Diff: EthernetNetIf/LPC2368/lwip/include/lwip/sys.h

Revision:

0:f76708a93fb3

diff -r 000000000000 -r f76708a93fb3 EthernetNetIf/LPC2368/lwip/include/lwip/sys.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EthernetNetIf/LPC2368/lwip/include/lwip/sys.h	Sat Oct 15 14:15:55 2011 +0000
@@ -0,0 +1,331 @@
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __LWIP_SYS_H__
+#define __LWIP_SYS_H__
+
+#include "lwip/opt.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if NO_SYS
+
+/* For a totally minimal and standalone system, we provide null
+   definitions of the sys_ functions. */
+typedef u8_t sys_sem_t;
+typedef u8_t sys_mutex_t;
+typedef u8_t sys_mbox_t;
+
+#define sys_sem_new(s, c) ERR_OK
+#define sys_sem_signal(s)
+#define sys_sem_wait(s)
+#define sys_arch_sem_wait(s,t)
+#define sys_sem_free(s)
+#define sys_mutex_new(mu) ERR_OK
+#define sys_mutex_lock(mu)
+#define sys_mutex_unlock(mu)
+#define sys_mutex_free(mu)
+#define sys_mbox_new(m, s) ERR_OK
+#define sys_mbox_fetch(m,d)
+#define sys_mbox_tryfetch(m,d)
+#define sys_mbox_post(m,d)
+#define sys_mbox_trypost(m,d)
+#define sys_mbox_free(m)
+
+#define sys_thread_new(n,t,a,s,p)
+
+#define sys_msleep(t)
+
+#else /* NO_SYS */
+
+/** Return code for timeouts from sys_arch_mbox_fetch and sys_arch_sem_wait */
+#define SYS_ARCH_TIMEOUT 0xffffffffUL
+
+/** sys_mbox_tryfetch() returns SYS_MBOX_EMPTY if appropriate.
+ * For now we use the same magic value, but we allow this to change in future.
+ */
+#define SYS_MBOX_EMPTY SYS_ARCH_TIMEOUT 
+
+#include "lwip/err.h"
+#include "arch/sys_arch.h"
+
+/** Function prototype for thread functions */
+typedef void (*lwip_thread_fn)(void *arg);
+
+/* Function prototypes for functions to be implemented by platform ports
+   (in sys_arch.c) */
+
+/* Mutex functions: */
+
+/** Define LWIP_COMPAT_MUTEX if the port has no mutexes and binary semaphores
+    should be used instead */
+#if LWIP_COMPAT_MUTEX
+/* for old ports that don't have mutexes: define them to binary semaphores */
+#define sys_mutex_t                   sys_sem_t
+#define sys_mutex_new(mutex)          sys_sem_new(mutex, 1)
+#define sys_mutex_lock(mutex)         sys_sem_wait(mutex)
+#define sys_mutex_unlock(mutex)       sys_sem_signal(mutex)
+#define sys_mutex_free(mutex)         sys_sem_free(mutex)
+#define sys_mutex_valid(mutex)        sys_sem_valid(mutex)
+#define sys_mutex_set_invalid(mutex)  sys_sem_set_invalid(mutex)
+
+#else /* LWIP_COMPAT_MUTEX */
+
+/** Create a new mutex
+ * @param mutex pointer to the mutex to create
+ * @return a new mutex */
+err_t sys_mutex_new(sys_mutex_t *mutex);
+/** Lock a mutex
+ * @param mutex the mutex to lock */
+void sys_mutex_lock(sys_mutex_t *mutex);
+/** Unlock a mutex
+ * @param mutex the mutex to unlock */
+void sys_mutex_unlock(sys_mutex_t *mutex);
+/** Delete a semaphore
+ * @param mutex the mutex to delete */
+void sys_mutex_free(sys_mutex_t *mutex); 
+#ifndef sys_mutex_valid
+/** Check if a mutex is valid/allocated: return 1 for valid, 0 for invalid */
+int sys_mutex_valid(sys_mutex_t *mutex);
+#endif
+#ifndef sys_mutex_set_invalid
+/** Set a mutex invalid so that sys_mutex_valid returns 0 */
+void sys_mutex_set_invalid(sys_mutex_t *mutex);
+#endif
+#endif /* LWIP_COMPAT_MUTEX */
+
+/* Semaphore functions: */
+
+/** Create a new semaphore
+ * @param sem pointer to the semaphore to create
+ * @param count initial count of the semaphore
+ * @return ERR_OK if successful, another err_t otherwise */
+err_t sys_sem_new(sys_sem_t *sem, u8_t count);
+/** Signals a semaphore
+ * @param sem the semaphore to signal */
+void sys_sem_signal(sys_sem_t *sem);
+/** Wait for a semaphore for the specified timeout
+ * @param sem the semaphore to wait for
+ * @param timeout timeout in milliseconds to wait (0 = wait forever)
+ * @return time (in milliseconds) waited for the semaphore
+ *         or SYS_ARCH_TIMEOUT on timeout */
+u32_t sys_arch_sem_wait(sys_sem_t *sem, u32_t timeout);
+/** Delete a semaphore
+ * @param sem semaphore to delete */
+void sys_sem_free(sys_sem_t *sem);
+/** Wait for a semaphore - forever/no timeout */
+#define sys_sem_wait(sem)                  sys_arch_sem_wait(sem, 0)
+#ifndef sys_sem_valid
+/** Check if a sempahore is valid/allocated: return 1 for valid, 0 for invalid */
+int sys_sem_valid(sys_sem_t *sem);
+#endif
+#ifndef sys_sem_set_invalid
+/** Set a semaphore invalid so that sys_sem_valid returns 0 */
+void sys_sem_set_invalid(sys_sem_t *sem);
+#endif
+
+/* Time functions. */
+#ifndef sys_msleep
+void sys_msleep(u32_t ms); /* only has a (close to) 1 jiffy resolution. */
+#endif
+
+/* Mailbox functions. */
+
+/** Create a new mbox of specified size
+ * @param mbox pointer to the mbox to create
+ * @param size (miminum) number of messages in this mbox
+ * @return ERR_OK if successful, another err_t otherwise */
+err_t sys_mbox_new(sys_mbox_t *mbox, int size);
+/** Post a message to an mbox - may not fail
+ * -> blocks if full, only used from tasks not from ISR
+ * @param mbox mbox to posts the message
+ * @param msg message to post (ATTENTION: can be NULL) */
+void sys_mbox_post(sys_mbox_t *mbox, void *msg);
+/** Try to post a message to an mbox - may fail if full or ISR
+ * @param mbox mbox to posts the message
+ * @param msg message to post (ATTENTION: can be NULL) */
+err_t sys_mbox_trypost(sys_mbox_t *mbox, void *msg);
+/** Wait for a new message to arrive in the mbox
+ * @param mbox mbox to get a message from
+ * @param msg pointer where the message is stored
+ * @param timeout maximum time (in milliseconds) to wait for a message
+ * @return time (in milliseconds) waited for a message, may be 0 if not waited
+           or SYS_ARCH_TIMEOUT on timeout
+ *         The returned time has to be accurate to prevent timer jitter! */
+u32_t sys_arch_mbox_fetch(sys_mbox_t *mbox, void **msg, u32_t timeout);
+/* Allow port to override with a macro, e.g. special timout for sys_arch_mbox_fetch() */
+#ifndef sys_arch_mbox_tryfetch
+/** Wait for a new message to arrive in the mbox
+ * @param mbox mbox to get a message from
+ * @param msg pointer where the message is stored
+ * @param timeout maximum time (in milliseconds) to wait for a message
+ * @return 0 (milliseconds) if a message has been received
+ *         or SYS_MBOX_EMPTY if the mailbox is empty */
+u32_t sys_arch_mbox_tryfetch(sys_mbox_t *mbox, void **msg);
+#endif
+/** For now, we map straight to sys_arch implementation. */
+#define sys_mbox_tryfetch(mbox, msg) sys_arch_mbox_tryfetch(mbox, msg)
+/** Delete an mbox
+ * @param mbox mbox to delete */
+void sys_mbox_free(sys_mbox_t *mbox);
+#define sys_mbox_fetch(mbox, msg) sys_arch_mbox_fetch(mbox, msg, 0)
+#ifndef sys_mbox_valid
+/** Check if an mbox is valid/allocated: return 1 for valid, 0 for invalid */
+int sys_mbox_valid(sys_mbox_t *mbox);
+#endif
+#ifndef sys_mbox_set_invalid
+/** Set an mbox invalid so that sys_mbox_valid returns 0 */
+void sys_mbox_set_invalid(sys_mbox_t *mbox);
+#endif
+
+/** The only thread function:
+ * Creates a new thread
+ * @param name human-readable name for the thread (used for debugging purposes)
+ * @param thread thread-function
+ * @param arg parameter passed to 'thread'
+ * @param stacksize stack size in bytes for the new thread (may be ignored by ports)
+ * @param prio priority of the new thread (may be ignored by ports) */
+sys_thread_t sys_thread_new(const char *name, lwip_thread_fn thread, void *arg, int stacksize, int prio);
+
+#endif /* NO_SYS */
+
+/* sys_init() must be called before anthing else. */
+void sys_init(void);
+
+#ifndef sys_jiffies
+/** Ticks/jiffies since power up. */
+u32_t sys_jiffies(void);
+#endif
+
+/** Returns the current time in milliseconds,
+ * may be the same as sys_jiffies or at least based on it. */
+u32_t sys_now(void);
+
+/* Critical Region Protection */
+/* These functions must be implemented in the sys_arch.c file.
