Diff: main.cpp

Revision:

7:b43867fa8bef

Parent:

6:2357a04a16ff

--- a/main.cpp	Tue Mar 10 04:27:11 2015 +0000
+++ b/main.cpp	Tue Sep 26 03:39:31 2017 +0000
@@ -1,91 +1,56 @@
-/**    IAP demo : demo code for internal Flash memory access library
- *
- *        The internal Flash memory access is described in the LPC1768 and LPC11U24 usermanual.
- *            http://www.nxp.com/documents/user_manual/UM10360.pdf
- *            http://www.nxp.com/documents/user_manual/UM10462.pdf
- *
- *               LPC1768 --
- *                    Chapter  2: "LPC17xx Memory map"
- *                    Chapter 32: "LPC17xx Flash memory interface and programming"
- *                    refering Rev. 01 - 4 January 2010
- *
- *               LPC11U24 --
- *                    Chapter  2: "LPC11Uxx Memory mapping"
- *                    Chapter 20: "LPC11Uxx Flash programming firmware"
- *                    refering Rev. 03 - 16 July 2012
- *
- *  This main.cpp demonstrates how the flash can be erased and wrote.
- *
- *  This program tries to...
- *    0. read device ID and serial#
- *    1. check if the targat sector blank
- *    2. erase the sector if it was not blank
- *    3. write into the flash (prepare before write)
- *    4. verify the data by IAP command
- *    5. show the content of the flash
- *
- *  The Flash must be erased as sectors. No overwrite can be done like SRAM.
- *  So erase should be done in size of 4K or 32K.
- *
- *  Writing sector can be done with size of 256, 512, 1024 or 4096.
- *  If other size is used, the IAP returns an error.
- *  The SRAM memory should be allocated in
- *
- *
- *        Released under the MIT License: http://mbed.org/license/mit
- *
- *        revision 1.0  09-Mar-2010   1st release
- *        revision 1.1  12-Mar-2010   chaged: to make possible to reserve flash area for user
- *                                            it can be set by USER_FLASH_AREA_START and USER_FLASH_AREA_SIZE in IAP.h
- *        revision 2.0  26-Nov.2012   LPC11U24 code added
- *        revision 2.1  26-Nov-2012   EEPROM access code imported from Suga koubou san's (http://mbed.org/users/okini3939/) library
- *                                            http://mbed.org/users/okini3939/code/M0_EEPROM_test/
- *        revision 3.0  09-Jan-2015   LPC812 and LPC824 support added
- *        revision 3.1  13-Jan-2015   LPC1114 support added
- *        revision 3.1.1 16-Jan-2015  Target MCU name changed for better compatibility across the platforms
- *        revision 3.1.2 10-Mar-2015  merged with pull requests. reinvoke_isp() added and modified read_serial() to return a pointer.
- */
-
 #include    "mbed.h"
 #include    "IAP.h"
 
 #define     MEM_SIZE        256
 
-#if defined(TARGET_LPC176X)
-#define     TARGET_SECTOR    29     //  use sector 29 as target sector if it is on LPC1768
-#elif defined(TARGET_LPC11UXX) || defined(TARGET_LPC11XX)
-#define     TARGET_SECTOR    7      //  use sector  7 as target sector if it is on LPC11U24
-#define     TARGET_EEPROM_ADDRESS   64
-#define     TARGET_EEPROM_ADDRESS   64
-#elif defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
-#define     TARGET_SECTOR    15      //  use sector  15 as target sector if it is on LPC812
-#endif
+#define     TARGET_SECTOR    7      //  use sector 7 as target sector if it is on LPC1768
 
 void    memdump( char *p, int n );
 int     isprint( int c );
 
 IAP     iap;
 
+void write_dummy_data( void );
 
-int main()
+
+main()
+{
+    int     r;
+    
+    //  Write dummy data into Flash sector7
+    write_dummy_data();
+
+    printf( "\r\n==== dummy data written ====\r\n" );
+
+
+    printf( "\r\nShowing flash contents of sector %d\r\n", TARGET_SECTOR );
+    memdump( sector_start_adress[ TARGET_SECTOR ], MEM_SIZE );
+
+
+    //  Try blank check
+    r   = iap.blank_check( TARGET_SECTOR, TARGET_SECTOR );
+    printf( "Try blank check ==> blank check result = 0x%08X\r\n", r );
+    
+    //  Try erase
+    iap.prepare( TARGET_SECTOR, TARGET_SECTOR );
+    r   = iap.erase( TARGET_SECTOR, TARGET_SECTOR );
+    printf( "Try erase       ==> erase result       = 0x%08X\r\n", r );
+    
+    printf( "\r\nShowing flash contents of sector %d\r\n", TARGET_SECTOR );
+    memdump( sector_start_adress[ TARGET_SECTOR ], MEM_SIZE );
+
+}
+
+void write_dummy_data( void )
 {
     char    mem[ MEM_SIZE ];    //  memory, it should be aligned to word boundary
-    int     *serial_number;
     int     r;
 
     printf( "\r\n\r\n=== IAP: Flash memory writing test ===\r\n" );
     printf( "  device-ID = 0x%08X\r\n", iap.read_ID() );
 
