Revision 0:a19b70a76e66, committed 2011-04-07

Comitter:

nxpfan

Date:

Thu Apr 07 07:39:06 2011 +0000

Child:

1:a0ac2743f855

Commit message:

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/MARMEX_OB_oled.h	Thu Apr 07 07:39:06 2011 +0000
@@ -0,0 +1,482 @@
+/** MARMEX_OB OLED screen drawing library
+ *
+ *  @class   MARMEX_OB_oled
+ *  @author  tedd
+ *  @version 0.5
+ *  @date    07-Apr-2011
+ *
+ *  Released under the MIT License: http://mbed.org/license/mit
+ *
+ *  MARMEX_OB_oled OLED screen drawing library for mbed
+ *  This code has been written based on sample code and advises
+ *    from Ochiai-san (Marutsu-Elec). Thank you!
+ *
+ *  SPI mode:
+ *    9bit or 8bit SPI mode can be selected by disabling/enabling "#define MARMEX_OB_SPI_8BIT_MODE".
+ *    See source code in this (MARMEX_OB_oled.h) file.
+ */
+
+#ifndef     MBED_MARMEX_OB_OLED
+#define     MBED_MARMEX_OB_OLED
+
+#include    "mbed.h"
+#include    "NokiaLCD.h"
+
+/** @def MARMEX_OB_SPI_8BIT_MODE
+ *
+ *  MARMEX_OB_oled_oled OLED screen SPI access length setting
+ *  Enabling "MARMEX_OB_SPI_8BIT_MODE" makes 9bit SPI access by 8bit * 2 times.
+ *  This may be useful if other 8bit access SPI device on same SPI bus.
+ *
+ *  If disabled (just coment out the "#define MARMEX_OB_SPI_8BIT_MODE"), SPI access willbe done by 9 bit format.
+ */
+//#define MARMEX_OB_SPI_8BIT_MODE
+
+/** MARMEX_OB_oled OLED screen drawing class
+ *
+ *  This is a driver code for MARMEX_OB_oled board OLED screen.
+ *  This class inherits NokiaLCD class of mbed.org.
+ *  To use this class, import the NokiaLCD class from here..
+ *   http://mbed.org/users/simon/libraries/NokiaLCD/
+ *
+ *  Example:
+ *  @code
+ * #include "mbed.h"
+ * #include "MARMEX_OB_oled.h"
+ *
+ * //  oled1 is for MARMEX_OB_oled board on MAPLE slot 1
+ * //  oled2 is for MARMEX_OB_oled board on MAPLE slot 2
+ *
+ * //MARMEX_OB_oled   oled1( p5, p7,  p8, p30, p11 ); // mosi, sclk, cs, rst, power_control
+ * MARMEX_OB_oled   oled2( p5, p7, p26, p21, p17 ); // mosi, sclk, cs, rst, power_control
+ *
+ * int main() {
+ *     oled2.background( 0x000000 );
+ *     oled2.cls();
+ *
+ *     for ( int i = 0; i < 8; i++ )
+ *         oled2.fill(  (MARMEX_OB_oled::WIDTH / 8) * i,  0,  (MARMEX_OB_oled::WIDTH / 8),  128, ((i & 0x4) ? 0xFF0000 : 0x000000) | ((i & 0x2) ? 0x00FF00 : 0x000000) |((i & 0x1) ? 0x0000FF : 0x000000) );
+ *
+ *     oled2.fill(  50,  50,  64,  64, 0xCCCCCC );
+ *
+ *     oled2.locate( 0, 3 );
+ *     oled2.printf( "Hello World!" );
+ *     oled2.locate( 0, 4 );
+ *     oled2.printf( "SPI = %s", MERMEX_OB_SPI_MODE_STR );
+ *
+ *     for (int i = 0; i < MARMEX_OB_oled::WIDTH; i++ ) {
+ *         oled2.pixel( i, 80 + sin( (float)i / 5.0 ) * 10, 0x000000 );
+ *     }
+ * }
+ *  @endcode
+ */
+
+class MARMEX_OB_oled : public NokiaLCD {
+
+public:
+
+    /** General parameters for MARMEX_OB_oled */
+    enum  {
+        ROWS          = 15,         /**< # of rows (lines) for displaying characters  */
+        COLS          = 16,         /**< # of columns (width) for displaying characters  */
+        WIDTH         = 128,        /**< screen width [pixels]  */
+        HEIGHT        = 128,        /**< screen height [pixels]  */
+        SPI_FREQUENCY = 20000000    /**< SPI (sclk) SPI_FREQUENCY  */
+    };
+
+    /** Constants for power() function */
+    enum  {
+        OFF   = 0,  /**< : to turning-OFF  */
+        ON          /**< : to turning-ON   */
+    };
+
+    /** Create a MARMEX_OB_oled object connected to specified SPI and DigitalOut pins
+     *
+     *  @param mosi SPI-MOSI pin (for MAPLE board, use p5)
+     *  @param sclk SPI-SCLK pin (for MAPLE board, use p8)
+     *  @param cs   chip select signal (for MAPLE board, use p8(slot1), p26(slot2))
+     *  @param rst  reset signal (for MAPLE board, use p30(slot1), p21(slot2))
+     *  @param power_pin backlight power control signal (for MAPLE board, use p11(slot1), p17(slot2))
+     *
+     *  Example of MARMEX_OB_oled on MAPLE board:
+     *  @code
+     *  #include "mbed.h"
+     *  #include "MARMEX_OB_oled.h"
+     *
+     *  MARMEX_OB_oled   oled_on_maple_slot1( p5, p7,  p8, p30, p11 ); // mosi, sclk, cs, rst, power_control
+     *  MARMEX_OB_oled   oled_on_maple_slot2( p5, p7, p26, p21, p17 ); // mosi, sclk, cs, rst, power_control
+     *  ...
+     *  ..
+     *  @endcode
+     */
+
+    MARMEX_OB_oled( PinName mosi, PinName sclk, PinName cs, PinName rst, PinName power_pin ) : NokiaLCD( mosi, sclk, cs, rst, NokiaLCD::LCD6100 ), _power_pin( power_pin ) {
+        power( ON );
+        reset();
+    }
+
+#if DOXYGEN_ONLY
+    /** Write a character to the LCD
+     *
+     * @param c The character to write to the display
+     */
+    int putc( int c );
+
+    /** Write a formated string to the LCD
+     *
+     * @param format A printf-style format string, followed by the
+     *               variables to use in formating the string.
+     *
+     *  !!! 16th character in the string will be disappeared
+     *  !!! This problem is due to difference of screen size NokiaLCD library and its internal mechanism...
+     */
+    int printf( const char* format, ... );
+
+    /** Set the foreground colour
+     *
+     * @param c 24-bit colour
+     */
+    void foreground(int c);
+
+    /** Set the background colour
+     *
+     * @param c 24-bit colour
+     */
+    void background(int c);
+
+#endif
+
+    /** reset MARMEX_OB_oled
+     *
+     *  Executes hardware reset and initialize.
+     *  See MARMEX_OB_oled manual for the initialization sequence and values
+     *  For gamma correction table, using math function to make the code simple
+     */
+
+    void reset( void ) {
+
+#define GAMMA_LUT_SIZE 63
+        unsigned char    gamma_LUT[ GAMMA_LUT_SIZE ];
+
+        for ( int i = 0; i < GAMMA_LUT_SIZE; i++ )
+            gamma_LUT[ i ]  = (unsigned char)(powf( ((float)i / 62.0), (1.0 / 0.58) ) * 178.0 + 2.0);
+
+        // setup the SPI interface and bring display out of reset
+        _cs = 1;
+        _rst = 0;
+#ifdef MARMEX_OB_SPI_8BIT_MODE
+        _spi.format( 8 );
+#else
+        _spi.format( 9 );
+#endif
+
+        _spi.frequency( SPI_FREQUENCY );
+        wait_ms( 1 );
+        _rst = 1;
+        wait_ms( 1 );
+
+        _cs = 0;
+
+        command( SET_DISPLAY_MODE_ALL_OFF );
+        command( SET_COMMAND_LOCK );
+        data( 0x12 );
+
+        command( SET_COMMAND_LOCK );
+        data( 0xb1 );
+
+        command( SET_SLEEP_MODE_ON );
+
+        command( FRONT_CLOCK_DRIVER_OSC_FREQ );
+        data( 0xF1 );
+
+        command( SET_MUX_RATIO );
+        data( 0x7F );
+
+        command( SET_DISPAY_OFFSET );
+        data( 0x00 );
+
+        command( SET_DISPAY_START_LINE );
+        data( 0x00 );
+
+        command( SET_REMAP_COLOR_DEPTH );
+        data( 0x74 );
+
+        command( SET_GPIO );
+        data( 0x00);
+
+        command( FUNCTION_SELECTION );
+        data( 0x01 );
+
+        command( SET_SEGMENT_LOW_VOLTAGE );
+        data( 0xA0 );
+        data( 0xB5 );
+        data( 0x55 );
+
+        command( SET_CONTRAST_CURRENT_FOR_COLOR_ABC );
+        data( 0xC8 );
+        data( 0x80 );
+        data( 0xC8 );
+
+        command( MASTER_CONTRAST_CURRENT_CONTROL );
+        data( 0x0F );
+
+        command( LOOKUP_TABLE_FOR_GRAYSCALE_PULSE_WIDTH );
+        for ( int i = 0; i < GAMMA_LUT_SIZE; i++ )
+            data(  gamma_LUT[ i ] );
+
+        command( SET_RESET_PRECHARGE_PERIOD );
+        data( 0x32 );
+
+        command( ENHANCE_DRIVING_SCHEME_CAPABILITY );
+        data( 0x04 );
+        data( 0x00 );
+        data( 0x00 );
+
+        command( SET_PRECHARGE_VOLTAGE );
+        data( 0x17 );
+
+        command( SET_SECOND_PRECHARGE_VOLTAGE );
+        data( 0x01 );
+
+        command( SET_VCOMH_VOLTAGE );
+        data( 0x05 );
+
+        command( SET_DISPLAY_MODE_RESET );
+
+#if 0
+        command( SET_COLUMN_ADDRESS );
+        data( 0x00 );
+        data( 0x7F );
+
+        command( SET_ROW_ADDRESS );
+        data( 0x00 );
+        data( 0x7F);
+
+        command( WRITE_RAM_COMMAND );
+        for ( int i = 0; i < WIDTH * HEIGHT; i++ )
+            data( 0x00 );
+#endif
+        _cs = 1;
+
+        cls();
+        wait_ms( 200 );
+
+        command( SET_SLEEP_MODE_OFF );
+    }
+
+    /** Clear the screen and locate to 0,0 */
+
+    void cls( void ) {
+        fill( 0, 0, WIDTH , HEIGHT, _background );
+        _row = 0;
+        _column = 0;
+    }
+
+    /** Set a pixel on te screen
+     *
+     * @param x horizontal position from left
+     * @param y vertical position from top
+     * @param colour 24-bit colour in format 0x00RRGGBB
+     */
+
+    virtual void pixel( int x, int y, int colour ) {
+        _cs = 0;
+        _window( x, y, 1, 1 );
+        _putp( colour );
+        _cs = 1;
+    }
+
+    /** Fill an area of the screen
+     *
+     * @param x horizontal position from left
+     * @param y vertical position from top
+     * @param width width in pixels
+     * @param height height in pixels
+     * @param colour 24-bit colour in format 0x00RRGGBB
+     */
+
+    void fill( int x, int y, int width, int height, int colour ) {
+        _cs = 0;
+        _window( x, y, width, height );
+
+        for (int i = 0; i < width * height; i++ ) {
+            _putp( colour );
+        }
+
+        _window( 0, 0, WIDTH, HEIGHT );
+        _cs = 1;
+    }
+
+    void blit( int x, int y, int width, int height, const int* colour ) {
+        _cs = 0;
+        _window( x, y, width, height );
+
+        for (int i = 0; i < width * height; i++ ) {
+            _putp( colour[i] );
+        }
+        _window( 0, 0, WIDTH, HEIGHT );
+        _cs = 1;
+    }
+
+    void bitblit( int x, int y, int width, int height, const char* bitstream ) {
+        _cs = 0;
+        _window( x, y, width, height );
+
+        for (int i = 0; i < height * width; i++ ) {
+            int byte = i / 8;
+            int bit = i % 8;
+            int colour = ((bitstream[ byte ] << bit) & 0x80) ? _foreground : _background;
+            _putp( colour );
+        }
+        _window( 0, 0, _width, _height );
+        _cs = 1;
+    }
+
+    /** Screen width
+     *
+     *  @return screen width [pixel]
+     */
+    int width() {
+        return WIDTH;
+    }
+
+    /** Screen height
+     *
+     *  @return screen height [pixel]
+     */
+    int height() {
+        return HEIGHT;
+    }
+    /** Columns
+     *
+     *  @return screen columns
+     */
+    int columns() {
+        return COLS;
+    }
+
+    /** Rows
+     *
+     *  @return screen rows
+     */
+    int rows() {
+        return ROWS;
+    }
+
+    /** Power switch for OLED backlight
+     *
+     * @param sw argument can be MARMEX_OB_oled::ON or MARMEX_OB_oled::OFF
+     */
+
+    void power( unsigned char sw ) {
+        _power_pin  = sw;
+    }
+
+private:
+    /** Command list for the OLED controller */
+    enum {
+        SET_DISPLAY_MODE_ALL_OFF                = 0xA4,
+        SET_COMMAND_LOCK                        = 0xFD,
+        SET_SLEEP_MODE_ON                       = 0xAE,
+        FRONT_CLOCK_DRIVER_OSC_FREQ             = 0xB3,
+        SET_MUX_RATIO                           = 0xCA,
+        SET_DISPAY_OFFSET                       = 0xA2,
+        SET_DISPAY_START_LINE                   = 0xA1,
+        SET_REMAP_COLOR_DEPTH                   = 0xA0,
+        SET_GPIO                                = 0xB5,
+        FUNCTION_SELECTION                      = 0xAB,
+        SET_SEGMENT_LOW_VOLTAGE                 = 0xB4,
+        SET_CONTRAST_CURRENT_FOR_COLOR_ABC      = 0xC1,
+        MASTER_CONTRAST_CURRENT_CONTROL         = 0xC7,
+        LOOKUP_TABLE_FOR_GRAYSCALE_PULSE_WIDTH  = 0xB8,
+        SET_RESET_PRECHARGE_PERIOD              = 0xB1,
+        ENHANCE_DRIVING_SCHEME_CAPABILITY       = 0xB2,
+        SET_PRECHARGE_VOLTAGE                   = 0xBB,
+        SET_SECOND_PRECHARGE_VOLTAGE            = 0xB6,
+        SET_VCOMH_VOLTAGE                       = 0xBE,
+        SET_DISPLAY_MODE_RESET                  = 0xA6,
+        SET_COLUMN_ADDRESS                      = 0x15,
+        SET_ROW_ADDRESS                         = 0x75,
+        WRITE_RAM_COMMAND                       = 0x5C,
+        SET_SLEEP_MODE_OFF                      = 0xAF
+    };
+
+#ifdef MARMEX_OB_SPI_8BIT_MODE
+    void command( int value ) {
+        int tmp = value & 0x00ff;
+        _cs = 0;
+        _spi.write( tmp >> 1 );
+        _spi.write( tmp << 7 );
+        _cs = 1;
+    }
+
+    void data( int value ) {
+        int tmp  = value & 0x00ff;
+        tmp |= 0x0100;
+        _cs = 0;
+        _spi.write( tmp >> 1 );
+        _spi.write( tmp << 7 );
+        _cs = 1;
+    }
+#else
+    void command( int value ) {
+        _cs = 0;
+        _spi.write( value & 0xFF );
+        _cs = 1;
+    }
+
+    void data(int value) {
+        _cs = 0;
+        _spi.write( value | 0x100 );
+        _cs = 1;
+    }
+#endif
+
+    virtual void _window( int x, int y, int width, int height ) {
+        int x1 = x + 0;
+        int y1 = y + 0;
+        int x2 = x1 + width - 1;
+        int y2 = y1 + height - 1;
+
+        command( SET_COLUMN_ADDRESS );
+        data( x1 );
+        data( x2 );
+        command( SET_ROW_ADDRESS );
+        data( y1 );
+        data( y2 );
+        command( WRITE_RAM_COMMAND );
+    }
+
+    void window( int x, int y, int width, int height ) {
+        _cs = 0;
+        _window( x, y, width, height );
+        _cs = 1;
+    }
+
+    void _putp( int colour ) {
+        int cnv = 0;
+
+        cnv  = (colour >> 8) & 0xf800;
+        cnv |= (colour >> 5) & 0x07e0;
+        cnv |= (colour >> 3) & 0x001f;
+
+        data( cnv >> 8);
+        data( cnv );
+    }
+
+    DigitalOut     _power_pin;
+}
+;
+
+#ifdef  MARMEX_OB_SPI_8BIT_MODE
+#define MERMEX_OB_SPI_MODE_STR  "8bit mode"
+#else
+#define MERMEX_OB_SPI_MODE_STR  "9bit mode"
+#endif
+#endif  //  MBED_MARMEX_OB_OLED
+
+
+
+
+
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/NokiaLCD.lib	Thu Apr 07 07:39:06 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/simon/code/NokiaLCD/#2d1b23692cbb

