Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

diff -r e95d10626187 -r 3a7713b1edbc TARGET_SDT51822B/TOOLCHAIN_IAR/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,251 @@
+/* 
+ * Copyright (c) 2013 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define NOT_CONNECTED (int)0xFFFFFFFF
+#define PORT_SHIFT  3
+
+typedef enum {
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,
+
+    P0_0  = p0,
+    P0_1  = p1,
+    P0_2  = p2,
+    P0_3  = p3,
+    P0_4  = p4,
+    P0_5  = p5,
+    P0_6  = p6,
+    P0_7  = p7,
+
+    P0_8  = p8,
+    P0_9  = p9,
+    P0_10 = p10,
+    P0_11 = p11,
+    P0_12 = p12,
+    P0_13 = p13,
+    P0_14 = p14,
+    P0_15 = p15,
+
+    P0_16 = p16,
+    P0_17 = p17,
+    P0_18 = p18,
+    P0_19 = p19,
+    P0_20 = p20,
+    P0_21 = p21,
+    P0_22 = p22,
+    P0_23 = p23,
+
+    P0_24 = p24,
+    P0_25 = p25,
+    P0_26 = p26,
+    P0_27 = p27,
+    P0_28 = p28,
+    P0_29 = p29,
+    P0_30 = p30,
+
+    // Analog
+    A0 = P0_1,
+    A1 = P0_2,
+    A2 = P0_3,
+    A3 = P0_4,
+
+    // General Pin Input Output (GPIO)
+    GPIO0 = P0_5,
+    GPIO1 = P0_7,
+    GPIO2 = P0_12,
+    GPIO3 = NOT_CONNECTED,
+    GPIO4 = NOT_CONNECTED,
+    GPIO5 = NOT_CONNECTED,
+    GPIO6 = NOT_CONNECTED,
+
+    //Purse Width Modulation (PWM)
+    PWM0 = GPIO2,
+    PWM1 = GPIO3,
+    PWM2 = GPIO0,
+    PWM3 = GPIO1,
+
+    // LEDs
+    LED0 = GPIO0,
+    LED1 = GPIO1,
+    LED2 = GPIO2,
+   
+    LED_RED   = LED0,
+    LED_GREEN = LED1,
+    LED_BLUE  = LED2,
+
+    // USB bridge and SWD UART connected UART pins
+    USBTX = P0_9,
+    USBRX = P0_11,
+
+    // UART pins
+    UART0_RX  = NOT_CONNECTED,
+    UART0_TX  = NOT_CONNECTED,
+    UART0_CTS = NOT_CONNECTED,
+    UART0_RTS = NOT_CONNECTED,
+
+    UART1_RX  = P0_11,
+    UART1_TX  = P0_9,
+    UART1_CTS = P0_10,
+    UART1_RTS = P0_8,
+
+    RX_PIN_NUMBER  = p11,
+    TX_PIN_NUMBER  = p9,
+    CTS_PIN_NUMBER = p10,
+    RTS_PIN_NUMBER = p8,
+
+
+    UART2_RX  = NOT_CONNECTED,
+    UART2_TX  = NOT_CONNECTED,
+    UART2_CTS = NOT_CONNECTED,
+    UART2_RTS = NOT_CONNECTED,
+
+    // I2C pins
+    I2C0_SCL = P0_20,
+    I2C0_SDA = P0_19,
+
+    I2C1_SCL = P0_30,
+    I2C1_SDA = P0_29,
+
+    I2C2_SCL = NOT_CONNECTED,
+    I2C2_SDA = NOT_CONNECTED,
+
+    // SPI pins
+    SPI0_SCK  = P0_18,
+    SPI0_MOSI = P0_15,
+    SPI0_MISO = P0_16,
+    SPI0_SS0  = P0_17,
+    SPI0_SS1  = P0_14,
+    SPI0_SS2  = P0_13,
+
+    SPI1_SCK  = P0_25,
+    SPI1_MOSI = P0_23,
+    SPI1_MISO = P0_24,
+    SPI1_SS0  = P0_22,
+    SPI1_SS1  = P0_21,
+    SPI1_SS2  = P0_28,
+
+    SPI2_SCK  = NOT_CONNECTED,
+    SPI2_MOSI = NOT_CONNECTED,
+    SPI2_MISO = NOT_CONNECTED,
+    SPI2_SS0  = NOT_CONNECTED,
+    SPI2_SS1  = NOT_CONNECTED,
+    SPI2_SS2  = NOT_CONNECTED,
+
+    SPI3_SCK  = NOT_CONNECTED,
+    SPI3_MOSI = NOT_CONNECTED,
+    SPI3_MISO = NOT_CONNECTED,
+    SPI3_SS0  = NOT_CONNECTED,
+    SPI3_SS1  = NOT_CONNECTED,
+    SPI3_SS2  = NOT_CONNECTED,
+
+    // SWD UART
+    SWD_TGT_TX  = UART1_TX,
+    SWD_TGT_RX  = UART1_RX,
+    SWD_TGT_CTS = UART1_CTS,
+    SWD_TGT_RTS = UART1_RTS,
+
+    // Generics
+    SERIAL_TX = UART1_TX,
+    SERIAL_RX = UART1_RX,
+    I2C_SCL = I2C0_SCL,
+    I2C_SDA = I2C0_SDA,
+    SPI_MOSI = SPI0_MOSI,
+    SPI_MISO = SPI0_MISO,
+    SPI_SCK = SPI0_SCK,
+    SPI_CS = SPI0_SS0,
+    PWM_OUT = PWM0,
+
+    // Not connected
+    NC = NOT_CONNECTED
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif