The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/PinNames.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/PinNames.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,251 @@ +/* + * Copyright (c) 2013 Nordic Semiconductor ASA + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * 2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA + * integrated circuit in a product or a software update for such product, must reproduce + * the above copyright notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the distribution. + * + * 3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be + * used to endorse or promote products derived from this software without specific prior + * written permission. + * + * 4. This software, with or without modification, must only be used with a + * Nordic Semiconductor ASA integrated circuit. + * + * 5. Any software provided in binary or object form under this license must not be reverse + * engineered, decompiled, modified and/or disassembled. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define NOT_CONNECTED (int)0xFFFFFFFF +#define PORT_SHIFT 3 + +typedef enum { + p0 = 0, + p1 = 1, + p2 = 2, + p3 = 3, + p4 = 4, + p5 = 5, + p6 = 6, + p7 = 7, + p8 = 8, + p9 = 9, + p10 = 10, + p11 = 11, + p12 = 12, + p13 = 13, + p14 = 14, + p15 = 15, + p16 = 16, + p17 = 17, + p18 = 18, + p19 = 19, + p20 = 20, + p21 = 21, + p22 = 22, + p23 = 23, + p24 = 24, + p25 = 25, + p26 = 26, + p27 = 27, + p28 = 28, + p29 = 29, + p30 = 30, + + P0_0 = p0, + P0_1 = p1, + P0_2 = p2, + P0_3 = p3, + P0_4 = p4, + P0_5 = p5, + P0_6 = p6, + P0_7 = p7, + + P0_8 = p8, + P0_9 = p9, + P0_10 = p10, + P0_11 = p11, + P0_12 = p12, + P0_13 = p13, + P0_14 = p14, + P0_15 = p15, + + P0_16 = p16, + P0_17 = p17, + P0_18 = p18, + P0_19 = p19, + P0_20 = p20, + P0_21 = p21, + P0_22 = p22, + P0_23 = p23, + + P0_24 = p24, + P0_25 = p25, + P0_26 = p26, + P0_27 = p27, + P0_28 = p28, + P0_29 = p29, + P0_30 = p30, + + // Analog + A0 = P0_1, + A1 = P0_2, + A2 = P0_3, + A3 = P0_4, + + // General Pin Input Output (GPIO) + GPIO0 = P0_5, + GPIO1 = P0_7, + GPIO2 = P0_12, + GPIO3 = NOT_CONNECTED, + GPIO4 = NOT_CONNECTED, + GPIO5 = NOT_CONNECTED, + GPIO6 = NOT_CONNECTED, + + //Purse Width Modulation (PWM) + PWM0 = GPIO2, + PWM1 = GPIO3, + PWM2 = GPIO0, + PWM3 = GPIO1, + + // LEDs + LED0 = GPIO0, + LED1 = GPIO1, + LED2 = GPIO2, + + LED_RED = LED0, + LED_GREEN = LED1, + LED_BLUE = LED2, + + // USB bridge and SWD UART connected UART pins + USBTX = P0_9, + USBRX = P0_11, + + // UART pins + UART0_RX = NOT_CONNECTED, + UART0_TX = NOT_CONNECTED, + UART0_CTS = NOT_CONNECTED, + UART0_RTS = NOT_CONNECTED, + + UART1_RX = P0_11, + UART1_TX = P0_9, + UART1_CTS = P0_10, + UART1_RTS = P0_8, + + RX_PIN_NUMBER = p11, + TX_PIN_NUMBER = p9, + CTS_PIN_NUMBER = p10, + RTS_PIN_NUMBER = p8, + + + UART2_RX = NOT_CONNECTED, + UART2_TX = NOT_CONNECTED, + UART2_CTS = NOT_CONNECTED, + UART2_RTS = NOT_CONNECTED, + + // I2C pins + I2C0_SCL = P0_20, + I2C0_SDA = P0_19, + + I2C1_SCL = P0_30, + I2C1_SDA = P0_29, + + I2C2_SCL = NOT_CONNECTED, + I2C2_SDA = NOT_CONNECTED, + + // SPI pins + SPI0_SCK = P0_18, + SPI0_MOSI = P0_15, + SPI0_MISO = P0_16, + SPI0_SS0 = P0_17, + SPI0_SS1 = P0_14, + SPI0_SS2 = P0_13, + + SPI1_SCK = P0_25, + SPI1_MOSI = P0_23, + SPI1_MISO = P0_24, + SPI1_SS0 = P0_22, + SPI1_SS1 = P0_21, + SPI1_SS2 = P0_28, + + SPI2_SCK = NOT_CONNECTED, + SPI2_MOSI = NOT_CONNECTED, + SPI2_MISO = NOT_CONNECTED, + SPI2_SS0 = NOT_CONNECTED, + SPI2_SS1 = NOT_CONNECTED, + SPI2_SS2 = NOT_CONNECTED, + + SPI3_SCK = NOT_CONNECTED, + SPI3_MOSI = NOT_CONNECTED, + SPI3_MISO = NOT_CONNECTED, + SPI3_SS0 = NOT_CONNECTED, + SPI3_SS1 = NOT_CONNECTED, + SPI3_SS2 = NOT_CONNECTED, + + // SWD UART + SWD_TGT_TX = UART1_TX, + SWD_TGT_RX = UART1_RX, + SWD_TGT_CTS = UART1_CTS, + SWD_TGT_RTS = UART1_RTS, + + // Generics + SERIAL_TX = UART1_TX, + SERIAL_RX = UART1_RX, + I2C_SCL = I2C0_SCL, + I2C_SDA = I2C0_SDA, + SPI_MOSI = SPI0_MOSI, + SPI_MISO = SPI0_MISO, + SPI_SCK = SPI0_SCK, + SPI_CS = SPI0_SS0, + PWM_OUT = PWM0, + + // Not connected + NC = NOT_CONNECTED +} PinName; + +typedef enum { + PullNone = 0, + PullDown = 1, + PullUp = 3, + PullDefault = PullUp +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif