File content as of revision 10:da76961ba3e9:

/*
 * driverAtmelRFInterface.h
 *
 *  Created on: 14 July 2014
 *      Author: mBed Team
 */

#ifndef DRIVERRFINTERFACE_H_
#define DRIVERRFINTERFACE_H_


/*Delay between transfers(bytes) (32*DLYBCT)/MCK -> (32*6/120MHz=1.6us)*/
#define SPI_DLYBCT  6
/*Delay before SPCK DLYBS/MCK -> 140/120MHz=1.16us)*/
#define SPI_DLYBS   140
/*Serial clock baud rate MCK/SCBR -> 120MHz/18=6.7MHz)*/
#define SPI_SCBR    18

#define PHY_ACK_WAIT_TICK_VAL 185
#define PHY_CALIBRATION_TICK_VAL 185
#define PHY_ACK_WAIT_TIMER  1
#define PHY_CALIBRATION_TIMER   2

/*Supported transceivers*/
#define PART_AT86RF231      0x03
#define PART_AT86RF212      0x07
#define PART_AT86RF233      0x0B
#define VERSION_AT86RF212   0x01
#define VERSION_AT86RF212B  0x03

/*RF Configuration Registers*/
#define TRX_STATUS      0x01
#define TRX_STATE       0x02
#define TRX_CTRL_0      0x03
#define TRX_CTRL_1      0x04
#define PHY_TX_PWR      0x05
#define PHY_RSSI        0x06
#define PHY_ED_LEVEL    0x07
#define PHY_CC_CCA      0x08
#define RX_CTRL         0x0A
#define SFD_VALUE       0x0B
#define TRX_CTRL_2      0x0C
#define ANT_DIV         0x0D
#define IRQ_MASK        0x0E
#define IRQ_STATUS      0x0F
#define VREG_CTRL       0x10
#define BATMON          0x11
#define XOSC_CTRL       0x12
#define CC_CTRL_0       0x13
#define CC_CTRL_1       0x14
#define RX_SYN          0x15
#define TRX_RPC         0x16
#define RF_CTRL_0       0x16
#define XAH_CTRL_1      0x17
#define FTN_CTRL        0x18
#define PLL_CF          0x1A
#define PLL_DCU         0x1B
#define PART_NUM        0x1C
#define VERSION_NUM     0x1D
#define MAN_ID_0        0x1E
#define MAN_ID_1        0x1F
#define SHORT_ADDR_0    0x20
#define SHORT_ADDR_1    0x21
#define PAN_ID_0        0x22
#define PAN_ID_1        0x23
#define IEEE_ADDR_0     0x24
#define IEEE_ADDR_1     0x25
#define IEEE_ADDR_2     0x26
#define IEEE_ADDR_3     0x27
#define IEEE_ADDR_4     0x28
#define IEEE_ADDR_5     0x29
#define IEEE_ADDR_6     0x2A
#define IEEE_ADDR_7     0x2B
#define XAH_CTRL_0      0x2C
#define CSMA_SEED_0     0x2D
#define CSMA_SEED_1     0x2E
#define CSMA_BE         0x2F

/* CSMA_SEED_1*/
#define AACK_FVN_MODE1          7
#define AACK_FVN_MODE0          6
#define AACK_SET_PD             5
#define AACK_DIS_ACK            4
#define AACK_I_AM_COORD         3
#define CSMA_SEED_12            2
#define CSMA_SEED_11            1
#define CSMA_SEED_10            0

/*TRX_STATUS bits*/
#define CCA_STATUS  0x40
#define CCA_DONE    0x80

/*PHY_CC_CCA bits*/
#define CCA_REQUEST 0x80
#define CCA_MODE_1 0x20
#define CCA_MODE_3 0x60

/*IRQ_MASK bits*/
#define RX_START 0x04
#define TRX_END 0x08
#define CCA_ED_DONE 0x10
#define AMI 0x20
#define TRX_UR 0x40

/*ANT_DIV bits*/
#define ANT_DIV_EN      0x08
#define ANT_EXT_SW_EN   0x04
#define ANT_CTRL_DEFAULT    0x03

/*TRX_CTRL_1 bits*/
#define PA_EXT_EN       0x80

/*FTN_CTRL bits*/
#define FTN_START       0x80

/*PHY_RSSI bits*/
#define CRC_VALID   0x80

/*AT86RF212 PHY Modes*/
#define BPSK_20                     0x00
#define BPSK_40                     0x04
#define BPSK_40_ALT                 0x14
#define OQPSK_SIN_RC_100            0x08
#define OQPSK_SIN_RC_200            0x09
#define OQPSK_RC_100                0x18
#define OQPSK_RC_200                0x19
#define OQPSK_SIN_250               0x0c
#define OQPSK_SIN_500               0x0d
#define OQPSK_SIN_500_ALT           0x0f
#define OQPSK_RC_250                0x1c
#define OQPSK_RC_500                0x1d
#define OQPSK_RC_500_ALT            0x1f
#define OQPSK_SIN_RC_400_SCR_ON     0x2A
#define OQPSK_SIN_RC_400_SCR_OFF    0x0A
#define OQPSK_RC_400_SCR_ON         0x3A
#define OQPSK_RC_400_SCR_OFF        0x1A
#define OQPSK_SIN_1000_SCR_ON       0x2E
#define OQPSK_SIN_1000_SCR_OFF      0x0E
#define OQPSK_RC_1000_SCR_ON        0x3E
#define OQPSK_RC_1000_SCR_OFF       0x1E

extern void rf_if_delay_function(uint16_t ticks);
extern uint8_t rf_if_read_rnd(void);
extern void rf_if_calibration_timer_start(uint32_t slots);
extern void rf_if_interrupt_handler(void);
extern void (*rf_if_get_rf_interrupt_function(void))(void);
extern void rf_if_calibration_timer_interrupt(void);
extern void rf_if_timer_init(void);
extern void rf_if_ack_wait_timer_start(uint16_t slots);
extern void rf_if_ack_wait_timer_stop(void);
extern void rf_if_ack_wait_timer_interrupt(void);
extern int8_t rf_if_set_rf_irq_pin(uint8_t port, uint8_t pin);
extern int8_t rf_if_set_slp_tr_pin(uint8_t port, uint8_t pin);
extern int8_t rf_if_set_reset_pin(uint8_t port, uint8_t pin);
extern int8_t rf_if_set_spi_interface(uint8_t spi_interface, uint8_t cs_device);
extern uint8_t rf_if_spi_exchange(uint8_t spi_if, uint8_t out);
extern void rf_if_ack_pending_ctrl(uint8_t state);
extern void rf_if_calibration(void);
extern uint8_t rf_if_read_register(uint8_t addr);
extern void rf_if_set_bit(uint8_t addr, uint8_t bit, uint8_t bit_mask);
extern void rf_if_clear_bit(uint8_t addr, uint8_t bit);
extern void rf_if_write_register(uint8_t addr, uint8_t data);
extern void rf_if_reset_radio(void);
extern void rf_if_enable_pa_ext(void);
extern void rf_if_disable_pa_ext(void);
extern void rf_if_enable_ant_div(void);
extern void rf_if_disable_ant_div(void);
extern void rf_if_enable_slptr(void);
extern void rf_if_disable_slptr(void);
extern void rf_if_write_antenna_diversity_settings(void);
extern void rf_if_write_set_tx_power_register(uint8_t value);
extern void rf_if_write_set_trx_rpc_register(uint8_t value);
extern void rf_if_write_rf_settings(void);
extern uint8_t rf_if_check_cca(void);
extern uint8_t rf_if_check_crc(void);
extern uint8_t rf_if_read_trx_state(void);
extern void rf_if_read_packet(uint8_t *ptr, uint8_t len);
extern void rf_if_write_short_addr_registers(uint8_t *short_address);
extern uint8_t rf_if_last_acked_pending(void);
extern void rf_if_write_pan_id_registers(uint8_t *pan_id);
extern void rf_if_write_ieee_addr_registers(uint8_t *address);
extern void rf_if_write_frame_buffer(uint8_t *ptr, uint8_t length);
extern void rf_if_change_trx_state(rf_trx_states_t trx_state);
extern void rf_if_enable_tx_end_interrupt(void);
extern void rf_if_enable_rx_end_interrupt(void);
extern void rf_if_enable_rx_start_interrupt(void);
extern void rf_if_enable_cca_ed_done_interrupt(void);
extern void rf_if_start_cca_process(void);
extern uint8_t rf_if_read_received_frame_length(void);
extern uint8_t rf_if_read_lqi(void);
extern int8_t rf_if_read_rssi(void);
extern void rf_if_set_channel_register(uint8_t channel);

#endif /* DRIVERRFINTERFACE_H_ */