Nicolas Nackel / Mbed 2 deprecated PPP-Blinky

Small Internet Protocol Stack using a standard serial port.

Dependencies:   mbed

PPP-Blinky - TCP/IP Networking Over a Serial Port

Note: The source code is at the bottom of this page.

/media/uploads/nixnax/blinky-connected.gif
A Windows desktop showing PPP-Blinky in the network connections list.

Describe PPP-Blinky in Three Sentences

PPP-Blinky is a tiny library that enables Internet protocols (IPv4) to any mbed target hardware by using only a serial port.

The code runs on processors with as little as 8k RAM, for example the Nucleo-L053R8 board.

PPP-Blinky uses the industry-standard PPP (Point-to-Point) Protocol and a tiny "stateless" TCP/IP stack.

No Ethernet Port Required

No ethernet port is required - PPP-Blinky uses a serial port to send IP packets to your PC.

PPP-Blinky emulates a standard dial-up modem and therefore connects to Windows, Linux or Adroid machines.

The code runs on most ARM mbed platforms such as the LPC11U24 shown in the picture below:

/media/uploads/nixnax/blinky-to-laptop1.jpg mbed LPC11u24 acting as a webserver to a Windows laptop.

Webserver

The Webserver and WebSocket functions are ideal for building browser-based GUIs on mbed-enabled hardware.

PPP-Blinky's HTTP webserver works with most web clients such as Internet Explorer, Mozilla Firefox, Google Chrome, Safari, Curl, wget and Lynx as well as Microsoft Powershell Invoke-Webrequest command.

In the image below Firefox web browser displays the main web page embedded into PPP-Blinky's code:

/media/uploads/nixnax/ppp-blinky-firefox.jpg Firefox web browser displays a web page embedded into PPP-Blinky's code

WebSocket Service

WebSocket is the most popular protocol standard for real-time bidirectional TCP/IP communication between clients and servers.
In the image below a small Internet Explorer script has connected to PPP-Blinky's WebSocket Service.
A websocket message was then sent by the browser and was echoed back by the WebSocket, triggering the onmessage event in the script.
The WebSocket service enables bidirectional real-time interaction between PPP-Blinky and any element in the browser DOM via JavaScript.
If you already have PPP-Blinky up and running you can test your WebSocket service using this: http://jsfiddle.net/d26cyuh2/112/embedded/result
Websockets are ideal for building browser-based GUIs for mbed hardware.

/media/uploads/nixnax/ppp-blinky-websocke-2.gif

Trying PPP-Blinky on your mbed board

You will need an mbed-enabled hardware board: https://developer.mbed.org/platforms/

Establish a serial port connection between your host PC and your mbed board. The easiest way is to use mbed hardware with a USB serial debug port. I've tried the ST-Micro Nucleo-L476RG, Nucleo-L152RE, Nucleo-F401RE, Nucleo-L432KC, Nucleo-L053R8, mbed-LPC11U24 and mbed-LPC1768 boards and they all work out of the box. Use the mbed online compiler to compile the software for your target board. Save the compiled binary to your hardware.

Before establishing a network connection, you can verify the operation of the code by opening a terminal program such as Tera Term, and setting the baud rate of the COM port on your mbed board to 115200 baud. LED1 should toggle for every two 0x7E (~) (i.e. tilde) characters you type, as 0x7E is the PPP frame start/end marker. Don't forget to close the port when your'e done testing, or else Windows Dial-up Networking will report that the COM port is in use by another program when you try to connect.

Once you are certain that the serial port and firmware is working, proceed to creating a new network connection on your PC -see below.

Creating a Dial-up Connection in Windows

/media/uploads/nixnax/modem.jpg

Setting up Dial-Up Networking (DUN) on your Windows 7 or 8 PC is essentially a two-step process: First, you create a new modem device, because PPP-blinky partially emulates a standard Windows serial port modem device. Second, you create a new Internet connection (in practice, a new network adapter) which is associated with your new "modem".

Step-by-step description of how to configure Windows for PPP-Blinky here:

/users/nixnax/code/PPP-Blinky/wiki/Configuring-Windows-Dial-Up-Networking

There is also a screen on how to set up Linux dial-up networking near the bottom of this page.

Connecting to PPP-Blinky from your PC

Once Windows networking is configured you can establish a dial-up connection to your mbed board over the USB virtual com port.

The IP address you manually assigned to the new dial-up network adapter (172.10.10.1) functions as a gateway to any valid IP address on that subnet. In the screen capture below, I'm sending pings from the Windows 8 command line to my ST-Micro Nucleo-L476RG board over the USB virtual serial Port. I'm also using a second serial port and Tera Term to capture the debug output from a second serial port on the hardware. The optional debug output from the board prints out the IP source and destination address and the first few bytes of the data payload. Note that the source is the adapter IP address, (172.10.10.1 in this case) and the destination is some other address on that subnet - all packets to the subnet are sent to our mbed hardware. For example, you could also ping 172.10.10.123 or, if your PPP-Blinky is running, simply click on this link: http://172.10.10.123

/media/uploads/nixnax/ping-cap-3.gif

One Million Pings!

In the image below the ICMP ("ping") echo reply service was tested by sending one million pings to ppp-Blinky. This took over two hours.
The ping tool used on the Windows 8 PC was psping.exe from PsTools by Mark Russinovich - http://bit.ly/PingFast
The average reply time for a short ping (1 byte of payload data) was 11 milliseconds at 115200 baud on the $10 Nucleo-L053R8 board - barely enough time for 130 bytes to be sent over the port!

/media/uploads/nixnax/ppp-blinky-ping-results.jpg

Monitoring PPP-Blinky Packets

The image below is from a Microsoft Network Monitor 3.4 capture session.

Responses from PPP-Blinky are shown in blue.

Frame 2 - Internet Explorer at IP 172.10.10.1 (the Dial-Up Adapter IP) requests a TCP connection by sending an S (SYN) flag.
Frame 3 - PPP-Blinky at IP 172.10.10.2 responds with an ACK in frame 3. One direction of the link is now established.
Frame 4 - The PC acknowledges the SYN sent by PPP-Blinky in frame 3. The TCP link is now fully established.
Frame 5 - The browser "pushes" (P flag is set) an HTTP GET request to PPP-Blinky.
Frame 6 - PPP-Blinky responds with a standard HTTP response "pushes" (P flag set) back a small web page. It also sets the A (ACK) flag to acknowledge the message sent in frame 6.
Frame 7 - The PC acknowledges reception of the HTTP payload.
Frame 8 - The PC starts to shut down the TCP connection by sending a FIN flag.
Frame 9 - PPP-Blinky acknowledges the FIN request - the connection is now closed in one direction. It also sets a FIN flag in the response to request closure of the opposite direction of the connection.
Frame 10 - The PC acknowledges the FIN request. The closing of the TCP connection is now confirmed in both directions.

/media/uploads/nixnax/ms-network-monitor-http-get-1.gif

Debug Output

PPP-Blinky can output handy debug information to an optional second serial port.
The image below shows the debug output (Ident, Source, Destination, TCP Flags) for a complete HTTP conversation.
The PC messages are displayed in black. PPP-Blinky messages are blue.
Notice how PPP-blinky automatically inserts a blank line after each full HTTP conversation.

/media/uploads/nixnax/tcp-data-3.gif

Creating a Dial-Up Connection in Linux

The screen below shows the required pppd command to connect to PPP-Blinky from a Linux machine. This was much simpler than Windows! The USB serial port of the mbed LPC1768 board registered as /dev/ttyACM0 on my Linux box. Do a websearch on pppd if you want to learn more about pppd, the Linux PPP handler. Near the bottom of the screen below, two webpages are fetched (/ and /y) by using the curl command on the command line. Gnome Webkit and Firefox work fine, too. Also try echo GET / HTTP/1.1 | nc 172.10.10.2 which uses netcat, the "Swiss army knife" of networking tools. PPP-Blinky was also tested with ApacheBench, the Apache server benchmark software. After 100000 fetches, the mean page fetch rate was reported as 6 page fetches per second for a small page.

/media/uploads/nixnax/pppd-screen.png

Caveats

PPP Blinky is an extremely sparse implementation (1.5k lines) of HTTP,WebSocket,TCP, UDP, ICMP, IPCP and LCP over PPP, requiring around 8kB of RAM. The minimum functionality required to establish connectivity is implemented. These are often acceptable tradeoffs for embedded projects as well as a handy tool to learn the practical details of everyday networking implementations.

main.cpp@88:b4a71242837c, 2017-07-21 (annotated)

Committer:
nixnax
Date:
Fri Jul 21 01:02:04 2017 +0000
Revision:
88:b4a71242837c
Parent:
87:9f5ac1fabd95
Child:
89:2c8dd0c2a426
Target debug serial port check

Who changed what in which revision?

UserRevisionLine numberNew contents of line
nixnax 81:9ede60e9a2c8 1 // PPP-Blinky - "My Internet Of Thing"
nixnax 0:2cf4880c312a 2
nixnax 72:ad3d12753acf 3 // A Tiny Webserver Using Windows XP/7/8/10 Dial-Up Networking Over A Serial Port.
nixnax 0:2cf4880c312a 4
nixnax 41:e58a5a09f411 5 // Also receives UDP packets and responds to ping (ICMP Echo requests)
nixnax 4:a469050d5b80 6
nixnax 81:9ede60e9a2c8 7 // Copyright 2016 Nicolas Nackel aka Nixnax. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
nixnax 81:9ede60e9a2c8 8
nixnax 41:e58a5a09f411 9 // Notes and Instructions
nixnax 41:e58a5a09f411 10 // http://bit.ly/PPP-Blinky-Instructions
nixnax 0:2cf4880c312a 11
nixnax 41:e58a5a09f411 12 // Handy reading material
nixnax 6:fba4c2e817b8 13 // https://technet.microsoft.com/en-us/library/cc957992.aspx
nixnax 9:0992486d4a30 14 // https://en.wikibooks.org/wiki/Serial_Programming/IP_Over_Serial_Connections
nixnax 39:b90183d35f1e 15 // http://bit.ly/dialup777error - how to solve Dial Up Error 777 in Windows 7/8/10
nixnax 41:e58a5a09f411 16 // http://atari.kensclassics.org/wcomlog.htm
nixnax 6:fba4c2e817b8 17
nixnax 29:30de79d658f6 18 // Handy tools
nixnax 44:d0c61ae49ea5 19 // https://ttssh2.osdn.jp/index.html.en - Tera Term, a good terminal program to monitor the debug output from the second serial port with!
nixnax 44:d0c61ae49ea5 20 // Wireshark - can't monitor Dial-Up network packets on windows, but useful - can import our dumpFrame routine's hex output
nixnax 29:30de79d658f6 21 // Microsoft network monitor - real-time monitoring of all our packets
nixnax 29:30de79d658f6 22 // http://pingtester.net/ - nice tool for high rate ping testing
nixnax 29:30de79d658f6 23 // http://www.sunshine2k.de/coding/javascript/crc/crc_js.html - Correctly calculates the 16-bit FCS (crc) on our frames (Choose CRC16_CCITT_FALSE)
nixnax 41:e58a5a09f411 24 // The curl.exe program in Windows Powershell - use it like this to stress test the webserver: while (1) { curl 172.10.10.1 }
nixnax 29:30de79d658f6 25 // https://technet.microsoft.com/en-us/sysinternals/pstools.aspx - psping for fast testing of ICMP ping function
nixnax 41:e58a5a09f411 26 // https://eternallybored.org/misc/netcat/ - use netcat -u 172.10.10.1 80 to send/receive UDP packets from PPP-Blinky
nixnax 41:e58a5a09f411 27
nixnax 81:9ede60e9a2c8 28 #include "mbed.h"
nixnax 66:f005b9fdf4d1 29
nixnax 66:f005b9fdf4d1 30 // The #define below enables/disables a SECOND (optional) serial port that prints out interesting diagnostic messages.
nixnax 66:f005b9fdf4d1 31 // Change to SERIAL_PORT_MONITOR_YES to enable diagnostics messages. You need to wire a second serial port to your mbed hardware to monitor this.
nixnax 82:051f77f7dd72 32 #define SERIAL_PORT_MONITOR_NO /* or change to SERIAL_PORT_MONITOR_YES */
nixnax 0:2cf4880c312a 33
nixnax 41:e58a5a09f411 34 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 85:53e57ff1cf05 35
nixnax 85:53e57ff1cf05 36 // here we define the debug serial port for the various target boards
nixnax 85:53e57ff1cf05 37 // add yours if it's not in here
nixnax 88:b4a71242837c 38 #if defined(TARGET_LPC1768)
nixnax 85:53e57ff1cf05 39 Serial xx(p9, p10); // Second serial port on LPC1768 - not required to run, if you get compile error here, change #define SERIAL_PORT_MONITOR_YES to #define SERIAL_PORT_MONITOR_NO
nixnax 88:b4a71242837c 40 #elif defined(TARGET_NUCLEO_F446RE) || defined(TARGET_NUCLEO_L152RE)
nixnax 85:53e57ff1cf05 41 Serial xx(PC_10, PC_11); // Second serial port on NUCLEO boards - not required to run, if you get compile error here, change #define SERIAL_PORT_MONITOR_YES to #define SERIAL_PORT_MONITOR_NO
nixnax 85:53e57ff1cf05 42 #else
nixnax 85:53e57ff1cf05 43 #error Add your target board's second serial port here if you want to use debugging - or choose SERIAL_PORT_MONITOR_NO
nixnax 85:53e57ff1cf05 44 #endif
nixnax 85:53e57ff1cf05 45
nixnax 85:53e57ff1cf05 46
nixnax 42:4de44be70bfd 47 #define debug(x...) xx.printf (x)
nixnax 41:e58a5a09f411 48 #else
nixnax 42:4de44be70bfd 49 #define debug(x...) {}
nixnax 41:e58a5a09f411 50 #endif
nixnax 41:e58a5a09f411 51
nixnax 66:f005b9fdf4d1 52 // verbosity flag used in debug printouts - change to 0 to see less debug info. Lots of interesting info.
nixnax 83:cdcb81d1910f 53 #define v0 1
nixnax 66:f005b9fdf4d1 54 // verbosity flag used in debug printouts - change to 0 to see less debug info. Lots of interesting info.
nixnax 81:9ede60e9a2c8 55 #define v1 0
nixnax 77:abf92baebb42 56 // verbosity flag used in debug printouts - change to 0 to see less debug info. Lots of interesting info.
nixnax 77:abf92baebb42 57 #define v2 0
nixnax 29:30de79d658f6 58
nixnax 66:f005b9fdf4d1 59 // this is the webpage we serve when we get an HTTP request
nixnax 72:ad3d12753acf 60 // keep size under 900 bytes to fit into a single frame
nixnax 66:f005b9fdf4d1 61 const static char ourWebPage[] = "\
nixnax 66:f005b9fdf4d1 62 <!DOCTYPE html>\
nixnax 66:f005b9fdf4d1 63 <html>\
nixnax 66:f005b9fdf4d1 64 <head>\
nixnax 66:f005b9fdf4d1 65 <title>mbed-PPP-Blinky</title>\
nixnax 66:f005b9fdf4d1 66 <script>\
nixnax 66:f005b9fdf4d1 67 window.onload=function(){\
nixnax 66:f005b9fdf4d1 68 setInterval(function(){function x(){return document.getElementById('w');};\
nixnax 66:f005b9fdf4d1 69 x().textContent = parseInt(x().textContent)+1;},100);};\
nixnax 66:f005b9fdf4d1 70 </script>\
nixnax 66:f005b9fdf4d1 71 </head>\
nixnax 66:f005b9fdf4d1 72 <body style=\"font-family: sans-serif; font-size:30px; color:#807070\">\
nixnax 66:f005b9fdf4d1 73 <h1>mbed PPP-Blinky Up and Running</h1>\
nixnax 66:f005b9fdf4d1 74 <h1 id=\"w\" style=\"text-align:center;\">0</h1>\
nixnax 66:f005b9fdf4d1 75 <h1><a href=\"http://bit.ly/pppBlink2\">Source on mbed</a></h1>\
nixnax 66:f005b9fdf4d1 76 </body>\
nixnax 69:23f560087c16 77 </html>"; // around 464 bytes long
nixnax 69:23f560087c16 78
nixnax 69:23f560087c16 79
nixnax 66:f005b9fdf4d1 80
nixnax 73:2f56ec87dbe9 81 // The serial port on your mbed hardware. Your PC should be configured to view this port as a standard dial-up networking modem.
nixnax 73:2f56ec87dbe9 82 // On Windows the model type of the modem should be selected as "Communications cable between two computers"
nixnax 72:ad3d12753acf 83 // The modem baud rate should be set to 115200 baud
nixnax 72:ad3d12753acf 84 // See instructions at the top.
nixnax 73:2f56ec87dbe9 85 // On a typical mbed hardware platform this serial port is a USB virtual com port (VCP) and the USB serial driver is supplied by the board vendor.
nixnax 73:2f56ec87dbe9 86 Serial pc(USBTX, USBRX); // usb virtual com port for mbed hardware
nixnax 29:30de79d658f6 87
nixnax 29:30de79d658f6 88 DigitalOut led1(LED1); // this led toggles when a packet is received
nixnax 4:a469050d5b80 89
nixnax 66:f005b9fdf4d1 90 // the standard hdlc frame start/end character. It's the tilde character "~"
nixnax 4:a469050d5b80 91 #define FRAME_7E (0x7e)
nixnax 29:30de79d658f6 92
nixnax 29:30de79d658f6 93 // the serial port receive buffer and packet buffer
nixnax 0:2cf4880c312a 94
nixnax 29:30de79d658f6 95 // a structure to keep all our ppp globals in
nixnax 29:30de79d658f6 96 struct pppType {
nixnax 38:ab582987926e 97 int online; // we hunt for a PPP connection if this is zero
nixnax 87:9f5ac1fabd95 98 unsigned int ident; // our IP ident value
nixnax 38:ab582987926e 99 unsigned int seq; // our TCP sequence number
nixnax 38:ab582987926e 100 int crc; // for calculating IP and TCP CRCs
nixnax 38:ab582987926e 101 int ledState; // state of LED1
nixnax 87:9f5ac1fabd95 102 int httpFrameCount;
nixnax 4:a469050d5b80 103 struct {
nixnax 81:9ede60e9a2c8 104 #define RXBUFLEN (1<<14)
nixnax 85:53e57ff1cf05 105 char buf[RXBUFLEN]; // RXBUFLEN MUST be a power of two because we use & operator for fast wrap-around in ring buffer
nixnax 72:ad3d12753acf 106 //char * buf;
nixnax 29:30de79d658f6 107 volatile int head;
nixnax 29:30de79d658f6 108 volatile int tail;
