removed X-NUCLEO-COMMON and ST-INTERFACES
Dependents: unh-hackathon-example unh-hackathon-example-raw
Fork of X_NUCLEO_IKS01A1 by
Components/hts221/hts221_class.h@57:04563dd74269, 2015-06-15 (annotated)
- Committer:
- Wolfgang Betz
- Date:
- Mon Jun 15 10:28:49 2015 +0200
- Revision:
- 57:04563dd74269
- Parent:
- 54:2a676c734b30
- Child:
- 88:7b8d3316d753
Further fine-tuning of doxygen comments
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Wolfgang Betz |
4:566f2c41dc1d | 1 | /** |
Wolfgang Betz |
4:566f2c41dc1d | 2 | ****************************************************************************** |
Wolfgang Betz |
4:566f2c41dc1d | 3 | * @file hts221_class.h |
Wolfgang Betz |
4:566f2c41dc1d | 4 | * @author AST / EST |
Wolfgang Betz |
4:566f2c41dc1d | 5 | * @version V0.0.1 |
Wolfgang Betz |
4:566f2c41dc1d | 6 | * @date 14-April-2015 |
Wolfgang Betz |
4:566f2c41dc1d | 7 | * @brief Header file for component HTS221 |
Wolfgang Betz |
4:566f2c41dc1d | 8 | ****************************************************************************** |
Wolfgang Betz |
4:566f2c41dc1d | 9 | * @attention |
Wolfgang Betz |
4:566f2c41dc1d | 10 | * |
Wolfgang Betz |
4:566f2c41dc1d | 11 | * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> |
Wolfgang Betz |
4:566f2c41dc1d | 12 | * |
Wolfgang Betz |
4:566f2c41dc1d | 13 | * Redistribution and use in source and binary forms, with or without modification, |
Wolfgang Betz |
4:566f2c41dc1d | 14 | * are permitted provided that the following conditions are met: |
Wolfgang Betz |
4:566f2c41dc1d | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
Wolfgang Betz |
4:566f2c41dc1d | 16 | * this list of conditions and the following disclaimer. |
Wolfgang Betz |
4:566f2c41dc1d | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
Wolfgang Betz |
4:566f2c41dc1d | 18 | * this list of conditions and the following disclaimer in the documentation |
Wolfgang Betz |
4:566f2c41dc1d | 19 | * and/or other materials provided with the distribution. |
Wolfgang Betz |
4:566f2c41dc1d | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
Wolfgang Betz |
4:566f2c41dc1d | 21 | * may be used to endorse or promote products derived from this software |
Wolfgang Betz |
4:566f2c41dc1d | 22 | * without specific prior written permission. |
Wolfgang Betz |
4:566f2c41dc1d | 23 | * |
Wolfgang Betz |
4:566f2c41dc1d | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
Wolfgang Betz |
4:566f2c41dc1d | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
Wolfgang Betz |
4:566f2c41dc1d | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
Wolfgang Betz |
4:566f2c41dc1d | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
Wolfgang Betz |
4:566f2c41dc1d | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
Wolfgang Betz |
4:566f2c41dc1d | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
Wolfgang Betz |
4:566f2c41dc1d | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Wolfgang Betz |
4:566f2c41dc1d | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Wolfgang Betz |
4:566f2c41dc1d | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Wolfgang Betz |
4:566f2c41dc1d | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Wolfgang Betz |
4:566f2c41dc1d | 34 | * |
Wolfgang Betz |
4:566f2c41dc1d | 35 | ****************************************************************************** |
