a9018fc0 | 119 | display_config(); |
pferland | 0:9e88a9018fc0 | 120 | } else { |
pferland | 0:9e88a9018fc0 | 121 | // restore the saved session if the dot woke from deepsleep mode |
pferland | 0:9e88a9018fc0 | 122 | // useful to use with deepsleep because session info is otherwise lost when the dot enters deepsleep |
pferland | 0:9e88a9018fc0 | 123 | logInfo("restoring network session from NVM"); |
pferland | 0:9e88a9018fc0 | 124 | dot->restoreNetworkSession(); |
pferland | 0:9e88a9018fc0 | 125 | } |
pferland | 3:d34798ffcaf8 | 126 | |
pferland | 3:d34798ffcaf8 | 127 | |
pferland | 0:9e88a9018fc0 | 128 | |
pferland | 0:9e88a9018fc0 | 129 | while (true) { |
pferland | 0:9e88a9018fc0 | 130 | std::vector<uint8_t> tx_data; |
pferland | 0:9e88a9018fc0 | 131 | |
pferland | 0:9e88a9018fc0 | 132 | // join network if not joined |
pferland | 0:9e88a9018fc0 | 133 | if (!dot->getNetworkJoinStatus()) { |
pferland | 0:9e88a9018fc0 | 134 | join_network(); |
pferland | 0:9e88a9018fc0 | 135 | } |
pferland | 7:d2052933ebcb | 136 | |
pferland | 9:e642e8f9ea37 | 137 | // Payload structure for mydevices cayenne: |
pferland | 9:e642e8f9ea37 | 138 | // 1 byte Data1 ID |
pferland | 9:e642e8f9ea37 | 139 | // 1 Byte Data1 Type |
pferland | 9:e642e8f9ea37 | 140 | // N Bytes Data1 |
pferland | 9:e642e8f9ea37 | 141 | // 1 byte data 2 ID |
pferland | 9:e642e8f9ea37 | 142 | // 1 byte data 2 type |
pferland | 9:e642e8f9ea37 | 143 | // n Bytes data 2 |
pferland | 9:e642e8f9ea37 | 144 | // ... |
pferland | 9:e642e8f9ea37 | 145 | |
pferland | 9:e642e8f9ea37 | 146 | // formats: |
pferland | 9:e642e8f9ea37 | 147 | // Temperature sensor: |
pferland | 9:e642e8f9ea37 | 148 | /* |
pferland | 9:e642e8f9ea37 | 149 | * IPSO: 3303 |
pferland | 9:e642e8f9ea37 | 150 | * LPP 103 |
pferland | 9:e642e8f9ea37 | 151 | * HEX: 67 |
pferland | 9:e642e8f9ea37 | 152 | * Data size: 2 |
pferland | 9:e642e8f9ea37 | 153 | * Resolution: 0.1 degres C |
pferland | 9:e642e8f9ea37 | 154 | |
pferland | 9:e642e8f9ea37 | 155 | * Humidity sensor |
pferland | 9:e642e8f9ea37 | 156 | * IPSO: 3304 |
pferland | 9:e642e8f9ea37 | 157 | * LPP: 104 |
pferland | 9:e642e8f9ea37 | 158 | * Hex: 68 |
pferland | 9:e642e8f9ea37 | 159 | * Datasize: 1 |
pferland | 9:e642e8f9ea37 | 160 | * Resolution: 0.5% unsigned |
pferland | 9:e642e8f9ea37 | 161 | |
pferland | 9:e642e8f9ea37 | 162 | * Barometer/pressure sensor |
pferland | 9:e642e8f9ea37 | 163 | * IPSO: 3315 |
pferland | 9:e642e8f9ea37 | 164 | * LPP: 115 |
pferland | 9:e642e8f9ea37 | 165 | * Hex: 73 |
pferland | 9:e642e8f9ea37 | 166 | * Datasize: 2 |
pferland | 9:e642e8f9ea37 | 167 | * Resolution 0.1hPa unsigned MSB |
pferland | 9:e642e8f9ea37 | 168 | |
pferland | 9:e642e8f9ea37 | 169 | * Accelerometer |
pferland | 9:e642e8f9ea37 | 170 | * IPSO: 3313 |
pferland | 9:e642e8f9ea37 | 171 | * LPP: 113 |
pferland | 9:e642e8f9ea37 | 172 | * Hex: 71 |
pferland | 9:e642e8f9ea37 | 173 | * Data size: 6 |
pferland | 9:e642e8f9ea37 | 174 | * Resolution: 0.001G signed MSB per axis |
pferland | 9:e642e8f9ea37 | 175 | |
pferland | 9:e642e8f9ea37 | 176 | * Gyrometer |
pferland | 9:e642e8f9ea37 | 177 | * IPSO: 3334 |
pferland | 9:e642e8f9ea37 | 178 | * LPP: 134 |
pferland | 9:e642e8f9ea37 | 179 | * Hex: 86 |
pferland | 9:e642e8f9ea37 | 180 | * Data size: 6 |
pferland | 9:e642e8f9ea37 | 181 | * Resolution: 0.01 degrees/s signed msb per axis |
pferland | 9:e642e8f9ea37 | 182 | */ |
pferland | 9:e642e8f9ea37 | 183 | |
pferland | 0:9e88a9018fc0 | 184 | //temp floats |
pferland | 0:9e88a9018fc0 | 185 | float value1, value2; |
pferland | 4:142c85980a6f | 186 | |
pferland | 0:9e88a9018fc0 | 187 | // HTS221 Humidity sensor |
pferland | 0:9e88a9018fc0 | 188 | temp_sensor1->GetTemperature(&value1); |
pferland | 0:9e88a9018fc0 | 189 | humidity_sensor->GetHumidity(&value2); |
pferland | 4:142c85980a6f | 190 | |
pferland | 0:9e88a9018fc0 | 191 | //serialize data and append to packet |
pferland | 9:e642e8f9ea37 | 192 | // Cayenne data: temperature; tag is 0x67, 2 bytes signed, 0.1 C/bit |
pferland | 9:e642e8f9ea37 | 193 | tx_data.push_back(uint8_t(1)); // data id |
pferland | 9:e642e8f9ea37 | 194 | tx_data.push_back(uint8_t(0x67)); // data type - temp |
pferland | 9:e642e8f9ea37 | 195 | int16_t temp = floor(value1*10 + 0.5f); |
pferland | 9:e642e8f9ea37 | 196 | logInfo("Temp payload: %d", temp); |
pferland | 9:e642e8f9ea37 | 197 | tx_data.push_back(uint8_t( 0xFF & (temp >> 8))); |
pferland | 9:e642e8f9ea37 | 198 | tx_data.push_back(uint8_t(0xFF & temp)); |
pferland | 9:e642e8f9ea37 | 199 | |
pferland | 9:e642e8f9ea37 | 200 | |
pferland | 9:e642e8f9ea37 | 201 | tx_data.push_back(uint8_t(2)); // data id |
pferland | 9:e642e8f9ea37 | 202 | tx_data.push_back(uint8_t(0x68)); // data type - humidity |
pferland | 9:e642e8f9ea37 | 203 | temp = floor(value2 * 2.0f + 0.5f); |
pferland | 9:e642e8f9ea37 | 204 | tx_data.push_back(uint8_t(0xFF & temp )); |
pferland | 9:e642e8f9ea37 | 205 | |
pferland | 4:142c85980a6f | 206 | logInfo("Temperature data %f", value1); |
pferland | 9:e642e8f9ea37 | 207 | logInfo("Humidity data: %f", value2); |
pferland | 4:142c85980a6f | 208 | |
pferland | 9:e642e8f9ea37 | 209 | pressure_sensor->GetPressure(&value1); |
pferland | 9:e642e8f9ea37 | 210 | logInfo("PRessure data: %f", value1); |
pferland | 9:e642e8f9ea37 | 211 | // pressure is reported in mbar, cayenne wants it in 0.1 hPa |
pferland | 9:e642e8f9ea37 | 212 | // 1mbar = 1 hPa |
pferland | 9:e642e8f9ea37 | 213 | temp = floor(value1 * 100.0f + 0.5f); |
pferland | 9:e642e8f9ea37 | 214 | tx_data.push_back(uint8_t(3)); // data id |
pferland | 9:e642e8f9ea37 | 215 | tx_data.push_back(uint8_t(0x73)); // data type - pressure |
pferland | 9:e642e8f9ea37 | 216 | temp = floor(value1 / 0.1f + 0.5f); |
pferland | 9:e642e8f9ea37 | 217 | tx_data.push_back(uint8_t(0xFF & (temp >> 8))); |
