File content as of revision 7:b36422ef864f:

/**
 * XBee-mbed library
 * Modified for mbed, 2011 Suga.
 *
 *
 * Copyright (c) 2009 Andrew Rapp. All rights reserved.
 *
 * This file is part of XBee-Arduino.
 *
 * XBee-Arduino is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * XBee-Arduino is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with XBee-Arduino.  If not, see <http://www.gnu.org/licenses/>.
 */

/** @file
 * @brief XBee library for mbed
 */

#include "XBee_conf.h"

#ifndef XBee_h
#define XBee_h

#include "mbed.h"
#include <inttypes.h>

#define SERIES_1
#define SERIES_2
#define WIFI

// set to ATAP value of XBee. AP=2 is recommended
#define ATAP 2

#define START_BYTE 0x7e
#define ESCAPE 0x7d
#define XON 0x11
#define XOFF 0x13

// This value determines the size of the byte array for receiving RX packets
// Most users won't be dealing with packets this large so you can adjust this
// value to reduce memory consumption. But, remember that
// if a RX packet exceeds this size, it cannot be parsed!

// This value is determined by the largest packet size (100 byte payload + 64-bit address + option byte and rssi byte) of a series 1 radio
//#define MAX_FRAME_DATA_SIZE 110
#define MAX_FRAME_DATA_SIZE 1520
#define MAX_RXBUF_SIZE 32

#define BROADCAST_ADDRESS 0xffff
#define ZB_BROADCAST_ADDRESS 0xfffe

// the non-variable length of the frame data (not including frame id or api id or variable data size (e.g. payload, at command set value)
#define ZB_TX_API_LENGTH 12
#define TX_16_API_LENGTH 3
#define TX_64_API_LENGTH 9
#define AT_COMMAND_API_LENGTH 2
#define REMOTE_AT_COMMAND_API_LENGTH 13
// start/length(2)/api/frameid/checksum bytes
#define PACKET_OVERHEAD_LENGTH 6
// api is always the third byte in packet
#define API_ID_INDEX 3

// frame position of rssi byte
#define RX_16_RSSI_OFFSET 2
#define RX_64_RSSI_OFFSET 8

#define DEFAULT_FRAME_ID 1
#define NO_RESPONSE_FRAME_ID 0

// TODO put in tx16 class
#define ACK_OPTION 0
#define DISABLE_ACK_OPTION 1
#define BROADCAST_OPTION 4

// RX options
#define ZB_PACKET_ACKNOWLEDGED 0x01
#define ZB_BROADCAST_PACKET 0x02

// not everything is implemented!
/**
 * Api Id constants
 */
#define TX_64_REQUEST 0x0
#define TX_16_REQUEST 0x1
#define AT_COMMAND_REQUEST 0x08
#define AT_COMMAND_QUEUE_REQUEST 0x09
#define REMOTE_AT_REQUEST 0x17
#define ZB_TX_REQUEST 0x10
#define ZB_EXPLICIT_TX_REQUEST 0x11
#define RX_64_RESPONSE 0x80
#define RX_16_RESPONSE 0x81
#define RX_64_IO_RESPONSE 0x82
#define RX_16_IO_RESPONSE 0x83
#define AT_RESPONSE 0x88
#define TX_STATUS_RESPONSE 0x89
#define MODEM_STATUS_RESPONSE 0x8a
#define ZB_RX_RESPONSE 0x90
#define ZB_EXPLICIT_RX_RESPONSE 0x91
#define ZB_TX_STATUS_RESPONSE 0x8b
#define ZB_IO_SAMPLE_RESPONSE 0x92
#define ZB_IO_NODE_IDENTIFIER_RESPONSE 0x95
#define AT_COMMAND_RESPONSE 0x88
#define REMOTE_AT_COMMAND_RESPONSE 0x97


