Tobias Naegeli / Mbed 2 deprecated AIT_UWB_Range

Tobi's ubw test branch

Dependencies:   mavlink_bridge mbed

Fork of AIT_UWB_Range by Benjamin Hepp

DW1000/DW1000.cpp@20:257d56530ae1, 2014-11-25 (annotated)

Committer:
manumaet
Date:
Tue Nov 25 15:22:53 2014 +0000
Revision:
20:257d56530ae1
Parent:
19:e94bc88c1eb0
Child:
21:23bf4399020d
minor changes to API, before implementing autoack and timing try

Who changed what in which revision?

UserRevisionLine numberNew contents of line
manumaet 0:f50e671ffff7 1 #include "DW1000.h"
manumaet 0:f50e671ffff7 2
manumaet 20:257d56530ae1 3 DW1000::DW1000(PinName MOSI, PinName MISO, PinName SCLK, PinName CS, PinName IRQ) : irq(IRQ), spi(MOSI, MISO, SCLK), cs(CS) {
manumaet 20:257d56530ae1 4 receiving = false; // state in the beginning is not listening for frames
manumaet 20:257d56530ae1 5 sending = false; // state in the beginning is not sending anything
manumaet 17:8afa5f9122da 6
manumaet 0:f50e671ffff7 7 deselect(); // Chip must be deselected first
manumaet 0:f50e671ffff7 8 spi.format(8,0); // Setup the spi for standard 8 bit data and SPI-Mode 0 (GPIO5, GPIO6 open circuit or ground on DW1000)
manumaet 0:f50e671ffff7 9 spi.frequency(1000000); // with a 1MHz clock rate (worked up to 49MHz in our Test)
manumaet 7:e634eeafc4d2 10
manumaet 19:e94bc88c1eb0 11 resetAll(); // we can do a soft reset if we want to (only needed for debugging)
manumaet 12:985aa9843c3c 12 loadLDE(); // important everytime DW1000 initialises/awakes otherwise the LDE algorithm must be turned of or there's receiving malfunction see User Manual LDELOAD on p22 & p158
manumaet 18:bbc7ca7d3a95 13
manumaet 18:bbc7ca7d3a95 14 // Configuration TODO: make method for that
manumaet 12:985aa9843c3c 15 writeRegister8(DW1000_SYS_CFG, 3, 0x20); // enable auto reenabling receiver after error
manumaet 15:e1fea7e2aff1 16 writeRegister8(DW1000_SYS_CFG, 2, 0x03); // enable 1024 byte frames TODO: doesn't work!!
manumaet 11:c87d37db2c6f 17
manumaet 8:7a9c61242e2f 18 irq.rise(this, &DW1000::ISR); // attach Interrupt handler to rising edge
manumaet 0:f50e671ffff7 19 }
manumaet 0:f50e671ffff7 20
manumaet 0:f50e671ffff7 21 uint32_t DW1000::getDeviceID() {
manumaet 0:f50e671ffff7 22 uint32_t result;
manumaet 0:f50e671ffff7 23 readRegister(DW1000_DEV_ID, 0, (uint8_t*)&result, 4);
manumaet 0:f50e671ffff7 24 return result;
manumaet 0:f50e671ffff7 25 }
manumaet 0:f50e671ffff7 26
manumaet 0:f50e671ffff7 27 uint64_t DW1000::getEUI() {
manumaet 0:f50e671ffff7 28 uint64_t result;
manumaet 0:f50e671ffff7 29 readRegister(DW1000_EUI, 0, (uint8_t*)&result, 8);
manumaet 0:f50e671ffff7 30 return result;
manumaet 0:f50e671ffff7 31 }
manumaet 0:f50e671ffff7 32
manumaet 0:f50e671ffff7 33 void DW1000::setEUI(uint64_t EUI) {
manumaet 0:f50e671ffff7 34 writeRegister(DW1000_EUI, 0, (uint8_t*)&EUI, 8);
manumaet 0:f50e671ffff7 35 }
manumaet 0:f50e671ffff7 36
manumaet 0:f50e671ffff7 37 float DW1000::getVoltage() {
manumaet 12:985aa9843c3c 38 uint8_t buffer[7] = {0x80, 0x0A, 0x0F, 0x01, 0x00}; // algorithm form User Manual p57
manumaet 0:f50e671ffff7 39 writeRegister(DW1000_RF_CONF, 0x11, buffer, 2);
manumaet 0:f50e671ffff7 40 writeRegister(DW1000_RF_CONF, 0x12, &buffer[2], 1);
