Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_nvic.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/nrf_nvic.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,486 @@
+/* 
+ * Copyright (c) 2000 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+/**
+ * @defgroup nrf_nvic_api SoftDevice NVIC API
+ * @{
+ *
+ * @note In order to use this module, the following code has to be added to a .c file:
+ *     \code
+ *     nrf_nvic_state_t nrf_nvic_state;
+ *     \endcode
+ *
+ * @note Definitions and declarations starting with __ (double underscore) in this header file are
+ * not intended for direct use by the application.
+ *
+ * @brief APIs for the accessing NVIC when using a SoftDevice.
+ *
+ */
+
+#ifndef NRF_NVIC_H__
+#define NRF_NVIC_H__
+
+#include <stdint.h>
+#include "nrf.h"
+
+#include "nrf_error_soc.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**@addtogroup NRF_NVIC_DEFINES Defines
+ * @{ */
+
+/**@defgroup NRF_NVIC_ISER_DEFINES SoftDevice NVIC internal definitions
+ * @{ */
+
+#define __NRF_NVIC_NVMC_IRQn (30) /**< The peripheral ID of the NVMC. IRQ numbers are used to identify peripherals, but the NVMC doesn't have an IRQ number in the MDK. */
+
+#ifdef NRF51
+  #define __NRF_NVIC_ISER_COUNT (1) /**< The number of ISER/ICER registers in the NVIC that are used. */
+
+  /**@brief Interrupts used by the SoftDevice. */
+  #define __NRF_NVIC_SD_IRQS_0 ((uint32_t)( \
+        (1U << POWER_CLOCK_IRQn) \
+      | (1U << RADIO_IRQn) \
+      | (1U << RTC0_IRQn) \
+      | (1U << TIMER0_IRQn) \
+      | (1U << RNG_IRQn) \
+      | (1U << ECB_IRQn) \
+      | (1U << CCM_AAR_IRQn) \
+      | (1U << TEMP_IRQn) \
+      | (1U << __NRF_NVIC_NVMC_IRQn) \
+      | (1U << (uint32_t)SWI4_IRQn) \
+      | (1U << (uint32_t)SWI5_IRQn) \
+    ))
+
+  /**@brief Interrupts available for to application. */
+  #define __NRF_NVIC_APP_IRQS_0 (~__NRF_NVIC_SD_IRQS_0)
+#endif
+
+#ifdef NRF52
+  #define __NRF_NVIC_ISER_COUNT (2) /**< The number of ISER/ICER registers in the NVIC that are used. */
+
+  /**@brief Interrupts used by the SoftDevice. */
+  #define __NRF_NVIC_SD_IRQS_0 ((uint32_t)( \
+        (1U << POWER_CLOCK_IRQn) \
+      | (1U << RADIO_IRQn) \
+      | (1U << RTC0_IRQn) \
+      | (1U << TIMER0_IRQn) \
+      | (1U << RNG_IRQn) \
+      | (1U << ECB_IRQn) \
+      | (1U << CCM_AAR_IRQn) \
+      | (1U << TEMP_IRQn) \
+      | (1U << __NRF_NVIC_NVMC_IRQn) \
+      | (1U << (uint32_t)SWI4_EGU4_IRQn) \
+      | (1U << (uint32_t)SWI5_EGU5_IRQn) \
+    ))
+  #define __NRF_NVIC_SD_IRQS_1 ((uint32_t)0)
+
+  /**@brief Interrupts available for to application. */
+  #define __NRF_NVIC_APP_IRQS_0 (~__NRF_NVIC_SD_IRQS_0)
+  #define __NRF_NVIC_APP_IRQS_1 (~__NRF_NVIC_SD_IRQS_1)
+#endif
+/**@} */
+
+/**@} */
+
+/**@addtogroup NRF_NVIC_VARIABLES Variables
+ * @{ */
+
+/**@brief Type representing the state struct for the SoftDevice NVIC module. */
+typedef struct
+{
+  uint32_t volatile __irq_masks[__NRF_NVIC_ISER_COUNT]; /**< IRQs enabled by the application in the NVIC. */
+  uint32_t volatile __cr_flag;                          /**< Non-zero if already in a critical region */
+} nrf_nvic_state_t;
+
+/**@brief Variable keeping the state for the SoftDevice NVIC module. This must be declared in an
+ * application source file. */
+extern nrf_nvic_state_t nrf_nvic_state;
+
+/**@} */
+
+/**@addtogroup NRF_NVIC_INTERNAL_FUNCTIONS SoftDevice NVIC internal functions
+ * @{ */
+
+/**@brief Disables IRQ interrupts globally, including the SoftDevice's interrupts.
+ *
+ * @retval  The value of PRIMASK prior to disabling the interrupts.
+ */
+static inline int __sd_nvic_irq_disable(void)
+{
+  int pm = __get_PRIMASK();
+  __disable_irq();
+  return pm;
+}
+
+/**@brief Enables IRQ interrupts globally, including the SoftDevice's interrupts.
+ */
+static inline void __sd_nvic_irq_enable(void)
+{
+  __enable_irq();
+}
+
+/**@brief Checks if IRQn is available to application
+ * @param[in]  IRQn  irq to check
+ *
+ * @retval  1 (true) if the irq to check is available to the application
+ */
+static inline uint32_t __sd_nvic_app_accessible_irq(IRQn_Type IRQn)
+{
+  if (IRQn < 32)
+  {
+    return ((1UL<<IRQn) & __NRF_NVIC_APP_IRQS_0) != 0;
+  }
+#ifdef NRF52
+  else if (IRQn < 64)
+  {
+    return ((1UL<<(IRQn-32)) & __NRF_NVIC_APP_IRQS_1) != 0;
+  }
+#endif
+  else
+  {
+    return 1;
+  }
+}
+
+/**@brief Checks if IRQn is available to application
+ * @param[in]  priority  priority to check
+ *
+ * @retval  1 (true) if the priority to check is available to the application
+ */
+static inline uint32_t __sd_nvic_is_app_accessible_priority(uint32_t priority)
+{
+  if(priority >= (1 << __NVIC_PRIO_BITS))
+  {
+    return 0;
+  }
+#ifdef NRF51
+  if(   priority == 0
+     || priority == 2
+     )
+  {
+    return 0;
+  }
+#endif
+#ifdef NRF52
+  if(   priority == 0
+     || priority == 1
+     || priority == 4
+     || priority == 5
+     )
+  {
+    return 0;
+  }
+#endif
+  return 1;
+}
+
+/**@} */
+
+/**@addtogroup NRF_NVIC_FUNCTIONS SoftDevice NVIC public functions
+ * @{ */
+
+/**@brief Enable External Interrupt.
+ * @note Corresponds to NVIC_EnableIRQ in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in] IRQn See the NVIC_EnableIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt was enabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt has a priority not available for the application.
+ */
+static inline uint32_t sd_nvic_EnableIRQ(IRQn_Type IRQn)
+{
+  if (!__sd_nvic_app_accessible_irq(IRQn))
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+  if (!__sd_nvic_is_app_accessible_priority(NVIC_GetPriority(IRQn)))
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED;
+  }
+
+  if (nrf_nvic_state.__cr_flag)
+  {
+    nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] |= (uint32_t)(1 << ((uint32_t)((int32_t)IRQn) & (uint32_t)0x1F));
+  }
+  else
+  {
+    NVIC_EnableIRQ(IRQn);
+  }
+  return NRF_SUCCESS;
+}
+
+/**@brief  Disable External Interrupt.
+ * @note Corresponds to NVIC_DisableIRQ in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in] IRQn See the NVIC_DisableIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt was disabled.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE The interrupt is not available for the application.
+ */
+static inline uint32_t sd_nvic_DisableIRQ(IRQn_Type IRQn)
+{
+  if (!__sd_nvic_app_accessible_irq(IRQn))
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+
+  if (nrf_nvic_state.__cr_flag)
+  {
+    nrf_nvic_state.__irq_masks[(uint32_t)((int32_t)IRQn) >> 5] &= ~(1UL << ((uint32_t)(IRQn) & 0x1F));
+  }
+  else
+  {
+    NVIC_DisableIRQ(IRQn);
+  }
+
+  return NRF_SUCCESS;
+}
+
+/**@brief  Get Pending Interrupt.
+ * @note Corresponds to NVIC_GetPendingIRQ in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in]   IRQn          See the NVIC_GetPendingIRQ documentation in CMSIS.
+ * @param[out]  p_pending_irq Return value from NVIC_GetPendingIRQ.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+static inline uint32_t sd_nvic_GetPendingIRQ(IRQn_Type IRQn, uint32_t * p_pending_irq)
+{
+  if (__sd_nvic_app_accessible_irq(IRQn))
+  {
+    *p_pending_irq = NVIC_GetPendingIRQ(IRQn);
+    return NRF_SUCCESS;
+  }
+  else
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+}
+
+/**@brief  Set Pending Interrupt.
+ * @note Corresponds to NVIC_SetPendingIRQ in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in] IRQn See the NVIC_SetPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt is set pending.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+static inline uint32_t sd_nvic_SetPendingIRQ(IRQn_Type IRQn)
+{
+  if (__sd_nvic_app_accessible_irq(IRQn))
+  {
+    NVIC_SetPendingIRQ(IRQn);
+    return NRF_SUCCESS;
+  }
+  else
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+}
+
+/**@brief  Clear Pending Interrupt.
+ * @note Corresponds to NVIC_ClearPendingIRQ in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in] IRQn See the NVIC_ClearPendingIRQ documentation in CMSIS.
+ *
+ * @retval ::NRF_SUCCESS The interrupt pending flag is cleared.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ */
+static inline uint32_t sd_nvic_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  if (__sd_nvic_app_accessible_irq(IRQn))
+  {
+    NVIC_ClearPendingIRQ(IRQn);
+    return NRF_SUCCESS;
+  }
+  else
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+}
+
+/**@brief Set Interrupt Priority.
+ * @note Corresponds to NVIC_SetPriority in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ * @pre Priority is valid and not reserved by the stack.
+ *
+ * @param[in] IRQn      See the NVIC_SetPriority documentation in CMSIS.
+ * @param[in] priority  A valid IRQ priority for use by the application.
+ *
+ * @retval ::NRF_SUCCESS The interrupt and priority level is available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE IRQn is not available for the application.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED The interrupt priority is not available for the application.
+ */
+static inline uint32_t sd_nvic_SetPriority(IRQn_Type IRQn, uint32_t priority)
+{
+  if (!__sd_nvic_app_accessible_irq(IRQn))
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+
+  if (!__sd_nvic_is_app_accessible_priority(priority))
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_PRIORITY_NOT_ALLOWED;
+  }
+
+  NVIC_SetPriority(IRQn, (uint32_t)priority);
+  return NRF_SUCCESS;
+}
+
+/**@brief Get Interrupt Priority.
+ * @note Corresponds to NVIC_GetPriority in CMSIS.
+ *
+ * @pre IRQn is valid and not reserved by the stack.
+ *
+ * @param[in]  IRQn         See the NVIC_GetPriority documentation in CMSIS.
+ * @param[out] p_priority   Return value from NVIC_GetPriority.
+ *
+ * @retval ::NRF_SUCCESS The interrupt priority is returned in p_priority.
+ * @retval ::NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE - IRQn is not available for the application.
+ */
+static inline uint32_t sd_nvic_GetPriority(IRQn_Type IRQn, uint32_t * p_priority)
+{
+  if (__sd_nvic_app_accessible_irq(IRQn))
+  {
+    *p_priority = (NVIC_GetPriority(IRQn) & 0xFF);
+    return NRF_SUCCESS;
+  }
+  else
+  {
+    return NRF_ERROR_SOC_NVIC_INTERRUPT_NOT_AVAILABLE;
+  }
+}
+
+/**@brief System Reset.
+ * @note Corresponds to NVIC_SystemReset in CMSIS.
+ *
+ * @retval ::NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN
+ */
+static inline uint32_t sd_nvic_SystemReset(void)
+{
+  NVIC_SystemReset();
+  return NRF_ERROR_SOC_NVIC_SHOULD_NOT_RETURN;
+}
+
+/**@brief Enters critical region.
+ *
+ * @post Application interrupts will be disabled.
+ * @note sd_nvic_critical_region_enter() and ::sd_nvic_critical_region_exit() must be called in matching pairs inside each
+ * execution context
+ * @sa sd_nvic_critical_region_exit
+ *
+ * @retval ::NRF_SUCCESS
+ */
+static inline uint32_t sd_nvic_critical_region_enter(uint8_t * p_is_nested_critical_region)
+{
+  int was_masked = __sd_nvic_irq_disable();
+  if (!nrf_nvic_state.__cr_flag)
+  {
+    nrf_nvic_state.__cr_flag = 1;
+    nrf_nvic_state.__irq_masks[0] = ( NVIC->ICER[0] & __NRF_NVIC_APP_IRQS_0 );
+    NVIC->ICER[0] = __NRF_NVIC_APP_IRQS_0;
+    #ifdef NRF52
+    nrf_nvic_state.__irq_masks[1] = ( NVIC->ICER[1] & __NRF_NVIC_APP_IRQS_1 );
+    NVIC->ICER[1] = __NRF_NVIC_APP_IRQS_1;
+    #endif
+    *p_is_nested_critical_region = 0;
+  }
+  else
+  {
+    *p_is_nested_critical_region = 1;
+  }
+  if (!was_masked)
+  {
+    __sd_nvic_irq_enable();
+  }
+  return NRF_SUCCESS;
+}
+
+/**@brief Exit critical region.
+ *
+ * @pre Application has entered a critical region using ::sd_nvic_critical_region_enter.
+ * @post If not in a nested critical region, the application interrupts will restored to the state before ::sd_nvic_critical_region_enter was called.
+ *
+ * @param[in] is_nested_critical_region If this is set to 1, the critical region won't be exited. @sa sd_nvic_critical_region_enter.
+ *
+ * @retval ::NRF_SUCCESS
+ */
+static inline uint32_t sd_nvic_critical_region_exit(uint8_t is_nested_critical_region)
+{
+  if (nrf_nvic_state.__cr_flag && (is_nested_critical_region == 0))
+  {
+    int was_masked = __sd_nvic_irq_disable();
+    NVIC->ISER[0] = nrf_nvic_state.__irq_masks[0];
+    #ifdef NRF52
+    NVIC->ISER[1] = nrf_nvic_state.__irq_masks[1];
+    #endif
+    nrf_nvic_state.__cr_flag = 0;
+    if (!was_masked)
+    {
+      __sd_nvic_irq_enable();
+    }
+  }
+
+  return NRF_SUCCESS;
+}
+/**@} */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // NRF_NVIC_H__
+
+/**@} */