nixnax 81:9ede60e9a2c8 109 volatile int buflevel;
nixnax 38:ab582987926e 110 } rx; // serial port objects
nixnax 4:a469050d5b80 111 struct {
nixnax 38:ab582987926e 112 int len; // number of bytes in buffer
nixnax 38:ab582987926e 113 int crc; // PPP CRC (frame check)
nixnax 72:ad3d12753acf 114 //char * buf; // the actual buffer
nixnax 77:abf92baebb42 115 #define TCP_max_size 3300
nixnax 77:abf92baebb42 116 char buf[TCP_max_size]; // send and receive buffer large enough for unstuffed (decoded) hdlc frames
nixnax 38:ab582987926e 117 } pkt; // ppp buffer objects
nixnax 50:ad4e7c3c88e5 118 struct {
nixnax 50:ad4e7c3c88e5 119 int frameStartIndex; // frame start marker
nixnax 50:ad4e7c3c88e5 120 int frameEndIndex; // frame end marker
nixnax 81:9ede60e9a2c8 121 int frameFound; // we have found at least one start of frame already
nixnax 50:ad4e7c3c88e5 122 } hdlc; // hdlc frame objects
nixnax 29:30de79d658f6 123 };
nixnax 31:e000c1b9c565 124
nixnax 29:30de79d658f6 125 pppType ppp; // our global - definitely not thread safe
nixnax 0:2cf4880c312a 126
nixnax 60:2b770949c911 127 // Initialize our globals
nixnax 29:30de79d658f6 128 void pppInitStruct()
nixnax 29:30de79d658f6 129 {
nixnax 81:9ede60e9a2c8 130 memset( ppp.rx.buf, 0, RXBUFLEN);
nixnax 29:30de79d658f6 131 ppp.online=0;
nixnax 29:30de79d658f6 132 ppp.rx.tail=0;
nixnax 29:30de79d658f6 133 ppp.rx.head=0;
nixnax 81:9ede60e9a2c8 134 ppp.rx.buflevel=0;
nixnax 29:30de79d658f6 135 ppp.pkt.len=0;
nixnax 83:cdcb81d1910f 136 ppp.ident=1000;
nixnax 29:30de79d658f6 137 ppp.ledState=0;
nixnax 81:9ede60e9a2c8 138 ppp.hdlc.frameFound=0;
nixnax 81:9ede60e9a2c8 139 ppp.hdlc.frameStartIndex=0;
nixnax 87:9f5ac1fabd95 140 ppp.httpFrameCount=0;
nixnax 29:30de79d658f6 141 }
nixnax 26:11f4eb2663a7 142
nixnax 43:aa57db08995d 143 void led1Toggle()
nixnax 43:aa57db08995d 144 {
nixnax 43:aa57db08995d 145 ppp.ledState = ppp.ledState? 0 : 1;
nixnax 43:aa57db08995d 146 led1 = ppp.ledState;
nixnax 43:aa57db08995d 147 }
nixnax 43:aa57db08995d 148
nixnax 29:30de79d658f6 149 void crcReset()
nixnax 29:30de79d658f6 150 {
nixnax 29:30de79d658f6 151 ppp.crc=0xffff; // crc restart
nixnax 29:30de79d658f6 152 }
nixnax 4:a469050d5b80 153
nixnax 29:30de79d658f6 154 void crcDo(int x) // cumulative crc
nixnax 29:30de79d658f6 155 {
nixnax 29:30de79d658f6 156 for (int i=0; i<8; i++) {
nixnax 29:30de79d658f6 157 ppp.crc=((ppp.crc&1)^(x&1))?(ppp.crc>>1)^0x8408:ppp.crc>>1; // crc calculator
nixnax 29:30de79d658f6 158 x>>=1;
nixnax 29:30de79d658f6 159 }
nixnax 29:30de79d658f6 160 }
nixnax 29:30de79d658f6 161
nixnax 29:30de79d658f6 162 int crcBuf(char * buf, int size) // crc on an entire block of memory
nixnax 29:30de79d658f6 163 {
nixnax 31:e000c1b9c565 164 crcReset();
nixnax 31:e000c1b9c565 165 for(int i=0; i<size; i++)crcDo(*buf++);
nixnax 29:30de79d658f6 166 return ppp.crc;
nixnax 29:30de79d658f6 167 }
nixnax 0:2cf4880c312a 168
nixnax 85:53e57ff1cf05 169
nixnax 85:53e57ff1cf05 170 // fill our own receive buffer with characters from the PPP serial port
nixnax 85:53e57ff1cf05 171 void fillbuf()
nixnax 0:2cf4880c312a 172 {
nixnax 85:53e57ff1cf05 173 if ( pc.readable() ) {
nixnax 85:53e57ff1cf05 174 int hd = (ppp.rx.head+1)&(RXBUFLEN-1); // increment/wrap head index
nixnax 83:cdcb81d1910f 175 if ( hd == ppp.rx.tail ) {
nixnax 85:53e57ff1cf05 176 debug("\nReceive buffer full\n");
nixnax 85:53e57ff1cf05 177 return;
nixnax 83:cdcb81d1910f 178 }
nixnax 17:4918c893d802 179 ppp.rx.buf[ppp.rx.head]=pc.getc(); // insert in rx buffer
nixnax 20:5db9b77b38a6 180 ppp.rx.head = hd; // update head pointer
nixnax 81:9ede60e9a2c8 181 ppp.rx.buflevel++;
nixnax 15:b0154c910143 182 }
nixnax 0:2cf4880c312a 183 }
nixnax 0:2cf4880c312a 184
nixnax 85:53e57ff1cf05 185 int rxbufNotEmpty() // check if rx buffer has data
nixnax 0:2cf4880c312a 186 {
nixnax 43:aa57db08995d 187 int emptyStatus = (ppp.rx.head==ppp.rx.tail) ? 0 : 1 ;
nixnax 43:aa57db08995d 188 return emptyStatus;
nixnax 0:2cf4880c312a 189 }
nixnax 0:2cf4880c312a 190
nixnax 85:53e57ff1cf05 191 int pc_getBuf() // get one character from the buffer
nixnax 0:2cf4880c312a 192 {
nixnax 63:9253b0e1b7d8 193 int x = ppp.rx.buf[ ppp.rx.tail ];
nixnax 81:9ede60e9a2c8 194 ppp.rx.tail=(ppp.rx.tail+1)&(RXBUFLEN-1);
nixnax 81:9ede60e9a2c8 195 ppp.rx.buflevel--;
nixnax 63:9253b0e1b7d8 196 return x;
nixnax 0:2cf4880c312a 197 }
nixnax 0:2cf4880c312a 198
nixnax 50:ad4e7c3c88e5 199 void processHDLCFrame(int start, int end) // process received frame
nixnax 29:30de79d658f6 200 {
nixnax 38:ab582987926e 201 led1Toggle(); // change led1 state on every frame we receive
nixnax 29:30de79d658f6 202 if(start==end) {
nixnax 29:30de79d658f6 203 return;
nixnax 29:30de79d658f6 204 }
nixnax 9:0992486d4a30 205 crcReset();
nixnax 9:0992486d4a30 206 char * dest = ppp.pkt.buf;
nixnax 9:0992486d4a30 207 ppp.pkt.len=0;
nixnax 9:0992486d4a30 208 int unstuff=0;
nixnax 17:4918c893d802 209 int idx = start;
nixnax 17:4918c893d802 210 while(1) {
nixnax 9:0992486d4a30 211 if (unstuff==0) {
nixnax 72:ad3d12753acf 212 if (ppp.rx.buf[idx]==0x7d) unstuff=1;
nixnax 29:30de79d658f6 213 else {
nixnax 72:ad3d12753acf 214 *dest = ppp.rx.buf[idx];
nixnax 29:30de79d658f6 215 ppp.pkt.len++;
nixnax 29:30de79d658f6 216 dest++;
nixnax 72:ad3d12753acf 217 crcDo(ppp.rx.buf[idx]);
nixnax 29:30de79d658f6 218 }
nixnax 66:f005b9fdf4d1 219 } else { // unstuff characters prefixed with 0x7d
nixnax 72:ad3d12753acf 220 *dest = ppp.rx.buf[idx]^0x20;
nixnax 29:30de79d658f6 221 ppp.pkt.len++;
nixnax 29:30de79d658f6 222 dest++;
nixnax 72:ad3d12753acf 223 crcDo(ppp.rx.buf[idx]^0x20);
nixnax 9:0992486d4a30 224 unstuff=0;
nixnax 9:0992486d4a30 225 }
nixnax 81:9ede60e9a2c8 226 idx = (idx+1) & (RXBUFLEN-1);
nixnax 17:4918c893d802 227 if (idx == end) break;
nixnax 9:0992486d4a30 228 }
nixnax 29:30de79d658f6 229 ppp.pkt.crc = ppp.crc & 0xffff;
nixnax 9:0992486d4a30 230 if (ppp.pkt.crc == 0xf0b8) { // check for good CRC
nixnax 16:cb0b80c24ba2 231 void determinePacketType(); // declaration only
nixnax 9:0992486d4a30 232 determinePacketType();
nixnax 29:30de79d658f6 233 } else if (v0) {
nixnax 85:53e57ff1cf05 234 // debug("PPP FCS(crc) Error CRC=%x Length = %d\n",ppp.pkt.crc,ppp.pkt.len); // ignore packets with CRC errors but print a debug line
nixnax 9:0992486d4a30 235 }
nixnax 9:0992486d4a30 236 }
nixnax 9:0992486d4a30 237
nixnax 38:ab582987926e 238 // Note - the hex output of dumpFrame() can be imported into WireShark
nixnax 38:ab582987926e 239 // Capture the frame's hex output in your terminal program and save as a text file
nixnax 38:ab582987926e 240 // In WireShark, use "Import Hex File". Options are: Offset=None, Protocol=PPP.
nixnax 29:30de79d658f6 241 void dumpFrame()
nixnax 29:30de79d658f6 242 {
nixnax 42:4de44be70bfd 243 for(int i=0; i<ppp.pkt.len; i++) debug("%02x ", ppp.pkt.buf[i]);
nixnax 42:4de44be70bfd 244 debug(" C=%02x %02x L=%d\n", ppp.pkt.crc&0xff, (ppp.pkt.crc>>8)&0xff, ppp.pkt.len);
nixnax 16:cb0b80c24ba2 245 }
nixnax 16:cb0b80c24ba2 246
nixnax 29:30de79d658f6 247 void hdlcPut(int ch) // do hdlc handling of special (flag) characters
nixnax 29:30de79d658f6 248 {
nixnax 29:30de79d658f6 249 if ( (ch<0x20) || (ch==0x7d) || (ch==0x7e) ) {
nixnax 29:30de79d658f6 250 pc.putc(0x7d);
nixnax 66:f005b9fdf4d1 251 pc.putc(ch^0x20); // these characters need special handling
nixnax 29:30de79d658f6 252 } else {
nixnax 29:30de79d658f6 253 pc.putc(ch);
nixnax 29:30de79d658f6 254 }
nixnax 11:f58998c24f0b 255 }
nixnax 9:0992486d4a30 256
nixnax 85:53e57ff1cf05 257 void sendFrame() // send a PPP frame in HDLC format
nixnax 29:30de79d658f6 258 {
nixnax 17:4918c893d802 259 int crc = crcBuf(ppp.pkt.buf, ppp.pkt.len-2); // update crc
nixnax 12:db0dc91f0231 260 ppp.pkt.buf[ ppp.pkt.len-2 ] = (~crc>>0); // fcs lo (crc)
nixnax 12:db0dc91f0231 261 ppp.pkt.buf[ ppp.pkt.len-1 ] = (~crc>>8); // fcs hi (crc)
nixnax 16:cb0b80c24ba2 262 pc.putc(0x7e); // hdlc start-of-frame "flag"