manumaet 0:f50e671ffff7 41 writeRegister(DW1000_TX_CAL, 0x00, &buffer[3], 1);
manumaet 0:f50e671ffff7 42 writeRegister(DW1000_TX_CAL, 0x00, &buffer[4], 1);
manumaet 8:7a9c61242e2f 43 readRegister(DW1000_TX_CAL, 0x03, &buffer[5], 2); // get the 8-Bit readings for Voltage and Temperature
manumaet 0:f50e671ffff7 44 float Voltage = buffer[5] * 0.0057 + 2.3;
manumaet 20:257d56530ae1 45 //float Temperature = buffer[6] * 1.13 - 113.0; // TODO: getTemperature was always ~35 degree with better formula/calibration see instance_common.c row 391
manumaet 0:f50e671ffff7 46 return Voltage;
manumaet 0:f50e671ffff7 47 }
manumaet 0:f50e671ffff7 48
manumaet 18:bbc7ca7d3a95 49 uint64_t DW1000::getStatus() {
manumaet 18:bbc7ca7d3a95 50 return readRegister40(DW1000_SYS_STATUS, 0);
manumaet 18:bbc7ca7d3a95 51 }
manumaet 18:bbc7ca7d3a95 52
manumaet 10:d077bb12d259 53 void DW1000::sendString(char* message) {
manumaet 10:d077bb12d259 54 sendFrame((uint8_t*)message, strlen(message)+1);
manumaet 10:d077bb12d259 55 }
manumaet 10:d077bb12d259 56
manumaet 10:d077bb12d259 57 char* DW1000::receiveString() {
manumaet 20:257d56530ae1 58 uint16_t framelength = getFramelength();
manumaet 20:257d56530ae1 59 char* receive = new char[framelength]; // prepare memory for the string on the heap
manumaet 20:257d56530ae1 60 readRegister(DW1000_RX_BUFFER, 0, (uint8_t*)receive, framelength); // get data from buffer
manumaet 10:d077bb12d259 61 return receive;
manumaet 10:d077bb12d259 62 }
manumaet 10:d077bb12d259 63
manumaet 11:c87d37db2c6f 64 void DW1000::sendFrame(uint8_t* message, uint16_t length) {
manumaet 20:257d56530ae1 65 if (length >= 1021) length = 1021; // check for maximim length a frame can have TODO: 127 Byte mode?
manumaet 13:b4d27bf7062a 66 writeRegister(DW1000_TX_BUFFER, 0, message, length); // fill buffer
manumaet 7:e634eeafc4d2 67
manumaet 13:b4d27bf7062a 68 uint8_t backup = readRegister8(DW1000_TX_FCTRL, 1); // put length of frame including 2 CRC Bytes
manumaet 13:b4d27bf7062a 69 length += 2;
manumaet 11:c87d37db2c6f 70 length = ((backup & 0xFC) << 8) | (length & 0x03FF);
manumaet 17:8afa5f9122da 71 writeRegister(DW1000_TX_FCTRL, 0, (uint8_t*)&length, 2);
manumaet 11:c87d37db2c6f 72
manumaet 18:bbc7ca7d3a95 73 if (receiving) stopTRX(); // stop receiving if we are in this state
manumaet 20:257d56530ae1 74 sending = true;
manumaet 11:c87d37db2c6f 75 writeRegister8(DW1000_SYS_CTRL, 0, 0x02); // trigger sending process by setting the TXSTRT bit
manumaet 8:7a9c61242e2f 76 }
manumaet 8:7a9c61242e2f 77
manumaet 17:8afa5f9122da 78 void DW1000::startRX() {
manumaet 20:257d56530ae1 79 while(sending); // block until sending finished TODO: the right way??
manumaet 17:8afa5f9122da 80 receiving = true;
manumaet 20:257d56530ae1 81 writeRegister8(DW1000_SYS_CTRL, 0x01, 0x01); // start listening for preamble by setting the RXENAB bit
manumaet 7:e634eeafc4d2 82 }
manumaet 7:e634eeafc4d2 83
manumaet 17:8afa5f9122da 84 void DW1000::stopRX() {
manumaet 17:8afa5f9122da 85 receiving = false;
manumaet 19:e94bc88c1eb0 86 stopTRX();
manumaet 17:8afa5f9122da 87 }
manumaet 17:8afa5f9122da 88
manumaet 20:257d56530ae1 89 // PRIVATE Methods ------------------------------------------------------------------------------------
manumaet 18:bbc7ca7d3a95 90 void DW1000::loadLDE() { // initialise LDE algorithm LDELOAD User Manual p22
manumaet 18:bbc7ca7d3a95 91 writeRegister16(DW1000_PMSC, 0, 0x0301); // set clock to XTAL so OTP is reliable
manumaet 20:257d56530ae1 92 writeRegister16(DW1000_OTP_IF, 0x06, 0x8000); // set LDELOAD bit in OTP
manumaet 12:985aa9843c3c 93 wait_us(150);
manumaet 18:bbc7ca7d3a95 94 writeRegister16(DW1000_PMSC, 0, 0x0200); // recover to PLL clock
manumaet 12:985aa9843c3c 95 }
manumaet 12:985aa9843c3c 96
manumaet 17:8afa5f9122da 97 void DW1000::stopTRX() {
manumaet 17:8afa5f9122da 98 writeRegister8(DW1000_SYS_CTRL, 0, 0x40); // disable tranceiver go back to idle mode
manumaet 17:8afa5f9122da 99 }
manumaet 17:8afa5f9122da 100
manumaet 12:985aa9843c3c 101 void DW1000::resetRX() {
manumaet 12:985aa9843c3c 102 writeRegister8(DW1000_PMSC, 3, 0xE0); // set RX reset
manumaet 12:985aa9843c3c 103 writeRegister8(DW1000_PMSC, 3, 0xF0); // clear RX reset
manumaet 12:985aa9843c3c 104 }
manumaet 12:985aa9843c3c 105
manumaet 12:985aa9843c3c 106 void DW1000::resetAll() {
manumaet 12:985aa9843c3c 107 writeRegister8(DW1000_PMSC, 0, 0x01); // set clock to XTAL
manumaet 12:985aa9843c3c 108 writeRegister8(DW1000_PMSC, 3, 0x00); // set All reset
manumaet 12:985aa9843c3c 109 wait_us(10); // wait for PLL to lock
manumaet 12:985aa9843c3c 110 writeRegister8(DW1000_PMSC, 3, 0xF0); // clear All reset
manumaet 7:e634eeafc4d2 111 }
manumaet 0:f50e671ffff7 112
manumaet 20:257d56530ae1 113 void DW1000::ISR() {
manumaet 20:257d56530ae1 114 uint64_t status = getStatus();
manumaet 20:257d56530ae1 115 if (status & 0x4000) {
manumaet 20:257d56530ae1 116 callbackRX(getFramelength());
manumaet 20:257d56530ae1 117 }
manumaet 20:257d56530ae1 118 if (status & 0x80) {
manumaet 20:257d56530ae1 119 sending = false;
manumaet 20:257d56530ae1 120 if (receiving) startRX(); // enable receiver again if we need to preserve state TODO: have to do it here??
manumaet 20:257d56530ae1 121 callbackTX();
manumaet 20:257d56530ae1 122 }
manumaet 20:257d56530ae1 123 }
manumaet 20:257d56530ae1 124
manumaet 20:257d56530ae1 125 uint16_t DW1000::getFramelength() {
manumaet 20:257d56530ae1 126 uint16_t framelength = readRegister16(DW1000_RX_FINFO, 0); // get framelength
manumaet 20:257d56530ae1 127 framelength = (framelength & 0x03FF) - 2; // take only the right bits and subtract the 2 CRC Bytes
manumaet 20:257d56530ae1 128 return framelength;
manumaet 20:257d56530ae1 129 }
manumaet 20:257d56530ae1 130
manumaet 0:f50e671ffff7 131 // SPI Interface ------------------------------------------------------------------------------------
manumaet 10:d077bb12d259 132 uint8_t DW1000::readRegister8(uint8_t reg, uint16_t subaddress) {
manumaet 10:d077bb12d259 133 uint8_t result;
manumaet 10:d077bb12d259 134 readRegister(reg, subaddress, &result, 1);
manumaet 10:d077bb12d259 135 return result;
manumaet 10:d077bb12d259 136 }
manumaet 10:d077bb12d259 137
manumaet 18:bbc7ca7d3a95 138 uint16_t DW1000::readRegister16(uint8_t reg, uint16_t subaddress) {
manumaet 18:bbc7ca7d3a95 139 uint16_t result;
