Diff: main.cpp

Revision:

1:8138a268fbd2

Parent:

0:b72d22e10709

--- a/main.cpp	Thu May 08 03:57:58 2014 +0000
+++ b/main.cpp	Fri May 09 01:17:51 2014 +0000
@@ -7,54 +7,70 @@
 #include "WIZnetInterface.h"
 
 #define ECHO_SERVER_PORT   5000
-const char* ECHO_SERVER_ADDRESS = "192.168.1.229";
+const char* ECHO_SERVER_ADDRESS = "192.168.1.229";  // Server IP address
 
+/** 
+* Setting DHCP or static
+*/
+//#define USE_DHCP
+
+/** 
+* Setting the platform to test
+*/
 #define LPC
 //#define ST_NUCLEO
-
-// Setting Seial setting
-//Serial pc(P1_13, P1_14); // tx, rx
-//Serial pc(PA_2, PA_3); // tx, rx
-
-#define TCP_Server
-//#define TCP_Client
-//#define UDP_Server
-//#define UDP_Client
+//#define FRDM_KL25Z
+//#define Seeeduino_Arch
 
 #ifdef LPC
 // LPC1768 & LPC11U24
 SPI spi(p5, p6, p7); // mosi, miso, sclk
 WIZnetInterface eth(&spi, p8, p9); // spi, cs, reset
-Serial pc(USBTX,USBRX);
 #endif
 
 #ifdef ST_NUCLEO
 // ST Nucleo
 SPI spi(PA_7, PA_6, PA_5); // mosi, miso, sclk
 WIZnetInterface eth(&spi, PB_6, PA_10); // spi, cs, reset
-Serial pc(USBTX,USBRX);
+#endif
+
+#ifdef FRDM_KL25Z
+// Freescale FRDM KL25Z
+SPI spi(PTD2, PTD3, PTD1); // mosi, miso, sclk
+WIZnetInterface eth(&spi, PTD0, PTA20); // spi, cs, reset
 #endif
 
+#ifdef Seeeduino_Arch
 // Seeedstudio Arch
-//SPI spi(P1_22, P1_21, P1_20); // mosi, miso, sclk
-//WIZnetInterface eth(&spi, P0_2, P0_0); // spi, cs, reset
+SPI spi(P1_22, P1_21, P1_20); // mosi, miso, sclk
+WIZnetInterface eth(&spi, P0_2, P0_0); // spi, cs, reset
+    Serial pc(P1_13, P1_14); // tx, rx
+#else
+    Serial pc(USBTX,USBRX);
+#endif
 
-// Freescale FRDM KL25Z
-//SPI spi(PTD2, PTD3, PTD1); // mosi, miso, sclk
-//WIZnetInterface eth(&spi, PTD0, PTA20); // spi, cs, reset
-//Serial pc(USBTX,USBRX);
-
+#ifndef USE_DHCP
+// for static IP setting
 const char * IP_Addr    = "192.168.1.120";
 const char * IP_Subnet  = "255.255.255.0";
 const char * IP_Gateway = "192.168.1.111";
+#endif
 
 
 int main()
 {
+    uint8_t mac[6];
+    
+    mbed_mac_address((char *)mac);     // using the MAC address in LPC11U24 or LPC1178
+//    mac[0] = 0x00; mac[1] = 0x08; mac[2] = 0xDC; mac[3] = 0x00; mac[4] = 0x00; mac[5] = 0x00; 
+// you can alo use WIZ550io's MAC address by enabling "USE_WIZ550IO_MAC" in wiznet.h
+    
     pc.printf("Start\n");
-
-//    int ret = eth.init(); //Use DHCP
-    int ret = eth.init(IP_Addr, IP_Subnet, IP_Gateway); // static
+    #ifdef USE_DHCP
+      int ret = eth.init(mac); //Use DHCP
+    #else
+      int ret = eth.init(mac, IP_Addr, IP_Subnet, IP_Gateway); // static
+    #endif
 
     if (!ret) {
         pc.printf("Initialized, MAC: %s\n", eth.getMACAddress());
@@ -72,8 +88,6 @@
         return -1;
     }
 
-
-#ifdef TCP_Server
     TCPSocketServer server;
     server.bind(ECHO_SERVER_PORT);
     server.listen();
@@ -96,100 +110,4 @@
 
         client.close();
     }
-#endif
-
-#ifdef TCP_Client
-    TCPSocketConnection socket;
-    while (socket.connect(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT) < 0) {
-        printf("Unable to connect to (%s) on port (%d)\n", ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT);
-        wait(1);
-    }
-
-    char hello[] = "Hello World\n";
-    socket.send_all(hello, sizeof(hello) - 1);
-
-    char buf[256];
-    int n = socket.receive(buf, 256);
-    buf[n] = '\0';
-    printf("%s", buf);
-
-    socket.close();
-    eth.disconnect();
-
-    while(true) {}
-#endif
-
-
-#ifdef UDP_Server
-    UDPSocket server;
-    ret = server.bind(ECHO_SERVER_PORT);
-    printf("sock.bind = %d\n", ret);
-
-    Endpoint client;
-    char buffer[256];
-    while (true) {
-        printf("\nWait for packet...\n");
-        int n = server.receiveFrom(client, buffer, sizeof(buffer));
-
-        printf("Received packet from: %s\n", client.get_address());
-        server.sendTo(client, buffer, n);
-    }
-#endif
-
-#ifdef UDP_Client
-    UDPSocket sock;
-    ret = sock.init();
-    sock.bind(0);
-    printf("sock.bind = %d\n", ret);
-    if (ret == -1) printf("Socket creation Fail\n");
-
-    Endpoint echo_server;
-    echo_server.set_address(ECHO_SERVER_ADDRESS, ECHO_SERVER_PORT);
-
-    printf("\nSend UDP data\n");
-
-    char out_buffer[] = "Hello World\n";
-    ret = sock.sendTo(echo_server, out_buffer, sizeof(out_buffer));
-    if (ret < 0) printf("UDP Send Error\n");
-    else printf("UDP Send: %d\n", ret);
-
-    char in_buffer[256];
-    int n = sock.receiveFrom(echo_server, in_buffer, sizeof(in_buffer));
-
-    in_buffer[n] = '\0';
-    printf("%s\n", in_buffer);
-
-    sock.close();
-
-    eth.disconnect();
-    while(1) {}
-#endif
-
-#ifdef NTP
-// NTP
-    time_t ctTime;
-    ctTime = time(NULL);
-    printf("1. Current Time is: %s\r\n", ctime(&ctTime));
-
-    printf("Trying to update time...\r\n");
-    if (ntp.setTime("0.pool.ntp.org") == 0) {
-        ctTime = time(NULL);
-        printf("2. Current Time is: %s\r\n", ctime(&ctTime));
-
-        // resetting GMT+9
-        set_time( time(NULL) + 32400 ); // 9x60x60
-        //
-        printf("Set time successfully\r\n");
-        //time_t ctTime;
-        ctTime = time(NULL);
-        printf("Time is set to (UTC): %s\r\n", ctime(&ctTime));
-    } else {
-        printf("Error\r\n");
-    }
-
-    eth.disconnect();
-
-    while(1) {
-    }
-#endif
 }