/**
 * TX STATUS constants
 */
#define    SUCCESS 0x0
#define CCA_FAILURE 0x2
#define INVALID_DESTINATION_ENDPOINT_SUCCESS 0x15
#define    NETWORK_ACK_FAILURE 0x21
#define NOT_JOINED_TO_NETWORK 0x22
#define    SELF_ADDRESSED 0x23
#define ADDRESS_NOT_FOUND 0x24
#define ROUTE_NOT_FOUND 0x25
#define PAYLOAD_TOO_LARGE 0x74

// modem status
#define HARDWARE_RESET 0
#define WATCHDOG_TIMER_RESET 1
#define ASSOCIATED 2
#define DISASSOCIATED 3
#define SYNCHRONIZATION_LOST 4
#define COORDINATOR_REALIGNMENT 5
#define COORDINATOR_STARTED 6

#define ZB_BROADCAST_RADIUS_MAX_HOPS 0

#define ZB_TX_UNICAST 0
#define ZB_TX_BROADCAST 8

#define AT_OK 0
#define AT_ERROR  1
#define AT_INVALID_COMMAND 2
#define AT_INVALID_PARAMETER 3
#define AT_NO_RESPONSE 4

#define NO_ERROR 0
#define CHECKSUM_FAILURE 1
#define PACKET_EXCEEDS_BYTE_ARRAY_LENGTH 2
#define UNEXPECTED_START_BYTE 3

/**
 * The super class of all XBee responses (RX packets)
 * Users should never attempt to create an instance of this class; instead
 * create an instance of a subclass
 * It is recommend to reuse subclasses to conserve memory
 */
class XBeeResponse {
public:
    //static const int MODEM_STATUS = 0x8a;
    /**
     * Default constructor
     */
    XBeeResponse();
    /**
     * Returns Api Id of the response
     */
    uint8_t getApiId();
    void setApiId(uint8_t apiId);
    /**
     * Returns the MSB length of the packet
     */
    uint8_t getMsbLength();
    void setMsbLength(uint8_t msbLength);
    /**
     * Returns the LSB length of the packet
     */
    uint8_t getLsbLength();
    void setLsbLength(uint8_t lsbLength);
    /**
     * Returns the packet checksum
     */
    uint8_t getChecksum();
    void setChecksum(uint8_t checksum);
    /**
     * Returns the length of the frame data: all bytes after the api id, and prior to the checksum
     * Note up to release 0.1.2, this was incorrectly including the checksum in the length.
     */
    uint16_t getFrameDataLength();
    void setFrameData(uint8_t* frameDataPtr);
    /**
     * Returns the buffer that contains the response.
     * Starts with byte that follows API ID and includes all bytes prior to the checksum
     * Length is specified by getFrameDataLength()
     * Note: Unlike Digi's definition of the frame data, this does not start with the API ID..
     * The reason for this is all responses include an API ID, whereas my frame data
     * includes only the API specific data.
     */
    uint8_t* getFrameData();