manumaet 18:bbc7ca7d3a95 140 readRegister(reg, subaddress, (uint8_t*)&result, 2);
manumaet 18:bbc7ca7d3a95 141 return result;
manumaet 18:bbc7ca7d3a95 142 }
manumaet 18:bbc7ca7d3a95 143
manumaet 18:bbc7ca7d3a95 144 uint64_t DW1000::readRegister40(uint8_t reg, uint16_t subaddress) {
manumaet 18:bbc7ca7d3a95 145 uint64_t result;
manumaet 18:bbc7ca7d3a95 146 readRegister(reg, subaddress, (uint8_t*)&result, 5);
manumaet 18:bbc7ca7d3a95 147 result &= 0xFFFFFFFFFF; // only 40-Bit
manumaet 18:bbc7ca7d3a95 148 return result;
manumaet 18:bbc7ca7d3a95 149 }
manumaet 18:bbc7ca7d3a95 150
manumaet 8:7a9c61242e2f 151 void DW1000::writeRegister8(uint8_t reg, uint16_t subaddress, uint8_t buffer) {
manumaet 8:7a9c61242e2f 152 writeRegister(reg, subaddress, &buffer, 1);
manumaet 8:7a9c61242e2f 153 }
manumaet 8:7a9c61242e2f 154
manumaet 18:bbc7ca7d3a95 155 void DW1000::writeRegister16(uint8_t reg, uint16_t subaddress, uint16_t buffer) {
manumaet 18:bbc7ca7d3a95 156 writeRegister(reg, subaddress, (uint8_t*)&buffer, 2);
manumaet 18:bbc7ca7d3a95 157 }
manumaet 18:bbc7ca7d3a95 158
manumaet 8:7a9c61242e2f 159 void DW1000::readRegister(uint8_t reg, uint16_t subaddress, uint8_t *buffer, int length) {
manumaet 0:f50e671ffff7 160 setupTransaction(reg, subaddress, false);
manumaet 18:bbc7ca7d3a95 161 for(int i=0; i<length; i++) // get data
manumaet 0:f50e671ffff7 162 buffer[i] = spi.write(0x00);
manumaet 0:f50e671ffff7 163 deselect();
manumaet 0:f50e671ffff7 164 }
manumaet 0:f50e671ffff7 165
manumaet 8:7a9c61242e2f 166 void DW1000::writeRegister(uint8_t reg, uint16_t subaddress, uint8_t *buffer, int length) {
manumaet 0:f50e671ffff7 167 setupTransaction(reg, subaddress, true);
manumaet 18:bbc7ca7d3a95 168 for(int i=0; i<length; i++) // put data
manumaet 0:f50e671ffff7 169 spi.write(buffer[i]);
manumaet 0:f50e671ffff7 170 deselect();
manumaet 0:f50e671ffff7 171 }
manumaet 0:f50e671ffff7 172
manumaet 8:7a9c61242e2f 173 void DW1000::setupTransaction(uint8_t reg, uint16_t subaddress, bool write) {
manumaet 18:bbc7ca7d3a95 174 reg |= (write * DW1000_WRITE_FLAG); // set read/write flag
manumaet 0:f50e671ffff7 175 select();
manumaet 0:f50e671ffff7 176 if (subaddress > 0) { // there's a subadress, we need to set flag and send second header byte
manumaet 0:f50e671ffff7 177 spi.write(reg | DW1000_SUBADDRESS_FLAG);
manumaet 18:bbc7ca7d3a95 178 if (subaddress > 0x7F) { // sub address too long, we need to set flag and send third header byte
manumaet 18:bbc7ca7d3a95 179 spi.write((uint8_t)(subaddress & 0x7F) | DW1000_2_SUBADDRESS_FLAG); // and
manumaet 0:f50e671ffff7 180 spi.write((uint8_t)(subaddress >> 7));
manumaet 0:f50e671ffff7 181 } else {
manumaet 0:f50e671ffff7 182 spi.write((uint8_t)subaddress);
manumaet 0:f50e671ffff7 183 }
manumaet 0:f50e671ffff7 184 } else {
manumaet 18:bbc7ca7d3a95 185 spi.write(reg); // say which register address we want to access
manumaet 0:f50e671ffff7 186 }
manumaet 0:f50e671ffff7 187 }
manumaet 0:f50e671ffff7 188
manumaet 18:bbc7ca7d3a95 189 void DW1000::select() { cs = 0; } // set CS low to start transmission
manumaet 18:bbc7ca7d3a95 190 void DW1000::deselect() { cs = 1; } // set CS high to stop transmission