Fork of mbed-src file paths change. LPC1114FN28 use only.
Fork of mbed-src by
Information
この情報は2013/10/28時点での解決方法です。
現在はmbed-src、標準ライブラリで問題なくコンパイルが可能です。
・使う物
LPC1114FN28
mbed SDK
LPC1114FN28でmbed-SDKのLibraryを使うとCompile出来ない。(2013/10/28)
パスが通ってないだけのようなのでファイルを以下に移動する。
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\cmsis\TARGET_NXP\TARGET_LPC11XX_11CXX\にある
TOOLCHAIN_ARM_MICRO |
をフォルダごと
mbed-src\targets\cmsis\TARGET_NXP\ |
へ移動
mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\ mbed-src\targets\hal\TARGET_NXP\TARGET_LPC11XX_11CXX\TARGET_LPC11XX\ |
にあるファイルをすべて
mbed-src\targets\hal\TARGET_NXP\ |
へ移動
移動後は以下のような構成になると思います。
※不要なファイルは削除してあります。
ファイルの移動が面倒なので以下に本家からフォークしたライブラリを置いておきます。
Import librarymbed-src-LPC1114FN28
Fork of mbed-src file paths change. LPC1114FN28 use only.
エラーが出力される場合
"TOOLCHAIN_ARM_MICRO"が無いとエラーになる。
Error: Undefined symbol _initial_sp (referred from entry2.o). Error: Undefined symbol _heap_base (referred from malloc.o). Error: Undefined symbol _heap_limit (referred from malloc.o). |
LPC1114FN28はMicrolibを使ってCompileされるため上記のエラーになるようです。
hal/i2c_api.h
- Committer:
- bogdanm
- Date:
- 2013-08-05
- Revision:
- 13:0645d8841f51
- Parent:
- 10:3bc89ef62ce7
File content as of revision 13:0645d8841f51:
/* mbed Microcontroller Library * Copyright (c) 2006-2013 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_I2C_API_H #define MBED_I2C_API_H #include "device.h" #if DEVICE_I2C #ifdef __cplusplus extern "C" { #endif typedef struct i2c_s i2c_t; enum { I2C_ERROR_NO_SLAVE = -1, I2C_ERROR_BUS_BUSY = -2 }; void i2c_init (i2c_t *obj, PinName sda, PinName scl); void i2c_frequency (i2c_t *obj, int hz); int i2c_start (i2c_t *obj); int i2c_stop (i2c_t *obj); int i2c_read (i2c_t *obj, int address, char *data, int length, int stop); int i2c_write (i2c_t *obj, int address, const char *data, int length, int stop); void i2c_reset (i2c_t *obj); int i2c_byte_read (i2c_t *obj, int last); int i2c_byte_write (i2c_t *obj, int data); #if DEVICE_I2CSLAVE void i2c_slave_mode (i2c_t *obj, int enable_slave); int i2c_slave_receive(i2c_t *obj); int i2c_slave_read (i2c_t *obj, char *data, int length); int i2c_slave_write (i2c_t *obj, const char *data, int length); void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask); #endif #ifdef __cplusplus } #endif #endif #endif