    void setFrameLength(uint16_t frameLength);
    // to support future 65535 byte packets I guess
    /**
     * Returns the length of the packet
     */
    uint16_t getPacketLength();
    /**
     * Resets the response to default values
     */
    void reset();
    /**
     * Initializes the response
     */
    void init();
#ifdef SERIES_2
    /**
     * Call with instance of ZBTxStatusResponse class only if getApiId() == ZB_TX_STATUS_RESPONSE
     * to populate response
     */
    void getZBTxStatusResponse(XBeeResponse &response);
    /**
     * Call with instance of ZBRxResponse class only if getApiId() == ZB_RX_RESPONSE
     * to populate response
     */
    void getZBRxResponse(XBeeResponse &response);
    /**
     * Call with instance of ZBRxIoSampleResponse class only if getApiId() == ZB_IO_SAMPLE_RESPONSE
     * to populate response
     */
    void getZBRxIoSampleResponse(XBeeResponse &response);
#endif
#ifdef SERIES_1
    /**
     * Call with instance of TxStatusResponse only if getApiId() == TX_STATUS_RESPONSE
     */
    void getTxStatusResponse(XBeeResponse &response);
    /**
     * Call with instance of Rx16Response only if getApiId() == RX_16_RESPONSE
     */
    void getRx16Response(XBeeResponse &response);
    /**
     * Call with instance of Rx64Response only if getApiId() == RX_64_RESPONSE
     */
    void getRx64Response(XBeeResponse &response);
    /**
     * Call with instance of Rx16IoSampleResponse only if getApiId() == RX_16_IO_RESPONSE
     */
    void getRx16IoSampleResponse(XBeeResponse &response);
    /**
     * Call with instance of Rx64IoSampleResponse only if getApiId() == RX_64_IO_RESPONSE
     */
    void getRx64IoSampleResponse(XBeeResponse &response);
#endif
    /**
     * Call with instance of AtCommandResponse only if getApiId() == AT_COMMAND_RESPONSE
     */
    void getAtCommandResponse(XBeeResponse &responses);
    /**
     * Call with instance of RemoteAtCommandResponse only if getApiId() == REMOTE_AT_COMMAND_RESPONSE
     */
    void getRemoteAtCommandResponse(XBeeResponse &response);
    /**
     * Call with instance of ModemStatusResponse only if getApiId() == MODEM_STATUS_RESPONSE
     */
    void getModemStatusResponse(XBeeResponse &response);
    /**
     * Returns true if the response has been successfully parsed and is complete and ready for use
     */
    bool isAvailable();
    void setAvailable(bool complete);
    /**
     * Returns true if the response contains errors
     */
    bool isError();
    /**
     * Returns an error code, or zero, if successful.
     * Error codes include: CHECKSUM_FAILURE, PACKET_EXCEEDS_BYTE_ARRAY_LENGTH, UNEXPECTED_START_BYTE
     */
    uint8_t getErrorCode();
    void setErrorCode(uint8_t errorCode);
protected:
    // pointer to frameData
    uint8_t* _frameDataPtr;
private:
    void setCommon(XBeeResponse &target);
    uint8_t _apiId;
    uint8_t _msbLength;
    uint8_t _lsbLength;
    uint8_t _checksum;
    uint16_t _frameLength;
    bool _complete;
    uint8_t _errorCode;
};

class XBeeAddress {
public:
    XBeeAddress();
};

/**
 * Represents a 64-bit XBee Address
 */
class XBeeAddress64 : public XBeeAddress {
public:
    XBeeAddress64(uint32_t msb, uint32_t lsb);
    XBeeAddress64();
    uint32_t getMsb();
    uint32_t getLsb();
    void setMsb(uint32_t msb);
    void setLsb(uint32_t lsb);
private:
    uint32_t _msb;
    uint32_t _lsb;
};

//class XBeeAddress16 : public XBeeAddress {
//public:
//    XBeeAddress16(uint16_t addr);
//    XBeeAddress16();
//    uint16_t getAddress();
//    void setAddress(uint16_t addr);
//private:
//    uint16_t _addr;
//};

/**
 * This class is extended by all Responses that include a frame id
 */
class FrameIdResponse : public XBeeResponse {
public:
    FrameIdResponse();
    uint8_t getFrameId();
private:
    uint8_t _frameId;
};

/**
 * Common functionality for both Series 1 and 2 data RX data packets
 */
class RxDataResponse : public XBeeResponse {
public:
    RxDataResponse();
    /**
     * Returns the specified index of the payload.  The index may be 0 to getDataLength() - 1
     * This method is deprecated; use uint8_t* getData()
     */
    uint8_t getData(int index);
    /**
     * Returns the payload array.  This may be accessed from index 0 to getDataLength() - 1
     */
    uint8_t* getData();
    /**
     * Returns the length of the payload
     */
    virtual uint16_t getDataLength() = 0;
    /**
     * Returns the position in the frame data where the data begins
     */
    virtual uint8_t getDataOffset() = 0;
};

// getResponse to return the proper subclass:
// we maintain a pointer to each type of response, when a response is parsed, it is allocated only if NULL
// can we allocate an object in a function?

