fuyuno sakura
Hello world for lpclcd module https://strawberry-linux.com/catalog/items?code=12014
Program "lpclcd" sample via USB Bootloader using offline uVision toolchain(MDK)
NXP USB Bootloader needs checksum. if you use MDK, needs extra command to create checksum before create .bin file.
You must add project option's "Run User Program After build" section,
$K\ARM\BIN\ELFDWT.EXE !L
see http://www.keil.com/support/docs/3592.htm and http://www.keil.com/support/man/docs/uv4/uv4_ut_elfdwt.htm
If you create .bin on mbed online compiler, or program via JTAG(SWD), this process(option) is not needed.
Diff: main.cpp
- Revision:
- 0:14cf7caedfb4
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Sun Jun 09 11:02:11 2013 +0000
@@ -0,0 +1,50 @@
+//
+// for strawberry-linux.com's "lpclcd" 11U24 Board
+// https://strawberry-linux.com/catalog/items?code=12014
+//
+#include "mbed.h"
+#include "I2cLCD.h"
+
+// SW,LED,PULLUP
+// P0_1 : USER SW (ISP)
+// P0_6 : LED
+// P0_23 : I2C PULLUP
+
+//
+// I2C LCD SlaveAddress = 0x7c
+// SlaveAddress , commands and the initialize sequence are almost
+// same as "i2c low voltage lcd module" by strawberry-linux.
+// (http://strawberry-linux.com/catalog/items?code=27001)
+//
+// So I2cLCD library seems to work well.
+//
+// P0_25 : RESET
+// P0_4 : SCL
+// P0_5 : SDA
+// P1_3 : LCD BACKLIGHT
+//
+
+DigitalIn sw(P0_1);
+DigitalOut backlight(P1_3);
+DigitalOut led(P1_6); // The manual says "P0_6" but schematic is "P1_6"
+I2cLCD lcd(P0_5, P0_4,P0_25);
+Ticker timer;
+
+int count = 0 ;
+
+void attime()
+{
+ lcd.locate(0,0);
+ lcd.printf("Hello World! %d\r\n",count);
+ led = !led;
+ count++ ;
+}
+
+int main()
+{
+ backlight = 0;
+ timer.attach(&attime, 1);
+ while(1)
+ {
+ }
+}