Diff: nexpaq_mdk_src/nexpaq_mdk.h

Revision:

5:9b5534e46d30

Parent:

4:494741f7f5b2

Child:

6:7b51d2ebef23

--- a/nexpaq_mdk_src/nexpaq_mdk.h	Mon Sep 19 14:21:15 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,112 +0,0 @@
-/*
- * np_module_mdk_v1.h
- *	developer call the API of MDK by the include file.
- *  Created on: July 14, 2016
- *      Author: Alan.Lin
- *
- *  Copyright: NexPack Ltd.
- */
-
-#ifndef NP_MODULE_MDK_V1_H_
-#define NP_MODULE_MDK_V1_H_
-
-#include <stdint.h>
-
-#ifdef __cplusplus
-	extern "C" {
-#endif
-
-typedef void (*my_VOID_UCUC)(uint8_t*, uint8_t);
-typedef void (*app_function)(void);
-
-typedef struct {
-	uint16_t	 	command;
-	my_VOID_UCUC	function;
-} MDK_REGISTER_CMD;
-
-#define MDK_REGISTER_SUCCESS	0x00
-#define MDK_REGISTER_FAILD		0x01
-
-void delay_ms(uint32_t t_ms);
-/*
- * Description: API to make the app initial by the api
- * Parameter: np_app_setup-the initial function of APP
- * Return: null
- */
-void np_api_setup(app_function np_app_setup);
-
-/*
- * Description: initialize mdk
- * Parameter: null
- * Return: null
- */
-void np_api_init();
-
-/*
- * Description: signal ready to start
- * Parameter: null
- * Return: null
- */
-void np_api_start();
-
-/*
- * Description: check for bootloader request
- * Parameter: null
- * Return: null
- */
-void np_api_bsl_chk();
-
-/*
- * Description: API to run the loop function of APP, "np_app_loop()" will run on while(1),running forever when software on app mode
- * Parameter: np_app_loop-the loop function of APP
- * Return: null
- */
-void np_api_loop(app_function np_app_loop);
-
-/*
- * Description: API to set app firmware version
- * Parameter: null
- * Return: null
- */
-void np_api_set_app_version(uint8_t HV, uint8_t MV, uint8_t LV);
-/*
- * Description: API to register developer's command callback function
- * Parameter  : 
- * 		cmd_func_table:the callback function about the command. 
- *			  		   The callback function will be called when MDK get the corresponding command. 
- *		num           :The callback function number
- * Return     : 0-success;  1-fail
- */
-uint8_t np_api_register(MDK_REGISTER_CMD* cmd_func_table, uint8_t num);
-
-/*
- * Description: API to upload data to Phone
- * Parameter: 
- *		rcmd : The command of the message.
- *		pData: Pointer of the space for hold the parameter of the message.
- *		pLen : The length of the "pData"
- * Return    : 0-success;  1-fail
- */
-uint8_t np_api_upload(uint16_t rcmd,uint8_t *pData, uint8_t pLen);
-
-/*
- * Description: API to upload data to Gateway
- *		rcmd : The command of the message.
- *		pData: Pointer of the space for hold the parameter of the message.
- *		pLen : The length of the "pData"
- * Return    : 0-success;  1-fail
- */
-uint8_t np_api_upload_to_station(uint16_t rcmd, uint8_t *pData, uint8_t pLen);
-
-/*
- * Description: API to set a manually output address for next POST message
- * Parameter: address-the source address of next message
- * Return: null
- */
-void np_api_set_post_address(uint8_t address);
-
-#ifdef __cplusplus
-	}
-#endif
-
-#endif /* NP_MODULE_MDK_V1_H_ */