Wolfgang Betz |
4:566f2c41dc1d | 36 | */ |
Wolfgang Betz |
4:566f2c41dc1d | 37 | |
Wolfgang Betz |
4:566f2c41dc1d | 38 | #ifndef __HTS221_CLASS_H |
Wolfgang Betz |
4:566f2c41dc1d | 39 | #define __HTS221_CLASS_H |
Wolfgang Betz |
4:566f2c41dc1d | 40 | |
Wolfgang Betz |
4:566f2c41dc1d | 41 | /* Includes ------------------------------------------------------------------*/ |
Wolfgang Betz |
4:566f2c41dc1d | 42 | #include "mbed.h" |
Wolfgang Betz |
4:566f2c41dc1d | 43 | #include "DevI2C.h" |
Wolfgang Betz |
57:04563dd74269 | 44 | #include "hts221.h" |
Wolfgang Betz |
43:2544d064d528 | 45 | #include "../Interfaces/HumiditySensor.h" |
Wolfgang Betz |
43:2544d064d528 | 46 | #include "../Interfaces/TempSensor.h" |
Wolfgang Betz |
4:566f2c41dc1d | 47 | |
Wolfgang Betz |
4:566f2c41dc1d | 48 | /* Classes -------------------------------------------------------------------*/ |
Wolfgang Betz |
4:566f2c41dc1d | 49 | /** Class representing a HTS221 sensor component |
Wolfgang Betz |
4:566f2c41dc1d | 50 | */ |
Wolfgang Betz |
20:c20c8bd5be6b | 51 | class HTS221 : public HumiditySensor, public TempSensor { |
Wolfgang Betz |
4:566f2c41dc1d | 52 | public: |
Wolfgang Betz |
4:566f2c41dc1d | 53 | /** Constructor |
Wolfgang Betz |
54:2a676c734b30 | 54 | * @param[in] i2c device I2C to be used for communication |
Wolfgang Betz |
4:566f2c41dc1d | 55 | */ |
Wolfgang Betz |
20:c20c8bd5be6b | 56 | HTS221(DevI2C &i2c) : HumiditySensor(), TempSensor(), dev_i2c(i2c) { |
Wolfgang Betz |
4:566f2c41dc1d | 57 | T0_degC = T1_degC = H0_rh = H1_rh = 0.0; |
Wolfgang Betz |
4:566f2c41dc1d | 58 | T0_out = T1_out = H0_T0_out = H1_T0_out = 0; |
Wolfgang Betz |
4:566f2c41dc1d | 59 | } |
Wolfgang Betz |
4:566f2c41dc1d | 60 | |
Wolfgang Betz |
44:d757094f6229 | 61 | /** Destructor |
Wolfgang Betz |
44:d757094f6229 | 62 | */ |
Wolfgang Betz |
44:d757094f6229 | 63 | virtual ~HTS221() {} |
Wolfgang Betz |
44:d757094f6229 | 64 | |
Wolfgang Betz |
4:566f2c41dc1d | 65 | /*** Interface Methods ***/ |
Wolfgang Betz |
18:1cb4ae9d83e7 | 66 | virtual int Init(void *init_struct) { |
Wolfgang Betz |
18:1cb4ae9d83e7 | 67 | return HTS221_Init((HUM_TEMP_InitTypeDef*)init_struct); |
Wolfgang Betz |
4:566f2c41dc1d | 68 | } |
Wolfgang Betz |
4:566f2c41dc1d | 69 | |
Wolfgang Betz |
50:f507d4465c31 | 70 | /** |
Wolfgang Betz |
50:f507d4465c31 | 71 | * @brief Enter sensor shutdown mode |
Wolfgang Betz |
50:f507d4465c31 | 72 | * @return 0 in case of success, an error code otherwise |
Wolfgang Betz |
50:f507d4465c31 | 73 | */ |
Wolfgang Betz |
20:c20c8bd5be6b | 74 | virtual int PowerOff(void) { |
Wolfgang Betz |
4:566f2c41dc1d | 75 | return HTS221_Power_OFF(); |
Wolfgang Betz |
4:566f2c41dc1d | 76 | } |
Wolfgang Betz |
4:566f2c41dc1d | 77 | |
Wolfgang Betz |
18:1cb4ae9d83e7 | 78 | virtual int ReadID(uint8_t *ht_id) { |
Wolfgang Betz |
4:566f2c41dc1d | 79 | return HTS221_ReadID(ht_id); |
Wolfgang Betz |
4:566f2c41dc1d | 80 | } |
Wolfgang Betz |
4:566f2c41dc1d | 81 | |
Wolfgang Betz |
50:f507d4465c31 | 82 | /** |
Wolfgang Betz |
50:f507d4465c31 | 83 | * @brief Reset sensor |
Wolfgang Betz |
50:f507d4465c31 | 84 | * @return 0 in case of success, an error code otherwise |
Wolfgang Betz |
50:f507d4465c31 | 85 | */ |
Wolfgang Betz |
18:1cb4ae9d83e7 | 86 | virtual int Reset(void) { |
Wolfgang Betz |
4:566f2c41dc1d | 87 | return HTS221_RebootCmd(); |
Wolfgang Betz |
4:566f2c41dc1d | 88 | } |
Wolfgang Betz |
4:566f2c41dc1d | 89 | |
Wolfgang Betz |
18:1cb4ae9d83e7 | 90 | virtual int GetHumidity(float *pfData) { |
Wolfgang Betz |
4:566f2c41dc1d | 91 | return HTS221_GetHumidity(pfData); |
Wolfgang Betz |
4:566f2c41dc1d | 92 | } |
Wolfgang Betz |
4:566f2c41dc1d | 93 | |
Wolfgang Betz |
18:1cb4ae9d83e7 | 94 | virtual int GetTemperature(float *pfData) { |
Wolfgang Betz |
4:566f2c41dc1d | 95 | return HTS221_GetTemperature(pfData); |
Wolfgang Betz |
4:566f2c41dc1d | 96 | } |
Wolfgang Betz |
4:566f2c41dc1d | 97 | |
Wolfgang Betz |
4:566f2c41dc1d | 98 | protected: |
Wolfgang Betz |
4:566f2c41dc1d | 99 | /*** Methods ***/ |
Wolfgang Betz |
4:566f2c41dc1d | 100 | HUM_TEMP_StatusTypeDef HTS221_Init(HUM_TEMP_InitTypeDef *HTS221_Init); |
Wolfgang Betz |
4:566f2c41dc1d | 101 | HUM_TEMP_StatusTypeDef HTS221_Power_OFF(void); |
Wolfgang Betz |
4:566f2c41dc1d | 102 | HUM_TEMP_StatusTypeDef HTS221_ReadID(uint8_t *ht_id); |
Wolfgang Betz |
4:566f2c41dc1d | 103 | HUM_TEMP_StatusTypeDef HTS221_RebootCmd(void); |
Wolfgang Betz |
4:566f2c41dc1d | 104 | HUM_TEMP_StatusTypeDef HTS221_GetHumidity(float* pfData); |
Wolfgang Betz |
4:566f2c41dc1d | 105 | HUM_TEMP_StatusTypeDef HTS221_GetTemperature(float* pfData); |
Wolfgang Betz |
6:8d2abd695c52 | 106 | |
Wolfgang Betz |
4:566f2c41dc1d | 107 | HUM_TEMP_StatusTypeDef HTS221_Power_On(void); |
Wolfgang Betz |
4:566f2c41dc1d | 108 | HUM_TEMP_StatusTypeDef HTS221_Calibration(void); |
Wolfgang Betz |
4:566f2c41dc1d | 109 | |
Wolfgang Betz |
4:566f2c41dc1d | 110 | /** |
Wolfgang Betz |
4:566f2c41dc1d | 111 | * @brief Configures HTS221 interrupt lines for NUCLEO boards |
Wolfgang Betz |
4:566f2c41dc1d | 112 | */ |
Wolfgang Betz |
4:566f2c41dc1d | 113 | void HTS221_IO_ITConfig(void) |
Wolfgang Betz |
4:566f2c41dc1d | 114 | { |
Wolfgang Betz |
4:566f2c41dc1d | 115 | /* To be implemented */ |
Wolfgang Betz |
4:566f2c41dc1d | 116 | } |
Wolfgang Betz |
4:566f2c41dc1d | 117 | |
Wolfgang Betz |
4:566f2c41dc1d | 118 | /** |
Wolfgang Betz |
4:566f2c41dc1d | 119 | * @brief Configures HTS221 I2C interface |
Wolfgang Betz |
57:04563dd74269 | 120 | * @return HUM_TEMP_OK in case of success, an error code otherwise |
Wolfgang Betz |
4:566f2c41dc1d | 121 | */ |
Wolfgang Betz |
4:566f2c41dc1d | 122 | HUM_TEMP_StatusTypeDef HTS221_IO_Init(void) |
Wolfgang Betz |
4:566f2c41dc1d | 123 | { |
Wolfgang Betz |
4:566f2c41dc1d | 124 | return HUM_TEMP_OK; /* done in constructor */ |
Wolfgang Betz |
4:566f2c41dc1d | 125 | } |
Wolfgang Betz |
4:566f2c41dc1d | 126 | |
Wolfgang Betz |
4:566f2c41dc1d | 127 | /** |
Wolfgang Betz |
57:04563dd74269 | 128 | * @brief Utility function to read data from HTS221 |
Wolfgang Betz |
57:04563dd74269 | 129 | * @param[out] pBuffer pointer to the byte-array to read data in to |
Wolfgang Betz |
57:04563dd74269 | 130 | * @param[in] RegisterAddr specifies internal address register to read from. |
Wolfgang Betz |
57:04563dd74269 | 131 | * @param[in] NumByteToRead number of bytes to be read. |
Wolfgang Betz |
57:04563dd74269 | 132 | * @retval HUM_TEMP_OK if ok, |
Wolfgang Betz |
57:04563dd74269 | 133 | * @retval HUM_TEMP_ERROR if an I2C error has occured |
Wolfgang Betz |
4:566f2c41dc1d | 134 | */ |
Wolfgang Betz |
4:566f2c41dc1d | 135 | HUM_TEMP_StatusTypeDef HTS221_IO_Read(uint8_t* pBuffer, |
Wolfgang Betz |
4:566f2c41dc1d | 136 | uint8_t RegisterAddr, uint16_t NumByteToRead) |
Wolfgang Betz |
4:566f2c41dc1d | 137 | { |
Wolfgang Betz |
4:566f2c41dc1d | 138 | int ret = dev_i2c.i2c_read(pBuffer, |
Wolfgang Betz |
4:566f2c41dc1d | 139 | HTS221_ADDRESS, |
Wolfgang Betz |
4:566f2c41dc1d | 140 | RegisterAddr, |
Wolfgang Betz |
4:566f2c41dc1d | 141 | NumByteToRead); |
Wolfgang Betz |
4:566f2c41dc1d | 142 | if(ret != 0) { |
Wolfgang Betz |
4:566f2c41dc1d | 143 | return HUM_TEMP_ERROR; |
Wolfgang Betz |
4:566f2c41dc1d | 144 | } |
Wolfgang Betz |
4:566f2c41dc1d | 145 | return HUM_TEMP_OK; |
Wolfgang Betz |
4:566f2c41dc1d | 146 | } |
Wolfgang Betz |
4:566f2c41dc1d | 147 | |
Wolfgang Betz |
4:566f2c41dc1d | 148 | /** |
Wolfgang Betz |
57:04563dd74269 | 149 | * @brief Utility function to write data to HTS221 |
Wolfgang Betz |
57:04563dd74269 | 150 | * @param[in] pBuffer pointer to the byte-array data to send |
Wolfgang Betz |
57:04563dd74269 | 151 | * @param[in] RegisterAddr specifies internal address register to read from. |
Wolfgang Betz |
57:04563dd74269 | 152 | * @param[in] NumByteToWrite number of bytes to write. |
Wolfgang Betz |
57:04563dd74269 | 153 | * @retval HUM_TEMP_OK if ok, |
Wolfgang Betz |
57:04563dd74269 | 154 | * @retval HUM_TEMP_ERROR if an I2C error has occured |
Wolfgang Betz |
4:566f2c41dc1d | 155 | */ |
Wolfgang Betz |
4:566f2c41dc1d | 156 | HUM_TEMP_StatusTypeDef HTS221_IO_Write(uint8_t* pBuffer, |
Wolfgang Betz |
4:566f2c41dc1d | 157 | uint8_t RegisterAddr, uint16_t NumByteToWrite) |
Wolfgang Betz |
4:566f2c41dc1d | 158 | { |
Wolfgang Betz |
4:566f2c41dc1d | 159 | int ret = dev_i2c.i2c_write(pBuffer, |
Wolfgang Betz |
4:566f2c41dc1d | 160 | HTS221_ADDRESS, |
Wolfgang Betz |
4:566f2c41dc1d | 161 | RegisterAddr, |
Wolfgang Betz |
4:566f2c41dc1d | 162 | NumByteToWrite); |
Wolfgang Betz |
4:566f2c41dc1d | 163 | if(ret != 0) { |
Wolfgang Betz |
4:566f2c41dc1d | 164 | return HUM_TEMP_ERROR; |
Wolfgang Betz |
4:566f2c41dc1d | 165 | } |
Wolfgang Betz |
4:566f2c41dc1d | 166 | return HUM_TEMP_OK; |
Wolfgang Betz |
4:566f2c41dc1d | 167 | } |
Wolfgang Betz |
4:566f2c41dc1d | 168 | |
Wolfgang Betz |
4:566f2c41dc1d | 169 | /*** Instance Variables ***/ |
Wolfgang Betz |
4:566f2c41dc1d | 170 | /* IO Device */ |
Wolfgang Betz |
4:566f2c41dc1d | 171 | DevI2C &dev_i2c; |
Wolfgang Betz |
4:566f2c41dc1d | 172 | |
Wolfgang Betz |
4:566f2c41dc1d | 173 | /* Temperature in degree for calibration */ |
Wolfgang Betz |
4:566f2c41dc1d | 174 | float T0_degC, T1_degC; |
Wolfgang Betz |
4:566f2c41dc1d | 175 | |
Wolfgang Betz |
4:566f2c41dc1d | 176 | /* Output temperature value for calibration */ |
Wolfgang Betz |
4:566f2c41dc1d | 177 | int16_t T0_out, T1_out; |
Wolfgang Betz |
4:566f2c41dc1d | 178 | |
Wolfgang Betz |
4:566f2c41dc1d | 179 | /* Humidity for calibration */ |
Wolfgang Betz |
4:566f2c41dc1d | 180 | float H0_rh, H1_rh; |
Wolfgang Betz |
4:566f2c41dc1d | 181 | |
Wolfgang Betz |
4:566f2c41dc1d | 182 | /* Output Humidity value for calibration */ |
Wolfgang Betz |
4:566f2c41dc1d | 183 | int16_t H0_T0_out, H1_T0_out; |
Wolfgang Betz |
4:566f2c41dc1d | 184 | }; |
Wolfgang Betz |
4:566f2c41dc1d | 185 | |
Wolfgang Betz |
4:566f2c41dc1d | 186 | #endif // __HTS221_CLASS_H |