mbed library sources

Dependents:   Encrypted my_mbed lklk CyaSSL_DTLS_Cellular ... more

Superseded

This library was superseded by mbed-dev - https://os.mbed.com/users/mbed_official/code/mbed-dev/.

Development branch of the mbed library sources. This library is kept in synch with the latest changes from the mbed SDK and it is not guaranteed to work.

If you are looking for a stable and tested release, please import one of the official mbed library releases:

Import librarymbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

targets/hal/TARGET_NXP/TARGET_LPC2460/PeripheralNames.h

Committer:
mbed_official
Date:
2015-09-11
Revision:
621:9c82b0f79f3d
Parent:
554:edd95c0879f8

File content as of revision 621:9c82b0f79f3d:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2015 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_PERIPHERALNAMES_H
#define MBED_PERIPHERALNAMES_H

#include "cmsis.h"

#ifdef __cplusplus
extern "C" {
#endif

typedef enum {
    UART_0 = (int)LPC_UART0_BASE,
    UART_1 = (int)LPC_UART1_BASE,
    UART_2 = (int)LPC_UART2_BASE,
    UART_3 = (int)LPC_UART3_BASE
} UARTName;

typedef enum {
    ADC0_0 = 0,
    ADC0_1,
    ADC0_2,
    ADC0_3,
    ADC0_4,
    ADC0_5,
    ADC0_6,
    ADC0_7
} ADCName;

typedef enum {
    DAC_0 = 0
} DACName;

typedef enum {
    SPI_0 = (int)LPC_SSP0_BASE,
    SPI_1 = (int)LPC_SSP1_BASE
} SPIName;

typedef enum {
    I2C_0 = (int)LPC_I2C0_BASE,
    I2C_1 = (int)LPC_I2C1_BASE,
    I2C_2 = (int)LPC_I2C2_BASE
} I2CName;

typedef enum {
    PWM_1 = 1,
    PWM_2,
    PWM_3,
    PWM_4,
    PWM_5,
    PWM_6
} PWMName;

typedef enum {
     CAN_1 = (int)LPC_CAN1_BASE,
     CAN_2 = (int)LPC_CAN2_BASE
} CANName;

#define STDIO_UART_TX     USBTX
#define STDIO_UART_RX     USBRX
#define STDIO_UART        UART_2

// Default peripherals
#define MBED_SPI0         p5, p6, p7, p8
//#define MBED_SPI1         p11, p12, p13, p14

#define MBED_UART0        p9, p10
#define MBED_UART1        p13, p14
#define MBED_UART2        p15, p16
#define MBED_UARTUSB      USBTX, USBRX

#define MBED_I2C0         p17, p18
//#define MBED_I2C1         p9, p10

#define MBED_CAN0         p19, p20

#define MBED_ANALOGOUT0   p21

#define MBED_ANALOGIN0    p22
#define MBED_ANALOGIN1    p23
//#define MBED_ANALOGIN2    p17
//#define MBED_ANALOGIN3    p18
//#define MBED_ANALOGIN4    p19
//#define MBED_ANALOGIN5    p20

#define MBED_PWMOUT0      p24
#define MBED_PWMOUT1      p25
#define MBED_PWMOUT2      p26
#define MBED_PWMOUT3      p27
//#define MBED_PWMOUT4      p22
//#define MBED_PWMOUT5      p21

#define MBED_USB_D_PLUS   p28
#define MBED_USB_D_MINUS  p29

#define MBED_MCICLK       p30
#define MBED_MCICMD       p31
#define MBED_MCIDAT0      p32
#define MBED_MCIDAT1      p33
#define MBED_MCIDAT2      p34
#define MBED_MCIDAT3      p35

#ifdef __cplusplus
}
#endif

#endif