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Thu Apr 07 07:39:06 2011 +0000
@@ -0,0 +1,46 @@
+/** A sample app of MARMEX_OB OLED screen drawing library
+ *
+ *  @author  Tedd
+ *  @version 0.5
+ *  @date    07-Apr-2011
+ *
+ *  Released under the MIT License: http://mbed.org/license/mit
+ *
+ *  MARMEX_OB_oled OLED screen drawing library for mbed
+ *  This code has been written based on sample code and advises
+ *    from Ochiai-san (Marutsu-Elec). Thank you!
+ *  
+ *  To build this code, "NokiaLCD" and "mbed" libraries are needed to be imported in a project. 
+ *     NokiaLCD library :  http://mbed.org/users/simon/libraries/NokiaLCD/
+ */
+
+
+#include "mbed.h"
+#include "MARMEX_OB_oled.h"
+
+//  oled1 is for MARMEX_OB_oled board on MAPLE slot 1
+//  oled1 is for MARMEX_OB_oled board on MAPLE slot 2
+
+MARMEX_OB_oled   oled1( p5, p7,  p8, p30, p11 ); // mosi, sclk, cs, rst, power_control
+//MARMEX_OB_oled   oled2( p5, p7, p26, p21, p17 ); // mosi, sclk, cs, rst, power_control
+
+
+int main() {
+    oled1.background( 0x000000 );
+    oled1.cls();
+
+    for ( int i = 0; i < 8; i++ )
+        oled1.fill(  (MARMEX_OB_oled::WIDTH / 8) * i,  0,  (MARMEX_OB_oled::WIDTH / 8),  128, ((i & 0x4) ? 0xFF0000 : 0x000000) | ((i & 0x2) ? 0x00FF00 : 0x000000) |((i & 0x1) ? 0x0000FF : 0x000000) );
+
+    oled1.fill(  50,  50,  64,  64, 0xCCCCCC );;
+
+    oled1.locate( 0, 3 );
+    oled1.printf( "Hello World!" );
+    oled1.locate( 0, 4 );
+    oled1.printf( "SPI = %s", MERMEX_OB_SPI_MODE_STR );
+
+    for (int i = 0; i < MARMEX_OB_oled::WIDTH; i++ ) {
+        oled1.pixel( i, 80 + sin( (float)i / 5.0 ) * 10, 0x000000 );
+    }
+}
+

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Thu Apr 07 07:39:06 2011 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/029aa53d7323