The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_KL82Z/TOOLCHAIN_IAR/fsl_trng.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 145:64910690c574
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_KL82Z/TOOLCHAIN_IAR/fsl_trng.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,239 @@ +/* + * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * + * o Redistributions of source code must retain the above copyright notice, this list + * of conditions and the following disclaimer. + * + * o Redistributions in binary form must reproduce the above copyright notice, this + * list of conditions and the following disclaimer in the documentation and/or + * other materials provided with the distribution. + * + * o Neither the name of Freescale Semiconductor, Inc. nor the names of its + * contributors may be used to endorse or promote products derived from this + * software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _FSL_TRNG_DRIVER_H_ +#define _FSL_TRNG_DRIVER_H_ + +#include "fsl_common.h" + +#if defined(FSL_FEATURE_SOC_TRNG_COUNT) && FSL_FEATURE_SOC_TRNG_COUNT + +/*! + * @addtogroup trng_driver + * @{ + */ + + +/******************************************************************************* + * Definitions + *******************************************************************************/ + +/*! @name Driver version */ +/*@{*/ +/*! @brief TRNG driver version 2.0.1. + * + * Current version: 2.0.1 + * + * Change log: + * - Version 2.0.1 + * - add support for KL8x and KL28Z + * - update default OSCDIV for K81 to divide by 2 + */ +#define FSL_TRNG_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) +/*@}*/ + +/*! @brief TRNG sample mode. Used by trng_config_t. */ +typedef enum _trng_sample_mode +{ + kTRNG_SampleModeVonNeumann = 0U, /*!< Use von Neumann data in both Entropy shifter and Statistical Checker. */ + kTRNG_SampleModeRaw = 1U, /*!< Use raw data into both Entropy shifter and Statistical Checker. */ + kTRNG_SampleModeVonNeumannRaw = + 2U /*!< Use von Neumann data in Entropy shifter. Use raw data into Statistical Checker. */ +} trng_sample_mode_t; + +/*! @brief TRNG clock mode. Used by trng_config_t. */ +typedef enum _trng_clock_mode +{ + kTRNG_ClockModeRingOscillator = 0U, /*!< Ring oscillator is used to operate the TRNG (default). */ + kTRNG_ClockModeSystem = 1U /*!< System clock is used to operate the TRNG. This is for test use only, and + indeterminate results may occur. */ +} trng_clock_mode_t; + +/*! @brief TRNG ring oscillator divide. Used by trng_config_t. */ +typedef enum _trng_ring_osc_div +{ + kTRNG_RingOscDiv0 = 0U, /*!< Ring oscillator with no divide */ + kTRNG_RingOscDiv2 = 1U, /*!< Ring oscillator divided-by-2. */ + kTRNG_RingOscDiv4 = 2U, /*!< Ring oscillator divided-by-4. */ + kTRNG_RingOscDiv8 = 3U /*!< Ring oscillator divided-by-8. */ +} trng_ring_osc_div_t; + +/*! @brief Data structure for definition of statistical check limits. Used by trng_config_t. */ +typedef struct _trng_statistical_check_limit +{ + uint32_t maximum; /*!< Maximum limit.*/ + uint32_t minimum; /*!< Minimum limit.*/ +} trng_statistical_check_limit_t; + +/*! + * @brief Data structure for the TRNG initialization + * + * This structure initializes the TRNG by calling the the TRNG_Init() function. + * It contains all TRNG configurations. + */ +typedef struct _trng_user_config +{ + bool lock; /*!< @brief Disable programmability of TRNG registers. */ + trng_clock_mode_t clockMode; /*!< @brief Clock mode used to operate TRNG.*/ + trng_ring_osc_div_t ringOscDiv; /*!< @brief Ring oscillator divide used by TRNG. */ + trng_sample_mode_t sampleMode; /*!< @brief Sample mode of the TRNG ring oscillator. */ + /* Seed Control*/ + uint16_t + entropyDelay; /*!< @brief Entropy Delay. Defines the length (in system clocks) of each Entropy sample taken. */ + uint16_t sampleSize; /*!< @brief Sample Size. Defines the total number of Entropy samples that will be taken during + Entropy generation. */ + uint16_t + sparseBitLimit; /*!< @brief Sparse Bit Limit which defines the maximum number of + * consecutive samples that may be discarded before an error is generated. + * This limit is used only for during von Neumann sampling (enabled by TRNG_HAL_SetSampleMode()). + * Samples are discarded if two consecutive raw samples are both 0 or both 1. If + * this discarding occurs for a long period of time, it indicates that there is + * insufficient Entropy. */ + /* Statistical Check Parameters.*/ + uint8_t retryCount; /*!< @brief Retry count. It defines the number of times a statistical check may fails + * during the TRNG Entropy Generation before generating an error. */ + uint8_t longRunMaxLimit; /*!< @brief Largest allowable number of consecutive samples of all 1, or all 0, + * that is allowed during the Entropy generation. */ + trng_statistical_check_limit_t + monobitLimit; /*!< @brief Maximum and minimum limits for statistical check of number of ones/zero detected + during entropy generation. */ + trng_statistical_check_limit_t + runBit1Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 1 + detected during entropy generation. */ + trng_statistical_check_limit_t + runBit2Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 2 + detected during entropy generation. */ + trng_statistical_check_limit_t + runBit3Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 3 + detected during entropy generation. */ + trng_statistical_check_limit_t + runBit4Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 4 + detected during entropy generation. */ + trng_statistical_check_limit_t + runBit5Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 5 + detected during entropy generation. */ + trng_statistical_check_limit_t runBit6PlusLimit; /*!< @brief Maximum and minimum limits for statistical check of + number of runs of length 6 or more detected during entropy + generation. */ + trng_statistical_check_limit_t + pokerLimit; /*!< @brief Maximum and minimum limits for statistical check of "Poker Test". */ + trng_statistical_check_limit_t + frequencyCountLimit; /*!< @brief Maximum and minimum limits for statistical check of entropy sample frequency + count. */ +} trng_config_t; + +/******************************************************************************* + * API + *******************************************************************************/ + +#if defined(__cplusplus) +extern "C" { +#endif + +/*! + * @brief Initializes user configuration structure to default. + * + * This function initializes the configure structure to default value. the default + * value are: + * @code + * user_config->lock = 0; + * user_config->clockMode = kTRNG_ClockModeRingOscillator; + * user_config->ringOscDiv = kTRNG_RingOscDiv0; Or to other kTRNG_RingOscDiv[2|8] depending on platform. + * user_config->sampleMode = kTRNG_SampleModeRaw; + * user_config->entropyDelay = 3200; + * user_config->sampleSize = 2500; + * user_config->sparseBitLimit = TRNG_USER_CONFIG_DEFAULT_SPARSE_BIT_LIMIT; + * user_config->retryCount = 63; + * user_config->longRunMaxLimit = 34; + * user_config->monobitLimit.maximum = 1384; + * user_config->monobitLimit.minimum = 1116; + * user_config->runBit1Limit.maximum = 405; + * user_config->runBit1Limit.minimum = 227; + * user_config->runBit2Limit.maximum = 220; + * user_config->runBit2Limit.minimum = 98; + * user_config->runBit3Limit.maximum = 125; + * user_config->runBit3Limit.minimum = 37; + * user_config->runBit4Limit.maximum = 75; + * user_config->runBit4Limit.minimum = 11; + * user_config->runBit5Limit.maximum = 47; + * user_config->runBit5Limit.minimum = 1; + * user_config->runBit6PlusLimit.maximum = 47; + * user_config->runBit6PlusLimit.minimum = 1; + * user_config->pokerLimit.maximum = 26912; + * user_config->pokerLimit.minimum = 24445; + * user_config->frequencyCountLimit.maximum = 25600; + * user_config->frequencyCountLimit.minimum = 1600; + * @endcode + * + * @param user_config User configuration structure. + * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. + */ +status_t TRNG_GetDefaultConfig(trng_config_t *userConfig); + +/*! + * @brief Initializes the TRNG. + * + * This function initializes the TRNG. + * When called, the TRNG entropy generation starts immediately. + * + * @param base TRNG base address + * @param userConfig Pointer to initialize configuration structure. + * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. + */ +status_t TRNG_Init(TRNG_Type *base, const trng_config_t *userConfig); + +/*! + * @brief Shuts down the TRNG. + * + * This function shuts down the TRNG. + * + * @param base TRNG base address + */ +void TRNG_Deinit(TRNG_Type *base); + +/*! + * @brief Gets random data. + * + * This function gets random data from the TRNG. + * + * @param base TRNG base address + * @param data Pointer address used to store random data + * @param dataSize Size of the buffer pointed by the data parameter + * @return random data + */ +status_t TRNG_GetRandomData(TRNG_Type *base, void *data, size_t dataSize); + +#if defined(__cplusplus) +} +#endif + +/*! @}*/ + +#endif /* FSL_FEATURE_SOC_TRNG_COUNT */ +#endif /*_FSL_TRNG_H_*/