#ifdef SERIES_2
/**
 * Represents a Series 2 TX status packet
 */
class ZBTxStatusResponse : public FrameIdResponse {
    public:
        ZBTxStatusResponse();
        uint16_t getRemoteAddress();
        uint8_t getTxRetryCount();
        uint8_t getDeliveryStatus();
        uint8_t getDiscoveryStatus();
        bool isSuccess();
};

/**
 * Represents a Series 2 RX packet
 */
class ZBRxResponse : public RxDataResponse {
public:
    ZBRxResponse();
    XBeeAddress64& getRemoteAddress64();
    uint16_t getRemoteAddress16();
    uint8_t getOption();
    virtual uint16_t getDataLength();
    // frame position where data starts
    virtual uint8_t getDataOffset();
private:
    XBeeAddress64 _remoteAddress64;
};

/**
 * Represents a Series 2 RX I/O Sample packet
 */
class ZBRxIoSampleResponse : public ZBRxResponse {
public:
    ZBRxIoSampleResponse();
    bool containsAnalog();
    bool containsDigital();
    /**
     * Returns true if the pin is enabled
     */
    bool isAnalogEnabled(uint8_t pin);
    /**
     * Returns true if the pin is enabled
     */
    bool isDigitalEnabled(uint8_t pin);
    /**
     * Returns the 10-bit analog reading of the specified pin.
     * Valid pins include ADC:xxx.
     */
    uint16_t getAnalog(uint8_t pin);
    /**
     * Returns true if the specified pin is high/on.
     * Valid pins include DIO:xxx.
     */
    bool isDigitalOn(uint8_t pin);
    uint8_t getDigitalMaskMsb();
    uint8_t getDigitalMaskLsb();
    uint8_t getAnalogMask();
};

#endif

#ifdef SERIES_1
/**
 * Represents a Series 1 TX Status packet
 */
class TxStatusResponse : public FrameIdResponse {
    public:
        TxStatusResponse();
        uint8_t getStatus();
        bool isSuccess();
};

/**
 * Represents a Series 1 RX packet
 */
class RxResponse : public RxDataResponse {
public:
    RxResponse();
    // remember rssi is negative but this is unsigned byte so it's up to you to convert
    uint8_t getRssi();
    uint8_t getOption();
    bool isAddressBroadcast();
    bool isPanBroadcast();
    virtual uint16_t getDataLength();
    virtual uint8_t getDataOffset();
    virtual uint8_t getRssiOffset() = 0;
};

/**
 * Represents a Series 1 16-bit address RX packet
 */
class Rx16Response : public RxResponse {
public:
    Rx16Response();
    virtual uint8_t getRssiOffset();
    uint16_t getRemoteAddress16();
protected:
    uint16_t _remoteAddress;
};

/**
 * Represents a Series 1 64-bit address RX packet
 */
class Rx64Response : public RxResponse {
public:
    Rx64Response();
    virtual uint8_t getRssiOffset();
    XBeeAddress64& getRemoteAddress64();
private:
    XBeeAddress64 _remoteAddress;
};

/**
 * Represents a Series 1 RX I/O Sample packet
 */
class RxIoSampleBaseResponse : public RxResponse {
    public:
        RxIoSampleBaseResponse();
        /**
         * Returns the number of samples in this packet
         */
        uint8_t getSampleSize();
        bool containsAnalog();
        bool containsDigital();
        /**
         * Returns true if the specified analog pin is enabled
         */
        bool isAnalogEnabled(uint8_t pin);
        /**
         * Returns true if the specified digital pin is enabled
         */
        bool isDigitalEnabled(uint8_t pin);
        /**
         * Returns the 10-bit analog reading of the specified pin.
         * Valid pins include ADC:0-5.  Sample index starts at 0
         */
        uint16_t getAnalog(uint8_t pin, uint8_t sample);
        /**
         * Returns true if the specified pin is high/on.
         * Valid pins include DIO:0-8.  Sample index starts at 0
         */
        bool isDigitalOn(uint8_t pin, uint8_t sample);
        uint8_t getSampleOffset();
    private:
};

class Rx16IoSampleResponse : public RxIoSampleBaseResponse {
public:
    Rx16IoSampleResponse();
    uint16_t getRemoteAddress16();
    virtual uint8_t getRssiOffset();

};

class Rx64IoSampleResponse : public RxIoSampleBaseResponse {
public:
    Rx64IoSampleResponse();
    XBeeAddress64& getRemoteAddress64();
    virtual uint8_t getRssiOffset();
private:
    XBeeAddress64 _remoteAddress;
};

#endif

/**
 * Represents a Modem Status RX packet
 */
class ModemStatusResponse : public XBeeResponse {
public:
    ModemStatusResponse();
    uint8_t getStatus();
};

/**
 * Represents an AT Command RX packet
 */
class AtCommandResponse : public FrameIdResponse {
    public:
        AtCommandResponse();
        /**
         * Returns an array containing the two character command
         */
        uint8_t* getCommand();
        /**
         * Returns the command status code.
         * Zero represents a successful command
         */
        uint8_t getStatus();
        /**
         * Returns an array containing the command value.
         * This is only applicable to query commands.
         */
        uint8_t* getValue();
        /**
         * Returns the length of the command value array.
         */
        uint16_t getValueLength();
        /**
         * Returns true if status equals AT_OK
         */
        bool isOk();
};

/**
 * Represents a Remote AT Command RX packet
 */
class RemoteAtCommandResponse : public AtCommandResponse {
    public:
        RemoteAtCommandResponse();
        /**
         * Returns an array containing the two character command
         */
        uint8_t* getCommand();
        /**
         * Returns the command status code.
         * Zero represents a successful command
         */
        uint8_t getStatus();
        /**
         * Returns an array containing the command value.
         * This is only applicable to query commands.
         */
        uint8_t* getValue();
        /**
         * Returns the length of the command value array.
         */
        uint16_t getValueLength();
        /**
         * Returns the 16-bit address of the remote radio
         */
        uint16_t getRemoteAddress16();
        /**
         * Returns the 64-bit address of the remote radio
         */
        XBeeAddress64& getRemoteAddress64();
        /**
         * Returns true if command was successful
         */
        bool isOk();
    private:
        XBeeAddress64 _remoteAddress64;
};


/**
 * Super class of all XBee requests (TX packets)
 * Users should never create an instance of this class; instead use an subclass of this class
 * It is recommended to reuse Subclasses of the class to conserve memory
 * <p/>
 * This class allocates a buffer to
 */
class XBeeRequest {
public:
    /**
     * Constructor
     * TODO make protected
     */
    XBeeRequest(uint8_t apiId, uint8_t frameId);
    /**
     * Sets the frame id.  Must be between 1 and 255 inclusive to get a TX status response.
     */
    void setFrameId(uint8_t frameId);
    /**
     * Returns the frame id
     */
    uint8_t getFrameId();
    /**
     * Returns the API id
     */
    uint8_t getApiId();
    // setting = 0 makes this a pure virtual function, meaning the subclass must implement, like abstract in java
    /**
     * Starting after the frame id (pos = 0) and up to but not including the checksum
     * Note: Unlike Digi's definition of the frame data, this does not start with the API ID.
     * The reason for this is the API ID and Frame ID are common to all requests, whereas my definition of
     * frame data is only the API specific data.
     */
    virtual uint8_t getFrameData(uint16_t pos) = 0;
    /**
     * Returns the size of the api frame (not including frame id or api id or checksum).
     */
    virtual uint16_t getFrameDataLength() = 0;
    //void reset();
protected:
    void setApiId(uint8_t apiId);
private:
    uint8_t _apiId;
    uint8_t _frameId;
};

