Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
Diff: hal/i2c_api.h
- Revision:
- 13:0645d8841f51
- Parent:
- 10:3bc89ef62ce7
diff -r 5fa2273de5db -r 0645d8841f51 hal/i2c_api.h --- a/hal/i2c_api.h Wed Jul 24 11:11:21 2013 +0100 +++ b/hal/i2c_api.h Mon Aug 05 14:12:34 2013 +0300 @@ -1,53 +1,58 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2013 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_I2C_API_H -#define MBED_I2C_API_H - -#include "device.h" - -#if DEVICE_I2C - -#ifdef __cplusplus -extern "C" { -#endif - -typedef struct i2c_s i2c_t; - -void i2c_init (i2c_t *obj, PinName sda, PinName scl); -void i2c_frequency (i2c_t *obj, int hz); -int i2c_start (i2c_t *obj); -void i2c_stop (i2c_t *obj); -int i2c_read (i2c_t *obj, int address, char *data, int length, int stop); -int i2c_write (i2c_t *obj, int address, const char *data, int length, int stop); -void i2c_reset (i2c_t *obj); -int i2c_byte_read (i2c_t *obj, int last); -int i2c_byte_write (i2c_t *obj, int data); - -#if DEVICE_I2CSLAVE -void i2c_slave_mode (i2c_t *obj, int enable_slave); -int i2c_slave_receive(i2c_t *obj); -int i2c_slave_read (i2c_t *obj, char *data, int length); -int i2c_slave_write (i2c_t *obj, const char *data, int length); -void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask); -#endif - -#ifdef __cplusplus -} -#endif - -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2013 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_I2C_API_H +#define MBED_I2C_API_H + +#include "device.h" + +#if DEVICE_I2C + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct i2c_s i2c_t; + +enum { + I2C_ERROR_NO_SLAVE = -1, + I2C_ERROR_BUS_BUSY = -2 +}; + +void i2c_init (i2c_t *obj, PinName sda, PinName scl); +void i2c_frequency (i2c_t *obj, int hz); +int i2c_start (i2c_t *obj); +int i2c_stop (i2c_t *obj); +int i2c_read (i2c_t *obj, int address, char *data, int length, int stop); +int i2c_write (i2c_t *obj, int address, const char *data, int length, int stop); +void i2c_reset (i2c_t *obj); +int i2c_byte_read (i2c_t *obj, int last); +int i2c_byte_write (i2c_t *obj, int data); + +#if DEVICE_I2CSLAVE +void i2c_slave_mode (i2c_t *obj, int enable_slave); +int i2c_slave_receive(i2c_t *obj); +int i2c_slave_read (i2c_t *obj, char *data, int length); +int i2c_slave_write (i2c_t *obj, const char *data, int length); +void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask); +#endif + +#ifdef __cplusplus +} +#endif + +#endif + +#endif