Fork of MODSERIAL that works with LPC4088
Fork of MODSERIAL by
Diff: MODSERIAL.h
- Revision:
- 1:b7e435fbfe8e
- Parent:
- 0:eb2522b41db8
- Child:
- 2:b936b4acbd92
diff -r eb2522b41db8 -r b7e435fbfe8e MODSERIAL.h --- a/MODSERIAL.h Sat Nov 20 16:54:05 2010 +0000 +++ b/MODSERIAL.h Sun Nov 21 02:15:07 2010 +0000 @@ -171,15 +171,15 @@ * * The Mbed standard <a href="/handbook/Serial">Serial</a> library object allows an interrupt callback * to be made when a byte is received by the TX or RX UART hardware. MODSERIAL traps these interrupts - * to enable it's buffering system. However, after the byte has been received/sent under interrupt caontrol, + * to enable it's buffering system. However, after the byte has been received/sent under interrupt control, * MODSERIAL can callback a user function as a notification of the interrupt. Note, user code should not - * directly interact with teh Uart hardware, MODSERIAL does that, instead, MODSERIAL API functions should + * directly interact with the Uart hardware, MODSERIAL does that, instead, MODSERIAL API functions should * be used. * * <b>Note</b>, a character is written out then, if there is room in the TX FIFO and the TX buffer is empty, * putc() will put the character directly into THR (the output holding register). If the TX FIFO is full and * cannot accept the character, it is placed into the TX output buffer. The TX interrupts are then enabled - * so that when teh TX FIFO empties, the TX buffer is then transferred to the THR FIFO. The TxIrq will ONLY + * so that when the TX FIFO empties, the TX buffer is then transferred to the THR FIFO. The TxIrq will ONLY * be activated when this transfer of a character from BUFFER to THR FIFO takes place. If your character * throughput is not high bandwidth, then the 16 byte TX FIFO may be enough and the TX output buffer may * never come into play. @@ -230,15 +230,15 @@ * * The Mbed standard <a href="/handbook/Serial">Serial</a> library object allows an interrupt callback * to be made when a byte is received by the TX or RX UART hardware. MODSERIAL traps these interrupts - * to enable it's buffering system. However, after the byte has been received/sent under interrupt caontrol, + * to enable it's buffering system. However, after the byte has been received/sent under interrupt control, * MODSERIAL can callback a user function as a notification of the interrupt. Note, user code should not - * directly interact with teh Uart hardware, MODSERIAL does that, instead, MODSERIAL API functions should + * directly interact with the Uart hardware, MODSERIAL does that, instead, MODSERIAL API functions should * be used. * * <b>Note</b>, a character is written out then, if there is room in the TX FIFO and the TX buffer is empty, * putc() will put the character directly into THR (the output holding register). If the TX FIFO is full and * cannot accept the character, it is placed into the TX output buffer. The TX interrupts are then enabled - * so that when teh TX FIFO empties, the TX buffer is then transferred to the THR FIFO. The TxIrq will ONLY + * so that when the TX FIFO empties, the TX buffer is then transferred to the THR FIFO. The TxIrq will ONLY * be activated when this transfer of a character from BUFFER to THR FIFO takes place. If your character * throughput is not high bandwidth, then the 16 byte TX FIFO may be enough and the TX output buffer may * never come into play. @@ -523,7 +523,7 @@ /** * Function: txGetLastChar * - * Rteurn teh last byte to pass through the TX interrupt handler. + * Rteurn the last byte to pass through the TX interrupt handler. * * @ingroup MISC * @return The byte @@ -543,7 +543,7 @@ /** * Function: txIsBusy * - * If teh Uart is still actively sending characters this + * If the Uart is still actively sending characters this * function will return true. * * @ingroup API @@ -614,7 +614,7 @@ volatile char rxc; /** - * Pointers to teh TX and RX buffers. + * Pointers to the TX and RX buffers. * @ingroup INTERNALS */ volatile char *buffer[2]; @@ -690,7 +690,7 @@ /** * Put a character from the TX buffer * @ingroup INTERNALS - * @param bool True to block (wait for space in teh TX buffer if full) + * @param bool True to block (wait for space in the TX buffer if full) * @return 0 on success */ int __putc(int c, bool);