The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Revision:
171:3a7713b1edbc
Parent:
145:64910690c574
diff -r e95d10626187 -r 3a7713b1edbc TARGET_KL82Z/TOOLCHAIN_IAR/fsl_trng.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL82Z/TOOLCHAIN_IAR/fsl_trng.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2015-2016, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_TRNG_DRIVER_H_
+#define _FSL_TRNG_DRIVER_H_
+
+#include "fsl_common.h"
+
+#if defined(FSL_FEATURE_SOC_TRNG_COUNT) && FSL_FEATURE_SOC_TRNG_COUNT
+
+/*!
+ * @addtogroup trng_driver
+ * @{
+ */
+
+
+/*******************************************************************************
+ * Definitions
+ *******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief TRNG driver version 2.0.1. 
+ *
+ * Current version: 2.0.1
+ *
+ * Change log:
+ * - Version 2.0.1
+ *   - add support for KL8x and KL28Z
+ *   - update default OSCDIV for K81 to divide by 2
+ */
+#define FSL_TRNG_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/*! @brief TRNG sample mode. Used by trng_config_t. */
+typedef enum _trng_sample_mode
+{
+    kTRNG_SampleModeVonNeumann = 0U, /*!< Use von Neumann data in both Entropy shifter and Statistical Checker. */
+    kTRNG_SampleModeRaw = 1U,        /*!< Use raw data into both Entropy shifter and Statistical Checker. */
+    kTRNG_SampleModeVonNeumannRaw =
+        2U /*!< Use von Neumann data in Entropy shifter. Use raw data into Statistical Checker. */
+} trng_sample_mode_t;
+
+/*! @brief TRNG clock mode. Used by trng_config_t. */
+typedef enum _trng_clock_mode
+{
+    kTRNG_ClockModeRingOscillator = 0U, /*!< Ring oscillator is used to operate the TRNG (default). */
+    kTRNG_ClockModeSystem = 1U          /*!< System clock is used to operate the TRNG. This is for test use only, and
+                                           indeterminate results may occur. */
+} trng_clock_mode_t;
+
+/*! @brief TRNG ring oscillator divide. Used by trng_config_t. */
+typedef enum _trng_ring_osc_div
+{
+    kTRNG_RingOscDiv0 = 0U, /*!< Ring oscillator with no divide */
+    kTRNG_RingOscDiv2 = 1U, /*!< Ring oscillator divided-by-2. */
+    kTRNG_RingOscDiv4 = 2U, /*!< Ring oscillator divided-by-4. */
+    kTRNG_RingOscDiv8 = 3U  /*!< Ring oscillator divided-by-8. */
+} trng_ring_osc_div_t;
+
+/*! @brief Data structure for definition of statistical check limits. Used by trng_config_t. */
+typedef struct _trng_statistical_check_limit
+{
+    uint32_t maximum; /*!< Maximum limit.*/
+    uint32_t minimum; /*!< Minimum limit.*/
+} trng_statistical_check_limit_t;
+
+/*!
+ * @brief Data structure for the TRNG initialization
+ *
+ * This structure initializes the TRNG by calling the the TRNG_Init() function.
+ * It contains all TRNG configurations.
+ */
+typedef struct _trng_user_config
+{
+    bool lock;                      /*!< @brief Disable programmability of TRNG registers.  */
+    trng_clock_mode_t clockMode;    /*!< @brief Clock mode used to operate TRNG.*/
+    trng_ring_osc_div_t ringOscDiv; /*!< @brief Ring oscillator divide used by TRNG. */
+    trng_sample_mode_t sampleMode;  /*!< @brief Sample mode of the TRNG ring oscillator. */
+    /* Seed Control*/
+    uint16_t
+        entropyDelay; /*!< @brief Entropy Delay. Defines the length (in system clocks) of each Entropy sample taken. */
+    uint16_t sampleSize; /*!< @brief Sample Size. Defines the total number of Entropy samples that will be taken during
+                            Entropy generation. */
+    uint16_t
+        sparseBitLimit; /*!< @brief Sparse Bit Limit which defines the maximum number of
+                        * consecutive samples that may be discarded before an error is generated.
+                        * This limit is used only for during von Neumann sampling (enabled by TRNG_HAL_SetSampleMode()).