+   In some implementations they can provide a more light-weight protection
+   mechanism than using semaphores. Otherwise semaphores can be used for
+   implementation */
+#ifndef SYS_ARCH_PROTECT
+/** SYS_LIGHTWEIGHT_PROT
+ * define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection
+ * for certain critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#if SYS_LIGHTWEIGHT_PROT
+
+/** SYS_ARCH_DECL_PROTECT
+ * declare a protection variable. This macro will default to defining a variable of
+ * type sys_prot_t. If a particular port needs a different implementation, then
+ * this macro may be defined in sys_arch.h.
+ */
+#define SYS_ARCH_DECL_PROTECT(lev) sys_prot_t lev
+/** SYS_ARCH_PROTECT
+ * Perform a "fast" protect. This could be implemented by
+ * disabling interrupts for an embedded system or by using a semaphore or
+ * mutex. The implementation should allow calling SYS_ARCH_PROTECT when
+ * already protected. The old protection level is returned in the variable
+ * "lev". This macro will default to calling the sys_arch_protect() function
+ * which should be implemented in sys_arch.c. If a particular port needs a
+ * different implementation, then this macro may be defined in sys_arch.h
+ */
+#define SYS_ARCH_PROTECT(lev) lev = sys_arch_protect()
+/** SYS_ARCH_UNPROTECT
+ * Perform a "fast" set of the protection level to "lev". This could be
+ * implemented by setting the interrupt level to "lev" within the MACRO or by
+ * using a semaphore or mutex.  This macro will default to calling the
+ * sys_arch_unprotect() function which should be implemented in
+ * sys_arch.c. If a particular port needs a different implementation, then
+ * this macro may be defined in sys_arch.h
+ */
+#define SYS_ARCH_UNPROTECT(lev) sys_arch_unprotect(lev)
+sys_prot_t sys_arch_protect(void);
+void sys_arch_unprotect(sys_prot_t pval);
+
+#else
+
+#define SYS_ARCH_DECL_PROTECT(lev)
+#define SYS_ARCH_PROTECT(lev)
+#define SYS_ARCH_UNPROTECT(lev)
+
+#endif /* SYS_LIGHTWEIGHT_PROT */
+
+#endif /* SYS_ARCH_PROTECT */
+
+/*
+ * Macros to set/get and increase/decrease variables in a thread-safe way.
+ * Use these for accessing variable that are used from more than one thread.
+ */
+
+#ifndef SYS_ARCH_INC
+#define SYS_ARCH_INC(var, val) do { \
+                                SYS_ARCH_DECL_PROTECT(old_level); \
+                                SYS_ARCH_PROTECT(old_level); \
+                                var += val; \
+                                SYS_ARCH_UNPROTECT(old_level); \
+                              } while(0)
+#endif /* SYS_ARCH_INC */
+
+#ifndef SYS_ARCH_DEC
+#define SYS_ARCH_DEC(var, val) do { \
+                                SYS_ARCH_DECL_PROTECT(old_level); \
+                                SYS_ARCH_PROTECT(old_level); \
+                                var -= val; \
+                                SYS_ARCH_UNPROTECT(old_level); \
+                              } while(0)
+#endif /* SYS_ARCH_DEC */
+
+#ifndef SYS_ARCH_GET
+#define SYS_ARCH_GET(var, ret) do { \
+                                SYS_ARCH_DECL_PROTECT(old_level); \
+                                SYS_ARCH_PROTECT(old_level); \
+                                ret = var; \
+                                SYS_ARCH_UNPROTECT(old_level); \
+                              } while(0)
+#endif /* SYS_ARCH_GET */
+
+#ifndef SYS_ARCH_SET
+#define SYS_ARCH_SET(var, val) do { \
+                                SYS_ARCH_DECL_PROTECT(old_level); \
+                                SYS_ARCH_PROTECT(old_level); \
+                                var = val; \
+                                SYS_ARCH_UNPROTECT(old_level); \
+                              } while(0)
+#endif /* SYS_ARCH_SET */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __LWIP_SYS_H__ */