-    serial_number = iap.read_serial();
-
-    printf( "  serial# =" );
-    for ( int i = 0; i < 4; i++ )
-        printf( " %08X", *(serial_number + i) );
-    printf( "\r\n" );
-
     printf( "  CPU running %dkHz\r\n", SystemCoreClock / 1000 );
     printf( "  user reserved flash area: start_address=0x%08X, size=%d bytes\r\n", iap.reserved_flash_area_start(), iap.reserved_flash_area_size() );
-    printf( "  read_BootVer=0x%08X\r\r\n", iap.read_BootVer() );
 
     for ( int i = 0; i < MEM_SIZE; i++ )
         mem[ i ]    = i & 0xFF;
@@ -113,57 +78,6 @@
 
     r   = iap.compare( mem, sector_start_adress[ TARGET_SECTOR ], MEM_SIZE );
     printf( "compare result     = \"%s\"\r\n", r ? "FAILED" : "OK" );
-
-//#define WRITE_NEXT_BLOCK
-#ifdef WRITE_NEXT_BLOCK
-
-    // copy RAM to Flash
-
-    iap.prepare( TARGET_SECTOR, TARGET_SECTOR );
-    r   = iap.write( mem, sector_start_adress[ TARGET_SECTOR ] + 256, MEM_SIZE );
-    printf( "copied: SRAM(0x%08X)->Flash(0x%08X) for %d bytes. (result=0x%08X)\r\n", mem, sector_start_adress[ TARGET_SECTOR ], MEM_SIZE, r );
-
-    // compare
-
-    r   = iap.compare( mem, sector_start_adress[ TARGET_SECTOR ] + 256, MEM_SIZE );
-    printf( "compare result     = \"%s\"\r\n", r ? "FAILED" : "OK" );
-
-#endif
-
-    printf( "showing the flash contents...\r\n" );
-    memdump( sector_start_adress[ TARGET_SECTOR ], MEM_SIZE * 3 );
-
-
-#if defined(TARGET_LPC81X) || defined(TARGET_LPC82X)
-    iap.prepare( TARGET_SECTOR, TARGET_SECTOR );
-    r   = iap.erase_page( 241, 241 );   //  241 is page number for sector 7 with 64 byte offset
-
-    printf( "\r\nerase page test\r\n" );
-    printf( "erase page result     = \"%s\"\r\n", r ? "FAILED" : "OK" );
-    printf( "showing memory dump to confirm 0x00003C40 to 0x00003C7F are erased (should be changed to 0xFF)" );
-
-    memdump( sector_start_adress[ TARGET_SECTOR ], MEM_SIZE );
-#endif
-
-
-#if defined(TARGET_LPC11UXX)    //  SAMPLE OF EEPROM ACCESS (LPC11U24 only)
-    printf( "IAP: EEPROM writing test\r\n" );
-    char    mem2[ MEM_SIZE ];
-
-    r   = iap.write_eeprom( mem, (char*)TARGET_EEPROM_ADDRESS, MEM_SIZE );
-    printf( "copied: SRAM(0x%08X)->EEPROM(0x%08X) for %d bytes. (result=0x%08X)\r\n", mem, TARGET_EEPROM_ADDRESS, MEM_SIZE, r );
-
-    r   = iap.read_eeprom( (char*)TARGET_EEPROM_ADDRESS, mem2, MEM_SIZE );
-    printf( "copied: EEPROM(0x%08X)->SRAM(0x%08X) for %d bytes. (result=0x%08X)\r\n", TARGET_EEPROM_ADDRESS, mem, MEM_SIZE, r );
-
-    // compare
-    r = memcmp(mem, mem2, MEM_SIZE);
-    printf( "compare result     = \"%s\"\r\n", r ? "FAILED" : "OK" );
-
-    printf( "showing the EEPROM contents...\r\n" );
-    memdump( mem2, MEM_SIZE );
-#endif
-
 }