nixnax 29:30de79d658f6 263 for(int i=0; i<ppp.pkt.len; i++) hdlcPut( ppp.pkt.buf[i] );
nixnax 16:cb0b80c24ba2 264 pc.putc(0x7e); // hdlc end-of-frame "flag"
nixnax 9:0992486d4a30 265 }
nixnax 9:0992486d4a30 266
nixnax 66:f005b9fdf4d1 267 void ipConfigRequestHandler()
nixnax 29:30de79d658f6 268 {
nixnax 64:677b9713a120 269 debug("IPCP Conf ");
nixnax 9:0992486d4a30 270 if ( ppp.pkt.buf[7] != 4 ) {
nixnax 66:f005b9fdf4d1 271 debug("Rej\n"); // reject any options that are requested
nixnax 9:0992486d4a30 272 ppp.pkt.buf[4]=4;
nixnax 9:0992486d4a30 273 sendFrame();
nixnax 9:0992486d4a30 274 } else {
nixnax 64:677b9713a120 275 debug("Ack\n");
nixnax 9:0992486d4a30 276 ppp.pkt.buf[4]=2; // ack the minimum
nixnax 9:0992486d4a30 277 sendFrame(); // acknowledge
nixnax 64:677b9713a120 278 debug("IPCP Ask\n");
nixnax 9:0992486d4a30 279 // send our own request now
nixnax 12:db0dc91f0231 280 ppp.pkt.buf[4]=1; // request no options
nixnax 9:0992486d4a30 281 ppp.pkt.buf[5]++; // next sequence
nixnax 9:0992486d4a30 282 sendFrame(); // this is our request
nixnax 9:0992486d4a30 283 }
nixnax 9:0992486d4a30 284 }
nixnax 9:0992486d4a30 285
nixnax 29:30de79d658f6 286 void ipAckHandler()
nixnax 29:30de79d658f6 287 {
nixnax 64:677b9713a120 288 debug("IPCP Grant\n");
nixnax 29:30de79d658f6 289 }
nixnax 9:0992486d4a30 290
nixnax 29:30de79d658f6 291 void ipNackHandler()
nixnax 29:30de79d658f6 292 {
nixnax 64:677b9713a120 293 debug("IPCP Nack\n");
nixnax 29:30de79d658f6 294 }
nixnax 9:0992486d4a30 295
nixnax 29:30de79d658f6 296 void ipDefaultHandler()
nixnax 29:30de79d658f6 297 {
nixnax 64:677b9713a120 298 debug("IPCP Other\n");
nixnax 29:30de79d658f6 299 }
nixnax 29:30de79d658f6 300
nixnax 29:30de79d658f6 301 void IPCPframe()
nixnax 29:30de79d658f6 302 {
nixnax 9:0992486d4a30 303 int code = ppp.pkt.buf[4]; // packet type is here
nixnax 9:0992486d4a30 304 switch (code) {
nixnax 29:30de79d658f6 305 case 1:
nixnax 66:f005b9fdf4d1 306 ipConfigRequestHandler();
nixnax 29:30de79d658f6 307 break;
nixnax 29:30de79d658f6 308 case 2:
nixnax 29:30de79d658f6 309 ipAckHandler();
nixnax 29:30de79d658f6 310 break;
nixnax 29:30de79d658f6 311 case 3:
nixnax 29:30de79d658f6 312 ipNackHandler();
nixnax 29:30de79d658f6 313 break;
nixnax 29:30de79d658f6 314 default:
nixnax 29:30de79d658f6 315 ipDefaultHandler();
nixnax 9:0992486d4a30 316 }
nixnax 29:30de79d658f6 317 }
nixnax 9:0992486d4a30 318
nixnax 29:30de79d658f6 319 void UDPpacket()
nixnax 29:30de79d658f6 320 {
nixnax 12:db0dc91f0231 321 char * udpPkt = ppp.pkt.buf+4; // udp packet start
nixnax 16:cb0b80c24ba2 322 int headerSizeIP = (( udpPkt[0]&0xf)*4);
nixnax 29:30de79d658f6 323 char * udpBlock = udpPkt + headerSizeIP; // udp info start
nixnax 63:9253b0e1b7d8 324 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 12:db0dc91f0231 325 char * udpSrc = udpBlock; // source port
nixnax 12:db0dc91f0231 326 char * udpDst = udpBlock+2; // destination port
nixnax 63:9253b0e1b7d8 327 #endif
nixnax 12:db0dc91f0231 328 char * udpLen = udpBlock+4; // udp data length
nixnax 12:db0dc91f0231 329 char * udpInf = udpBlock+8; // actual start of info
nixnax 63:9253b0e1b7d8 330 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 12:db0dc91f0231 331 int srcPort = (udpSrc[0]<<8) | udpSrc[1];
nixnax 12:db0dc91f0231 332 int dstPort = (udpDst[0]<<8) | udpDst[1];
nixnax 12:db0dc91f0231 333 char * srcIP = udpPkt+12; // udp src addr
nixnax 12:db0dc91f0231 334 char * dstIP = udpPkt+16; // udp dst addr
nixnax 55:43faae812be3 335 #endif
nixnax 29:30de79d658f6 336 #define UDP_HEADER_SIZE 8
nixnax 12:db0dc91f0231 337 int udpLength = ((udpLen[0]<<8) | udpLen[1]) - UDP_HEADER_SIZE; // size of the actual udp data
nixnax 81:9ede60e9a2c8 338 if(v0) debug("UDP %d.%d.%d.%d:%d ", srcIP[0],srcIP[1],srcIP[2],srcIP[3],srcPort);
nixnax 81:9ede60e9a2c8 339 if(v0) debug("%d.%d.%d.%d:%d ", dstIP[0],dstIP[1],dstIP[2],dstIP[3],dstPort);
nixnax 83:cdcb81d1910f 340 if(v0) debug("Len %03d", udpLength);
nixnax 29:30de79d658f6 341 int printSize = udpLength;
nixnax 29:30de79d658f6 342 if (printSize > 20) printSize = 20; // print only first 20 characters
nixnax 81:9ede60e9a2c8 343 if (v1) {
nixnax 29:30de79d658f6 344 for (int i=0; i<printSize; i++) {
nixnax 29:30de79d658f6 345 char ch = udpInf[i];
nixnax 29:30de79d658f6 346 if (ch>31 && ch<127) {
nixnax 42:4de44be70bfd 347 debug("%c", ch);
nixnax 29:30de79d658f6 348 } else {
nixnax 64:677b9713a120 349 debug("_");
nixnax 29:30de79d658f6 350 }
nixnax 29:30de79d658f6 351 }
nixnax 29:30de79d658f6 352 }
nixnax 83:cdcb81d1910f 353 if (v0) debug("\n");
nixnax 12:db0dc91f0231 354 }
nixnax 11:f58998c24f0b 355
nixnax 76:00e208cceb8b 356 unsigned int dataCheckSum(unsigned char * ptr, int len)
nixnax 29:30de79d658f6 357 {
nixnax 77:abf92baebb42 358
nixnax 75:0d513869231f 359 unsigned int sum=0;
nixnax 76:00e208cceb8b 360 unsigned char placeHolder;
nixnax 29:30de79d658f6 361 if (len&1) {
nixnax 76:00e208cceb8b 362 placeHolder = ptr[len]; // when length is odd stuff in a zero byte
nixnax 76:00e208cceb8b 363 ptr[len]=0;
nixnax 29:30de79d658f6 364 }
nixnax 29:30de79d658f6 365 for (int i=0; i<len/2; i++) {
nixnax 76:00e208cceb8b 366 unsigned int hi = *ptr;
nixnax 29:30de79d658f6 367 ptr++;
nixnax 76:00e208cceb8b 368 unsigned int lo = *ptr;
nixnax 29:30de79d658f6 369 ptr++;
nixnax 76:00e208cceb8b 370 unsigned int val = ( (hi<<8) | lo );
nixnax 11:f58998c24f0b 371 sum = sum + val;
nixnax 11:f58998c24f0b 372 }
nixnax 29:30de79d658f6 373 if (len&1) {
nixnax 76:00e208cceb8b 374 ptr[len] = placeHolder; // restore the last byte for odd lengths
nixnax 29:30de79d658f6 375 }
nixnax 76:00e208cceb8b 376 sum = (sum & 0xffff) + (sum>>16);
nixnax 76:00e208cceb8b 377 sum = (sum & 0xffff) + (sum>>16); // sum one more time to catch any carry from the carry
nixnax 12:db0dc91f0231 378 return ~sum;
nixnax 29:30de79d658f6 379 }
nixnax 11:f58998c24f0b 380
nixnax 29:30de79d658f6 381 void headerCheckSum()
nixnax 29:30de79d658f6 382 {
nixnax 11:f58998c24f0b 383 int len =(ppp.pkt.buf[4]&0xf)*4; // length of header in bytes
nixnax 11:f58998c24f0b 384 char * ptr = ppp.pkt.buf+4; // start of ip packet
nixnax 11:f58998c24f0b 385 int sum=0;
nixnax 11:f58998c24f0b 386
nixnax 29:30de79d658f6 387 for (int i=0; i<len/2; i++) {
nixnax 29:30de79d658f6 388 int hi = *ptr;
nixnax 29:30de79d658f6 389 ptr++;
nixnax 29:30de79d658f6 390 int lo = *ptr;
nixnax 29:30de79d658f6 391 ptr++;
nixnax 11:f58998c24f0b 392 int val = ( lo & 0xff ) | ( (hi<<8) & 0xff00 );
nixnax 11:f58998c24f0b 393 sum = sum + val;
nixnax 11:f58998c24f0b 394 }
nixnax 11:f58998c24f0b 395 sum = sum + (sum>>16);
nixnax 11:f58998c24f0b 396 sum = ~sum;
nixnax 11:f58998c24f0b 397 ppp.pkt.buf[14]= (sum>>8);
nixnax 11:f58998c24f0b 398 ppp.pkt.buf[15]= (sum );
nixnax 29:30de79d658f6 399 }
nixnax 9:0992486d4a30 400
nixnax 29:30de79d658f6 401 void ICMPpacket() // internet control message protocol
nixnax 29:30de79d658f6 402 {
nixnax 12:db0dc91f0231 403 char * ipPkt = ppp.pkt.buf+4; // ip packet start
nixnax 12:db0dc91f0231 404 char * pktLen = ipPkt+2;
nixnax 12:db0dc91f0231 405 int packetLength = (pktLen[0]<<8) | pktLen[1]; // icmp packet length
nixnax 16:cb0b80c24ba2 406 int headerSizeIP = (( ipPkt[0]&0xf)*4);
nixnax 16:cb0b80c24ba2 407 char * icmpType = ipPkt + headerSizeIP; // icmp data start
nixnax 13:d882b8a042b4 408 char * icmpSum = icmpType+2; // icmp checksum
nixnax 29:30de79d658f6 409 #define ICMP_TYPE_PING_REQUEST 8
nixnax 29:30de79d658f6 410 if ( icmpType[0] == ICMP_TYPE_PING_REQUEST ) {
nixnax 12:db0dc91f0231 411 char * ipTTL = ipPkt+8; // time to live
nixnax 12:db0dc91f0231 412 ipTTL[0]--; // decrement time to live
nixnax 12:db0dc91f0231 413 char * srcAdr = ipPkt+12;
nixnax 12:db0dc91f0231 414 char * dstAdr = ipPkt+16;
nixnax 63:9253b0e1b7d8 415 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 18:3e35de1bc877 416 int icmpIdent = (icmpType[4]<<8)|icmpType[5];
nixnax 29:30de79d658f6 417 int icmpSequence = (icmpType[6]<<8)|icmpType[7];
nixnax 63:9253b0e1b7d8 418 #endif
nixnax 81:9ede60e9a2c8 419 if(v0) debug("ICMP PING %d.%d.%d.%d %d.%d.%d.%d ", srcAdr[0],srcAdr[1],srcAdr[2],srcAdr[3],dstAdr[0],dstAdr[1],dstAdr[2],dstAdr[3]);
nixnax 81:9ede60e9a2c8 420 if(v0) debug("Ident %04x Sequence %04d ",icmpIdent,icmpSequence);
nixnax 29:30de79d658f6 421 char src[4];
nixnax 29:30de79d658f6 422 char dst[4];
nixnax 12:db0dc91f0231 423 memcpy(src, srcAdr,4);
nixnax 12:db0dc91f0231 424 memcpy(dst, dstAdr,4);
nixnax 12:db0dc91f0231 425 memcpy(srcAdr, dst,4);
nixnax 12:db0dc91f0231 426 memcpy(dstAdr, src,4); // swap src & dest ip
nixnax 12:db0dc91f0231 427 char * chkSum = ipPkt+10;
nixnax 29:30de79d658f6 428 chkSum[0]=0;
nixnax 29:30de79d658f6 429 chkSum[1]=0;
nixnax 12:db0dc91f0231 430 headerCheckSum(); // new ip header checksum
nixnax 29:30de79d658f6 431 #define ICMP_TYPE_ECHO_REPLY 0
nixnax 16:cb0b80c24ba2 432 icmpType[0]=ICMP_TYPE_ECHO_REPLY; // icmp echo reply
nixnax 29:30de79d658f6 433 icmpSum[0]=0;
nixnax 29:30de79d658f6 434 icmpSum[1]=0; // zero the checksum for recalculation
nixnax 16:cb0b80c24ba2 435 int icmpLength = packetLength - headerSizeIP; // length of ICMP data portion
nixnax 76:00e208cceb8b 436 unsigned int sum = dataCheckSum( (unsigned char *)icmpType, icmpLength); // this checksum on icmp data portion
nixnax 76:00e208cceb8b 437 icmpSum[0]=(sum>>8)&0xff;
nixnax 76:00e208cceb8b 438 icmpSum[1]=(sum )&0xff; // new checksum for ICMP data portion
nixnax 16:cb0b80c24ba2 439
nixnax 16:cb0b80c24ba2 440 int printSize = icmpLength-8; // exclude size of icmp header
nixnax 25:0b0450e1b08b 441 char * icmpData = icmpType+8; // the actual payload data is after the header
nixnax 25:0b0450e1b08b 442 if (printSize > 10) printSize = 10; // print up to 20 characters
nixnax 29:30de79d658f6 443 if (v0) {
nixnax 29:30de79d658f6 444 for (int i=0; i<printSize; i++) {
nixnax 29:30de79d658f6 445 char ch = icmpData[i];
nixnax 29:30de79d658f6 446 if (ch>31 && ch<127) {
nixnax 42:4de44be70bfd 447 debug("%c",ch);
nixnax 29:30de79d658f6 448 } else {
nixnax 64:677b9713a120 449 debug("_");
nixnax 29:30de79d658f6 450 }
nixnax 29:30de79d658f6 451 }
nixnax 64:677b9713a120 452 debug("\n");
nixnax 29:30de79d658f6 453 }
nixnax 15:b0154c910143 454 sendFrame(); // reply to the ping
nixnax 29:30de79d658f6 455
nixnax 12:db0dc91f0231 456 } else {
nixnax 29:30de79d658f6 457 if (v0) {
nixnax 42:4de44be70bfd 458 debug("ICMP type=%d \n", icmpType[0]);
nixnax 29:30de79d658f6 459 }
nixnax 11:f58998c24f0b 460 }
nixnax 11:f58998c24f0b 461 }
nixnax 11:f58998c24f0b 462
nixnax 29:30de79d658f6 463 void IGMPpacket() // internet group management protocol
nixnax 29:30de79d658f6 464 {
nixnax 29:30de79d658f6 465 if (v0) {
nixnax 42:4de44be70bfd 466 debug("IGMP type=%d \n", ppp.pkt.buf[28]);
nixnax 29:30de79d658f6 467 }
nixnax 29:30de79d658f6 468 }
nixnax 11:f58998c24f0b 469
nixnax 29:30de79d658f6 470 void dumpHeaderIP ()
nixnax 29:30de79d658f6 471 {
nixnax 26:11f4eb2663a7 472 char * ipPkt = ppp.pkt.buf+4; // ip packet start
nixnax 63:9253b0e1b7d8 473 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 26:11f4eb2663a7 474 char * version = ipPkt; // top 4 bits
nixnax 26:11f4eb2663a7 475 char * ihl = ipPkt; // bottom 4 bits
nixnax 26:11f4eb2663a7 476 char * dscp = ipPkt+1; // top 6 bits
nixnax 26:11f4eb2663a7 477 char * ecn = ipPkt+1; // lower 2 bits
nixnax 26:11f4eb2663a7 478 char * pktLen = ipPkt+2; // 2 bytes
nixnax 26:11f4eb2663a7 479 char * ident = ipPkt+4; // 2 bytes
nixnax 26:11f4eb2663a7 480 char * flags = ipPkt+6; // 2 bits
nixnax 26:11f4eb2663a7 481 char * ttl = ipPkt+8; // 1 byte
nixnax 26:11f4eb2663a7 482 char * protocol = ipPkt+9; // 1 byte
nixnax 77:abf92baebb42 483 char * headercheck= ipPkt+10; // 2 bytes
nixnax 63:9253b0e1b7d8 484 #endif
nixnax 26:11f4eb2663a7 485 char * srcAdr = ipPkt+12; // 4 bytes
nixnax 26:11f4eb2663a7 486 char * dstAdr = ipPkt+16; // 4 bytes = total of 20 bytes
nixnax 29:30de79d658f6 487
nixnax 55:43faae812be3 488 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 29:30de79d658f6 489 int versionIP = (version[0]>>4)&0xf;
nixnax 26:11f4eb2663a7 490 int headerSizeIP = (ihl[0]&0xf)*4;
nixnax 26:11f4eb2663a7 491 int dscpIP = (dscp[0]>>2)&0x3f;
nixnax 26:11f4eb2663a7 492 int ecnIP = ecn[0]&3;
nixnax 26:11f4eb2663a7 493 int packetLength = (pktLen[0]<<8)|pktLen[1]; // ip total packet length
nixnax 26:11f4eb2663a7 494 int identIP = (ident[0]<<8)|ident[1];
nixnax 26:11f4eb2663a7 495 int flagsIP = flags[0]>>14&3;
nixnax 26:11f4eb2663a7 496 int ttlIP = ttl[0];
nixnax 26:11f4eb2663a7 497 int protocolIP = protocol[0];
nixnax 76:00e208cceb8b 498 unsigned int checksumIP = (headercheck[0]<<8)|headercheck[1];
nixnax 55:43faae812be3 499 #endif
nixnax 55:43faae812be3 500
nixnax 29:30de79d658f6 501 char srcIP [16];
nixnax 29:30de79d658f6 502 snprintf(srcIP,16, "%d.%d.%d.%d", srcAdr[0],srcAdr[1],srcAdr[2],srcAdr[3]);
nixnax 85:53e57ff1cf05 503 fillbuf();
nixnax 29:30de79d658f6 504 char dstIP [16];
nixnax 29:30de79d658f6 505 snprintf(dstIP,16, "%d.%d.%d.%d", dstAdr[0],dstAdr[1],dstAdr[2],dstAdr[3]);
nixnax 85:53e57ff1cf05 506 fillbuf();
nixnax 82:051f77f7dd72 507 if (v0) debug("IP %s %s v%d h%d d%d e%d L%03d ",srcIP,dstIP,versionIP,headerSizeIP,dscpIP,ecnIP,packetLength);
nixnax 85:53e57ff1cf05 508 fillbuf();
nixnax 42:4de44be70bfd 509 if (v0) debug("i%04x f%d t%d p%d C%04x\n",identIP,flagsIP,ttlIP,protocolIP,checksumIP);
nixnax 29:30de79d658f6 510 }
nixnax 26:11f4eb2663a7 511
nixnax 29:30de79d658f6 512 void dumpHeaderTCP()
nixnax 29:30de79d658f6 513 {
nixnax 83:cdcb81d1910f 514 if( v0 ) {
nixnax 81:9ede60e9a2c8 515
nixnax 81:9ede60e9a2c8 516 int headerSizeIP = (ppp.pkt.buf[4]&0xf)*4; // header size of ip portion
nixnax 81:9ede60e9a2c8 517 char * tcpStart = ppp.pkt.buf+4+headerSizeIP; // start of tcp packet
nixnax 63:9253b0e1b7d8 518 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 81:9ede60e9a2c8 519 char * seqtcp = tcpStart + 4; // 4 bytes
nixnax 81:9ede60e9a2c8 520 char * acktcp = tcpStart + 8; // 4 bytes
nixnax 63:9253b0e1b7d8 521 #endif
nixnax 81:9ede60e9a2c8 522 char * flagbitstcp = tcpStart + 12; // 9 bits
nixnax 63:9253b0e1b7d8 523 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 81:9ede60e9a2c8 524 unsigned int seq = (seqtcp[0]<<24)|(seqtcp[1]<<16)|(seqtcp[2]<<8)|(seqtcp[3]);
nixnax 81:9ede60e9a2c8 525 unsigned int ack = (acktcp[0]<<24)|(acktcp[1]<<16)|(acktcp[2]<<8)|(acktcp[3]);
nixnax 63:9253b0e1b7d8 526 #endif
nixnax 81:9ede60e9a2c8 527 int flags = ((flagbitstcp[0]&1)<<8)|flagbitstcp[1];
nixnax 10:74f8233f72c0 528
nixnax 81:9ede60e9a2c8 529 char flagInfo[10]; // text string presentating the TCP flags
nixnax 81:9ede60e9a2c8 530 memset(flagInfo,'.', 9); // fill string with "........."
nixnax 81:9ede60e9a2c8 531 memset(flagInfo+9,0,1); // null terminate string
nixnax 66:f005b9fdf4d1 532
nixnax 81:9ede60e9a2c8 533 if (flags & (1<<0)) flagInfo[0]='F';
nixnax 81:9ede60e9a2c8 534 if (flags & (1<<1)) flagInfo[1]='S';
nixnax 81:9ede60e9a2c8 535 if (flags & (1<<2)) flagInfo[2]='R';
nixnax 81:9ede60e9a2c8 536 if (flags & (1<<3)) flagInfo[3]='P';
nixnax 81:9ede60e9a2c8 537 if (flags & (1<<4)) flagInfo[4]='A';
nixnax 81:9ede60e9a2c8 538 if (flags & (1<<5)) flagInfo[5]='U';
nixnax 81:9ede60e9a2c8 539 if (flags & (1<<6)) flagInfo[6]='E';
nixnax 81:9ede60e9a2c8 540 if (flags & (1<<7)) flagInfo[7]='C';
nixnax 81:9ede60e9a2c8 541 if (flags & (1<<8)) flagInfo[8]='N';
nixnax 81:9ede60e9a2c8 542 debug("TCP Flags %s Seq %u Ack %u\n", flagInfo, seq, ack); // show the flags in debug
nixnax 29:30de79d658f6 543 }
nixnax 29:30de79d658f6 544 }
nixnax 29:30de79d658f6 545
nixnax 68:0b74763ae67f 546 int httpResponse(char * dataStart)
nixnax 67:a63e3486bcda 547 {
nixnax 67:a63e3486bcda 548 int n=0; // number of bytes we have printed so far
nixnax 77:abf92baebb42 549 int nHeader; // byte size of HTTP header
nixnax 83:cdcb81d1910f 550 int contentLengthStart; // index where HTML starts
nixnax 85:53e57ff1cf05 551
nixnax 87:9f5ac1fabd95 552 ppp.httpFrameCount++; // increment the number of frames we have made
nixnax 85:53e57ff1cf05 553
nixnax 84:456e73151f11 554 int rootFetch = strncmp(dataStart, "GET / HTTP/1.1", 14);
nixnax 77:abf92baebb42 555
nixnax 84:456e73151f11 556 if( rootFetch == 0 ) {
nixnax 67:a63e3486bcda 557 n=n+sprintf(n+dataStart,"HTTP/1.1 200 OK\r\nServer: PPP-Blinky\r\n"); // http header
nixnax 83:cdcb81d1910f 558 } else {
nixnax 67:a63e3486bcda 559 n=n+sprintf(n+dataStart,"HTTP/1.1 404 Not Found\r\nServer: PPP-Blinky\r\n"); // http header
nixnax 83:cdcb81d1910f 560 }
nixnax 85:53e57ff1cf05 561
nixnax 83:cdcb81d1910f 562 n=n+sprintf(n+dataStart,"Content-Length: "); // http header
nixnax 83:cdcb81d1910f 563 contentLengthStart = n; // remember where Content-Length is in buffer
nixnax 83:cdcb81d1910f 564 n=n+sprintf(n+dataStart,"?????\r\n"); // leave five spaces for content length - will be updated later
nixnax 83:cdcb81d1910f 565 n=n+sprintf(n+dataStart,"Connection: close\r\n"); // close connection immediately
nixnax 83:cdcb81d1910f 566 n=n+sprintf(n+dataStart,"Content-Type: text/html; charset=us-ascii\r\n\r\n"); // http header must end with empty line (\r\n)
nixnax 83:cdcb81d1910f 567 nHeader=n; // size of HTTP header
nixnax 67:a63e3486bcda 568
nixnax 84:456e73151f11 569 if( rootFetch == 0 ) {
nixnax 83:cdcb81d1910f 570 // this is where we insert our web page into the buffer
nixnax 83:cdcb81d1910f 571 n=n+sprintf(n+dataStart,"%s", ourWebPage);
nixnax 85:53e57ff1cf05 572 } else {
nixnax 87:9f5ac1fabd95 573 // all other requests get 404 Not Found response with a http frame count - nice for debugging
nixnax 87:9f5ac1fabd95 574 n=n+sprintf(n+dataStart,"<!DOCTYPE html><title>ppp-blinky</title>"); // html start
nixnax 87:9f5ac1fabd95 575 n=n+sprintf(n+dataStart,"<body>%06d</body>",ppp.httpFrameCount); // body = the http frame count
nixnax 83:cdcb81d1910f 576 }
nixnax 85:53e57ff1cf05 577
nixnax 87:9f5ac1fabd95 578 while( (n%4)!= 2) n=n+sprintf(n+dataStart," "); // insert spaces until n is exactly two away from a multiple of four
nixnax 87:9f5ac1fabd95 579 n=n+sprintf(n+dataStart,"\r\n"); // add the last two characters (\r\n) - n is now an exact multiple of four
nixnax 87:9f5ac1fabd95 580
nixnax 83:cdcb81d1910f 581 #define CONTENTLENGTHSIZE 5
nixnax 83:cdcb81d1910f 582 char contentLengthString[CONTENTLENGTHSIZE+1];
nixnax 83:cdcb81d1910f 583 snprintf(contentLengthString,CONTENTLENGTHSIZE+1,"%*d",CONTENTLENGTHSIZE,n-nHeader); // print Content-Length with leading spaces and fixed width equal to csize
nixnax 83:cdcb81d1910f 584 memcpy(dataStart+contentLengthStart, contentLengthString, CONTENTLENGTHSIZE); // copy Content-Length to it's place in the send buffer
nixnax 67:a63e3486bcda 585
nixnax 77:abf92baebb42 586 if (v2) {
nixnax 77:abf92baebb42 587 debug("HTTP Response: HTTP-header %d HTTP-content %d HTTP-total %d\n",nHeader,n-nHeader,n);
nixnax 77:abf92baebb42 588 }
nixnax 67:a63e3486bcda 589 return n; // total byte size of our response
nixnax 67:a63e3486bcda 590 }
nixnax 67:a63e3486bcda 591
nixnax 67:a63e3486bcda 592
nixnax 29:30de79d658f6 593 void tcpHandler()
nixnax 29:30de79d658f6 594 {
nixnax 87:9f5ac1fabd95 595 // IP header
nixnax 87:9f5ac1fabd95 596
nixnax 26:11f4eb2663a7 597 char * ipPkt = ppp.pkt.buf+4; // ip packet start
nixnax 26:11f4eb2663a7 598 char * ihl = ipPkt; // bottom 4 bits
nixnax 83:cdcb81d1910f 599 char * pktLen = ipPkt+2; // 2 bytes
nixnax 26:11f4eb2663a7 600 char * ident = ipPkt+4; // 2 bytes
nixnax 28:1aa629be05e7 601 char * protocol = ipPkt+9; // 1 byte
nixnax 83:cdcb81d1910f 602 char * headercheck= ipPkt+10; // 2 bytes
nixnax 26:11f4eb2663a7 603 char * srcAdr = ipPkt+12; // 4 bytes
nixnax 26:11f4eb2663a7 604 char * dstAdr = ipPkt+16; // 4 bytes = total of 20 bytes
nixnax 26:11f4eb2663a7 605 int headerSizeIP = (ihl[0]&0xf)*4;
nixnax 26:11f4eb2663a7 606 int packetLength = (pktLen[0]<<8)|pktLen[1]; // ip total packet length
nixnax 26:11f4eb2663a7 607
nixnax 87:9f5ac1fabd95 608 // TCP header
nixnax 87:9f5ac1fabd95 609
nixnax 87:9f5ac1fabd95 610 char * tcp = ppp.pkt.buf+4+headerSizeIP; // start of tcp packet
nixnax 87:9f5ac1fabd95 611 char * srctcp = tcp + 0; // 2 bytes
nixnax 87:9f5ac1fabd95 612 char * dsttcp = tcp + 2; // 2 bytes
nixnax 87:9f5ac1fabd95 613 char * seqtcp = tcp + 4; // 4 bytes
nixnax 87:9f5ac1fabd95 614 char * acktcp = tcp + 8; // 4 bytes
nixnax 87:9f5ac1fabd95 615 char * offset = tcp + 12; // 4 bits
nixnax 87:9f5ac1fabd95 616 char * flagbitstcp = tcp + 12; // 9 bits
nixnax 87:9f5ac1fabd95 617 char * windowsizetcp = tcp + 14; // 2 bytes
nixnax 87:9f5ac1fabd95 618 char * checksumtcp = tcp + 16; // 2 bytes
nixnax 26:11f4eb2663a7 619
nixnax 26:11f4eb2663a7 620 int tcpSize = packetLength - headerSizeIP;
nixnax 35:e7068df4d971 621 int headerSizeTCP = ((offset[0]>>4)&0x0f)*4; // size of tcp header only
nixnax 61:b3c1a04efd0a 622 int protocolIP = protocol[0];
nixnax 29:30de79d658f6 623
nixnax 87:9f5ac1fabd95 624 char * tcpDataIn = tcp + headerSizeTCP; // start of data block after TCP header
nixnax 67:a63e3486bcda 625 int tcpDataSize = tcpSize - headerSizeTCP; // size of data block after TCP header
nixnax 87:9f5ac1fabd95 626 char * tcpDataOut = tcp + 20; // start of outgoing data
nixnax 81:9ede60e9a2c8 627
nixnax 85:53e57ff1cf05 628 unsigned int seq_in = (seqtcp[0]<<24)|(seqtcp[1]<<16)|(seqtcp[2]<<8)|(seqtcp[3]);
nixnax 85:53e57ff1cf05 629 unsigned int ack_in = (acktcp[0]<<24)|(acktcp[1]<<16)|(acktcp[2]<<8)|(acktcp[3]);
nixnax 85:53e57ff1cf05 630
nixnax 85:53e57ff1cf05 631 unsigned int ack_out = seq_in + tcpDataSize;
nixnax 87:9f5ac1fabd95 632 unsigned int seq_out = ack_in; // use their version of our current sequence number
nixnax 81:9ede60e9a2c8 633
nixnax 28:1aa629be05e7 634
nixnax 29:30de79d658f6 635 #define TCP_FLAG_ACK (1<<4)
nixnax 29:30de79d658f6 636 #define TCP_FLAG_SYN (1<<1)
nixnax 29:30de79d658f6 637 #define TCP_FLAG_PSH (1<<3)
nixnax 29:30de79d658f6 638 #define TCP_FLAG_RST (1<<2)
nixnax 29:30de79d658f6 639 #define TCP_FLAG_FIN (1<<0)
nixnax 28:1aa629be05e7 640
nixnax 87:9f5ac1fabd95 641 // first we shorten the TCP response header to only 20 bytes.
nixnax 87:9f5ac1fabd95 642 // this means we ignore all TCP option requests
nixnax 87:9f5ac1fabd95 643
nixnax 87:9f5ac1fabd95 644 tcpSize = 20; // shorten total TCP packet size to 20 bytes (no data)
nixnax 87:9f5ac1fabd95 645 headerSizeTCP = 20; // shorten outgoing TCP header size 20 bytes
nixnax 87:9f5ac1fabd95 646 offset[0] = (headerSizeTCP/4)<<4; // shorten tcp header size to 20 bytes
nixnax 87:9f5ac1fabd95 647 packetLength = 40; // shorten total packet size to 40 bytes (20 ip + 20 tcp)
nixnax 87:9f5ac1fabd95 648 pktLen[1] = 40; // set total packet size to 40 bytes (20 ip + 20 tcp)
nixnax 87:9f5ac1fabd95 649 pktLen[0] = 0; // set total packet size to 40 bytes (20 ip + 20 tcp)
nixnax 87:9f5ac1fabd95 650
nixnax 35:e7068df4d971 651 int dataLen = 0; // most of our responses will have zero TCP data, only a header
nixnax 38:ab582987926e 652 int flagsOut = TCP_FLAG_ACK; // the default case is an ACK packet
nixnax 87:9f5ac1fabd95 653 int flagsTCP = ((flagbitstcp[0]&1)<<8)|flagbitstcp[1]; // the tcp flags we received
nixnax 38:ab582987926e 654
nixnax 69:23f560087c16 655 // A sparse TCP flag interpreter that implements simple TCP connections from a single source
nixnax 69:23f560087c16 656 // Clients are allowed ONE push packet, after which the link is closed with a FIN flag in the ACK packet
nixnax 69:23f560087c16 657 // This strategy allows web browsers, netcat and curl to work ok while keeping the state machine simple
nixnax 77:abf92baebb42 658
nixnax 69:23f560087c16 659 switch ( flagsTCP ) {
nixnax 69:23f560087c16 660 case TCP_FLAG_SYN:
nixnax 87:9f5ac1fabd95 661 flagsOut = TCP_FLAG_SYN | TCP_FLAG_ACK; // something wants to connect - acknowledge it
nixnax 87:9f5ac1fabd95 662 seq_out = seq_in+0x1000U; // create a new sequence number using their sequence as a base
