Thomas Moxon / Mbed OS MoxDes-mbed-os-BLE-USB-passthru

mbed OS V5 BLE UARTService to USB/UART PassThru Example

Moxon Design : mbed OS V5 BLE UartService to USBUART passthru example

This example will advertise on BLE as "BLART" and allow BLE serial echo to the USB Serial port. Open a Bluetooth terminal application, like Nordic "nRF UART" and connect to "BLART", open a terminal emulator program, like "TeraTERM", and connect to the USB COM Port (like JLink CDC UART Port), and echo characters back and forth. Set UART_LoopBack = 1 for local loopback (e.g. BLE to BLE, USB-UART to USB-UART)

Diff: README.md

Revision:
2:3e203cc2a88f
Parent:
0:2d1d68397ff7
--- a/README.md	Sat Apr 29 01:27:04 2017 +0000
+++ b/README.md	Sat Apr 29 01:32:11 2017 +0000
@@ -1,6 +1,6 @@
-# Getting started with Blinky on mbed OS
+# Moxon Design mbed OS V5 BLE UartService to USBUART passthru
 
-This guide reviews the steps required to get Blinky working on an mbed OS platform.
+This guide reviews the steps required to get BLU UART working on an mbed OS platform.
 
 Please install [mbed CLI](https://github.com/ARMmbed/mbed-cli#installing-mbed-cli).
 
@@ -9,8 +9,8 @@
 From the command-line, import the example:
 
 ```
-mbed import mbed-os-example-blinky
-cd mbed-os-example-blinky
+mbed import MoxDes-mbed-os-BLE-USB-passthru
+cd MoxDes-mbed-os-BLE-USB-passthru
 ```
 
 ### Now compile
@@ -18,31 +18,9 @@
 Invoke `mbed compile`, and specify the name of your platform and your favorite toolchain (`GCC_ARM`, `ARM`, `IAR`). For example, for the ARM Compiler 5:
 
 ```
-mbed compile -m K64F -t ARM
+mbed compile -m nRF42-DK -t ARM
 ```
 
-Your PC may take a few minutes to compile your code. At the end, you see the following result:
-
-```
-[snip]
-+----------------------------+-------+-------+------+
-| Module                     | .text | .data | .bss |
-+----------------------------+-------+-------+------+
-| Misc                       | 13939 |    24 | 1372 |
-| core/hal                   | 16993 |    96 |  296 |
-| core/rtos                  |  7384 |    92 | 4204 |
-| features/FEATURE_IPV4      |    80 |     0 |  176 |
-| frameworks/greentea-client |  1830 |    60 |   44 |
-| frameworks/utest           |  2392 |   512 |  292 |
-| Subtotals                  | 42618 |   784 | 6384 |
-+----------------------------+-------+-------+------+
-Allocated Heap: unknown
-Allocated Stack: unknown
-Total Static RAM memory (data + bss): 7168 bytes
-Total RAM memory (data + bss + heap + stack): 7168 bytes
-Total Flash memory (text + data + misc): 43402 bytes
-Image: .\.build\K64F\ARM\mbed-os-example-blinky.bin
-```
 
 ### Program your board
 
@@ -50,14 +28,14 @@
 1. Copy the binary file to the mbed device.
 1. Press the reset button to start the program.
 
-The LED on your platform turns on and off.
+The BLE device should advertise as "BLART" (BLe-uART)
 
 ## Export the project to Keil MDK, and debug your application
 
 From the command-line, run the following command:
 
 ```
-mbed export -m K64F -i uvision
+mbed export -m nRF42-DK -i uvision
 ```
 
 To debug the application: