Diff: main.cpp

Revision:

14:efd42910791b

Parent:

13:26905142e97b

Child:

15:ac15ec676d87

--- a/main.cpp	Sun Oct 19 07:05:29 2014 +0000
+++ b/main.cpp	Mon Oct 20 06:58:24 2014 +0000
@@ -1,18 +1,18 @@
 /**
-*  \brief CS294-84 demo
-*  \author Ben Zhang, Antonio Iannopollo
-*
-* This sampel code illustrates how to connect the mbed KL25Z platform to internet
-* thorugh the CC3000 wifi breakout board (http://www.adafruit.com/product/1469).
-* Connections between the KL25Z and the CC3000 are made according to the
-* guide at https://learn.adafruit.com/adafruit-cc3000-wifi -- KL25Z and arduino
-* UNO are pin to pin compatible --
-*
-* This application uses the following libraries:
-* - cc3000_hostdriver_mbedsocket
-*   (http://developer.mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/)
-* - HTTPClient (http://developer.mbed.org/users/donatien/code/HTTPClient/)
-*/
+ *  \brief CS294-84 demo
+ *  \author Ben Zhang, Antonio Iannopollo
+ *
+ * This sampel code illustrates how to connect the mbed KL25Z platform to internet
+ * thorugh the CC3000 wifi breakout board (http://www.adafruit.com/product/1469).
+ * Connections between the KL25Z and the CC3000 are made according to the
+ * guide at https://learn.adafruit.com/adafruit-cc3000-wifi -- KL25Z and arduino
+ * UNO are pin to pin compatible --
+ *
+ * This application uses the following libraries:
+ * - cc3000_hostdriver_mbedsocket
+ *   (http://developer.mbed.org/users/Kojto/code/cc3000_hostdriver_mbedsocket/)
+ * - HTTPClient (http://developer.mbed.org/users/donatien/code/HTTPClient/)
+ */
 
 #include "mbed.h"
 #include "cc3000.h"
@@ -27,13 +27,15 @@
 // - SPI MISO => (pin D12)
 // - SPI CLK  => (pin D13)
 // plus wifi network SSID, password, security level and smart-configuration flag.
-mbed_cc3000::cc3000 wifi(D3, D5, D10, SPI(D11, D12, D13), "SSID", "PASSWORD", WPA2, false);
+mbed_cc3000::cc3000 wifi(D3, D5, D10, SPI(D11, D12, D13),
+                                                 "EECS-PSK", "Thequickbrown", WPA2, false);
 
 // create an http instance
 HTTPClient http;
 
 // str is used to hold the response data
 char str[512];
+char url[80];
 
 // setup the serial connection, and LEDs
 Serial pc(USBTX, USBRX);
@@ -55,24 +57,31 @@
         if(wifi.is_connected() == false) {
             // try to connect
             if (wifi.connect() == -1) {
-                printf("Failed to connect. Please verify connection details and try again. \r\n");
+                pc.printf("Failed to connect."
+                             "Please verify connection details and try again. \r\n");
             } else {
-                printf("IP address: %s \r\n", wifi.getIPAddress());
+                pc.printf("IP address: %s \r\n", wifi.getIPAddress());
 
                 //once connected, turn green LED on and red LED off
                 led_red = 1;
                 led_green = 0;
             }
         } else {
-            int ret = http.get("http://www.eecs.berkeley.edu/~benzh/hello.txt", str, 128);
+            // get input url and then return the value
+            pc.printf("> ");
+            pc.scanf("%s", url);
+
+            int ret = http.get(url, str, 128);
             if (!ret) {
-                printf("Page fetched successfully - read %d characters\r\n", strlen(str));
-                printf("Result: %s\r\n", str);
+                pc.printf("Requested %s\r\n", url);
+                pc.printf("Page fetched successfully - read %d characters\r\n",
+                                    strlen(str));
+                pc.printf("Result: %s\r\n", str);
             } else {
-                printf("Error - ret = %d - HTTP return code = %d\r\n", ret, http.getHTTPResponseCode());
+                pc.printf("Error - ret = %d - HTTP return code = %d\r\n",
+                                    ret,
+                                    http.getHTTPResponseCode());
             }
         }
-        // repeat after waiting for 1 sec
-        wait(1.0);
     }
-}
\ No newline at end of file
+}