Diff: UbloxCellularDriverGen.h

Revision:

0:bb5fabac67ab

Child:

3:027c9eaec52c

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/UbloxCellularDriverGen.h	Mon Jun 05 13:00:31 2017 +0000
@@ -0,0 +1,269 @@
+/* Copyright (c) 2017 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef _UBLOX_CELLULAR_DRIVER_GEN_
+#define _UBLOX_CELLULAR_DRIVER_GEN_
+
+#include "ublox_modem_driver/UbloxCellularBase.h"
+
+/** UbloxCellularDriverGen class
+ * This interface provide SMS, USSD and
+ * module File System functionality.
+ */
+class UbloxCellularDriverGen: virtual public UbloxCellularBase {
+
+public:
+    /** Constructor.
+     *
+     * @param tx       the UART TX data pin to which the modem is attached.
+     * @param rx       the UART RX data pin to which the modem is attached.
+     * @param baud     the UART baud rate.
+     * @param debugOn  true to switch AT interface debug on, otherwise false.
+     */
+    UbloxCellularDriverGen(PinName tx = MDMTXD, PinName rx = MDMRXD,
+                           int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
+                           bool debugOn = false);
+
+    /* Destructor.
+     */
+    ~UbloxCellularDriverGen();
+
+    /**********************************************************************
+     * PUBLIC: Short Message Service
+     **********************************************************************/
+    
+    /** The size of an SMS storage buffer, including null terminator.
+     */
+    #define SMS_BUFFER_SIZE 145
+
+    /** Count the number of messages in the device and optionally return a
+     * list with indexes from the storage locations in the device.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param stat  what type of messages you can use:
+     *              "REC UNREAD", "REC READ", "STO UNSENT", "STO SENT", "ALL".
+     * @param index list where to save the storage positions (pointer
+     *              to an array of ints).
+     * @param num   number of elements that can be stored in the list.
+     * @return      the number of messages, this can be bigger than num,
+     *              -1 on failure.
+     */
+    int smsList(const char* stat = "ALL", int* index = NULL, int num = 0);
+    
+    /** Read a message from a storage position.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param index  the storage position to read.
+     * @param num    the originator address (16 chars including terminator).
+     * @param buf    a buffer where to save the short message.
+     * @param len    the length of buf.
+     * @return       true if successful, false otherwise.
+     */
+    bool smsRead(int index, char* num, char* buf, int len);
+    
+    /** Delete a message.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param index the storage position to delete.
+     * @return true if successful, false otherwise.
+     */
+    bool smsDelete(int index);
+    
+    /** Send a message to a recipient.
+     *
+     * Note: init() and nwk_registration() should be called before
+     * this method can be used.
+     *
+     * @param num the phone number of the recipient as a null terminated
+     *            string.  Note: no spaces are allowed in this string.
+     * @param buf the content of the message to sent, null terminated.
+     * @return    true if successful, false otherwise.
+     */
+    bool smsSend(const char* num, const char* buf);
+    
+    /**********************************************************************
+     * PUBLIC: Unstructured Supplementary Service Data
+     **********************************************************************/
+    
+    /** The maximum size of a USSD string (not including terminator).
+     */
+    #define USSD_STRING_LENGTH 128
+
+    /** Make a USSD query.
+     *
+     * Note: init() should be called before using this method can be
+     * used and, in many cases, nwk_registration() is also required as
+     * the USSD may need network access.
+     *
+     * Note: some USSD commands relate to call waiting, call forwarding,
+     * etc., which can result in multiple responses.  This function returns
+     * only the first response.  Instantiate this class with debugOn set to
+     * true to get a better view of what is really going on.  If such
+     * responses are important to you, you should subclass this class and
+     * parse for them specifically and, probably, use specific AT commands
+     * rather than USSD.
+     *
+     * @param cmd the USSD string to send e.g "*#100#".
+     * @param buf a buffer where to save the reply, which
+     *            will always be returned zero terminated.
+     * @param len the length of buf, set to USSD_STRING_LENGTH + 1 to
+     *            obtain the maximum length response plus terminator.
+     * @return    true if successful, false otherwise.
+     */
+    bool ussdCommand(const char* cmd, char* buf, int len);
+    
+    /**********************************************************************
+     * PUBLIC: Module File System
+     **********************************************************************/
+    
+    /** Delete a file from the module's local file system.  An attempt
+     * to delete a non-existent file will fail.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param filename the name of the file.
+     * @return         true if successful, false otherwise.
+     */
+    bool delFile(const char* filename);
+    
+    /** Write some data to a file in the module's local file system.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param  filename the name of the file.
+     * @param  buf the data to write.
+     * @param  len the size of the data to write.
+     * @return the number of bytes written.
+     */
+    int writeFile(const char* filename, const char* buf, int len);
+    
+    /** Read a file from the module's local file system.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param  filename the name of the file
+     * @param  buf a buffer to hold the data
+     * @param  len the size to read
+     * @return the number of bytes read
+    */
+    int readFile(const char* filename, char* buf, int len);
+    
+    /** Retrieve the file size from the module's local file system.
+     *
+     * Note: init() should be called before this method can be used.
+     *
+     * @param  filename the name of the file.
+     * @return the file size in bytes.
+     */
+    int fileSize(const char* filename);
+    
+protected:
+
+    /**********************************************************************
+     * PROTECTED: Short Message Service
+     **********************************************************************/
+
+    /** The number type for telephone numbers without a + on the front
+     */
+    #define TYPE_OF_ADDRESS_NATIONAL 129
+
+    /** The number type for telephone numbers with a + on the front
+     */
+    #define TYPE_OF_ADDRESS_INTERNATIONAL 145
+
+    /** Convert a #define to a string
+     */
+    #define stringify(a) str(a)
+    #define str(a) #a
+
+    /** Place to store the index of an SMS message.
+     */
+    int *_userSmsIndex;
+
+    /** The number of SMS message being returned to the user.
+     */
+    int _userSmsNum;
+
+    /** The number of SMS messages stored in the module.
+     */
+    int _smsCount;
+
+    /** Temporary storage for an SMS message.
+     */
+    char _smsBuf[SMS_BUFFER_SIZE];
+
+    /** URC for Short Message listing.
+     */
+    void CMGL_URC();
+
+    /** URC for new SMS messages.
+     */
+    void CMTI_URC();
+
+    /**********************************************************************
+     * PROTECTED: Unstructured Supplementary Service Data
+     **********************************************************************/
+
+    /** A buffer for the string assembled from the URC.
+     */
+    char * _ssUrcBuf;
+
+    /** URC for call waiting.
+     */
+    void CCWA_URC();
+
+    /** URC for call forwarding.
+     */
+    void CCFC_URC();
+
+    /** URC for calling lined ID restriction.
+     */
+    void CLIR_URC();
+
+    /** URC for calling lined ID presentation.
+     */
+    void CLIP_URC();
+
+    /** URC for connected lined ID restriction.
+     */
+    void COLR_URC();
+
+    /** URC for connected lined ID presentation.
+     */
+    void COLP_URC();
+
+    /**********************************************************************
+     * PROTECTED: File System
+     **********************************************************************/
+
+    /** The maximum size of a single read of file data.
+     * Note: this should be no larger than BUFFERED_SERIAL_RXBUF_SIZE
+     * (which defaults to 256) minus some margin for the AT command
+     * stuff that precedes it (which includes the filename).  A good
+     * number is 192.  If you want to use something bigger then add an
+     * entry to the target_overrides section of your mbed_app.json of the
+     * following form:
+     *
+     * "platform.buffered-serial-rxbuf-size": 1024
+     */
+
+    #define FILE_BUFFER_SIZE 192
+};
+
+#endif // _UBLOX_CELLULAR_DRIVER_GEN_
+