+                        * Samples are discarded if two consecutive raw samples are both 0 or both 1. If
+                        * this discarding occurs for a long period of time, it indicates that there is
+                        * insufficient Entropy. */
+    /* Statistical Check Parameters.*/
+    uint8_t retryCount;      /*!< @brief Retry count. It defines the number of times a statistical check may fails
+                             * during the TRNG Entropy Generation before generating an error. */
+    uint8_t longRunMaxLimit; /*!< @brief Largest allowable number of consecutive samples of all 1, or all 0,
+                             * that is allowed during the Entropy generation. */
+    trng_statistical_check_limit_t
+        monobitLimit; /*!< @brief Maximum and minimum limits for statistical check of number of ones/zero detected
+                         during entropy generation. */
+    trng_statistical_check_limit_t
+        runBit1Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 1
+                         detected during entropy generation. */
+    trng_statistical_check_limit_t
+        runBit2Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 2
+                         detected during entropy generation. */
+    trng_statistical_check_limit_t
+        runBit3Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 3
+                         detected during entropy generation. */
+    trng_statistical_check_limit_t
+        runBit4Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 4
+                         detected during entropy generation. */
+    trng_statistical_check_limit_t
+        runBit5Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 5
+                         detected during entropy generation. */
+    trng_statistical_check_limit_t runBit6PlusLimit; /*!< @brief Maximum and minimum limits for statistical check of
+                                                        number of runs of length 6 or more detected during entropy
+                                                        generation. */
+    trng_statistical_check_limit_t
+        pokerLimit; /*!< @brief Maximum and minimum limits for statistical check of "Poker Test". */
+    trng_statistical_check_limit_t
+        frequencyCountLimit; /*!< @brief Maximum and minimum limits for statistical check of entropy sample frequency
+                                count. */
+} trng_config_t;
+
+/*******************************************************************************
+ * API
+ *******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief Initializes user configuration structure to default.
+ *
+ * This function initializes the configure structure to default value. the default
+ * value are:
+ * @code
+ *     user_config->lock = 0;
+ *     user_config->clockMode = kTRNG_ClockModeRingOscillator;
+ *     user_config->ringOscDiv = kTRNG_RingOscDiv0;  Or  to other kTRNG_RingOscDiv[2|8] depending on platform.
+ *     user_config->sampleMode = kTRNG_SampleModeRaw;
+ *     user_config->entropyDelay = 3200;
+ *     user_config->sampleSize = 2500;
+ *     user_config->sparseBitLimit = TRNG_USER_CONFIG_DEFAULT_SPARSE_BIT_LIMIT;
+ *     user_config->retryCount = 63;
+ *     user_config->longRunMaxLimit = 34;
+ *     user_config->monobitLimit.maximum = 1384;
+ *     user_config->monobitLimit.minimum = 1116;
+ *     user_config->runBit1Limit.maximum = 405;
+ *     user_config->runBit1Limit.minimum = 227;
+ *     user_config->runBit2Limit.maximum = 220;
+ *     user_config->runBit2Limit.minimum = 98;
+ *     user_config->runBit3Limit.maximum = 125;
+ *     user_config->runBit3Limit.minimum = 37;
+ *     user_config->runBit4Limit.maximum = 75;
+ *     user_config->runBit4Limit.minimum = 11;
+ *     user_config->runBit5Limit.maximum = 47;
+ *     user_config->runBit5Limit.minimum = 1;
+ *     user_config->runBit6PlusLimit.maximum = 47;
+ *     user_config->runBit6PlusLimit.minimum = 1;
+ *     user_config->pokerLimit.maximum = 26912;
+ *     user_config->pokerLimit.minimum = 24445;
+ *     user_config->frequencyCountLimit.maximum = 25600;
+ *     user_config->frequencyCountLimit.minimum = 1600;
+ * @endcode
+ *
+ * @param user_config   User configuration structure.
+ * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error.
+ */
+status_t TRNG_GetDefaultConfig(trng_config_t *userConfig);
+
+/*!
+ * @brief Initializes the TRNG.
+ *
+ * This function initializes the TRNG.
+ * When called, the TRNG entropy generation starts immediately.
+ *
+ * @param base  TRNG base address
+ * @param userConfig    Pointer to initialize configuration structure.
+ * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error.
+ */
+status_t TRNG_Init(TRNG_Type *base, const trng_config_t *userConfig);
+
+/*!
+ * @brief Shuts down the TRNG.
+ *
+ * This function shuts down the TRNG.
+ *
+ * @param base  TRNG base address
+ */
+void TRNG_Deinit(TRNG_Type *base);
+
+/*!
+ * @brief Gets random data.
+ *
+ * This function gets random data from the TRNG.
+ *
+ * @param base  TRNG base address
+ * @param data  Pointer address used to store random data
+ * @param dataSize  Size of the buffer pointed by the data parameter
+ * @return random data
+ */
+status_t TRNG_GetRandomData(TRNG_Type *base, void *data, size_t dataSize);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* FSL_FEATURE_SOC_TRNG_COUNT */
+#endif /*_FSL_TRNG_H_*/