Nathan Ewin / Mbed 2 deprecated UM6_IMU_AHRS_edit_NJE

Trying to log data from UM6 sensor with GPS receiver LS20031. I have two problems: - I can't log to file at a fast rate (<0.5s) without data values freezing to a fixed value. Print to pc screen it works fine. Ideally I would do this with an interrupt (e.g. ticker) so that the time of each reading is a fixed interval - I removed this as I thought this was causing the problem. - I want to record GPS lat and long. I have setup the GPS ground speed so I know the sensor are communicating. So I possibly havent set the config file to correctly interpet these two signals.

Dependencies:   MODSERIAL mbed

Fork of UM6_IMU_AHRS_2012 by lhiggs CSUM

MODSERIAL/INIT.cpp

Committer:
njewin
Date:
2013-05-04
Revision:
6:43029c69b9ac
Parent:
0:03c649c76388

File content as of revision 6:43029c69b9ac:

/*
    Copyright (c) 2010 Andy Kirkham
 
    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:
 
    The above copyright notice and this permission notice shall be included in
    all copies or substantial portions of the Software.
 
    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
    THE SOFTWARE.
*/

#include "MODSERIAL.h"
#include "MACROS.h"

namespace AjK {

void
MODSERIAL::init( int txSize, int rxSize )
{
    disableIrq();
    
    callbackInfo.setSerial(this);

#ifdef __LPC11UXX_H__

    _base = LPC_USART;
    
#else    
    switch(_uidx) {
        case 0:   _base = LPC_UART0; break;
        case 1:   _base = LPC_UART1; break;
        case 2:   _base = LPC_UART2; break;
        case 3:   _base = LPC_UART3; break;
        default : _base = NULL;      break;
    }
#endif
    
    dmaSendChannel  = -1;
    moddma_p        = (void *)NULL;
    
    if (_base != NULL) {
        buffer_size[RxIrq]     = rxSize;
        buffer[RxIrq]          = rxSize > 0 ? (char *)malloc(buffer_size[RxIrq]) : (char *)NULL;
        buffer_in[RxIrq]       = 0;
        buffer_out[RxIrq]      = 0;
        buffer_count[RxIrq]    = 0;
        buffer_overflow[RxIrq] = 0;
        Serial::attach(this, &MODSERIAL::isr_rx, Serial::RxIrq);        
        
        buffer_size[TxIrq]     = txSize;
        buffer[TxIrq]          = txSize > 0 ? (char *)malloc(buffer_size[TxIrq]) : (char *)NULL;
        buffer_in[TxIrq]       = 0;
        buffer_out[TxIrq]      = 0;
        buffer_count[TxIrq]    = 0;
        buffer_overflow[TxIrq] = 0;
        Serial::attach(this, &MODSERIAL::isr_tx, Serial::TxIrq);
    }
    else {
        error("MODSERIAL must have a defined UART to function.");
    }
    
    _FCR = MODSERIAL_FIFO_ENABLE | MODSERIAL_FIFO_RX_RESET | MODSERIAL_FIFO_TX_RESET;
    
    auto_detect_char = 0;
    
    enableIrq();
}

}; // namespace AjK ends