nixnax 85:53e57ff1cf05 663 ack_out++; // for SYN flag we have to increase the sequence by 1
nixnax 69:23f560087c16 664 break;
nixnax 77:abf92baebb42 665 case TCP_FLAG_ACK | TCP_FLAG_PSH:
nixnax 69:23f560087c16 666 flagsOut = TCP_FLAG_ACK | TCP_FLAG_FIN; // for every push we answer once AND close the link
nixnax 87:9f5ac1fabd95 667 if ( strncmp(tcpDataIn, "GET ", 4) == 0) { // check for an http GET command
nixnax 87:9f5ac1fabd95 668 dataLen = httpResponse(tcpDataOut); // send an http response
nixnax 69:23f560087c16 669 }
nixnax 69:23f560087c16 670 break;
nixnax 77:abf92baebb42 671 case TCP_FLAG_FIN:
nixnax 69:23f560087c16 672 case TCP_FLAG_FIN | TCP_FLAG_ACK:
nixnax 85:53e57ff1cf05 673 ack_out++; // for FIN flag we always have to increase sequence by 1
nixnax 69:23f560087c16 674 break;
nixnax 77:abf92baebb42 675 default:
nixnax 69:23f560087c16 676 return; // ignore remaining packets
nixnax 28:1aa629be05e7 677 }
nixnax 81:9ede60e9a2c8 678
nixnax 77:abf92baebb42 679
nixnax 69:23f560087c16 680 // The TCP flag handling is now done
nixnax 38:ab582987926e 681 // Now we have to recalculate all the header sizes, swap IP address/port source and destination, and do the IP and TCP checksums
nixnax 26:11f4eb2663a7 682
nixnax 87:9f5ac1fabd95 683 ppp.ident++; // get next ident number for our packet
nixnax 83:cdcb81d1910f 684 ident[0] = ppp.ident>>8;
nixnax 83:cdcb81d1910f 685 ident[1] = ppp.ident>>0; // insert OUR ident
nixnax 83:cdcb81d1910f 686
nixnax 65:23b17c43aa0f 687 char tempHold[12]; // it's 12 long because we later reuse it when building the TCP pseudo-header
nixnax 60:2b770949c911 688 memcpy(tempHold, srcAdr,4);
nixnax 65:23b17c43aa0f 689 memcpy(srcAdr, dstAdr,4);
nixnax 60:2b770949c911 690 memcpy(dstAdr, tempHold,4); // swap ip address source/dest
nixnax 60:2b770949c911 691
nixnax 60:2b770949c911 692 memcpy(tempHold, srctcp,2);
nixnax 65:23b17c43aa0f 693 memcpy(srctcp, dsttcp,2);
nixnax 60:2b770949c911 694 memcpy(dsttcp, tempHold,2); // swap ip port source/dest
nixnax 83:cdcb81d1910f 695
nixnax 87:9f5ac1fabd95 696 windowsizetcp[0]=4; // ignore window size negotiation
nixnax 82:051f77f7dd72 697 windowsizetcp[1]=0; // ignore winodw size negotiation
nixnax 29:30de79d658f6 698
nixnax 85:53e57ff1cf05 699 acktcp[0]=ack_out>>24;
nixnax 85:53e57ff1cf05 700 acktcp[1]=ack_out>>16;
nixnax 85:53e57ff1cf05 701 acktcp[2]=ack_out>>8;
nixnax 85:53e57ff1cf05 702 acktcp[3]=ack_out>>0; // save ack 32-bit integer
nixnax 38:ab582987926e 703
nixnax 85:53e57ff1cf05 704 seqtcp[0]=seq_out>>24;
nixnax 85:53e57ff1cf05 705 seqtcp[1]=seq_out>>16;
nixnax 85:53e57ff1cf05 706 seqtcp[2]=seq_out>>8;
nixnax 85:53e57ff1cf05 707 seqtcp[3]=seq_out>>0; // save seq 32-bit integer
nixnax 38:ab582987926e 708
nixnax 38:ab582987926e 709 flagbitstcp[1] = flagsOut; // set up the new flags
nixnax 38:ab582987926e 710
nixnax 38:ab582987926e 711 int newPacketSize = headerSizeIP + headerSizeTCP + dataLen; // calculate size of the outgoing packet
nixnax 36:2a9b457f8276 712 pktLen[0] = (newPacketSize>>8);
nixnax 36:2a9b457f8276 713 pktLen[1]=newPacketSize; // ip total packet size
nixnax 36:2a9b457f8276 714 ppp.pkt.len = newPacketSize+6; // ppp packet length
nixnax 36:2a9b457f8276 715 tcpSize = headerSizeTCP + dataLen; // tcp packet size
nixnax 36:2a9b457f8276 716
nixnax 38:ab582987926e 717 // the header is all set up, now do the IP and TCP checksums
nixnax 36:2a9b457f8276 718
nixnax 61:b3c1a04efd0a 719 headercheck[0]=0; // IP header checksum
nixnax 61:b3c1a04efd0a 720 headercheck[1]=0; // IP header checksum
nixnax 61:b3c1a04efd0a 721 headerCheckSum(); // calculate the IP header checksum
nixnax 63:9253b0e1b7d8 722
nixnax 64:677b9713a120 723 // now we have to build the so-called 12-byte TCP "pseudo-header" in front of the TCP header (containing some IP header values) in order to correctly calculate the TCP checksum
nixnax 63:9253b0e1b7d8 724 // this header contains the most important parts of the IP header, i.e. source and destination address, protocol number and data length.
nixnax 63:9253b0e1b7d8 725
nixnax 87:9f5ac1fabd95 726 char * pseudoHeader = tcp-12; // mark the start of the TCP pseudo-header
nixnax 67:a63e3486bcda 727 memcpy(tempHold, pseudoHeader, 12); // preserve the 12 bytes of the IP header where the TCP pseudo-Header will be built
nixnax 61:b3c1a04efd0a 728 memcpy( pseudoHeader+0, srcAdr, 8); // IP source and destination addresses from IP header
nixnax 61:b3c1a04efd0a 729 memset( pseudoHeader+8, 0, 1); // reserved, set to zero
nixnax 61:b3c1a04efd0a 730 memset( pseudoHeader+9, protocolIP, 1); // protocol from IP header
nixnax 62:f192926e42f1 731 memset( pseudoHeader+10, tcpSize>>8, 1); // size of IP data (TCP packet size)
nixnax 62:f192926e42f1 732 memset( pseudoHeader+11, tcpSize, 1); // size of IP data (TCP packet size)
nixnax 38:ab582987926e 733
nixnax 61:b3c1a04efd0a 734 // pseudo-header built, now we can calculate TCP checksum
nixnax 63:9253b0e1b7d8 735
nixnax 29:30de79d658f6 736 checksumtcp[0]=0;
nixnax 29:30de79d658f6 737 checksumtcp[1]=0;
nixnax 76:00e208cceb8b 738 unsigned int pseudoHeaderSum=dataCheckSum((unsigned char *)pseudoHeader,tcpSize+12); // calculate the TCP checksum starting at the pseudo-header
nixnax 61:b3c1a04efd0a 739 checksumtcp[0]=pseudoHeaderSum>>8;
nixnax 61:b3c1a04efd0a 740 checksumtcp[1]=pseudoHeaderSum;
nixnax 87:9f5ac1fabd95 741 memcpy( tcp-12, tempHold, 12); // restore the 12 bytes that the pseudo-header overwrote
nixnax 60:2b770949c911 742
nixnax 83:cdcb81d1910f 743 sendFrame(); // All preparation complete - send the TCP response
nixnax 83:cdcb81d1910f 744 dumpHeaderIP();
nixnax 81:9ede60e9a2c8 745 dumpHeaderTCP();
nixnax 29:30de79d658f6 746 }
nixnax 26:11f4eb2663a7 747
nixnax 29:30de79d658f6 748 void dumpDataTCP()
nixnax 29:30de79d658f6 749 {
nixnax 26:11f4eb2663a7 750 int ipPktLen = (ppp.pkt.buf[6]<<8)|ppp.pkt.buf[7]; // overall length of ip packet
nixnax 26:11f4eb2663a7 751 int ipHeaderLen = (ppp.pkt.buf[4]&0xf)*4; // length of ip header
nixnax 35:e7068df4d971 752 int headerSizeTCP = ((ppp.pkt.buf[4+ipHeaderLen+12]>>4)&0xf)*4;; // length of tcp header
nixnax 35:e7068df4d971 753 int dataLen = ipPktLen - ipHeaderLen - headerSizeTCP; // data is what's left after the two headers
nixnax 29:30de79d658f6 754 if (v1) {
nixnax 42:4de44be70bfd 755 debug("TCP %d ipHeader %d tcpHeader %d Data %d\n", ipPktLen, ipHeaderLen, headerSizeTCP, dataLen); // 1 for more verbose
nixnax 29:30de79d658f6 756 }
nixnax 29:30de79d658f6 757 if (dataLen > 0) {
nixnax 47:00a5ca075f8f 758 ppp.pkt.buf[4+ipHeaderLen+headerSizeTCP+dataLen]=0; // insert a null after the data so debug printf stops printing after the data
nixnax 42:4de44be70bfd 759 debug("%s\n",ppp.pkt.buf+4+ipHeaderLen+headerSizeTCP); // show the data
nixnax 29:30de79d658f6 760 }
nixnax 29:30de79d658f6 761 }
nixnax 26:11f4eb2663a7 762
nixnax 29:30de79d658f6 763 void TCPpacket()
nixnax 29:30de79d658f6 764 {
nixnax 83:cdcb81d1910f 765 dumpHeaderIP();
nixnax 81:9ede60e9a2c8 766 dumpHeaderTCP();
nixnax 77:abf92baebb42 767 if (v2) {
nixnax 77:abf92baebb42 768 dumpDataTCP();
nixnax 77:abf92baebb42 769 }
nixnax 26:11f4eb2663a7 770 tcpHandler();
nixnax 11:f58998c24f0b 771 }
nixnax 11:f58998c24f0b 772
nixnax 29:30de79d658f6 773 void otherProtocol()
nixnax 29:30de79d658f6 774 {
nixnax 64:677b9713a120 775 debug("Other IP protocol");
nixnax 29:30de79d658f6 776 }
nixnax 26:11f4eb2663a7 777
nixnax 29:30de79d658f6 778 void IPframe()
nixnax 29:30de79d658f6 779 {
nixnax 10:74f8233f72c0 780 int protocol = ppp.pkt.buf[13];
nixnax 10:74f8233f72c0 781 switch (protocol) {
nixnax 29:30de79d658f6 782 case 1:
nixnax 29:30de79d658f6 783 ICMPpacket();
nixnax 29:30de79d658f6 784 break;
nixnax 29:30de79d658f6 785 case 2:
nixnax 29:30de79d658f6 786 IGMPpacket();
nixnax 29:30de79d658f6 787 break;
nixnax 29:30de79d658f6 788 case 17:
nixnax 29:30de79d658f6 789 UDPpacket();
nixnax 29:30de79d658f6 790 break;
nixnax 29:30de79d658f6 791 case 6:
nixnax 29:30de79d658f6 792 TCPpacket();
nixnax 29:30de79d658f6 793 break;
nixnax 29:30de79d658f6 794 default:
nixnax 29:30de79d658f6 795 otherProtocol();
nixnax 29:30de79d658f6 796 }
nixnax 29:30de79d658f6 797 }
nixnax 9:0992486d4a30 798
nixnax 29:30de79d658f6 799 void LCPconfReq()
nixnax 29:30de79d658f6 800 {
nixnax 64:677b9713a120 801 debug("LCP Config ");
nixnax 9:0992486d4a30 802 if (ppp.pkt.buf[7] != 4) {
nixnax 85:53e57ff1cf05 803 ppp.pkt.buf[4]=4; // allow only "no options" which means Maximum Receive Unit (MRU) is 1500 bytes
nixnax 64:677b9713a120 804 debug("Reject\n");
nixnax 29:30de79d658f6 805 sendFrame();
nixnax 9:0992486d4a30 806 } else {
nixnax 9:0992486d4a30 807 ppp.pkt.buf[4]=2; // ack zero conf
nixnax 64:677b9713a120 808 debug("Ack\n");
nixnax 9:0992486d4a30 809 sendFrame();
nixnax 64:677b9713a120 810 debug("LCP Ask\n");
nixnax 11:f58998c24f0b 811 ppp.pkt.buf[4]=1; // request no options
nixnax 9:0992486d4a30 812 sendFrame();
nixnax 9:0992486d4a30 813 }
nixnax 9:0992486d4a30 814 }
nixnax 9:0992486d4a30 815
nixnax 29:30de79d658f6 816 void LCPconfAck()
nixnax 29:30de79d658f6 817 {
nixnax 64:677b9713a120 818 debug("LCP Ack\n");
nixnax 29:30de79d658f6 819 }
nixnax 9:0992486d4a30 820
nixnax 29:30de79d658f6 821 void LCPend()
nixnax 29:30de79d658f6 822 {
nixnax 29:30de79d658f6 823 ppp.pkt.buf[4]=6;
nixnax 29:30de79d658f6 824 sendFrame(); // acknowledge
nixnax 81:9ede60e9a2c8 825 ppp.online=0; // start hunting for connect string again
nixnax 81:9ede60e9a2c8 826 pppInitStruct(); // flush the receive buffer
nixnax 81:9ede60e9a2c8 827 debug("LCP End\n");
nixnax 9:0992486d4a30 828 }
nixnax 9:0992486d4a30 829
nixnax 29:30de79d658f6 830 void LCPother()
nixnax 29:30de79d658f6 831 {
nixnax 64:677b9713a120 832 debug("LCP Other\n");
nixnax 29:30de79d658f6 833 dumpFrame();
nixnax 29:30de79d658f6 834 }
nixnax 29:30de79d658f6 835
nixnax 29:30de79d658f6 836 void LCPframe()
nixnax 29:30de79d658f6 837 {
nixnax 29:30de79d658f6 838 int code = ppp.pkt.buf[4];
nixnax 29:30de79d658f6 839 switch (code) {
nixnax 29:30de79d658f6 840 case 1:
nixnax 29:30de79d658f6 841 LCPconfReq();
nixnax 29:30de79d658f6 842 break; // config request
nixnax 29:30de79d658f6 843 case 2:
nixnax 29:30de79d658f6 844 LCPconfAck();
nixnax 29:30de79d658f6 845 break; // config ack
nixnax 29:30de79d658f6 846 case 5:
nixnax 29:30de79d658f6 847 LCPend();
nixnax 29:30de79d658f6 848 break; // end connection
nixnax 29:30de79d658f6 849 default:
nixnax 29:30de79d658f6 850 LCPother();
nixnax 29:30de79d658f6 851 }
nixnax 9:0992486d4a30 852 }
nixnax 9:0992486d4a30 853
nixnax 29:30de79d658f6 854 void discardedFrame()
nixnax 29:30de79d658f6 855 {
nixnax 29:30de79d658f6 856 if (v0) {
nixnax 71:965619fedb3a 857 debug("Frame is not IP, IPCP or LCP: %02x %02x %02x %02x\n", ppp.pkt.buf[0],ppp.pkt.buf[1],ppp.pkt.buf[2],ppp.pkt.buf[3]);
nixnax 29:30de79d658f6 858 }
nixnax 9:0992486d4a30 859 }
nixnax 9:0992486d4a30 860
nixnax 29:30de79d658f6 861 void determinePacketType()
nixnax 29:30de79d658f6 862 {
nixnax 29:30de79d658f6 863 if ( ppp.pkt.buf[0] != 0xff ) {
nixnax 64:677b9713a120 864 debug("byte0 != ff\n");
nixnax 29:30de79d658f6 865 return;
nixnax 29:30de79d658f6 866 }
nixnax 29:30de79d658f6 867 if ( ppp.pkt.buf[1] != 3 ) {
nixnax 64:677b9713a120 868 debug("byte1 != 3\n");
nixnax 29:30de79d658f6 869 return;
nixnax 29:30de79d658f6 870 }
nixnax 29:30de79d658f6 871 if ( ppp.pkt.buf[3] != 0x21 ) {
nixnax 64:677b9713a120 872 debug("byte2 != 21\n");
nixnax 29:30de79d658f6 873 return;
nixnax 29:30de79d658f6 874 }
nixnax 9:0992486d4a30 875 int packetType = ppp.pkt.buf[2];
nixnax 9:0992486d4a30 876 switch (packetType) {
nixnax 29:30de79d658f6 877 case 0xc0:
nixnax 29:30de79d658f6 878 LCPframe();
nixnax 29:30de79d658f6 879 break; // link control
nixnax 29:30de79d658f6 880 case 0x80:
nixnax 29:30de79d658f6 881 IPCPframe();
nixnax 29:30de79d658f6 882 break; // IP control
nixnax 29:30de79d658f6 883 case 0x00:
nixnax 29:30de79d658f6 884 IPframe();
nixnax 29:30de79d658f6 885 break; // IP itself
nixnax 29:30de79d658f6 886 default:
nixnax 29:30de79d658f6 887 discardedFrame();
nixnax 9:0992486d4a30 888 }
nixnax 29:30de79d658f6 889 }
nixnax 9:0992486d4a30 890
nixnax 50:ad4e7c3c88e5 891 void wait_for_HDLC_frame()
nixnax 50:ad4e7c3c88e5 892 {
nixnax 85:53e57ff1cf05 893 while(1) {
nixnax 85:53e57ff1cf05 894 fillbuf();
nixnax 81:9ede60e9a2c8 895 if ( rxbufNotEmpty() ) {
nixnax 81:9ede60e9a2c8 896 int oldTail = ppp.rx.tail; // remember where the character is located in the buffer
nixnax 81:9ede60e9a2c8 897 int rx = pc_getBuf(); // get the character
nixnax 50:ad4e7c3c88e5 898 if (rx==FRAME_7E) {
nixnax 81:9ede60e9a2c8 899 if (ppp.hdlc.frameFound == 0) { // we are still waiting for a frame start
nixnax 81:9ede60e9a2c8 900 ppp.hdlc.frameFound = 1; // we found our first frame start
nixnax 81:9ede60e9a2c8 901 ppp.hdlc.frameStartIndex=ppp.rx.tail; // remember where the frame character is in the buffer
nixnax 51:a86d56844324 902 } else {
nixnax 81:9ede60e9a2c8 903 // we have previously found a frame start
nixnax 81:9ede60e9a2c8 904 ppp.hdlc.frameEndIndex=oldTail; // mark the frame end character
nixnax 81:9ede60e9a2c8 905 processHDLCFrame(ppp.hdlc.frameStartIndex, ppp.hdlc.frameEndIndex); // process the frame
nixnax 81:9ede60e9a2c8 906 ppp.hdlc.frameStartIndex = ppp.rx.tail; // where next frame will start
nixnax 81:9ede60e9a2c8 907 break;
nixnax 50:ad4e7c3c88e5 908 }
nixnax 50:ad4e7c3c88e5 909 }
nixnax 50:ad4e7c3c88e5 910 }
nixnax 85:53e57ff1cf05 911 }
nixnax 50:ad4e7c3c88e5 912 }
nixnax 50:ad4e7c3c88e5 913
nixnax 29:30de79d658f6 914 void scanForConnectString()
nixnax 29:30de79d658f6 915 {
nixnax 81:9ede60e9a2c8 916 while(ppp.online == 0) {
nixnax 85:53e57ff1cf05 917 fillbuf();
nixnax 81:9ede60e9a2c8 918 // search for Windows Dialup Networking "Direct Connection Between Two Computers" expected connect string
nixnax 81:9ede60e9a2c8 919 char * found1 = strstr( (char *)ppp.rx.buf, "CLIENTCLIENT" );
nixnax 81:9ede60e9a2c8 920 // also search for HDLC frame start character 0x7e
nixnax 81:9ede60e9a2c8 921 void * found2 = memchr( (char *)ppp.rx.buf, 0x7e, RXBUFLEN );
nixnax 81:9ede60e9a2c8 922 if( (found1 != NULL) | (found2 != NULL) ) {
nixnax 81:9ede60e9a2c8 923 if (found1 != NULL) {
nixnax 82:051f77f7dd72 924 memset(ppp.rx.buf, 0x20, RXBUFLEN); // clear the receive buffer
nixnax 81:9ede60e9a2c8 925 // respond with Windows Dialup networking expected "Direct Connection Between Two Computers" response string
nixnax 81:9ede60e9a2c8 926 pc.puts("CLIENTSERVER");
nixnax 81:9ede60e9a2c8 927 if (v0) debug("Found connect string \"CLIENTCLIENT\"\n");
nixnax 81:9ede60e9a2c8 928 }
nixnax 81:9ede60e9a2c8 929 if (found2 != NULL) {
nixnax 81:9ede60e9a2c8 930 if (v0) debug("Found HDLC frame start (7E)\n");
nixnax 81:9ede60e9a2c8 931 }
nixnax 71:965619fedb3a 932 ppp.online=1; // we are connected, so stop looking for the string
nixnax 9:0992486d4a30 933 }
nixnax 9:0992486d4a30 934 }
nixnax 81:9ede60e9a2c8 935
nixnax 9:0992486d4a30 936 }
nixnax 9:0992486d4a30 937
nixnax 0:2cf4880c312a 938 int main()
nixnax 0:2cf4880c312a 939 {
nixnax 14:c65831c25aaa 940 pc.baud(115200); // USB virtual serial port
nixnax 41:e58a5a09f411 941 #ifndef SERIAL_PORT_MONITOR_NO
nixnax 49:2213f9c132b2 942 xx.baud(115200); // second serial port for debug messages
nixnax 9:0992486d4a30 943 xx.puts("\x1b[2J\x1b[HReady\n"); // VT100 code for clear screen & home
nixnax 41:e58a5a09f411 944 #endif
nixnax 9:0992486d4a30 945 pppInitStruct(); // initialize all the PPP properties
nixnax 81:9ede60e9a2c8 946 ppp.seq=1000; // initial TCP sequence number
nixnax 81:9ede60e9a2c8 947
nixnax 0:2cf4880c312a 948 while(1) {
nixnax 51:a86d56844324 949 scanForConnectString(); // respond to connect command from windows dial up networking
nixnax 81:9ede60e9a2c8 950 while(ppp.online) {
nixnax 81:9ede60e9a2c8 951 wait_for_HDLC_frame();
nixnax 81:9ede60e9a2c8 952 }
nixnax 7:ab147f5e97ac 953 }
nixnax 7:ab147f5e97ac 954 }