pferland | 9:e642e8f9ea37 | 218 | tx_data.push_back(uint8_t(0xFF & temp)); |
pferland | 9:e642e8f9ea37 | 219 | |
pferland | 9:e642e8f9ea37 | 220 | |
pferland | 9:e642e8f9ea37 | 221 | // Get accelerometer data |
pferland | 4:142c85980a6f | 222 | int32_t accel_vector[3]; |
pferland | 9:e642e8f9ea37 | 223 | // returns in mG |
pferland | 4:142c85980a6f | 224 | accelerometer->Get_X_Axes(accel_vector); |
pferland | 4:142c85980a6f | 225 | logInfo("Acclerometer Z axis: %d", accel_vector[2]); |
pferland | 4:142c85980a6f | 226 | |
pferland | 9:e642e8f9ea37 | 227 | tx_data.push_back(uint8_t(4)); // data id |
pferland | 9:e642e8f9ea37 | 228 | tx_data.push_back(uint8_t(0x71)); // data type - accelerometer |
pferland | 9:e642e8f9ea37 | 229 | for(int i=0; i<3; i++){ |
pferland | 9:e642e8f9ea37 | 230 | tx_data.push_back(uint8_t(0xFF & accel_vector[i]) >> 8); |
pferland | 9:e642e8f9ea37 | 231 | tx_data.push_back(uint8_t(0xFF & accel_vector[i])); |
pferland | 9:e642e8f9ea37 | 232 | } |
pferland | 9:e642e8f9ea37 | 233 | |
pferland | 9:e642e8f9ea37 | 234 | // Get gyro data |
pferland | 9:e642e8f9ea37 | 235 | gyroscope->Get_G_Axes(accel_vector); |
pferland | 9:e642e8f9ea37 | 236 | // gyro reports in milidegrees/sec, cayenne wants centidegrees/sec |
pferland | 9:e642e8f9ea37 | 237 | tx_data.push_back(uint8_t(5)); //data id |
pferland | 9:e642e8f9ea37 | 238 | tx_data.push_back(uint8_t(0x86)); // data type - gyrometer |
pferland | 9:e642e8f9ea37 | 239 | for(int i=0; i<3; i++){ |
pferland | 9:e642e8f9ea37 | 240 | accel_vector[i] /= 10; |
pferland | 9:e642e8f9ea37 | 241 | tx_data.push_back(uint8_t(0xFF & (accel_vector[i] >> 8))); |
pferland | 9:e642e8f9ea37 | 242 | tx_data.push_back(uint8_t(0xFF & accel_vector[i])); |
pferland | 9:e642e8f9ea37 | 243 | } |
pferland | 9:e642e8f9ea37 | 244 | |
pferland | 9:e642e8f9ea37 | 245 | |
pferland | 0:9e88a9018fc0 | 246 | send_data(tx_data); |
pferland | 0:9e88a9018fc0 | 247 | |
pferland | 0:9e88a9018fc0 | 248 | // if going into deepsleep mode, save the session so we don't need to join again after waking up |
pferland | 0:9e88a9018fc0 | 249 | // not necessary if going into sleep mode since RAM is retained |
pferland | 0:9e88a9018fc0 | 250 | logInfo("saving network session to NVM"); |
pferland | 0:9e88a9018fc0 | 251 | dot->saveNetworkSession(); |
pferland | 0:9e88a9018fc0 | 252 | |
pferland | 0:9e88a9018fc0 | 253 | |
pferland | 0:9e88a9018fc0 | 254 | // ONLY ONE of the three functions below should be uncommented depending on the desired wakeup method |
pferland | 6:9e6ac13de3e9 | 255 | sleep_wake_rtc_only(deep_sleep); |
pferland | 0:9e88a9018fc0 | 256 | //sleep_wake_interrupt_only(deep_sleep); |
pferland | 6:9e6ac13de3e9 | 257 | //sleep_wake_rtc_or_interrupt(deep_sleep); |
pferland | 0:9e88a9018fc0 | 258 | |
pferland | 0:9e88a9018fc0 | 259 | } |
pferland | 0:9e88a9018fc0 | 260 | |
pferland | 0:9e88a9018fc0 | 261 | return 0; |
pferland | 0:9e88a9018fc0 | 262 | } |