File content as of revision 0:abc480f8eeab:

/* MAX17048 Driver Library
 * Copyright (c) 2013 Neil Thiessen
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef MAX17048_H
#define MAX17048_H

#include "mbed.h"

//i2c address definition
#define __MAX17048_ADDR             (0x36 << 1)

//i2c register definitions
#define __MAX17048_REG_VCELL        0x02
#define __MAX17048_REG_SOC          0x04
#define __MAX17048_REG_MODE         0x06
#define __MAX17048_REG_VERSION      0x08
#define __MAX17048_REG_HIBRT        0x0A
#define __MAX17048_REG_CONFIG       0x0C
#define __MAX17048_REG_VALRT        0x14
#define __MAX17048_REG_CRATE        0x16
#define __MAX17048_REG_VRESET_ID    0x18
#define __MAX17048_REG_STATUS       0x1A
#define __MAX17048_REG_TABLE        0x40
#define __MAX17048_REG_CMD          0xFE

//RCOMP0 value definition
#define __MAX17048_RCOMP0           0x97

/** MAX17048 class.
 *  Used for controlling a MAX17048 fuel gauge connected via I2C.
 *
 * Example:
 * @code
 * #include "mbed.h"
 * #include "MAX17048.h"
 *
 * Serial pc(USBTX, USBRX);
 * MAX17048 gauge(p28, p27);
 *
 * int main() {
 *     while (1) {
 *         //Read the cell voltage
 *         float vcell = gauge.getVcell();
 *
 *         //Print the cell voltage
 *         pc.printf("Vcell = %f\n", vcell);
 *
 *         //Sleep for 0.5 seconds
 *         wait(0.5);
 *     }
 * }
 * @endcode
 */
class MAX17048
{
public:
    /** Represents the different alert flags for the MAX17048
     */
    enum AlertFlags {
        ALERT_RI = (1 << 0),  /**< Reset indicator */
        ALERT_VH = (1 << 1),  /**< Voltage high alert */
        ALERT_VL = (1 << 2),  /**< Voltage low alert */
        ALERT_VR = (1 << 3),  /**< Voltage reset alert */
        ALERT_HD = (1 << 4),  /**< SOC low alert */
        ALERT_SC = (1 << 5)   /**< SOC change alert */
    };

    /** Create a MAX17048 object connected to the specified I2C pins
     *
     * @param sda I2C data pin
     * @param scl I2C clock pin
     */
    MAX17048(PinName sda, PinName scl);

    /** Command the MAX17048 to perform a power-on reset
     */
    void reset(void);

    /** Command the MAX17048 to perform a QuickStart
     */
    void quickStart(void);

    /** Determine whether sleep mode is enabled on the MAX17048
    *
    * @returns
    *   'true' if sleep mode is enabled,
    *   'false' if sleep mode is disabled.
    */
    bool isSleepEnabled(void);

    /** Enable or disable sleep mode on the MAX17048
     *
     * @param enabled Whether or not sleep mode is enabled.
     */
    void setSleepEnabled(bool enabled);
    
    /** Determine whether or not the MAX17048 is hibernating
    *
    * @returns
    *   'true' if hibernating,
    *   'false' if not hibernating.
    */
    bool isHibernating(void);
    
    /** Get the current hibernate threshold of the MAX17048
    *
    * @returns The current hibernate threshold in \%/hr.
    */
    float getHibernateThreshold(void);
    
    /** Set the hibernate threshold of the MAX17048
     *
     * @param threshold The new hibernate threshold in \%/hr.
     */
    void setHibernateThreshold(float threshold);
    
    /** Get the current active threshold of the MAX17048
    *
    * @returns The current active threshold in volts.
    */
    float getActiveThreshold(void);
    
    /** Set the active threshold of the MAX17048
     *
     * @param threshold The new active threshold in volts.
     */
    void setActiveThreshold(float threshold);
    
    /** Get the production version of the MAX17048
    *
    * @returns The 16-bit production version.
    */
    unsigned short getVersion(void);
    
    /** Set the cell temperature compensation of the MAX17048
     *
     * @param temp The current cell temperature in °C.
     */
    void setTempCompensation(float temp);
    
    /** Determine whether or not the MAX17048 is in sleep mode
    *
    * @returns
    *   'true' if in sleep mode,
    *   'false' if not in sleep mode.
    */
    bool isSleeping(void);
    
    /** Enter or exit sleep mode on the MAX17048 (sleep mode must be enabled first)
     *
     * @param sleep Whether or not to sleep.
     */
    void setSleep(bool sleep);
    
    /** Determine whether or not the SOC 1% change alert is enabled on the MAX17048
    *
    * @returns
    *   'true' if enabled,
    *   'false' if not enabled.
    */
    bool isSOCChangeAlertEnabled(void);
    
    /** Enable or disable the SOC 1% change alert on the MAX17048
     *
     * @param enabled Whether or the SOC 1% change alert is enabled.
     */
    void setSOCChangeAlertEnabled(bool enabled);
    
    /** Determine whether or not the MAX17048 is asserting the ALRT pin
    *
    * @returns
    *   'true' if alerting,
    *   'false' if not alerting.
    */
    bool isAlerting(void);
    
    /** Command the MAX17048 to de-assert the ALRT pin
    */
    void clearAlert(void);
    
    /** Get the current SOC empty alert threshold of the MAX17048
    *
    * @returns The current SOC empty alert threshold in %.
    */
    char getEmptyAlertThreshold(void);
    
    /** Set the SOC empty alert threshold of the MAX17048
     *
     * @param threshold The new SOC empty alert threshold in %.
     */
    void setEmptyAlertThreshold(char threshold);
    
    /** Get the current low voltage alert threshold of the MAX17048
    *
    * @returns The current low voltage alert threshold in volts.
    */
    float getVAlertMinThreshold(void);
    
    /** Set the low voltage alert threshold of the MAX17048
     *
     * @param threshold The new low voltage alert threshold in volts.
     */
    void setVAlertMinThreshold(float threshold);
    
    /** Get the current high voltage alert threshold of the MAX17048
    *
    * @returns The current high voltage alert threshold in volts.
    */
    float getVAlertMaxThreshold(void);
    
    /** Set the high voltage alert threshold of the MAX17048
     *
     * @param threshold The new high voltage alert threshold in volts.
     */
    void setVAlertMaxThreshold(float threshold);
    
    /** Get the current reset voltage threshold of the MAX17048
    *
    * @returns The current reset voltage threshold in volts.
    */
    float getVResetThreshold(void);
    
    /** Set the reset voltage threshold of the MAX17048
     *
     * @param threshold The new reset voltage threshold in volts.
     */
    void setVResetThreshold(float threshold);
    
    /** Determine whether or not the reset voltage comparator is enabled on the MAX17048
    *
    * @returns
    *   'true' if enabled,
    *   'false' if not enabled.
    */
    bool isComparatorEnabled(void);
    
    /** Enable or disable the reset voltage comparator on the MAX17048
     *
     * @param enabled Whether or not the reset voltage comparator is enabled.
     */
    void setComparatorEnabled(bool enabled);
    
    /** Get the factory programmed 8-bit ID of the MAX17048
    *
    * @returns The 8-bit ID.
    */
    char getID(void);
    
    /** Determine whether or not the voltage reset alert is enabled on the MAX17048
    *
    * @returns
    *   'true' if enabled,
    *   'false' if not enabled.
    */
    bool isVResetAlertEnabled(void);
    
    /** Enable or disable the voltage reset alert on the MAX17048
     *
     * @param enabled Whether or the voltage reset alert is enabled.
     */
    void setVResetAlertEnabled(bool enabled);
    
    /** Get the current alert flags on the MAX17048
    *
    * @returns The current alert flags as AlertFlags enum values OR'd together.
    */
    char getAlertFlags(void);
    
    /** Clear the specified alert flags on the MAX17048
     *
     * @param flags The alert flags to clear as AlertFlags enum values OR'd together.
     */
    void clearAlertFlags(char flags);

    /** Get the current cell voltage measurement of the MAX17048
    *
    * @returns The cell voltage measurement as a float.
    */
    float getVcell(void);

    /** Get the current state of charge measurement of the MAX17048
     *
     * @returns The state of charge measurement as a float.
     */
    float getSOC(void);

    /** Get the current C rate measurement of the MAX17048
     *
     * @returns The C rate measurement as a float.
     */
    float getCRate(void);

private:
    I2C _i2c;
    unsigned short _read(char reg);
    void _write(char reg, unsigned short data);
    void _writeRCOMP(char rcomp);
};

#endif