// TODO add reset/clear method since responses are often reused
/**
 * Primary interface for communicating with an XBee Radio.
 * This class provides methods for sending and receiving packets with an XBee radio via the serial port.
 * The XBee radio must be configured in API (packet) mode (AP=2)
 * in order to use this software.
 * <p/>
 * Since this code is designed to run on a microcontroller, with only one thread, you are responsible for reading the
 * data off the serial buffer in a timely manner.  This involves a call to a variant of readPacket(...).
 * If your serial port is receiving data faster than you are reading, you can expect to lose packets.
 * Arduino only has a 128 byte serial buffer so it can easily overflow if two or more packets arrive
 * without a call to readPacket(...)
 * <p/>
 * In order to conserve resources, this class only supports storing one response packet in memory at a time.
 * This means that you must fully consume the packet prior to calling readPacket(...), because calling
 * readPacket(...) overwrites the previous response.
 * <p/>
 * This class creates an array of size MAX_FRAME_DATA_SIZE for storing the response packet.  You may want
 * to adjust this value to conserve memory.
 *
 * \author Andrew Rapp
 */
class XBee {
public:
    XBee(PinName p_tx, PinName p_rx);
    XBee(PinName p_tx, PinName p_rx, PinName p_cts, PinName p_rts);
    // for eclipse dev only
//    void setSerial(HardwareSerial serial);
    /**
     * Reads all available serial bytes until a packet is parsed, an error occurs, or the buffer is empty.
     * You may call <i>xbee</i>.getResponse().isAvailable() after calling this method to determine if
     * a packet is ready, or <i>xbee</i>.getResponse().isError() to determine if
     * a error occurred.
     * <p/>
     * This method should always return quickly since it does not wait for serial data to arrive.
     * You will want to use this method if you are doing other timely stuff in your loop, where
     * a delay would cause problems.
     * NOTE: calling this method resets the current response, so make sure you first consume the
     * current response
     */
    void readPacket();
    /**
     * Waits a maximum of <i>timeout</i> milliseconds for a response packet before timing out; returns true if packet is read.
     * Returns false if timeout or error occurs.
     */
    bool readPacket(int timeout);
    /**
     * Reads until a packet is received or an error occurs.
     * Caution: use this carefully since if you don't get a response, your Arduino code will hang on this
     * call forever!! often it's better to use a timeout: readPacket(int)
     */
    void readPacketUntilAvailable();
    /**
     * Starts the serial connection at the supplied baud rate
     */
    void begin(long baud);
    void getResponse(XBeeResponse &response);
    /**
     * Returns a reference to the current response
     * Note: once readPacket is called again this response will be overwritten!
     */
    XBeeResponse& getResponse();
    /**
     * Sends a XBeeRequest (TX packet) out the serial port
     */
    void send(XBeeRequest &request);
    //uint8_t sendAndWaitForResponse(XBeeRequest &request, int timeout);
    /**
     * Returns a sequential frame id between 1 and 255
     */
    uint8_t getNextFrameId();
    
    void isr_recv ();
    int getbuf ();
    int bufreadable ();
private:
    void sendByte(uint8_t b, bool escape);
    void resetResponse();
    XBeeResponse _response;
    bool _escape;
    // current packet position for response.  just a state variable for packet parsing and has no relevance for the response otherwise
    uint16_t _pos, _epos;
    // last byte read
    uint8_t b;
    uint16_t _checksumTotal;
    uint8_t _nextFrameId;
    // buffer for incoming RX packets.  holds only the api specific frame data, starting after the api id byte and prior to checksum
    uint8_t _responseFrameData[MAX_FRAME_DATA_SIZE];
    Serial _xbee;
    char _rxbuf[MAX_RXBUF_SIZE];
    int _rxaddr_w, _rxaddr_r;
    bool _rts;
};

/**
 * All TX packets that support payloads extend this class
 */
class PayloadRequest : public XBeeRequest {
public:
    PayloadRequest(uint8_t apiId, uint8_t frameId, uint8_t *payload, uint16_t payloadLength);
    /**
     * Returns the payload of the packet, if not null
     */
    uint8_t* getPayload();
    /**
     * Sets the payload array
     */
    void setPayload(uint8_t* payloadPtr);
    /**
     * Returns the length of the payload array, as specified by the user.
     */
    uint16_t getPayloadLength();
    /**
     * Sets the length of the payload to include in the request.  For example if the payload array
     * is 50 bytes and you only want the first 10 to be included in the packet, set the length to 10.
     * Length must be <= to the array length.
     */
    void setPayloadLength(uint16_t payloadLength);
private:
    uint8_t* _payloadPtr;
    uint16_t _payloadLength;
};

#ifdef SERIES_1

/**
 * Represents a Series 1 TX packet that corresponds to Api Id: TX_16_REQUEST
 * <p/>
 * Be careful not to send a data array larger than the max packet size of your radio.
 * This class does not perform any validation of packet size and there will be no indication
 * if the packet is too large, other than you will not get a TX Status response.
 * The datasheet says 100 bytes is the maximum, although that could change in future firmware.
 */
class Tx16Request : public PayloadRequest {
public:
    Tx16Request(uint16_t addr16, uint8_t option, uint8_t *payload, uint16_t payloadLength, uint8_t frameId);
    /**
     * Creates a Unicast Tx16Request with the ACK option and DEFAULT_FRAME_ID
     */
    Tx16Request(uint16_t addr16, uint8_t *payload, uint16_t payloadLength);
    /**
     * Creates a default instance of this class.  At a minimum you must specify
     * a payload, payload length and a destination address before sending this request.
     */
    Tx16Request();
    uint16_t getAddress16();
    void setAddress16(uint16_t addr16);
    uint8_t getOption();
    void setOption(uint8_t option);
    virtual uint8_t getFrameData(uint16_t pos);
    virtual uint16_t getFrameDataLength();
protected:
private:
    uint16_t _addr16;
    uint8_t _option;
};

/**
 * Represents a Series 1 TX packet that corresponds to Api Id: TX_64_REQUEST
 *
 * Be careful not to send a data array larger than the max packet size of your radio.
 * This class does not perform any validation of packet size and there will be no indication
 * if the packet is too large, other than you will not get a TX Status response.
 * The datasheet says 100 bytes is the maximum, although that could change in future firmware.
 */
class Tx64Request : public PayloadRequest {
public:
    Tx64Request(XBeeAddress64 &addr64, uint8_t option, uint8_t *payload, uint16_t payloadLength, uint8_t frameId);
    /**
     * Creates a unicast Tx64Request with the ACK option and DEFAULT_FRAME_ID
     */
    Tx64Request(XBeeAddress64 &addr64, uint8_t *payload, uint16_t payloadLength);
    /**
     * Creates a default instance of this class.  At a minimum you must specify
     * a payload, payload length and a destination address before sending this request.
     */
    Tx64Request();
    XBeeAddress64& getAddress64();
    void setAddress64(XBeeAddress64& addr64);
    // TODO move option to superclass
    uint8_t getOption();
    void setOption(uint8_t option);
    virtual uint8_t getFrameData(uint16_t pos);
    virtual uint16_t getFrameDataLength();
private:
    XBeeAddress64 _addr64;
    uint8_t _option;
};

#endif


#ifdef SERIES_2

/**
 * Represents a Series 2 TX packet that corresponds to Api Id: ZB_TX_REQUEST
 *
 * Be careful not to send a data array larger than the max packet size of your radio.
 * This class does not perform any validation of packet size and there will be no indication
 * if the packet is too large, other than you will not get a TX Status response.
 * The datasheet says 72 bytes is the maximum for ZNet firmware and ZB Pro firmware provides
 * the ATNP command to get the max supported payload size.  This command is useful since the
 * maximum payload size varies according to certain settings, such as encryption.
 * ZB Pro firmware provides a PAYLOAD_TOO_LARGE that is returned if payload size
 * exceeds the maximum.
 */
class ZBTxRequest : public PayloadRequest {
public:
    /**
     * Creates a unicast ZBTxRequest with the ACK option and DEFAULT_FRAME_ID
     */
    ZBTxRequest(XBeeAddress64 &addr64, uint8_t *payload, uint16_t payloadLength);
    ZBTxRequest(XBeeAddress64 &addr64, uint16_t addr16, uint8_t broadcastRadius, uint8_t option, uint8_t *payload, uint16_t payloadLength, uint8_t frameId);
    /**
     * Creates a default instance of this class.  At a minimum you must specify
     * a payload, payload length and a destination address before sending this request.
     */
    ZBTxRequest();
    XBeeAddress64& getAddress64();
    uint16_t getAddress16();
    uint8_t getBroadcastRadius();
    uint8_t getOption();
    void setAddress64(XBeeAddress64& addr64);
    void setAddress16(uint16_t addr16);
    void setBroadcastRadius(uint8_t broadcastRadius);
    void setOption(uint8_t option);
protected:
    // declare virtual functions
    virtual uint8_t getFrameData(uint16_t pos);
    virtual uint16_t getFrameDataLength();
private:
    XBeeAddress64 _addr64;
    uint16_t _addr16;
    uint8_t _broadcastRadius;
    uint8_t _option;
};

#endif

/**
 * Represents an AT Command TX packet
 * The command is used to configure the serially connected XBee radio
 */
class AtCommandRequest : public XBeeRequest {
public:
    AtCommandRequest();
    AtCommandRequest(uint8_t *command);
    AtCommandRequest(uint8_t *command, uint8_t *commandValue, uint8_t commandValueLength);
    virtual uint8_t getFrameData(uint16_t pos);
    virtual uint16_t getFrameDataLength();
    uint8_t* getCommand();
    void setCommand(uint8_t* command);
    uint8_t* getCommandValue();
    void setCommandValue(uint8_t* command);
    uint8_t getCommandValueLength();
    void setCommandValueLength(uint8_t length);
    /**
     * Clears the optional commandValue and commandValueLength so that a query may be sent
     */
    void clearCommandValue();
    //void reset();
private:
    uint8_t *_command;
    uint8_t *_commandValue;
    uint8_t _commandValueLength;
};

/**
 * Represents an Remote AT Command TX packet
 * The command is used to configure a remote XBee radio
 */
class RemoteAtCommandRequest : public AtCommandRequest {
public:
    RemoteAtCommandRequest();
    /**
     * Creates a RemoteAtCommandRequest with 16-bit address to set a command.
     * 64-bit address defaults to broadcast and applyChanges is true.
     */
    RemoteAtCommandRequest(uint16_t remoteAddress16, uint8_t *command, uint8_t *commandValue, uint8_t commandValueLength);
    /**
     * Creates a RemoteAtCommandRequest with 16-bit address to query a command.
     * 64-bit address defaults to broadcast and applyChanges is true.
     */
    RemoteAtCommandRequest(uint16_t remoteAddress16, uint8_t *command);
    /**
     * Creates a RemoteAtCommandRequest with 64-bit address to set a command.
     * 16-bit address defaults to broadcast and applyChanges is true.
     */
    RemoteAtCommandRequest(XBeeAddress64 &remoteAddress64, uint8_t *command, uint8_t *commandValue, uint8_t commandValueLength);
    /**
     * Creates a RemoteAtCommandRequest with 16-bit address to query a command.
     * 16-bit address defaults to broadcast and applyChanges is true.
     */
    RemoteAtCommandRequest(XBeeAddress64 &remoteAddress64, uint8_t *command);
    uint16_t getRemoteAddress16();
    void setRemoteAddress16(uint16_t remoteAddress16);
    XBeeAddress64& getRemoteAddress64();
    void setRemoteAddress64(XBeeAddress64 &remoteAddress64);
    bool getApplyChanges();
    void setApplyChanges(bool applyChanges);
    virtual uint8_t getFrameData(uint16_t pos);
    virtual uint16_t getFrameDataLength();
    static XBeeAddress64 broadcastAddress64;
//    static uint16_t broadcast16Address;
private:
    XBeeAddress64 _remoteAddress64;
    uint16_t _remoteAddress16;
    bool _applyChanges;
};



#endif //XBee_h